used TEAMTECHNIK Gear Testing Machines

One side centering tips, opposite side SK50 adapter in different mounting diameters

Attention: Before purchasing a used universal tester / tractor, consider the old, used machine (all?) need new electronics for WIN 10. No manufacturer / Microsoft provides support for WIN XP / 7 – an expensive impasse! Purchase, pickup, software update (if possible?), commissioning, modernization are more expensive than a new galDABINI machine Quasar 600 kN incl. load cell 600 kN, Latest technology (BECKHOFF Elektronik) with first-class software LabTest. Suitable for tensile tests, pressure tests, bending tests and cyclic tests * stable, using finite elements FEM, 2-line universal test era * Optional load cells N: 10 | 20 | 50 | 100 | 250 | 500 or kN 1 | 2.5 | 5 | 10 | 25 | 50 | 100 | 200 | 250 * for tests on steel, reinforced steel, plastic, rubber, foils, textiles, wire, sheet metal, components, assemblies and many more. * Very well Made in Italy | Europe, German + Europe ...

We sell here a Zwick Roell tensile and compression testing machine Zwick Roell Z2.5 BTC-FR2.5TN D09 with Testcontrol I and TestXpert software. The machine is in a tagless condition and fully functional! PC and monitor included! More photos will follow! Test force: 2.5kN Test chamber width: no limitation Height of lower test chamber: 365 ... 1040mm Scope The ZwickRoell zwickiLine material testing machine Z2.5 TN+ is a high-performance, flexible inspection solution for a variety of demanding test tasks. The Material testing machine is ideal for high-precision testing requirements as well as for the Research and development. For testing tasks under cleanroom conditions, the zwickiLine Z2.5 TN+ is also ideally suited. They in production and testing areas, the cleanroom Class 5. Due to the special technical properties, the zwickiLine Z2.5 TN+ for testing metals, Spring ...

We sell here a Zwick Roell tensile and compression testing machine Zwick Roell Z020 TE BT2-FR020TE-A50 with Testcontrol II and TestXpert software. The machine is in a tagless condition and fully functional! More photos will follow! Test force: 20kN Test chamber width: 440mm Height of lower test chamber: 1785mm Modern load frame design • The drive is provided by maintenance-free, digital controlled AC drive technology. In combination with the innovative engine feedback system mdfhl37nql even at the lowest speeds, the best synchronization properties. • The testing machines are equipped with a patented rigid hollow chamber profile with guide cylinder equipped. The large guide length and surface ensure high-precision truss guidance. This combination eliminates undesirable mechanical influences on the sample are minimized. • The T-slots integrated in the profile g ...

Technical data Max. diam. of external gear: 600 mm Module max.: 20 mm Module min.: 0.5 mm Table load max.: 250 kg Distance between centres (min.): 25 mm Distance between centres (max.): 500 mm Error increase: 1:: 250 1:: 500 1:: 1000 Machine´s weight about: 1500 kg Overall dimensions machine: Length: 1000 mm Width: 1000 mm Height: 2200 mm

Gear testing machine with chart recorder and electric drive manufacturer: unknown machine is designed for the inspection of gears accessories various module pins and mandrels has various hand cranks and adjustable settings and also an electric drive, with chart recorder you can see various rashes. in the camp under current vorfuehrbar, unfortunately no manual available. Are sold without any warranty

GEAR NOISE TESTER Make : HURTH Model : ZP320 B THE MACHINE IS IN EXCELLENT CONDITIONS AND COMPLETE IN ALL ITS PARTS

KLINGELNBERG PFS 600 Gear Testing Machine Gear Diameter 15-600 mm Gear Width 160 mm Module Range 0.5-15 Stroke of Feeler 165 mm Height between centers 50-650 mm Max. Length of Workpiece 665 mm Helix angle 0-90 Max. Weight of Workpiece 300 kg

MAHR GMX 275 CNC GEAR TESTING MACHINE

Klingelnberg PFS600 Gear tester

max. wheel diameter: 400 mm gear width: 0 mm module: pinion diameter - max.: 254 mm axial cross angle: 90 ° total power requirement: 15 kW weight of the machine ca.: t dimensions of the machine ca.: m This machine is very suitable for precision production testing of spiral and hypoid bevel gears with shaft angle 90°. The gear spindle is vertical and the pinion spindle is horizontal. The pinion cone distance can be adjusted while the machine is working in order to find the optimal mounting position whereby the gear is loaded with a preset torque. The axial pinion position can be adjusted until the quietest meshing position of the traction flank is found. Likewise, the thrust flank can be tested during the return run. Marking compound is sprayed on both sides of the teeth so the flank contact pattern can be seen. Working cycles, as well as the positioning in the tooth gap, are automat ...

max. wheel diameter: 2500 mm gear width: 0 mm max. module: 34 min. module: 1 total power requirement: ca. 15 kW weight of the machine ca.: 15 t dimensions of the machine ca.: 4,20 x 2,00 x 2,90 m Extra große ZR-Prüfmaschine, Gegenhalter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 400 mm gear width: NA mm max. module: 5 min. module: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Manual Two Flank Gear Tester The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 120 mm gear width: 160 mm max. module: 3 min. module: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Two Flank Gear Tester The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: NA mm gear width: NA mm max. module: min. module: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Manually operated 2-Flank Gear Tester The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 160 - 1.600 mm gear width: 250 mm max. module: 20 min. module: 1,5 total power requirement: 1 kW weight of the machine ca.: 3 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 400 mm gear width: 500 mm max. module: 15 min. module: 0,5 total power requirement: 2,5 kW weight of the machine ca.: 2 t dimensions of the machine ca.: m H O E F L E R (Germany) CNC Controlled 4 Axis Inspection Centre for Gears Model EMZ 400 Year 1988 Serial No. 067 047 ____________________________________________________ Working range: Min./max. gear Ø / base circle Ø 0 – 400 / 390 mm Module range 0.5 – 15 Gear width, max. 500 mm Travel of measuring head, approx. +/- 180 mm Helix angle 0 – 60 ° Max. weight of workpiece, approx. 250 kg Distance between centres, approx. 1,000 mm Distance between centre and body of counter steady 205 mm Table Ø, approx. 290 mm Plotter diagram scales 50 / 1 ...

max. wheel diameter: 600 mm gear width: 150 mm max. module: 15 min. module: 1 clamping length min.: 45 mm clamping length max.: 750 mm workpiece weight: 150 kg total power requirement: kW weight of the machine ca.: 0,55 t dimensions of the machine ca.: 1,2x0,8x1,95 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter:5 - 260 mm gear width:400 mm max. module:15 min. module:0,5 gear hobbing diameter - internal:30 mm max. helix angle:> 85 ° Aussenverz. max. helix angle:> 45° Innenverz. Testing Range vertical:400 mm dist. between centers:5 - 600 mm table diameter:260 mm max. table load:100 kg speeds:30 1/min total power requirement:1,6 kVA weight of the machine ca.:900 kg dimensions of the machine ca.:200 x 1300 x 2150 mm CNC Gear Tester in good condition, out of OEM Test Lab. For measuring of spur and helical toothing, additional of rotationally symetric parts as true running, coaxiality, axial runout, etc. with tool changer ( 4 nos.)

Tensile testing machine make ZWICK type 1281Fabr. -No: 26507 built in 1964Max. Press force: 2000/4000/6000 kpTest speed: 0m- 600 mm / minStroke of the working piston: 300 mmClamping distance: 0 - 400 mmClamping wedge surface: 60 x 20 mmPillar distance / clear width: 255/215 mmMax. Printing plate distance: 300 mmDiameter of the pressure plate: 136 mmMax. Bend length: 550 mmWidth of bending supports: 64 mmused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pneumatic bore gauge Fabr. NIEBERING Neusswith pneumatic columnPneumatic column display type MOCbuilt on base cabinet with 4 drawersWith:- Various accessories (measuring pins and setting rings) in the cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Roundness tester make MITUTOYO type Roundtest RA 122Code no. 211-941D, serial no. 920069 built in 1992consisting of:MEASURING UNIT RA 1001 control and evaluation unit RE 12 buttons No. 211-046Technical specifications:Turntable: air-bearingMeasuring range / workpiece diameter: 280 mmMeasuring range / workpiece height outside: 220 mmMeasuring range / workpiece height inside: 110 mmRoundness of the turntable: 0.08 + 6 H / 10000 µmSpeed: 6 rpm.Table diameter: 110 mmCentering range: +/- 2 °Leveling range: +/- 1 °Weight: 32 kgDimensions L x W x H: 252 x 404 x 545 mmBUTTONMeasuring range: +/- 0.25 mmStylus radius: 1 mmMeasuring force: 70-100 mNCONTROL AND EVALUATION UNITFilter: 15, 50, 150, 500 oscillations / revMeasuring range max .: +/- 250 µmMagnification: 100 x - 20000 xautomatic compensation: eccentricity, coaxialityParameters: roundness, center offset: Top height, valley depths, evenn ...

Surface Roughness Tester Fabr. MITUTOYO Type Surftest 402Series 178consisting of:Measuring stand -No: 178-001Height adjustment: 320 mmAngle adjustment range: +/- 45 °Table size: 600 x 250 mmDimensions: 600 x 350 x 742 mmWeight: 75 kgCross table -No: 178-013with coordinate adjustmentTilting range: +/- 2 °Swivel range: +/- 3 °Dimensionsq: 160 x 90 mmSurftest Analyzer -No: 178-821Surftest 401used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Digital height measuring and marking device with double column and handwheel adjustment Resolution 0.01 mm / 0.0005 inch 0 - 600mm Carbide tear tip The device comes from my private property, was used for private purposes. It is in a very good little-used condition. Original price today 605,00Euro net