We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
Stanko 16K25 Distance between centers: 2000 mm Swing over bed: 500 mm Swing over cross-slide: 290 mm Diametre of main spindle bore: 52 mm Number of speeds: 12,5 - 1600 rpm Digital screen: Yes Length: 2795 mm Width : 1240 mm Height: 1500 mm Weight: 3095 kg Max weight between centers: 1800 kg
used
Type:nbsp;16B16P Distance between centers: 850 mm Swing over bed: 360 mm Swing over cross-slide: 190 mm Diametre of main spindle bore: 46 mm Power on main spindle: 7,5 HP
used
Center height: 400 mm Center distance: 4000 mm Spindle bore: 110 mm MAKE Stanko Russia TYPE 1 M YEAR 2003 SPECIFICATIONS Swing over bed Ø 830 mm Swing over cross slide 480 mm Distance between centres 4000 mm Work piece weight 4000 kg Spindle bore 110 mm Spindle speeds / ranges 1250 Rpm
used
Manufacturer | Manufacturer: Stanko Type | Type: 16k20 Stock Number | Stock Number: 0980 Year of construction | Year of manufacture: 1978 Turning length | Turning length: 1000 mm Swing diameter over bed | Swing diameter over bed: 440 mm Spindelbohrung Spindle bore: 50 mm RPM | turning speed: 12.5 - 1600 rpm Tension | Voltage: 380 V Engine power | Drive power: 10 kW Dimensions (LxWxH) | Dimensions (LxWxH): 2800 x 1200 x 1800 mm Weight Machine | Weight of machine: 2,5 t
used
Key data: 1000 mm, 8000 mm, 650 mm
solid design, solid hardened bed with double prism guide of the bed carriage Diameter over bed / support 1000 mm / 650 mm Center width 8000 mm Speed range (24) 5 - 500 1/min Spindle bore 128 mm Tailstock Inner Taper MK 6 Drive power 22 kW Weight: approx. 20,000 kg Dimensions LxWxH approx. 11x2x2 m Incl. Coolant system in the foot Mechanically driven upper support Rapid traverse longitudinal/transverse 3-B chuck Bison D 630 mm 1 x following rest 1 x fixed rest diameter approx. 800 mm 2 x fixed rest diam. approx. 500 mm
used
Single column - eccentric press, STANKO, K 1430 A - 100t BJ. 1985 Tech. Condition very good, - pressure: 100 t -Projection: 320 mm -Stroke: 10-130 mm -Mounting height: 400 mm -Table size: 850 x 560 mm x 100 mm -Tappet adjustment: 100 mm -Stroke: 50-53 / per min. -Machine weight: 8800 kg -Dimensions (W x D x H): 1.60 x 1.85 x 2.9 m Camshaft gear ROSS/Herion Herion valve Auxiliary brake DESCH Lutex ZB 200 Two hand release -transverse eccentric shaft and pneumatically actuated clutch / brake Komi nation -suitable for inlays in two-hand operation -secure setting -Single stroke, continuous stroke MOT testing in 04/2016
used
Max mass of drop parts 150 kgs. Price 3400 EUR
used
Cold stamping press Stanko P 0443 Capacity, tons: 2000 Nominal liquid pressure, kg/cm²: 320 Table size, mm: 1000 x 1000 Table stroke, mm: 500 Table speed, mm/s: 0,14 Rapid table speed, mm/s: 3,1 Distance between columns, mm: 1090 Shut height, mm: 800 Hydraulic drive motor, kW: 5,5 Voltage, V: 380 Frequency, Hz: 50 Press dimensions, mm: 2575 x 1500 x 3285 Press weight, kg: 27000 Price 21500 EUR
used
Max wheel diameter 800 mm Module + 10 Max. spindle speed 310 rpm Max. gear width 350 mm Motor power 7.5 kw Dimensions 2550 mm × 1510 mm × 2000 mm Weight 7,2 ton.
used
Spare parts for table drilling rig SVO / Stankoimport / Gertner, Fuhrmeister & CO Such as. complete drilling spindle SK50 (Please note the attached pdf-file with a drawing of the spindle) Ball roller spindles from the three axes Electric motors, feed motor 3x, main spindle motor complete control Siemens or control cabinet Control panel with digital device Glass mass Removable flat disc diameter 360mm Radial movement of the support of the flat disc 100mm Transformer / Transformer Angular drill head Sub-apparatus Spindle diameter 110 mm Tool holder ISO 50 Technical data of the original machine Travel laengs approx. 1,000 mm Cross-travel approx. 1,600 mm Vertical travel 1,000mm Laeng movement of the extendable spindle 710mm Speed range 10-1.250 rpm Main engine 11kw Speeds 10 - 1,250 rpm in 22 gear stages Extensive machine documentation including user manual ...
used
Table diameter: 1400 mm Turning diameter: 1600 mm Turning height: 1000 mm Motor power: 25 HP/kW Positions ATC: 0 Positions APC: 0 SPECIFICATIONS Max. turning diamter Ø 1600 mm Table / chuck size Ø 1400 mm Workpiece height 1000 mm Work piece weight 8000 Kg Horizontal movement support / ram 700 mm Stroke support left ram 850 mm Angle adjustment / ram swivable 35 Gr Singel column or double column Single column Spindle speeds / ranges 5 - 200 Rpm Power 25 Kw DIMENSIONS Length 3500 mm Width 4200 mm Height 4750 mm
used
Radial drilling machine make STANKO type 2 A 554Machine -No: 8579, built in 1990Technical specifications:Drilling capacity i. Full ST 450 mmThread cutting ST 45 M 52Discharge 1600 mmSpindle mount MK 524 speeds 18-2000 rpm.24 feeds 0.045 - 5.0 mm / minColumn diameter 315 mmDrive power 9.0 kWDimensions L x W x H 2850 x 1030 x 3430 mmWeight approx. 4700 kgWith- Cooling deviceusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Surface Grinding Machine Fabr. STANKO Type 3 D 722 WMake -No: 43432, built in 1987Sanding area: 1250 x 320 x 400 mmsm./lg. Distance spindle center - clamping surface Table: 190/630 mmTable clamping surface: 1000 x 320 mmsm./lg. hydr. Longitudinal adjustment of the table: 300/1050 mmClamping surface of the magnetic plate: 900 x 320 mmHeight of the magnetic disk: 120 mmgr. Vertical adjustment of the headstock: 440 mmGr. transverse adjustment of the wheelhead: 400 mmsm./lg. Outer diameter of the grinding wheel: 325/450 mmDrm. Grinding wheel bore: 203 mmGrinding wheel speed: 1500 rpm.Stepless longitudinal movement of the table: 2.0 - 40 m / min.infinitely variable feed of the headstock: 0.5 - 3.0 m / min.Vertical rapid adjustment of the headstock: 406 mm / min.Drive power: 10 kWOutside dimensions approx: 3300 x 2020 x 2290 mmWeight approx: 7100 kgWith- magnetic disk- Separate hydraulics- Con ...
used
Spare parts for Tischbohrwerk VO / Stankoimport / Gertner, Fuhrmeister & CO E.g. complete spindle SK50 Ball screw spindles from the three axes Electric motors, 3 x feed motor, spindle motor complete control Siemens or control cabinet Control Panel with digital device Glass scales Detachable faceplate diameter 360 mm Radial movement of the faceplate-support 100 mm Converter / transformer Angle drilling head Dividing head Spindle diameter ø 110 mm tool holder ISO 50 Technical data of the original machine Travel along approx. 1.000 mm cross travel approx. 1.600 mm of vertical stroke 1,000 mm Longitudinal movement of retractable spindle 710 mm Speed range 10-1,250 RPM Main engine 11kw Speeds 10-1,250 RPM in 22 gear stages Extensive documentation of machine including operating instructions, description, electrical documentation, etc. More photos on request
used
Max. diameter of initial blank: 30 mm Blank length: -Min.: 120 mm -Max.: 300 mm Max. diameter of upset flange: 60 mm Upset slide nominal force: 2500 kN Max. force on clamping slide with dies closed: 2500 kN Stroke: -Movable die: 100 mm -Upset slide (full): 220 mm -Die closing: 140 mm Slide strokes per minute: 45 Machine overall dimensions: -Length: 6050 mm -Width: 4600 mm -Height: 2260 mm Machine weight: 24680 kg
used
Flat slider for drilling rig for mounting in the drilling spindle Tool holder SK50
used
Electronic Components Drilling Rig StankoImport Stanko-Import 2A622/1600 Electronic components from a Stanko Import drilling rig How 3-pulse thyristor amplifier Bosch Siemens Sikostart Bosch PC200 ZE with Bosch Eprom Bosch PC200 E24V Input Bosch PC200 AR/2A Output Bosch PC200 NT5V Gvvrsw Murrelektronik Type NLS 100-220/24 Uprim 110/220 Upc 24V= Mat.Nr. 031447-102401 Mat.Nr. 031447-102303
used
Capacity, ton 800 Movable die stroke, mm 180 Max. upsetting ram stroke, mm 380 Upsetting ram workstore, mm 250 Upsetting ram return stroke with closed dies, mm 130 Distance bentween upsetting ram and dies stroke forward, mm 140 Number of ram strokes per minute 35 Die dimensions, mm 590 x 220 x 660 Electric motor power, kW 40 Dimensions: mm 6300 x 3900 x 2850 Weight: kg app. 80800
used
Max. diameter of initial blank: 30 mm Blank length: -Min.: 120 mm -Max.: 300 mm Max. diameter of upset flange: 60 mm Upset slide nominal force: 2500 kN Max. force on clamping slide with dies closed: 2500 kN Stroke: -Movable die: 100 mm -Upset slide (full): 220 mm -Die closing: 140 mm Slide strokes per minute: 45 Machine overall dimensions: -Length: 6050 mm -Width: 4600 mm -Height: 2260 mm Machine weight: 24680 kg
used
- The largest diameter of the workpiece, mm 90 - The maximum diameter of the planted flange, mm 120 - Rated force of the landing slide, kN 6300 - The force perceived by the clamping slide with closed dies, kN 6300 - stroke of the landing slider, mm 350 - The stroke of the landing slide after closing the dies, mm 230 - The frequency of continuous idle slider per minute, not less than 42 - Power of the electric motor 45 - Dimensions, mm length 4835 width 3450 height 2880
used
CNC universal tool milling machine make STANKO type SMK 25/32Year of construction 1992Travel X: 510 mmTravel Y: 410 mmTravel distance Z: 400 mmSpindle mount DIN 6987 ISA 40Table surface: 800 x 400 mmPiece weight: 400 kgstepless speeds: 20 - 2000 rpm.Quill stroke: 80 mmFeed range: 1 - 3000 mm / minRapid traverse: 5 m / minDrive power: 11 kWOutside dimensions: 2600 x 2150 x 2130 mmWeight approx: 2000 kgWith- Point distance control HEIDENHAIN TNC 135- Chip collecting panused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Pneumatic air forging hammer Stanko MA4132 Weight of the falling parts: 196 kg Number of strokes per min: 210 Effective kinetic energy of falling part by stroke: 330 kg/m Distance from ram axis-to-frame: 340 mm Anvil height above the floor: 750 mm Stroke run: 460 mm Striking area: 75x190 mm Motor: 15kW Overall dimensions mm: -Length: 930 mm -Width: 1860 mm -Height: 2160 mm Weight of the hammer: 3450 kg Weight of anwill 1650 kg Price 3800 EUR
used
Univ.-Milling Machine Fabr. STANKO Type 675 MFabr. -No: 1727 built in 1972Table longitudinal path X: 320 mmUpper arm lateral travel Y: 200 mmTable perpendicular path Z: 300 mmSpindle mount: MK 416 spindle speeds: 50 - 1600 rpm.16 feeds X, Y and Z: 12.5 - 400 mm / minRapid traverse X, Y and Z: 935 mm / minvertical clamping surface: 500 x 200 mmAngle table clamping surface: 630 x 200 mmDrive power: 1.5 kWDimensions L x W x H approx: 1000 x 1200 x 1700 mmWeight approx: 770 kgWith- rapid traverse- Cooling device- different tool holdersATTENTION: Without vertical milling head !!used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
STANKOIMPORT 5822M thread grinding machine was manufactured in the USSR. The machine is used for the process of grinding threads to give them the correct dimensions and roughness. During this process, a grinding wheel with a diameter of 400 mm is used to remove a small allowance from the workpiece, forming the thread shape on it. The grinding machine processes threads with a maximum diameter of 200 mm, a length of 500 mm and a weight of up to 30 kg. Depending on the choiceed disc, the diameter of the workpiece can be from 3 to 150 mm (grinding with a single-coil disc) or from 10 to 120 mm (grinding with a multi-coil disc). The total weight of the grinding machine is approximately 5 tons. Technical data of the STANKOIMPORT 5822M thread grinding machine - maximum workpiece diameter: 200 mm - diameter of the workpiece grinded with single-coil disc: 3-150 mm - diameter of the workpi ...
used
Semi-automatic machine Workpiece diameter 40-400 mm Max. workpiece length 2000 mm Spindle rotation frequency 16-1460 rpm Workpiece spindle speed 3-180 rpm Max. diameter of grinding: -In steady rest 120 mm -Without steady rest 360 mm Max. grinding length 1800 mm Height of centers above the table- 210 mm Max. work-piece weight- 1000 kg Grinding wheel dia min/max 500-750 mm Max. length of table travel- 1800 mm Spindle taper- Morze 6 Motor power: 13 kW Periodical feed of grinding headstock: -Max.: 0,030±0,0025 mm -Min.: 0,0025±0,0006 mm Max. axial travel of grinding headstock spindle: ±2,5 mm