used TECUMSEH Cold storage cells

Item Condition: Signs of Use Availability: as of now Disassembly: by buyer Location: Soest Ceiling Air Cooler: GEA - DEA 081D Power ratings: 230 V, 50/60 Hz Internal dimensions approx.: W 2400 x H 2400 x L 3296 Price: 1450 € VB System: in operation Location: near Soest

Item Condition Wear Function active Location Soest Dismantling by buyer Price 1650,00 € VB

2 pieces of loading cells / storage cells 90 sqm3 Smooth wall with 2 funnels Dimensions: 2600 x 5200 x 6706 mm + funnel and substructure Exit slider 250 mm * 250 mm Available Mob. +491715213204

4 piece 5 to RLC, calibrated Loadcells used, have been expanded because of production reconstruction with one ball - foot upper part PDF / ds-vlc-lowcap.de Together: a price 180 euro

2 welding robots MOTOMAN NX100 with rotary table Built: 2006 Max payload: 165 kg Max arm area: - 2651 mm (on the axis from the vertical surface to the machine frame) - 3372 mm (on the axis from the paral alarea to the machine frame)

Welding cell ICS Robotics with 2 robots Panasonic G2 Robot: 2 x Panasonic G2 6-axis Year of construction: 2011 Source: 2 x Panasonic WG-EG1400 Dimensions from the cell: 4500 mm x 3000 mm x 2600 mm Indexer: Panasonic 3000 mm

Cell Berger with grinding robot Kuka KR 180 (external grinding A1) Grinding cell Berger 2012 (external grinding A1) - Total weight approx. 6300 kg - Dimensions of the cell: approx. 4650 x 2400 x 3100 mm 6-axis robot Kuka KR 180 R2500 Extra - Year of construction 2011 - Control KRC 4 - additional axis (7th axis) Belt grinding station BSS10 belt dimensions 3500 x 30 mm - contact disc diameter 200 mm - Motor power 4 kW 2 x polishing stations, - Polishing disc diameter 350 - 600 mm - Power 5.5 kW Gripper change cabinet Belt conveyorsInteroll Automation GmbH - Total length approx. 2000 mm - Bandwidth approx. 440 mm

Cell Berger with SChleif robot Kuka KR 180 (internal grinding I1) Grinding cell Berger 2012 (internal grinding I1) - Total weight approx. 6200 kg - Dimensions of the cell: approx. 4650 x 2400 x 2900 mm 6-axis robot Kuka KR 180 R2500 Extra - Year of construction 2011 - Control KRC 4 - additional axis (7th axis) 2 x Polishing stations, Polishing disc diameter 350 - 600 mm Polishing disc width 100 mm - Power 5.5 kW

Parker Engineering & Design Vertical Light Stack Module For testing solar modules photovoltaic modules Testing of electrical and mechanical safety Support in product development, design and quality control Detection of any problems that may arise during development Quality and safety control Endurance test bench Temperature Can be driven on castors Entrance trays for forklifts 400 VAC, 3.PH, 50 AMP Ir. 10,000 amp YOC 2012 Weight 1400 kg

Inv. Num. : 6169 Type: Motoman DX 100 Producer: YASKAWA Created: 2011 Parameters: Operating hours: 12800 h Switch-on hours: 6000 h Number of axis: 6 horizontal reach: 1717 mm Min. vertical reach: 3063 mm Maximum load: 20 kg

KUKA KR16 L6 ARC-C robotic welding machine together with the PO-2t6m-01 rotary positioner was commissioned in 2017 and its purpose was to very precisely weld gates and fence spans, but it can also weld various types of structures that fit within the range of the rotary positioner. The welding station includes a robotic arm built in 2009, which was previously only used for testing. The whole thing has only worked for 50 hours. The KUKA KR 16 L6 ARC-C robotic welding system is equipped with: – welding robot: KUKA KR16 L6 ARC-C – controller: KUKA KR C2 – rotary manipulator: PO-2t6m-01 – current power source: FRONIUS TransPuls Synergic 4000 CMT R – software: KUKA System Software (KKS) – torch cleaning device: TBi BRG-2-ES-DAE – wire feeder: FRONIUS ROBACTA DRIVE CMT – track The rail-moving KUKA KR16 ARC industrial robot with a reach of 6 m allows excellent preci ...

FANUC Arc Mate 100iC robotic welding machine manufactured in 2014, is designed for welding workpieces with even the most complex shapes. The FANUC robotic welding system is equipped with: – robotic arm: FANUC Arc Mate 100iC (2 units) – 3-axis manipulator: PEHh-3-450 – controller: FANUC SYSTEM R-30iB – welding source: LINCOLN ELECTRIC Power Wave S350 (2 units) – light curtains – liquid-cooled welding torch: ABICOR BINZEL ABIROB W500 (2 pcs.) – torch cleaning device: ABICOR BINZEL BRS-CC – wire feeder: LINCOLN ELECTRIC 4R100 (2 pcs.) – wire reel cassette with clamping system (2 pcs.) – operator’s panel – water cooler: LINCOLN ELECTRIC COOLARC-50 (2 pcs.) – control cabinet – attaching fixtures (2 pcs.) – strain relief hanger and cable relief (2 pcs.) – covers with service door and lock with safety switch – platform (2 pcs.) In order to ...

Inv. Num. : 7188 Type: MA 1900 Producer: Motoman Created: 2011 Parameters: Maximum load capacity: 3 kg Robot travel: 1200 mm Welding process: MIG/MAG Equipment: Two WG-1500 positioners Lorch Welding Accessories JetStream Burner Cleaner SICK Safety Scanner Automatic internal screen Optical Safety Barrier Telescopic entrance door Mobile top hood

WE OFFER AN NICE CONDITION TWIN ROBOTI WELDING CELL YEAR 2012, MACHINE WAS USED IN PRODUCTION FROM 2012 TO 2019 MACHINE WE CAN PUT FOR CUSTOMER ON GROUND, START UP AND MADE AN OPERATORS TRAINING POSITIONER IS HORIZONTAL TURNING: SEE VIDEO LENGHT OF POSITIONER: 4 METERS MAX LOAD PER SIDE PALET 750KG ROBOTS 2X OTC MODEL: NV61-NEFN ROBOTS CONTROL: AX-21 CV0000 WELDING MACHINES 2X FRONIUS CMT TOOLINGS PALET CAN BE CHANGING WE CAN OFFER ALSO TOLINGS FOR THE CUSTOMER PRODUCT :

Inv. Num. : 7264 Type: MA2010 Producer: Yaskawa Created: 2019 Parameters: Maximum arm reach: 2010 mm Maximum load capacity: 10 kg Control voltage: 3 x 400V AC 50 Hz Network Type: TNC-S Components: Controller DX200 Master Welding source Lorch S8 RoboMig XT Burner cleaner BRG2000D 2x Positioner DK-2500-R1000 Servo Rails FB500

Inv. Num. : 7236 Type: AX 21 Producer: OTC Daihen Created: 2011 Parameters: Maximum load capacity: 6 kg Total power requirement: 2600 W Machine weight: 160 kg

Inv. Num. : 7291 Type: Romat 410 Producer: Cloos Created: 2007 Parameters: Control system: Rotrol II Welding machine: MC3R 553 Workstation with one track: 10 m

Inv. Num. : 6855 Type: MA 1900 Producer: Motoman Created: 2012 Parameters: Operating hours: 2200 h The workstation consists of the following parts: Motoman MA 1900 Robot (DX 100 Controller) Source: Lorch Saprom Speed Pulse S8 Tbi Welding Torch GUDEL track - type TMF-1/4000 - with a carriage for a barrel with welding wire 2x fixed table with dimensions 2000x1500 mm and a load capacity of 650 kg Horizontal positioner WESTAX WXH-150 (load capacity 1500 kg) 3x internal automatic workstation doors 3x external telescopic doors 3x SICK safety scanners Automatic cooker hood 2x manually hinged hood Superior control system WESTAX RCU 50 TBI JetStream Automatic Welding Torch Cleaner Positioning frame in HOBES for the storage of fixtures Fencing of the robot workstation

Used cold room with storage freezer LILLNORD, type: Combirum C225-600 -In bakery condition- Refrigerator K 225-165 -10°C / +43°C - For 4 to 6 rack trolleys Storage freezer / fermentation interrupter TF 225-435 - 0° / -20°C - for 18 rack trolleys Assembly on request Condition: Very good, ready for immediate use Inspection and test run are possible by arrangement.

Fiorini storage tank 1000 liters VKB 2.0 - 1000L 4" Storage tank 1000 litres, type VKB 2.0 - 1000L 4" • Cold water tank It is made of painted carbon steel sheet and insulated by closed-cell elastomer foam. This thermal insulation offers optimal resistance to condensation. • Charge valve As a result, the hydraulic circuit can be filled both during peak demand and during normal operation. •Safety valve The valve is set to 6 bar. By means of a channelled drain, it protects the module from overpressure. • Automatic air separator It is located on the upper part of the module and vents the air present in the module. • Drainage valve This drains the water from the deepest point of the reservoir to allow it to be emptied. •Case The base is made of thick lacquered sheet steel. The external panels are made of galvanized and painted sheet steel and are highly weather-resist ...

Overview Cold storage cell with floor insulation Technical data  Temperature range: -1°C to -20 °C  Dimensions (width x depth x height): 7,40m x 15,80m x 3,23m Insulation panel: 100mm | 0,23Wm/ K  Non-slip, waterproof, food safe floor Incl. LED lighting + mounting bracket

Cold room lock, cold room lock, mortise worm lock, cold room door lock -Manufacturer: STUV, cold storage lock unused in original packaging -Type: 3.16.416.2 Links -Quantity: 10x door lock available -Price per piece -Dimensions of box: 260/150/H40 mm -Weight: 1.1 kg/pc.

Cold room lock, cold room lock, mortise worm lock, cold room door lock -Manufacturer: STUV, cold storage lock unused in original packaging -Type: 3.16.415.2 Links -Quantity: 6x door lock available -Price per piece -Dimensions of box: 260/150/H40 mm -Weight: 1.3 kg/pc.

Cold room lock, cold room lock, mortise worm lock, cold room door lock -Manufacturer: STUV, cold storage lock unused in original packaging -Type: 3.16.416.1 KRT lock V2A -Quantity: 6x door lock available -Price per piece -Dimensions of box: 260/150/H40 mm -Weight: 1.1 kg/pc.

Wir bieten ein gebrauchtes Kühlhaus und Gärschrank an. Abholung aus Deutschland. Price 3000 Euro aus Deutschland.