We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Max wheel diameter 800 mm Module + 10 Max. spindle speed 310 rpm Max. gear width 350 mm Motor power 7.5 kw Dimensions 2550 mm × 1510 mm × 2000 mm Weight 7,2 ton.
used
Gear hobbing machine 53A50H, STANKO, with change gears
used
Gear slotting 5140, Russia production, with change gears
used
Max work-piece diameter: 1250 mm Max work-piece diameter: -With support: 850 mm -Without support: 1350 mm Max module: 12 Table diameter: 935 mm Max work-piece of producing: 2000 kg Milling length with vertical plunge cutting: 560 mm Min number of teeth machined: 20 Distance between Cutter axis and: -Arbor: 115-820 mm -Table: 230-880 mm Main motor power: 10 kW Overall dimensions: 3560x1790x2590 mm Machine weight: 14000 kg
used
Komsomolec 5K328A Gear hobbing machine Max. work piece diameter 1250 mm Max. work piece diameter with support 850 mm Table diameter 1000 mm Module 12 Max. table load 2000 kg Min. number of processed teeth 20 Max. length of processed teeth mm: - straight 560 - 30 degrees angle 400 Main drive power 10 kW Machine dimensions 3560x1790x2590 mm Machine weight 14000 kg
used
Gear hobbing machine STANKO 5B312 with change gears.
used
Spiral Bevel Gear Generator Stanko 5C280P gear diameter 800 mm, module 16 Max gear ring width 125 mm, Spindle speeds range 20-125 rpm, Main motor power 7,5 kW, Overall dimensions LxWxH 3235x2180x2200 mm, Weight 15 tons.
used
Semi-automatic machine Workpiece diameter 40-400 mm Max. workpiece length 2000 mm Spindle rotation frequency 16-1460 rpm Workpiece spindle speed 3-180 rpm Max. diameter of grinding: -In steady rest 120 mm -Without steady rest 360 mm Max. grinding length 1800 mm Height of centers above the table- 210 mm Max. work-piece weight- 1000 kg Grinding wheel dia min/max 500-750 mm Max. length of table travel- 1800 mm Spindle taper- Morze 6 Motor power: 13 kW Periodical feed of grinding headstock: -Max.: 0,030±0,0025 mm -Min.: 0,0025±0,0006 mm Max. axial travel of grinding headstock spindle: ±2,5 mm
used
The Stanko 3B70V surface grinding machine was manufactured in 1976 in the USSR. The 3B70V grinder is designed for grinding flat surfaces of various products with a maximum height of 320 mm and a weight of up to 50 kg. The machine has a working table with dimensions (L x W) 400 x 160 mm. The grinding wheel of the grinder has a diameter of 200 mm, and the power of the machine's electric motor is 1 kW. Technical data of the Stanko 3B70V magnetic surface grinding machine - dimensions of the working table (length x width): 400 x 160 mm - grinding wheel diameter: 200 mm - maximum weight of the workpiece: 50 kg - maximum height of the workpiece: 320 mm - electric motor power: 1 kW - dimensions (L x W x H): 1465 x 1950 x 1610 mm - total weight of the Stanko 3B70V grinder: 1500 kg
used
Gear grinder machine 5A841, Stanko, with change gears
used
Roll grinder machine STANKO XC3 CHS 193 under power, working condition - min. grinding diameter 240 mm - max. grinding diameter 2000 mm - max. workpiece length 6700 mm - grinding wheel diameter 600 mm - workpiece diameter: 2000 mm
used
Max. grinding length 620 mm Grinding width 200 mm Max. workpiece height 350 mm Spindle speed 1,380 rpm Vertical adjustment of the grinding spindle / infeed 370 mm / 0.002 -0.08 mm Magnetic clamping plate dimensions 200 mm x 600 mm Total power requirement 9 kW Machine weight approx. 3 t
used
grinding length: 800 mm grinding width: 200 mm workpiece height: 300 mm table adjustment: längs 850 mm table adjustment: quer 200 mm Table dimensions: 1900x450 mm table surface area: L:800 x B:200 mm grinding spindle speed: 2860 U/min spindle throat normal: 320 mm dimensions of grinding wheel: installed on machine / an M. Ø 240x26 mm dimensions of grinding wheel: bis / up to bis Ø 240 mm magnetic plate size: 630x200x100 mm feed: table quer: 0,02-0,4 mm/min total power requirement: 2,2 kW weight of the machine ca.: 1,97 t dimension machine approx.LxWxH: 2,0 x 1,4 x 2,0 m dimension coolant device LxWxH: table quer: 0,02-0,4 m
used
Inv. Num. : 7361 Type: MS 248 Producer: STANKO Generated: Parameters: The mill is in good condition.
used
STANKOIMPORT 5822M thread grinding machine was manufactured in the USSR. The machine is used for the process of grinding threads to give them the correct dimensions and roughness. During this process, a grinding wheel with a diameter of 400 mm is used to remove a small allowance from the workpiece, forming the thread shape on it. The grinding machine processes threads with a maximum diameter of 200 mm, a length of 500 mm and a weight of up to 30 kg. Depending on the choiceed disc, the diameter of the workpiece can be from 3 to 150 mm (grinding with a single-coil disc) or from 10 to 120 mm (grinding with a multi-coil disc). The total weight of the grinding machine is approximately 5 tons. Technical data of the STANKOIMPORT 5822M thread grinding machine - maximum workpiece diameter: 200 mm - diameter of the workpiece grinded with single-coil disc: 3-150 mm - diameter of the workpi ...
used
Max. grinding length: 620 mm, Sanding width: 200 mm, Max. Workpiece height: 350 mm. Spindle speed: 1,380 rpm. Magnetic clamping plate dimensions 200 mm x 600 mm, weight: 3000 kg. On-site viewing is possible.
used
Type: 3G 71M Parameters: 230 mm, 600 mm Manufacturer: Stankoimport Year of production / SO / GO: - / - / - Description: The machine is in good technical condition, after agreement the possibility of testing. Grinding width: 230 mm Grinding length: 600 mm Grinding height: 400 mm Weight: 3000kg
used
Hmotnost stroje: 32750 kg Celkový příkon stroje:: 42 kW Max. průměr broušení: 700 mm Vzdálenost hrotů: 4000 mm Max. hmotnost obrobku: 3000 kg
used
Stanko 800 mm Surface Grinding Machine Machine is made in 1984 but it has been renewed in 2022. -There is a ball screw in both axes. It has a movement sensitivity of -0.001 micron. -Automatic transition program available. -The whole system is new. -All engines are new. -7018 bearings are used in the stone shaft, 4 at the front and 2 at the rear. -Magnetic mirror can move at -3 and +3 degrees. -It has magnetic pickup feature. -Everything is new except the die-cast body. -Stone diameter 500 mm. -Maximum work height 300 mm. -15 KW Spindle motor. -7.5 KW mirror motor. -2x1.5 KW servo motors. Machine is in excellent condition
used
Radial drilling machine make STANKO type 2 A 554Machine -No: 8579, built in 1990Technical specifications:Drilling capacity i. Full ST 450 mmThread cutting ST 45 M 52Discharge 1600 mmSpindle mount MK 524 speeds 18-2000 rpm.24 feeds 0.045 - 5.0 mm / minColumn diameter 315 mmDrive power 9.0 kWDimensions L x W x H 2850 x 1030 x 3430 mmWeight approx. 4700 kgWith- Cooling deviceusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
CNC universal tool milling machine make STANKO type SMK 25/32Year of construction 1992Travel X: 510 mmTravel Y: 410 mmTravel distance Z: 400 mmSpindle mount DIN 6987 ISA 40Table surface: 800 x 400 mmPiece weight: 400 kgstepless speeds: 20 - 2000 rpm.Quill stroke: 80 mmFeed range: 1 - 3000 mm / minRapid traverse: 5 m / minDrive power: 11 kWOutside dimensions: 2600 x 2150 x 2130 mmWeight approx: 2000 kgWith- Point distance control HEIDENHAIN TNC 135- Chip collecting panused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Univ.-Milling Machine Fabr. STANKO Type 675 MFabr. -No: 1727 built in 1972Table longitudinal path X: 320 mmUpper arm lateral travel Y: 200 mmTable perpendicular path Z: 300 mmSpindle mount: MK 416 spindle speeds: 50 - 1600 rpm.16 feeds X, Y and Z: 12.5 - 400 mm / minRapid traverse X, Y and Z: 935 mm / minvertical clamping surface: 500 x 200 mmAngle table clamping surface: 630 x 200 mmDrive power: 1.5 kWDimensions L x W x H approx: 1000 x 1200 x 1700 mmWeight approx: 770 kgWith- rapid traverse- Cooling device- different tool holdersATTENTION: Without vertical milling head !!used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Capacity, ton 800 Movable die stroke, mm 180 Max. upsetting ram stroke, mm 380 Upsetting ram workstore, mm 250 Upsetting ram return stroke with closed dies, mm 130 Distance bentween upsetting ram and dies stroke forward, mm 140 Number of ram strokes per minute 35 Die dimensions, mm 590 x 220 x 660 Electric motor power, kW 40 Dimensions: mm 6300 x 3900 x 2850 Weight: kg app. 80800
used
Max. diameter of initial blank: 30 mm Blank length: -Min.: 120 mm -Max.: 300 mm Max. diameter of upset flange: 60 mm Upset slide nominal force: 2500 kN Max. force on clamping slide with dies closed: 2500 kN Stroke: -Movable die: 100 mm -Upset slide (full): 220 mm -Die closing: 140 mm Slide strokes per minute: 45 Machine overall dimensions: -Length: 6050 mm -Width: 4600 mm -Height: 2260 mm Machine weight: 24680 kg
used
- The largest diameter of the workpiece, mm 90 - The maximum diameter of the planted flange, mm 120 - Rated force of the landing slide, kN 6300 - The force perceived by the clamping slide with closed dies, kN 6300 - stroke of the landing slider, mm 350 - The stroke of the landing slide after closing the dies, mm 230 - The frequency of continuous idle slider per minute, not less than 42 - Power of the electric motor 45 - Dimensions, mm length 4835 width 3450 height 2880