We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Saw units: 2 Cutting length max mm: 2200 Cutting height mm: 70 Saw blades tiltable: Yes Diameter saw blade mm: 250 Cutting length min mm: 240 Main motor kW: 1.1 Pneumatic tensioner: Yes Saw feed: pneumatic
used
* 45°.
used
Glass bead saw Fabr. STRIFFLER type 2730Fabr. -No: 136, built in 1978for sawing strips (glazing beads) to 45 °Technical specifications:2 x saw blades: Drm. 200 mm carbide tipped2 x pneumatic workpiece clamping approx. 40 mmSaw stroke: 400 mmHeight adjustment: 40 mm2 motors: 0.75 kW, 380 V, 2830 rpm.Operating pressure: 6 - 8 barWith:- Underframe- Manual saw feed- Safety device against unintentional pulling of the sawxa0xa0 gensets forwardused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Striffler 7502/3 Manual router 230V
used
Double mitre saw STRIFFLER-STRIMA 2750 Year of construction: 1992 S/N 289 Manufacturer: Striffler GmbH Germany Cutting width 2,200 mm Cutting height at 45° 240 mm 2 saw motors 1.1 kW, 2800RPM / 380 V 50 Hz Saw blade 250mm Rear-cutting design Width adjustment by electromotive Saw feed pneumatic Length adjustment by handwheel Pneumatic clamping device Length 2940 mm Width 1,100 mm Height 1,220 mm Weight approx. 360 kg
used
Number of motors: 2 Stück 0: 2800 mm Control: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Number of motors: 3 Stück 0: 2200 mm Control: ja 0 0: Ja 0 Dimensions (L/W/H): 3400x800x1600 mm STRIFFLER double glass bead miter saw 2750 E --------------------------------- with electronic positioning device Cutting length in special version: 2200 mm Min. cutting length: 254 mm Saw feed is pneumatic, infinitely adjustable with oil brake cylinder Length adjustment by recirculating ball - threaded spindle - servo Motor drive and electric. Positioning device Cutting angles 90° and 45° against adjustable fixed stops, Intermediate positions adjustable according to scale. Clamping device from the front up to a maximum workpiece thickness of 65 mm Clamping device from the front and from above up to a maximum workpiece thickness of 65 mm up to a maximum workpiece height of 50 mm Connection for suction diameter 50 mm Electrical connection: 3 m cable for 380 volt, 6.0 amp plug. Electrical cir ...
used
Onsrud twin table copy shaper ONSRUD-auto dual table rotary shaper, model RS-28, for continuous production, 2-speed cutter (5,000/10,000 rpm.) pivots alternately to the right or left table, as center clamp engages, the table rotates, the cutter pivots into your part and continues around template machining the part, the operator unloads and loads new part on alternate table, when cut is complete, operator presses the foot pedal, the cutter then pivots to alternate table &cuts, cycle continues.. $9,900 Contact Fred (716) 433 4224 (12:00 noon is best time to call)
used
With feed and vacuum pump
used
--------------------
used
I sell a router for Koperfräsen Sicar, built in 1998. Milling head with motor Swivel + - 45° Spindle holder fi.10mm Electric motor: 1.9kW / 2800 rpm -> 18,000 rpm at the spindle 1.5 KW / 1400 rpm -> 9,000 rpm on the spindle Pneumatic connection the milling cycle, pedal operated. Made in Italy.
used
Router with table widening Speed: 10,000 – 20,000 rpm. Table dimensions: 900 mm x 765 mm4. Engine 3 kW5. 380 V Dimensions: 900 mm x 1400 mm x 1600 mm Weight approx. 575 kg
used
SPECIFICATIONS: Mechanical working height adjustment Installed capacity: KW 5.5 Complete with accessories (spindles/counter spindles)
used
Used milling machine on behalf of a customer Manufacturer: Bokö Bohner & Köhle Type WF 2 Hydro Mill At the moment, the machine can still be viewed under electricity. ATTENTION Location: Bielefeld Sale from foundation.! Dismantling must be carried out by the customer. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out on your behalf. This offer is only aimed at traders, ...
used
Router model OF 950 year 90
used
Used milling machine Manufacturer: Zimmermann Type FZ 1 Built in 1987 With brake Total weight approx. 500 kg Speeds 560/1,000/1,800/2,200/3,600/4,400/7,400/14,000rpm. Clockwise/counterclockwise rotation Table size 630x490mm Support table 490x400mm Longitudinal movement 420mm Transverse movement 420mm Head can be swivelled on both sides With rotary table With abb. Accessories (cutters, clamps) Location: 58730 Fröndenberg/Ruhr The machine can be viewed and tried out under electricity. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. ...
used
Used milling machine Manufacturer: Zimmermann Type FZ0 (Fritzi) Built in 1986 with base cabinet with various milling cutters Total weight approx. 200 kg Location: 58730 Fröndenberg/Ruhr The machine can be viewed and tried out under electricity. We will be happy to send you more photos by e-mail. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarantee is excluded. The goods are sold from the location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we h ...
used
Spindle diameter 30 mm Spindle speeds (4 levels) 1800/3000/6000/9000 RPM Spindle stroke 100 mm Spindle turning - 5° up to + 30 ° Max clamping height 105 mm Work table 710 x 640 mm Table height 900 mm G & HM-FS200S-STI
new
Weibert WJ-F50 Table milling machine NEW Safety rulers in the shaper fence strongly ribbed cast iron table 1100x900mm electrical height adjustment 200 mm 5.5 KW R + L barrel 3000 to 10000 U/1 Control Panel top Milling spindle can be exchanged Tool - diameter When profiling 275mm at the tenoning 400 m stable role statement WJ-600600 K 4 Special price:
used
Type: T-01 Exhibit and demonstration model! - Table length: 1200 mm - Table width: 530 mm - Table height: 900 mm - Length of slide: 1,200 mm - Width of the slide: 315 mm - Height of the slide: 142 mm - Inclination of the milling spindle: 0 to -45° - Useful length of the milling spindle: 125 mm - Spindle speeds: 3500/6000/8000/10000 rpm - Thorn diameter: 30 mm - max tool diameter: 240 mm - max. can-draw tool diameter: 230 mm - Profile milling: 210 - 240 mm - Cone milling: 320 mm - Diameter suction nozzle: 2 x 120 mm electrical connection: - Motor power: 5.0 kW - Voltage: 400 V - Phases: 3 Ph - Current type: AC (AC) - Frequency: 50 Hz Dimensions: - Length: 1200 mm - Width/depth: 1400 mm - Weight: 510 kg Space: - Length: 4,400 mm - Width/depth: 4,420 mm The data refer to the recommended installation area and result from the dimensions of the machine ...
used
Table milling machine SCM T 120 C. SUVA protection Maintenance: Malawer AG Spindle 30 mm 2900/4400/6000/7800/10000 RPM Weight 450 kg Masch No. 20474 L x W x H: 115 x 90 x 86 (150) cm Built in 1961 Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Type : T900 Spindle-30 mm spindle rotation speeds- 2500 / 5000 /8000U /Min/rpm Spindle tilt- 5° to +45° spindle trave-140 mm max. clamping height-125 mm max. tool diameter-230 mm Table dimensions-1020x700 mm table height-900 mm dust collector plug-60/120 mm engine power-3 kW 400V weight net/gross-280 kg packaging dimensions-1150x1155x730mm
used
Kehl machine / milling machine Schneider 3-roll feed SUVA protection L x W x H: 120 x 100 x 170 cm Weight approx. 580 kg Built in 1981 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12
used
Konturfrä�maschine crosscut saw with sliding table Type: FK5 Second-hand machine Sled Spindle diameter 30 mm Speeds: 4 Height adjustment: Handwheel Power: 6kW Circular saw, crosscut saw Machine is fully functional. Machine is in good condition. We love to hear from you.
used
SPINDLE MOULDER type SCM T130 . second hand diam. spindle mm. 40 volt. 380/50