Category: 102 lathes / Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)
Latest update: 20.09.2023 add to watchlist
approved
dealer
item-No.: 160192078
New in: 2020

used

Location: Land-de

add to watchlist

1x Lathe Manufacturer: TOS Type : SUI 80/4000 Year of construction: 2020 Commissioning: 09.2020 Turning length: 4000mm Turning diameter over bed: 800mm Turning diameter via slide: 520mm Speed max: 14-1400rpm Through hole: 92mm Spindle bearing diameter: 140 mm Accessories: - retrofitted frequency converter, - Position indicator 3-AX Heidenhain ND7013, - Quick release head system Multifix D + holder D1D 40180 Machine condition: almost New Delivery time: March 2023

Category: 102 lathes / Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)
Latest update: 01.02.2024 add to watchlist
approved
dealer
item-No.: 163114541

used

Location: Land-cz

add to watchlist

Swing over bed 840 mm Swing over support 530 mm Center distance 2000 mm Spindle bore 82 mm Spindle diameter in front bearing 160 mm Spindle taper - metric 100 Morse Tailstock 6 Maximum workpiece weight at the lowest speed of 6000 kg Largest blade profile 40 x 40 mm Electric motor for headstock drive 18.5 kW Machine dimensions L x W 3420 x 1880 mm Machine weight (according to the spike distance) 5700 kg

Category: 102 lathes / Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)
Latest update: 30.01.2024 add to watchlist
approved
dealer
item-No.: 163245761
New in: 1980

used

check Seller: Beppo Bercht Werkzeugmaschinen
Location: Land-de
Price: VB 2.200 € add to watchlist

Key data: 180 mm, 360 mm, 14 U/min

Center height 180 mm Center width 750 mm Circulation diameter over bed 360 mm Spindle bore 41 mm Spindle speed range, stepped 14 – 2,800 rpm Machine weight 1.9 t Connected load 6.5 kW

Category: 102 lathes / Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)
Latest update: 15.03.2024 add to watchlist
approved
dealer
item-No.: 163582867
New in: 1992

used

check Seller: Mieth Maschinenhandel
Location: 63322 Rödermark Land-de

add to watchlist

Offer 24009 Specifications: - Center height 200 mm - Center width 1500 mm - Maximum circulation – Ø above bed 400 mm - over face carriage 210 mm - Spindle bore 56 mm - Pick-up cone of the tailstock quill MK 5 - Tailstock quill travel 150 mm - Spindle speeds 11 - 2240 rpm - Feeds longitudinal + flat - Metric thread pitches -Thread - Module thread - Diametrically pitsch thread - Drive 400 V / 7.5 kW - 3 jaw chuck - Space requirement approx. W 3300 x H 1600 x D 1200 mm - Weight approx. 2800 kg

Category: 102 lathes / Vertikal Turning Machines (Lathes)
Latest update: 31.08.2023 add to watchlist
approved
dealer
item-No.: 136406403
New in: 1989

used

Location: Land-cz
Price: VB 30.000 € add to watchlist

machine has live spindle for drilling and grinding face plate diameter mm 800 max. workpiece diameter mm 1000 max. workpiece height mm 750 max. diameter of external working mm 1000 Z axe mm 630 face plate revolutions 1 5 – 500 rpm main motor output kW 30 (40) machine dimensions length mm 4900 height mm 3830 width mm 4485 machine weight kg 16000 machine had DRO Tesla NS 642

Category: 102 lathes / Vertikal Turning Machines (Lathes)
Latest update: 30.11.2023 add to watchlist
approved
dealer
item-No.: 145926974
New in: 1986

used

check Seller: ERS MANAGEMENT LTD
Location: Land-ua

add to watchlist

Machine weight: 39,000 kg Faceplate diameter 2000 mm number of supports: 2 pcs. Dimensions : Height 6280 mm width 6600 mm length 4800 mm Extras: Right support with turret head, left and side - sliders. Digital indication of NS 114. Technical condition at the time of sale: Defective rotary amplifier main drive-replacement is required. Require replacement of cables and wires external piping:-machine control cabinets. Repair and adjustment of electrical parts. Not operated since 1994 The maximum dimensions of a workpiece Height 1300 mm Diameter of 2000 mm Weight 15 000 kg

Category: 102 lathes / Carousel Turning Machines (Lathes)
Latest update: 27.03.2024 add to watchlist
approved
dealer
item-No.: 146638988
New in: 1972

used

check Seller: AMARON s.r.o.
Location: 60200 Brno Land-cz

add to watchlist

Largest workpiece height: 630 mm Largest workpiece diameter: 800 mm Largest workpiece weight: 2000 kg Engine power: 40 kW Dimensions: 2600x2500x3700 mm Machine Weight: 10000 Kg Electrical table voltage Electrical rotation of the knife head Shaped copy via template Two-axis measurement Ball screw Suitable for CNC conversion Accessories: Clamping pressure gauges Tools

Category: 102 lathes / Carousel Turning Machines (Lathes)
Latest update: 27.03.2024 add to watchlist
approved
dealer
item-No.: 152835936
New in: 1961

used

check Seller: AMARON s.r.o.
Location: 60200 Brno Land-cz

add to watchlist

Inv. Num: 5411 Type: SK 12 Producer: TOS Created: 1961 Parameters: Table diameter: 1200 mm Max turning diameter: 1300 mm Maximum workpiece weight: 4 t Max workpiece height: 1000 mm Weight: 18.3 t

Category: 102 lathes / Turning Machines (Lathes)
Latest update: 27.03.2024 add to watchlist
item-No.: 158987031
New in: 2022

used

Location: Land-cz

add to watchlist

Circulation diameter over bed ... 500mm Distance between stands ... 2000mm workpiece weight ... 600kg Circulation diameter via support ... 270mm Main engine power ... 5.5kW L x W x H ... 1100 x 3575mm Machine weight ... 1845kg complete general overhaul in 2022, CE certificate, new cover, Machine in good condition, possible to test under power.

Category: 102 lathes / Carousel Turning Machines (Lathes)
Latest update: 27.03.2024 add to watchlist
approved
dealer
item-No.: 160670898
New in: 1982

used

check Seller: AMARON s.r.o.
Location: Land-cz

add to watchlist

Inv. Num. : 6305 Type: SKJ 20 Produzent: TOS Erzeugt: 1982 Parametern: Tischdurchmesser: 2000 mm Maximales Werkstückgewicht: 15000 kg Max. Werkstückhöhe: 1200 mm Maximale Tischdrehzahl: 170 1/min Gewicht: 35000 kg

Category: 102 lathes / Universal Turning Machines (Lathes)
Latest update: 12.03.2024 add to watchlist
approved
dealer
item-No.: 160753562

used

check Seller: Retec Machines S.A.S
Location: Land-fr

add to watchlist

Vertical Lathe Double Column TOS SK16 Maxi turning diameter: 1700 mm Turning height: 1250 mm Rotation: from 3,55 to 150 RPM 4-jaws chuck Ø 1620 mm Chuck crossing diameter: Ø 1620 mm Max workpiece weight: 5000 kg Left vertical slide rame stroke: 900 mm Right Vertical slide ram stroke: 600 mm (turret 5 tools) Right Horizontal slide ram stroke: 500 mm Power: 12 kW Voltage: 380 V Length: 4600 mm Width: 2800 mm (without chuck protectors) Total height in low position: 3800 mm Weight: approx 20 T

Category: 102 lathes / Turning Machines (Lathes)
Latest update: 11.03.2024 add to watchlist
approved
dealer
item-No.: 160983106
New in: 2006

used

check Seller: DenTool LTD
Location: 0 Naestved Land-dk

add to watchlist

Stock number: 3760 LATHE Manufacturer: TRENS - TOS, Type: SN 50C - 2000 Machine NO.: 08005020060214, Year of construction: 2006 Specifications: Turning length 2000 mm Center height 250 mm Turning over bed 500 mm Ø Turning in recess 700 mm Ø Spindle bore 52 mm Ø Spindle speeds 22-2000 rpm Spindle motor power 5.5 kW Accessories: Tailstock Digital display Jenix - Ikke monteret - not mounted dkk 10.000.- Multi-tool holder Centering chuck mm Ø Universal lining mm Ø Fixed bezel mm Ø Length: 3640 mm, Height: 1540 mm, Width: 1100 mm, Weight: 1890 kg

Category: 102 lathes / Carousel Turning Machines (Lathes)
Latest update: 27.03.2024 add to watchlist
approved
dealer
item-No.: 161269342
New in: 1994

used

check Seller: AMARON s.r.o.
Location: Land-cz

add to watchlist

Inv. Num. : 6598 Type: SK 12 Producer: ZPS Created: 1964, GO 1994 Parameters: Table diameter: 1180 mm Clamping plate speed: 5.3-225 1/min Max. turning diameter: 1350 mm Max. workpiece height: 900 mm Max. workpiece weight: 5000 kg Length: 2360 mm Width: 3860 mm Height: 4260 mm Weight: 18300 kg

Category: 102 lathes / Universal Turning Machines (Lathes)
Latest update: 18.10.2023 add to watchlist
approved
dealer
item-No.: 162555498

used

check Seller: Werkzeug Maschinen Service Dirk Kempken
Location: Land-de
Price: 5.500 € add to watchlist

Lathe TOS SUI 40-50 Center width 1500 mm Circulation over machine bed 500 mm Circulation over support 320 mm Spindle speed 14 to 2240 rpm Quick Release - Steel Bracket § Jaw wedge bar chuck Machine is ready for operation and in good condition

Category: 102 lathes / Universal Turning Machines (Lathes)
Latest update: 12.03.2024 add to watchlist
item-No.: 163561043

used

Seller: Maschinenhandel Nord
Location: Land-de
Price: 2.100 € add to watchlist

Lead & Pull Screw Lathe TOS SV 18 RA Year of construction approx. 1980 The machine is in good used condition and works perfectly. Transport or delivery can be arranged. Of course, loading technology is available at the time of collection. Specifications: Center height 180 mm Circumferential diameter over bed 380 mm Circulation diameter over support 215 mm Center width 1000 mm Spindle bore 41 mm Speed range 14 - 2800 rpm. Longitudinal feeds 0.02 - 5.6 mm/rev Feeds flat 0.01 - 2.8 mm/rev metric pitches 0.2 - 140 Inch thread 1/5 - 140/1" DP thread 1 - 224 DF Module thread 0.2 - 70 m Drive power 6.0 kW Dimensions approx. 2200 x 1000 x 1400 mm Weight approx. 1800 kg with -Arbor - Three-jaw lathe chuck - Moving grain tip The machine can be viewed at any time.

Category: 102 lathes / Pointed Turning Automatics (Lathes)
Latest update: 27.03.2024 add to watchlist
approved
dealer
item-No.: 163353941
New in: 1977

used

check Seller: AMARON s.r.o.
Location: Land-cz

add to watchlist

Inv. Num. : 7302 Type: SV 18 RA Producer: TOS Created: 1977, GO 2023 Parameters: Maximum turning length: 1250 mm Maximum turning diameter over bed: 380 mm Maximum turning diameter over support: 215 mm Maximum workpiece weight: 250 kg Equipment: Digital Measurement

Category: 102 lathes / Pointed Turning Automatics (Lathes)
Latest update: 27.03.2024 add to watchlist
approved
dealer
item-No.: 163534416

used

check Seller: AMARON s.r.o.
Location: 60200 Brno Land-cz

add to watchlist

Inv. Num. : 6681 Type: SUS 63/5000 Producer: TOS Generated: Parameters: Maximum turning length: 5000 mm Maximum turning diameter over bed: 655 mm Maximum turning diameter over support: 390 mm Spindle diameter: 82 mm Equipment: Chuck Grasshopper Digital Measurement Knife Fixed bezel Movable bezel

Category: 102 lathes
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 158218667

used

check Seller: Mach4metal
Location: Land-nl

add to watchlist

Center height: 525 mm Center distance: 10000 mm Spindle bore: 122 mm MACH-id     5192 MAKE          TOS Celakovice CZ TYPE            SU 100 H YOP               2004 SPECIFICATIONS Swing over bed Ø     1050 mm Swing over cross slide        730 mm DBC Turning length      10.000 mm Spindle bore         122 mm Bed width         800 mm Quill Ø      150 mm Stroke pinole        200 mm Spindle taper       Mk        5 Mk Workpiece weight       8000 Kg Power     37 kW Feed rate  X-Axis      1000 mm/min. DIMENSIONS Length  ...

Category: 102 lathes
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 158218782

used

check Seller: Mach4metal
Location: Land-nl

add to watchlist

Center height: 250 mm Center distance: 1500 mm Spindle bore: 77 mm MACH-id   4177 MAKE       TOS Trencin TYPE         SN 500 SA YEAR        90 er SPECIFICATIONS Swing over bed Ø 505 mm Swing over cross slide    270 mm Swing in the gap Ø    700 mm Distance between centres    1500 mm Spindle bore    77 mm Spindle speeds / ranges      2000 Rpm Power     5.5 Kw DIMENSIONS Length    3500 mm Width     1400 mm Height      1600 mm

Category: 102 lathes / Other Turning Machines
Latest update: 25.04.2022 add to watchlist
approved
dealer
item-No.: 158794275

used

check Seller: WAHO Werkzeug- und Maschinenhandelsges. mbH
Location: Land-de

add to watchlist

Metal lathe make TOS type SV 18 RAMachine -No: 018100830833, year of construction approx. 1980Technical specifications:Distance between centers: 1000 mmCenter height: 180 mmCircumferential diameter over bed: 380 mmCircumference diameter over support: 215 mmSpindle bore: 41 mmSpeed range: 14 - 2800 rpm.Longitudinal feeds: 0.02 - 5.6 mm / revFlat feeds: 0.01 - 2.8 mm / revmetric pitches: 0.2 - 140Inch thread: 1/5 - 140/1 DP thread: 1 - 224 DFModule thread: 0.2 - 70 M.Drive power: 6.0 kWDimensions approx: 2200 x 1000 x 1400 mmWeight approx: 1800 kgWith- Steel holder- three-jaw lathe chuck- moving center pointused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. Wa ...

Category: 102 lathes
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163484936
New in: 1986

used

check Seller: GINDUMAC GmbH
Location: Land-hu

add to watchlist

This TOS Sm 16-A Lathe was manufactured in the year 1986 in Czech Republic.

Category: 102 lathes
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 158218453

used

check Seller: Mach4metal
Location: Land-nl

add to watchlist

Center height: 255 mm Center distance: 2000 mm Spindle bore: 78 mm TOS - SN 500 SA Universal turning lathe Ø 505 x 2000 mm MACH - ID 6328 Make: TOS Type: SN 500 SA YOP : 2003 Swing over bed Ø   505 mm Swing over cross slide Ø    270 mm Swing in the gap Ø     700 mm DBC Turning Length    2.000 mm Gap length    230 mm Spindle bore     78 mm Spindle power     7,5 kW Stroke pinole      180 mm Spindle taper      5 Mk Speeds / ranges     2000 Rpm Dimensions Length       3.800 mm Width         1.800 mm Height       1.600 mm Weight      2.000 kg

Category: 102 lathes
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 158218472

used

check Seller: Mach4metal
Location: Land-nl

add to watchlist

Turning diameter: 630 mm Turning length: 1000 mm Turret positions: 12 CNC Brand: _Unknown / Other TOS - SBL 500 CNC CNC Lathe Ø 630 x 1000 mm C-Axis MACH - ID 6291 Make: TOS Type: SBL 500 CNC YOP: 2001 Max. turning Ø    630 mm X-Axis     320 mm Z-Axis     500 mm Spindle bore      92 mm Speedrange       3000 Rpm Spindle power      17 kW ATC / revolver       12 Speed live tools       4000 Rpm Chip conveyor        yes Dimensions Length     5.500 mm Width       2.200 mm Height      2.100 mm Weight      6.620 kg

Category: 102 lathes
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 158218558

used

check Seller: Mach4metal
Location: Land-nl

add to watchlist

Center height: 525 mm Center distance: 2000 mm Spindle bore: 102 mm MACH-id    5226 MAKE         TOS Celakovice CZ TYPE            SU 100 H / 2000 YOP               2012 SPECIFICATIONS Swing over bed Ø    1050 mm Swing over cross slide Ø    740 mm Spindle bore        102 mm Bed width      800 mm Stroke pinole         350 mm Spindle taper        80 Mk Power         22 kW Speeds / ranges       450 Rpm Feed rate X-Axis      3600 mm/min. Feed rate Z-Axis      1200 mm/min. Quill Ø       165 mm DIMENSIONS Length         5000 mm Width& ...

Category: 102 lathes
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 158218561

used

check Seller: Mach4metal
Location: Land-nl

add to watchlist

Center height: 0 mm Center distance: 2000 mm Spindle bore: 128 mm MACH-id     4074 MAKE          TOS Celakovice CZ TYPE             SUA 125 NUMERIC YOP                2014 SPECIFICATIONS Max. turning Ø     1250 mm X-Axis         2100 mm Z-Axis          600 mm Spindle bore     128 mm Speedrange       630 Rpm Spindle power      37 kW Control       Fagor 8055 DIMENSIONS Length       5200 mm Width        3185 mm Height       2200 mm Weight       7700 kg New price   EUR 320.000

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
TOS 3rd category level
 
RESALE used machinery 25 years online