STANKO used machine for sale

Inv. Num. : 7361 Type: MS 248 Producer: STANKO Generated: Parameters: The mill is in good condition.

Slotting machine - vertical / Stanko 7A420M -Plunger stroke 200mm E2n0GMI -Table diameter 500mm -Projection 400mm -Stroke rate 40 - 163 strokes/min -Spacing - Knife / Table320mm -Adjustment of the table 360 degrees / rotary table -Adjustment of the table / longitudinal 500mm -Adjustment of the table / transverse 400mm -Rapid traverse 1.8 m/min -Feed 0.1 - 1.2mm -Total power requirement 4 KW Dimensions: LxWxH 2.3x1.5x2.2 meters / Weight 2.2 to

Spline shaft milling machine STANKO 5350 without change gears.

Gear hobbing machine STANKO 5B312 with change gears.

Travel X-axis 1200 mm Travel Y-axis 1600 mm Travel Z-axis 2000 mm Table length: 1245 mm Table width: 1115 mm Morse 6

Key data: 250 mm

Machine Type: Hacksaw Machine Manufacturer: STANKO Model No.: 8725 Year of construction: 1986 Condition: good Offer Type: Used Machine Specifications: Cutting area: Ø 250 mm Drive type: el./hydr. Propulsion: 2.2 kW Remark: coolant device, Hydraulic lift-off Weight: 500 kg The machine is in good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.

grinding length: 800 mm grinding width: 200 mm workpiece height: 300 mm table adjustment: längs 850 mm table adjustment: quer 200 mm Table dimensions: 1900x450 mm table surface area: L:800 x B:200 mm grinding spindle speed: 2860 U/min spindle throat normal: 320 mm dimensions of grinding wheel: installed on machine / an M. Ø 240x26 mm dimensions of grinding wheel: bis / up to bis Ø 240 mm magnetic plate size: 630x200x100 mm feed: table quer: 0,02-0,4 mm/min total power requirement: 2,2 kW weight of the machine ca.: 1,97 t dimension machine approx.LxWxH: 2,0 x 1,4 x 2,0 m dimension coolant device LxWxH: table quer: 0,02-0,4 m

Nominal force, kN 1600 Slider stroke, mm 320 Distance between table and slide, mm 320 Distance between table and slide, mm 320 Main drive motor power kW 16 Table size width / length mm 580/650 Machine dimensions Length Width Height (mm) 2560_2020_3840 Weight kg 11000

Key data: 1000 mm, 8000 mm, 650 mm

solid design, solid hardened bed with double prism guide of the bed carriage Diameter over bed / support 1000 mm / 650 mm Center width 8000 mm Speed range (24) 5 - 500 1/min Spindle bore 128 mm Tailstock Inner Taper MK 6 Drive power 22 kW Weight: approx. 20,000 kg Dimensions LxWxH approx. 11x2x2 m Incl. Coolant system in the foot Mechanically driven upper support Rapid traverse longitudinal/transverse 3-B chuck Bison D 630 mm 1 x following rest 1 x fixed rest diameter approx. 800 mm 2 x fixed rest diam. approx. 500 mm

Key data: 60 mm, 1600 mm

Specifications: - Drilling capacity 60 mm - Projection 1600 mm - Drilling spindle mount MK 5 - Drilling spindle stroke 390 mm - Spindle speeds, 20 steps 20 - 2000 rpm - Clockwise and counterclockwise rotation - Feed, 12 steps 0.056 - 2.5 mm/rev - Drive 400 V / 12.8 kW - Electromechanical clamping of the boom and drilling unit - Distance between machined machine bed – drill quill - min. approx. 900 mm - max. approx. 1600 mm - usable machine bed with 4 T-slots 950 x 1700 mm - Coolant device - Dice table - Space requirement approx. W 2600 x H 3000 x D 1000 mm - Weight approx. 4500 kg

Nominal weight of the falling parts: 750 kg Max. number of blows per minute: 105 Kinetic energy: 1900 kg Distance from an axis of the slider up to bed: 750 mm Cylinder diameter: 600 mm Diameter of the plunger: 630 mm Max. headstock travel: 835 mm Dimensions: -Left-to-right: 3940 mm -Front-to-back: 1430 mm Height above floor level: 3260 mm Weight: -With an anvil-block: 25600 kg -Without an anvil-block: 16600 kg

Manufacturer | Manufacturer: Stanko Type | Type: 16k20 Stock Number | Stock Number: 0980 Year of construction | Year of manufacture: 1978 Turning length | Turning length: 1000 mm Swing diameter over bed | Swing diameter over bed: 440 mm Spindelbohrung Spindle bore: 50 mm RPM | turning speed: 12.5 - 1600 rpm Tension | Voltage: 380 V Engine power | Drive power: 10 kW Dimensions (LxWxH) | Dimensions (LxWxH): 2800 x 1200 x 1800 mm Weight Machine | Weight of machine: 2,5 t

Manufacturer: Stanko Type: H5222A Stock number: 0982 Punching: Ø30 in 16mm Notching: 100 x 12mm Round material: 45 mm Square material: 40 x 40 mm Angle steel: 125 x 125 x 12 mm Dimensions (LxWxH): 2000 x 1400 x 2400 mm Machine weight: 2.35 t

Capacity 250 ton Kinetic energy of moving parts at the end of max. ram stroke 13,5 kj Max. ram stroke 400 mm Number of ram stokes (SPM) 34 Slide clearance 560 mm Ram size (front-back 560 mm Table size 670 x 750 mm Lower ejector capacity 16 ton Lower ejector movement 105 mm Main drive motor powe 15 kW Press dimensions 3710 x 1925 x 4415 mm Press weight 18000 kg

Max work-piece diameter: 1250 mm Max work-piece diameter: -With support: 850 mm -Without support: 1350 mm Max module: 12 Table diameter: 935 mm Max work-piece of producing: 2000 kg Milling length with vertical plunge cutting: 560 mm Min number of teeth machined: 20 Distance between Cutter axis and: -Arbor: 115-820 mm -Table: 230-880 mm Main motor power: 10 kW Overall dimensions: 3560x1790x2590 mm Machine weight: 14000 kg

Capacity 250 ton Kinetic energy of moving parts at the end of max. ram stroke 13,5 kj Max. ram stroke 400 mm Number of ram stokes (SPM) 34 Slide clearance 560 mm Ram size (front-back 560 mm Table size 670 x 750 mm Lower ejector capacity 16 ton Lower ejector movement 105 mm Main drive motor powe 15 kW Press dimensions 3710 x 1925 x 4415 mm Press weight 18000 kg

Spiral Bevel Gear Generator Stanko 5C280P gear diameter 800 mm, module 16 Max gear ring width 125 mm, Spindle speeds range 20-125 rpm, Main motor power 7,5 kW, Overall dimensions LxWxH 3235x2180x2200 mm, Weight 15 tons.

Air forging hammer Stanko MB 4134 Year of manufacture: 1988 Nominal weight of falling parts, kg: 250 Energy of impact, Kj: 5,6 The greatest number of impacts in a minute: 150 Ram axis-to-frame distance, mm: 420 Working zone daylight, mm: 450 Die impression size, mm: 510 x 80 Main electric motor power kW: 22 Weight of a hammer with an anvil-block, kg: 7850 Price 6500 EUR

Table 1120x4000mm 2 milling and 2 planing heads, and 1 grinding head Workpiece dimensions WxH 1250x1120 Spindle speed: - Vertical (stepless) 5...1800 rpm - Horizontal (4 speeds) 100;200;500;1000 rpm Limits of working feeds at milling: - of a table 25...10000 - Supports and movable-sleeves 5...2500 Stroke length Sliders 300 mm Power of electric motors: -table in a planing mode 90kW -vertical spindle 30kW -vertical horizontal 22/26kW Machine overall dimensions: 10600x5400x4600 mm Machine weight 41t

Roll grinder machine STANKO XC3 CHS 193 under power, working condition - min. grinding diameter 240 mm - max. grinding diameter 2000 mm - max. workpiece length 6700 mm - grinding wheel diameter 600 mm - workpiece diameter: 2000 mm

Gear grinder machine 5A841, Stanko, with change gears

Gear slotting 5140, Russia production, with change gears

Gear hobbing machine 53A50H, STANKO, with change gears

The Stanko 3B70V surface grinding machine was manufactured in 1976 in the USSR. The 3B70V grinder is designed for grinding flat surfaces of various products with a maximum height of 320 mm and a weight of up to 50 kg. The machine has a working table with dimensions (L x W) 400 x 160 mm. The grinding wheel of the grinder has a diameter of 200 mm, and the power of the machine's electric motor is 1 kW. Technical data of the Stanko 3B70V magnetic surface grinding machine - dimensions of the working table (length x width): 400 x 160 mm - grinding wheel diameter: 200 mm - maximum weight of the workpiece: 50 kg - maximum height of the workpiece: 320 mm - electric motor power: 1 kW - dimensions (L x W x H): 1465 x 1950 x 1610 mm - total weight of the Stanko 3B70V grinder: 1500 kg

Pneumatic air forging hammer STANKO MA4129 Weight of the falling parts: 80 kg Number of strokes per min: 210 Effective kinetic energy of falling part by stroke: 140 kg/m Distance from ram axis-to-frame: 300 mm Anvil dimensions: -Length: 130 mm -Width: 63 mm -Anvil height above the floor: 800 mm Diameter of working cylinder: 250 mm Diameter of compressor cylinder: 260 mm Stroke run: 385 mm Optimal stamping section of work-piece: -Square: 60 mm -Rounded: 80 mm Overall dimensions mm: -Length: 790 mm -Width: 1566 mm -Height: 1900 mm Weight of the hammer with an anvil-block: 3100 kg Price 3100 EUR

Semi-automatic machine Workpiece diameter 40-400 mm Max. workpiece length 2000 mm Spindle rotation frequency 16-1460 rpm Workpiece spindle speed 3-180 rpm Max. diameter of grinding: -In steady rest 120 mm -Without steady rest 360 mm Max. grinding length 1800 mm Height of centers above the table- 210 mm Max. work-piece weight- 1000 kg Grinding wheel dia min/max 500-750 mm Max. length of table travel- 1800 mm Spindle taper- Morze 6 Motor power: 13 kW Periodical feed of grinding headstock: -Max.: 0,030±0,0025 mm -Min.: 0,0025±0,0006 mm Max. axial travel of grinding headstock spindle: ±2,5 mm

Pneumatic air forging hammer Stanko MA4132 Weight of the falling parts: 196 kg Number of strokes per min: 210 Effective kinetic energy of falling part by stroke: 330 kg/m Distance from ram axis-to-frame: 340 mm Anvil height above the floor: 750 mm Stroke run: 460 mm Striking area: 75x190 mm Motor: 15kW Overall dimensions mm: -Length: 930 mm -Width: 1860 mm -Height: 2160 mm Weight of the hammer: 3450 kg Weight of anwill 1650 kg Price 3800 EUR

- The largest diameter of the workpiece, mm 90 - The maximum diameter of the planted flange, mm 120 - Rated force of the landing slide, kN 6300 - The force perceived by the clamping slide with closed dies, kN 6300 - stroke of the landing slider, mm 350 - The stroke of the landing slide after closing the dies, mm 230 - The frequency of continuous idle slider per minute, not less than 42 - Power of the electric motor 45 - Dimensions, mm length 4835 width 3450 height 2880

Max. diameter of initial blank: 30 mm Blank length: -Min.: 120 mm -Max.: 300 mm Max. diameter of upset flange: 60 mm Upset slide nominal force: 2500 kN Max. force on clamping slide with dies closed: 2500 kN Stroke: -Movable die: 100 mm -Upset slide (full): 220 mm -Die closing: 140 mm Slide strokes per minute: 45 Machine overall dimensions: -Length: 6050 mm -Width: 4600 mm -Height: 2260 mm Machine weight: 24680 kg

Capacity, ton 800 Movable die stroke, mm 180 Max. upsetting ram stroke, mm 380 Upsetting ram workstore, mm 250 Upsetting ram return stroke with closed dies, mm 130 Distance bentween upsetting ram and dies stroke forward, mm 140 Number of ram strokes per minute 35 Die dimensions, mm 590 x 220 x 660 Electric motor power, kW 40 Dimensions: mm 6300 x 3900 x 2850 Weight: kg app. 80800