We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Separating hunters circular saws - machine with workpiece feed device. Machine is fully functional. Saw blade diameter 360 mm Workpiece dimensions 200 x 90 mm flat material Cutting speed 3000 rpm. Voltage: 3 x 380 V 50 Hz Control voltage: 220 V Performance: 11 15 a Machine number: 606 Wiring diagram number: 23.04.052
used
Technical data: Saw blade diameter: 520mm Mitre: 90° / 45° / 30° Drive capacity: 1.6 / 2.8 kW Dimensions: WxDxH 1520x1520x1560mm Working height: 900 mm Weight: 1250kg
used
Technical data: -Saw blade diameter 470 mm -Adjustable miter left + right up to 30 ° -Digital angle display -Cutting capacity 90 ° round 140 mm square 110 mm rectangle 290 x 70 mm round 45 ° 140 mm square 110 mm rectangle 190 x 70 mm at 30 ° round 130 mm -Sägeblattdurchm cutting speeds. 400 mm approx. 22.5 + 45 m / min -Sägeblattdurchm cutting speeds. 470 mm approx. 25 + 50 m / min -Hydr. Horizontal + vertical material clamp -Drive 400 V / 4 kW -Feeding speed of the saw blade, hydr. infinitely variable -Microsprüh - coolant system - space requirement approx. B H 1200 x 1950 x D 1700 mm -Weight 850 kg
used
Hydr. Horizontal long-cut cold circular saw make TRENNJÄGER type PMC 6Machine -No: 282, built in 1989Saw blade diameter: 460 mmCutting height: 150 mmCutting area at 90 °: 650 x 150 mmCutting area at 45 °: 450 x 150 mmWorking height: 850/950 mmExternal dimensions: 2300 x 820 x 1900 mmWeight: 1500 kgWith- 3 vertical hydr. clamping cylinders- miter device- Cooling deviceused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
saw blade diameter: 275 mm cutting diameter: 90 mm capacity 45 degrees: flat: 150 x 100 mm mitter cutting - all-position: 45 ° cutting speed: 16/32 m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Key data: 360 mm
Specifications: Saw blade diameter or dimension 360mm Bore 50mm Mitre cuts up to 45° possible Stop with scale right 2500mm Cutting Areas 90° double T and U-profile 200 x 90 mm 45° double-T and U-profile 140 x 90 mm 90° round steel 120 mm 45° round steel 100 mm 90° square steel 110 mm Bz0turliee 45° square steel 95 mm 90° flat bar 200 x 90 mm 45° flat bar 120 x 90 mm pole-switchable motor --additional speeds by belt reversal Saw blade speeds 17/32-20/40-25/50 m/min Year of construction estimated--no nameplate available--
used
Saw blade diameter: 350 mm cutting capacity at 90 ° round: 90 mm cutting capacity at 90 ° square: 160 x 70 mm section in MITRE at 45 ° rectangle: 120 x 60 / 60 x 80 mm cutting speed: 30 m / min drive motor: 1.1 kW space: 1000 x 1250 x 1380 mm weight: 795 kg
used
Saw blade diameter: 370 mm cutting capacity at 90°: 115 mm cutting capacity at 45°: 115 mm drive motor: 380 V, 4.5 kW space: 1000 x 1200/2200 x 1500 mm weight: approx. 900 kg
used
specifications: - Saw blade diameter up to approx. 450 mm - Cutting range at 90° approx. - 60 x 250 mm - 140 x 120 mm - 100 x 200 mm - in miter at 45° approx. - 60 x 190 mm - 140 x 80 mm - 100 x 160 mm - in miter at 15° approx. - 100 x 60 mm - Miter adjustment left + right - Pneum. Saw blade feed - Saw blade speed 2800 rpm - Drive 400 V / 2.2 kW - Compressed air connection 6 bar - Space requirement approx. W 900 x H 1200 x D 900 mm - Weight approx. 280 kg
used
I sell a continuous double mitre saw with scoring OMGA TI2500 Super, year of construction 2003. Motor 5kW on each side for both main saw and scorer. Working width max. 1200mm Cutting depth (slot length) 2500mm Underpressure for this and light elements 1 pc. on each side. Self pump. Material pressures top 1 pc. on each side. Available same. Fully operational. All errors fixed.
used
Made in Germany Saw blade size: 300 mm Cutting area 90° flat: 160 x 80 mm 45° flat: 120 x 80 mm 90/45° L-iron: 80 x 80 mm 90° U-iron: 160/NP 16 45° U-iron: 120/NP 12 90/45° round: 100 mm 2 saw blade speeds: 40 / 80 rpm. Drive power: 1.4 / 1.9 kW Dimensions L x W x H: 600 x 730 x 1700 mm Weight approx.: 390 kg with - stationary base frame - Cooling device - 1 saw blade installed Connection cable with 16A CEE plug. free domicile within Germany
used
Made in Germany Saw blade size: 300 mm Cutting area 90° flat: 160 x 80 mm 45° flat: 120 x 80 mm 90/45° L-iron: 80 x 80 mm 90° U-iron: 160/NP 16 45° U-iron: 120/NP 12 90/45° round: 100 mm Drive power: 1.4 / 1.9 kW Dimensions L x W x H: 600 x 730 x 1700 mm Weight approx.: 390 kg with - stationary base frame - Cooling device - 1 saw blade installed Connection cable with 16A CEE plug.
used
Made in Germany Saw blade size: 300 mm Saw blade speeds: 40/80 rpm. Cutting area 90° flat: 160 x 80 mm 45° flat: 120 x 80 mm 90/45° L-iron: 80 x 80 mm 90° U-iron: 160/NP 16 45° U-iron: 120/NP 12 90/45° round: 100 mm Drive power: 1.4 / 1.9 kW Dimensions L x W x H: 600 x 730 x 1700 mm Weight approx.: 390 kg with - stationary base frame - Cooling device - 1 saw blade installed Connection cable with 16A CEE plug.
used
Saw blade Ø: 300 mm Cutting range at 90° round: 100 mm Cutting area at 90° rectangle: 120 x 85 mm Mitre cutting area at 45° round: 85 x 85 mm Saw blade speed: 40/80 rpm Cutting speed: Drive motor: 380 V, 1.0/1.2 kW Space requirements: 850 x 520 x 1500 mm Weight: approx. 200 kg
used
Saw blade Ø: 275 mm Cutting range at 90° round: 90 mm Cutting area at 90° rectangle: 75 x 75 mm Mitre cutting area at 45° rectangle: 75 x 75 mm Saw blade speed: 40/80 rpm Drive motor: 380 V, 0.5/0.9 kW Space requirements: 700 x 600 x 1580 mm Weight: approx. 180 kg
new
Cutting capacity round 90°: 150 mm Section flat 90°: 145 x 150 mm Cutting capacity round 45°: 100 mm Section flat 45°: 90 x 150 mm Cutting capacity round 60°: 70 mm Working height: 890 mm Band saw blade dimensions: 1735 x 13 x 0.9 mm Cutting speed, continuous: 20-65 m / min Coolant pump: 100 W Engine power: 0,37 kW Voltage: 230 V Machine dimensions (L x D x H): 1000 x 510 x 1520 mm Approximate weight: 100 kg Features: -Adjustable cutting speed for optimal results -Standard with quick clamping vise and fence -Gearbox with hardened and ground Auger and bronze worm wheel -Fitted with base and coolant system -Ball bearing 3-point blade Guide no seeping effect of blade -For mitre cuts the saw handle is swung (up to 60 °), this space-saving work for long workpieces possible -Twist-free, heavily dimensioned saw bracket Scope of ...
new
Cutting capacity round 90°: 170 mm cutting capacity flat 90°: 140 x 210 mm cutting capacity around 45°: 125 mm section flat 45°: 100 x 125 mm working height: 890 mm band saw blade dimensions: 2080 x 20 x 0,9 mm cutting speed: 20-90 m / min coolant pump S1 100%: 100 W power: 0.75 of kW machine dimensions (L x D x H): 1250 x 540 x 1600 mm weight approx.: 157 kg
new
Cutting capacity round / square 90°: 255 mm / 210 x 210 mm 90° flat cutting area: 310 x 210 mm Cutting capacity round / square 45 ° R: 220 mm / 210 x 210 mm Section flat 45 ° r: 220 x 200 mm Cutting capacity round / square 45 ° L: 230 mm / 200 x 200 mm Cutting capacity 45 ° L: flat 230 x 200 mm Cutting capacity round / square 60 ° R: 135 mm / 135 x 135 mm Section flat 60 ° R: 135 x 135 mm Working height: 930 mm Band saw blade dimensions: 2750 x 27 x 0,9 mm Cutting speed: 35 / 70 m / min Coolant pump: 100 W S1 motor power output 100%: 1.5 kW Motor power S6 40%: 2.2 kW Voltage: 400 V Machine dimensions (L x D x H): 2000 x 1250 x 1900 mm Approximate weight: 350 kg Features: -Professional band saw for General workshop use, fitters... -For cutting of hollow profiles and full materials, ...
used
Cutting speed:-3 gearbox stages + Variogetriebe 15-940 m / min -Overdrive 2350 m / min Plate B x T CA 700 x 600 mm RADIUS approx. 480 mm Cutting height Max approx. 360 mm Space requirements, B x T x H approx. 1.1 x 0.8 m estimated approx. weight 1 to Equipment:-rubber of the two rollers is in good condition -IDEAL band sealer - table Tiltable
used
Max cutting length: 4000 mm Cutting height: 200 mm Cutting width: 130 mm Power: 5,1 kW Weight: 650 kg
used
Used Vertical band saw, make MÖSSNER, good, electrically connected Model SM 420 Masch.-No. 20313 Built in 1972 Technical data: 8 cutting speeds: 12 - 375 m/min Support table B x T approx. 600 x 600 mm Discharge approx. 410 mm Cutting height max. approx. 260 mm Space requirement , W x T x H approx. 1 x 0.8 x 1.95 m (height incl. 9 cm eye screw) Weight estimated approx. 0.6 to Facilities: both rollers are "newly rubberized" / re-occupied IDEAL Tape Welding Machine Table tilted
used
Used Vertical band saw, make MÖSSNER, good, electrically connected Model SSF/500 Masch.-No. 11502 Built in 1963 Technical data: Cut: - 3 gear stages + Vario gearbox 15 - 940 m/min - Fast response 2350 m/min Support table B x T approx. 700 x 600 mm Discharge approx. 480 mm Cutting height max. approx. 360 mm Space requirement , W x T x H approx. 1.1 x 0.8 m Weight estimated approx. 1 to Facilities: Rubbering of both rollers is in good condition IDEAL Tape Welding Machine Table tilted
used
No. 4428: 1 gebr. Horizontal band saw Fabr. SAMUR, type S-1000 V, Bauj. 1966 Arb.-Ber.: 800 mm throughlet width, Accessories: Table Dimensions: 610 x 610 mm Table extension on the left with welding device Other: Cutting height 350 mm Cutting speed 20-800 mm Sheet length: 4,550 mm. Blade width: 4 to 15 mm. Speed infinitely variable Cutting speed: 23-711 m / min Electric motor 380 V
used
Technical data: - Cutting range at 90° around 260 mm - flat 450 x 240 mm - Cutting range at 45° around 230 mm - flat 240 x 200 mm - Machine is mounted on original turnstile - Saw band dimension 3660 x 25 x 0.9 mm - Cutting speeds 20 / 35 / 50 / 70 m/min - Hydr. lifting + lowering the saw frame - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 0.8 kW - Coolant device - Space requirement approx. W 2100 x H 1200 x D 1000 mm - Weight approx. 500 kg
used
Description Universal Vertical band saw of the brand Mössner suitable for tooling, fixture construction, training as well as mold making Extension: 280mm Cutting speed: 24 - 558 m/min Description : The machine comes from a tool factory and has been regularly serviced and has few operating hours. Technical data Year built / YOM 1973 Cutting speed / Cutting speed 24 - 558 m/min Extension / swing 280mm Feeds no Table / Table 500x400mm Machine Weight /Weight ca 350kg Wheel Diameter / Wheel Slide 300mm Dimensions / Dimension 850 x 500 x 1,450 mm