used TBA Profiling Systems

1 Qty. 1 Second-hand profiling machine – P16 Mfc.: TBA Built: 1973 Overhauled 1990 Type: P16 Material to be profiled: S185 to S355 Quality of the material: Black, pickling, galvanised Strip thickness: 1 to 3.5 mm Strip width: 500 mm Max. profile height: 81 mm Profile length: 3.5 to 8 m 2 Qty. 1 Second-hand profiling machine P-17 Mfc.: TBA Built: 1985 overhauled 1990 Type: P-17 Material to be profiled: S185 to S355 Quality of the material: Pickling, galvanised Strip thickness: 0.6 to 1.5 mm Max. strip width: 230 mm Max. profile height: 41 mm Profile length: 3 to 6 m 3 Qty. 1 Second-hand profiling machine P-20 Mfc.: TBA Built: 1989 Type: P-20 Material to be profiled: S185 to S355 Quality of the material: Pickling, galvanised Strip thickness: 0.6 to 1.0 mm Strip width: 350 mm Max. profile height: 80 mm Profile length: 3 to 6 m 4 Qty. 1 Second- ...

MAX. TEMP.: 1000 °C, CAPACITY: 60 TON, NO. OF BURNERS: 20,

3 Qty.1 Second-hand Tube Expander Unit Built: 2012 Model: ABO Tube diameter: 500 mm-2540 mm

Qty. 1 Second-hand hot circular saw Mfc.: TBA Built – Bj.: 1950 overhauled 1972 Saw blade dia. – Sägeblattdurchm.: 1,600 mm Saw blade feeding with hydraulic drive Sägeblattvorschub mit hydr. Antrieb Hydraulic station Hydraulikstation Dimensions of piece for cut: min./max. 70 / 185 mm square Abmessungen des zu schneidenden Materials: min./max. 70 / 185 mm

Qty. 1 Second-hand bonder line Bondern is a process for the surface treatment of metal surfaces and for producing a conversion layer by phosphating. It serves to protect against corrosion. In further processing steps such as deep drawing, the phosphating created serves as a sliding layer. Mfc.: TBA Built: TBA Strip width: 250 – 600 mm Thickness: 2.0 – 4.0 mm De-coiler ID 500 mm OD 600 – 1900 mm Coiler ID 500 mm OD 600 – 1580 mm Plating Double sided: 1.0 – 4.0 g/m² Single sided: 2.0 – 5 g/m² Note: 3 g/m² = approx. 2 µm layer thickness

Qty. 300 Second-hand profile baskets (approx. 300 pieces) Size: 5750 x 900 x 500 mm - L x W x H Steel construction and galvanised!

Cans De-palletiser cans De-palletiser for cans Overhauled: 2019 Small canning line up to max 10.000 cans/h With this speed an handle big pallets

The profile perforating machine INTESO S3130T was manufactured in 2011 in the Czech Republic. Technical parameters: - Maximum internal diameter of the sheet metal coil: 80 mm - Maximum length of the finished product: 3000 mm Technical data : - screen control panel: SIEMENS - maximum length of profiles: 3000 mm - maximum cross-section of perforated profiles: 120 x 80 mm; fi 80 mm - automatic linear feed - optical sensor for automatic control of the correct length of the part - linear positioning of the hydraulic cylinder stroke - non-deformation perforation technology - the possibility of perforating profiles of various shapes - memory of perforation programs - two-sided perforation (in one operation) and one-sided perforation - automatic lubrication - maximum pressure of the hydraulic press in the line: 147 kN (15 tons) Tool accessories for the INTESO S3130 T punchin ...

Qty. 1 Second-hand H-Beam production line Mfc.: Production Line: B&K Welding Machines: THERMATOOL Saw Cutting: LINCOLN Driving Part: Seoho Electric Drive: PAKER PLC: MITSUBISHI Leveller: FLATTENER Press cutter & DDS: Samyang Run-out Table: Wuchang Production range: No. Class Width (mm) Thickness (mm) Length(M) 1 Web 53 ~ 450 2.3 ~ 12.0 6.0 ~ 18.0 2 Flange 50 ~ 300 3.0 ~ 12.0 Capacity: 60,000 MT/annum Equipment total weight: approx.139 MT First installation: 10/1973 Type: Welding H-Beam Facility Welding Type: Electric Resistance Welding Cutting type: Cut-Off Saw, Presscutter Line Speed: Max. 37 m/min.

Board repair line with double end profiling line in top condition !! Workpiece parameters of the plates: Min.: 900 mm x 200 mm Weight min. : 17 mm Max .: 5000 mm x 1250 mm Max. Weight: 60 mm Weight: max. 150 kg < Accuracy: +/- 0.2 mm The portals have a max. Clock power of: max. 6 cycles / min The max. Partial performance: 18 parts / min (DEP line) Year of construction 2008 Condition: good (Original price of the line 2008 Euro 4.9 million) Consisting of: * Feeding station with feeding rollers, * Automatic vacuum lifting table for lengths up to 6 m * Conveyor systems * Repair line 1 * Turning station * Transfer service * Repair line 2 * automatic vacuum lifter for stacking (6m) * Stacking roller conveyor * Control cabinet with machine control * Profilfraessanlage * Stacking Tables; very well

Folding machine RAS 22.11 - see pictures, Stand fold / double-standing fold

Roll forming system with 2 stations + prepare station for U-profile

CNC profiling and cut-to-length line make RAS type 29.17 line 2005serial no. 10/1, year of construction 2001consisting of:a)Sheet metal/strip straightening machine RAS type 26.45, built in 2001Sheet thickness (galvanized sheet steel up to 400N/mm2): 0.5 - 1.25 mmBelt width: 500 - 1500 mmStraightening speed: 0.9 - 15 m/min.Number of straightening rollers: 6 piecesNumber of take-off rollers: 4.8 kWWeight approx.: 2.1 twith movable control panelb)Roll feeder RASBelt width :500 - 1500 mmMax. feed length: 9999.99 mmFeed accuracy per 1000 mm: 0.2 mmDrive power: 1.8 kWWeight approx.: 1250 kgwith curved infeed roller conveyorc)Cut-to-length guillotine shears RAS type 82.16, built in 2001Max. cutting length: 1640 mmMax. sheet thickness: 2.0 mmCutting angle: 1.36°Strokes per minute: 63Stand projection: 100 mmsmallest remaining strip: 35 mmTable height: 750 mmDrive power: 3.0 kWWeight approx.: 950 ...

Z-profiling machine make probably SCHECHTL / HEIDT type SZP 250Technical specifications:Working width: 2500 mmSheet thickness St.:0.5 - 1.5 mmSheet thickness VA:0.4 - 1.0 mmSheet thickness aluminium: 0.4 - 1.0 mmRoller distance: 160 mmNumber of profile rollers:15Profiling height: 3 - 7 mmThroughput speed: 20 m/min.Drive power: 2.0 kWWorking height: 890 mmApprox. weight: 880 kgExternal dimensions approx.: 3200 x 1040 x 1290 mmwith- Forward and reverse switch- support table- foot switchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

The Diper Design DEVANADORA D5-EH-V35 sheet profiling machine was built in 2004 by the Spanish company Diper Design. The machine is designed for profiling metal sheets with a maximum width of 1250 mm. The mandrel diameters (closed / open) are 450 and 550 mm, respectively, and the roller diameter is 1500 mm. The profiling machine works with a bending speed of 35 m / min. Roof flashings were produced on the machine. By using an appropriate matrix on the machine, it is possible to produce e.g. gutters, metal shelves, window sills, profiles, etc. The total weight of the machine is 5 tons. The machine is fully operational and ready for further work. Technical data of the Diper Design DEVANADORA D5-EH-V35 profiling machine - bending speed: 35 m / min - maximum sheet width: 1250 mm - roll diameter: 1500 mm - spindle diameter (closed): 450 mm - spindle diameter (open): 550 mm – maximu ...

Lock forming machine LFM Lock former machine LFM is the one that is most required beyond our customers. It is used for forming ventilation locks such as Pittsburgh lock, standing seam lock, single hem, double hem, locking pin, elbow radius element. Those locks are widely used when construction process of different industrial and civil buildings. The advantage of our lock former machine compared to others machine is possibility to form pipe lock so you can use it while round pipes production. So our customers can save money on purchasing additional equipment and renting additional production areas. There are 7 pairs of forming rolls on the LFM machine to form different ventilation locks. Forming rolls are tempered so they have long life period. The process of ventilation element production is started from Pittsburgh lock forming process and single hem forming process  ...

Window drip cap roll forming machine PO-1 Window drip cap roll forming machine PO-1 allows to produce “window trim” profile by rolling the sheet metal through forming rolls. A window trim is an element that is widely used in construction while windows installation. In the standard way the window trim is bent step by step using a manual folding machine. This is a cheaper, but more time-consuming process. The metal sheet must be pre-marked for each bending operation. Each bend is then performed using a manual bending machine. The operator must set the necessary dimensions according to the marks, fix the sheet metal with the machine's fixation mechanism, and then bend it. The length of the window trim is limited to the maximum working length of the bending machine. Thus, each manual folding operation is time-consuming and the production process becomes expensive and inefficient. To ...

12-Stand ASC Trim Roll Former Make: ASC Year: 2018 Machine Title: Trim Roll Former Serial # JN 26772 OOE Condition; Like New Voltage: 240 VAC 60HZ Number of Stands: 12 Shaft Diameter: 2″ Electrics, Controls, Drawings and Manuals

Universal folder former FASTI type 81501Fabr. -No: 778151016 year of construction 1977Sheet thickness depending on profile: 0.5 - 1.5 mmNumber of stations: 7Cutting width center profile max. : 100 mmMotor power: 2.4 / 3 kWWeight: 430 kgWith:- different sets of rolls for Pittsburgh fold, single standing fold- bumper tapeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Roll Forming Line 9-Stand Stud & Track

Stud roll former 11 stand Year: 2009 Gauge: 12g – 26g Products: 1-5/8″ & 2-1/2″ Flench Stud Maximum Strip Width: 22″ Shaft Diameter: 2″ Direction: Right to Left Roll Former Number of Stands: 11 Shaft Diameter: 2″ Individual Gear Boxes Sliding Outboards Powered Base Adjustment Motor: 100HP DC Hydraulic Post-Punching Press Hydraulic Drive & Traverse Flying Die Design Hydraulic Cut-Off Press Hydraulic Drive Hydraulic Traverse Flying Die Design Complete Roll Forming Line, Toolings & Die Sets, Electrics, Hydraulics, Controls

Guzzetti tube mill 76-200mm with a lot of tools and automatic stacker (A3773) Guzzetti tube mill 76-200mm with a lot of tools and automatic stacker can be perfect solution for your tube production business. This line will allow you to produce huge range of round and rectangular pipes in very easy and automatic way. Line is equipped with important machines to make manufacturing process maximum convenient and productive. You can purchase machine as is where is or we can offer to make repair. Also we can provide shipping and installation service. If you start business with us you will never regret! Make: Guzzetti (Italy) Year: 2008 Automatic stacker: MAIR / Italy Tube range: D76- D200 Material’s thickness is 2-6mm (incl and SS) PLC – Siemens and all inverters and servo drives Welding aggregate is Thermomachine / Italy This line is also equipped and with the following m ...

Folding former, folding machine, form folding machine, profiling machine, profiling system, slat production, blind production -Profiling system: replacement stations for ID26309 -Profiling machine: solid version, used for slats/blinds production -Bottom profiling stations: 5 pieces -Drive shaft: Ø 35mm -Dimensions: 4x 700/390/H400 mm 2x 300/200/H160 mm -Weight: 702kg

Channel folding machine, folding machine, folding former, seam locking machine, folding former, sheet metal bending machine, profiling machine -Number: 14 pieces rolls -various: versions -Recording: Ø 28 mm -Price: complete -Weight: 22.5 kg

Channel folding machine, folding machine, folding former, seam closing machine, folding former, sheet metal bending machine, profiling machine -Rolls: 20 -Distance rings: 14 -Executions: different -Take: Ø 28 mm -Price: complete -Weight: 21.4 kg