We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Semi-automatic machine Workpiece diameter 40-400 mm Max. workpiece length 2000 mm Spindle rotation frequency 16-1460 rpm Workpiece spindle speed 3-180 rpm Max. diameter of grinding: -In steady rest 120 mm -Without steady rest 360 mm Max. grinding length 1800 mm Height of centers above the table- 210 mm Max. work-piece weight- 1000 kg Grinding wheel dia min/max 500-750 mm Max. length of table travel- 1800 mm Spindle taper- Morze 6 Motor power: 13 kW Periodical feed of grinding headstock: -Max.: 0,030±0,0025 mm -Min.: 0,0025±0,0006 mm Max. axial travel of grinding headstock spindle: ±2,5 mm
used
The Stanko 3B70V surface grinding machine was manufactured in 1976 in the USSR. The 3B70V grinder is designed for grinding flat surfaces of various products with a maximum height of 320 mm and a weight of up to 50 kg. The machine has a working table with dimensions (L x W) 400 x 160 mm. The grinding wheel of the grinder has a diameter of 200 mm, and the power of the machine's electric motor is 1 kW. Technical data of the Stanko 3B70V magnetic surface grinding machine - dimensions of the working table (length x width): 400 x 160 mm - grinding wheel diameter: 200 mm - maximum weight of the workpiece: 50 kg - maximum height of the workpiece: 320 mm - electric motor power: 1 kW - dimensions (L x W x H): 1465 x 1950 x 1610 mm - total weight of the Stanko 3B70V grinder: 1500 kg
used
Gear grinder machine 5A841, Stanko, with change gears
used
Roll grinder machine STANKO XC3 CHS 193 under power, working condition - min. grinding diameter 240 mm - max. grinding diameter 2000 mm - max. workpiece length 6700 mm - grinding wheel diameter 600 mm - workpiece diameter: 2000 mm
used
grinding length: 800 mm grinding width: 200 mm workpiece height: 300 mm table adjustment: längs 850 mm table adjustment: quer 200 mm Table dimensions: 1900x450 mm table surface area: L:800 x B:200 mm grinding spindle speed: 2860 U/min spindle throat normal: 320 mm dimensions of grinding wheel: installed on machine / an M. Ø 240x26 mm dimensions of grinding wheel: bis / up to bis Ø 240 mm magnetic plate size: 630x200x100 mm feed: table quer: 0,02-0,4 mm/min total power requirement: 2,2 kW weight of the machine ca.: 1,97 t dimension machine approx.LxWxH: 2,0 x 1,4 x 2,0 m dimension coolant device LxWxH: table quer: 0,02-0,4 m
used
Table clamping width: 200mm Table clamping length: 600mm Machine in good technical condition, currently disconnected.
used
Hmotnost stroje: 32750 kg Celkový příkon stroje:: 42 kW Max. průměr broušení: 700 mm Vzdálenost hrotů: 4000 mm Max. hmotnost obrobku: 3000 kg
used
Stanko 800 mm Surface Grinding Machine Machine is made in 1984 but it has been renewed in 2022. -There is a ball screw in both axes. It has a movement sensitivity of -0.001 micron. -Automatic transition program available. -The whole system is new. -All engines are new. -7018 bearings are used in the stone shaft, 4 at the front and 2 at the rear. -Magnetic mirror can move at -3 and +3 degrees. -It has magnetic pickup feature. -Everything is new except the die-cast body. -Stone diameter 500 mm. -Maximum work height 300 mm. -15 KW Spindle motor. -7.5 KW mirror motor. -2x1.5 KW servo motors. Machine is in excellent condition
used
Max wheel diameter 800 mm Module + 10 Max. spindle speed 310 rpm Max. gear width 350 mm Motor power 7.5 kw Dimensions 2550 mm × 1510 mm × 2000 mm Weight 7,2 ton.
used
Radial drilling machine make STANKO type 2 A 554Machine -No: 8579, built in 1990Technical specifications:Drilling capacity i. Full ST 450 mmThread cutting ST 45 M 52Discharge 1600 mmSpindle mount MK 524 speeds 18-2000 rpm.24 feeds 0.045 - 5.0 mm / minColumn diameter 315 mmDrive power 9.0 kWDimensions L x W x H 2850 x 1030 x 3430 mmWeight approx. 4700 kgWith- Cooling deviceusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
CNC universal tool milling machine make STANKO type SMK 25/32Year of construction 1992Travel X: 510 mmTravel Y: 410 mmTravel distance Z: 400 mmSpindle mount DIN 6987 ISA 40Table surface: 800 x 400 mmPiece weight: 400 kgstepless speeds: 20 - 2000 rpm.Quill stroke: 80 mmFeed range: 1 - 3000 mm / minRapid traverse: 5 m / minDrive power: 11 kWOutside dimensions: 2600 x 2150 x 2130 mmWeight approx: 2000 kgWith- Point distance control HEIDENHAIN TNC 135- Chip collecting panused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Univ.-Milling Machine Fabr. STANKO Type 675 MFabr. -No: 1727 built in 1972Table longitudinal path X: 320 mmUpper arm lateral travel Y: 200 mmTable perpendicular path Z: 300 mmSpindle mount: MK 416 spindle speeds: 50 - 1600 rpm.16 feeds X, Y and Z: 12.5 - 400 mm / minRapid traverse X, Y and Z: 935 mm / minvertical clamping surface: 500 x 200 mmAngle table clamping surface: 630 x 200 mmDrive power: 1.5 kWDimensions L x W x H approx: 1000 x 1200 x 1700 mmWeight approx: 770 kgWith- rapid traverse- Cooling device- different tool holdersATTENTION: Without vertical milling head !!used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Capacity, ton 800 Movable die stroke, mm 180 Max. upsetting ram stroke, mm 380 Upsetting ram workstore, mm 250 Upsetting ram return stroke with closed dies, mm 130 Distance bentween upsetting ram and dies stroke forward, mm 140 Number of ram strokes per minute 35 Die dimensions, mm 590 x 220 x 660 Electric motor power, kW 40 Dimensions: mm 6300 x 3900 x 2850 Weight: kg app. 80800
used
Max. diameter of initial blank: 30 mm Blank length: -Min.: 120 mm -Max.: 300 mm Max. diameter of upset flange: 60 mm Upset slide nominal force: 2500 kN Max. force on clamping slide with dies closed: 2500 kN Stroke: -Movable die: 100 mm -Upset slide (full): 220 mm -Die closing: 140 mm Slide strokes per minute: 45 Machine overall dimensions: -Length: 6050 mm -Width: 4600 mm -Height: 2260 mm Machine weight: 24680 kg
used
- The largest diameter of the workpiece, mm 90 - The maximum diameter of the planted flange, mm 120 - Rated force of the landing slide, kN 6300 - The force perceived by the clamping slide with closed dies, kN 6300 - stroke of the landing slider, mm 350 - The stroke of the landing slide after closing the dies, mm 230 - The frequency of continuous idle slider per minute, not less than 42 - Power of the electric motor 45 - Dimensions, mm length 4835 width 3450 height 2880
used
Stroke: 0 mm Throat: 0 mm Table diameter: 0 mm MERK Stanko TYPE 7A420 M YEAR 70 er Stanko 7A420M Steek bank
used
Type: Stanko 1516 Max workpiece height: 1000 mm Vertical caliper max horizontal travel: 950 mm max vertical travel: 700 mm Horizontal caliper max horizontal travel: 630 mm max vertical travel: 1000 mm Crossbar max travel: 660 mm Chuck dia.: 1400 mm Max turningdia -- passage: 1600 mm Power on the spindle: 30 kW Number of speeds: 5 > 2 Long : 3170 mm Wide: 3030 mm Height: 4100 mm Weight: 20 ton
used
Type: Stanko 1512 Max workpiece height: 1000 mm Vertical caliper max horizontal travel: 775 mm max vertical travel: 700 mm Horizontal caliper max horizontal travel: 630 mm max vertical travel: 1000 mm Crossbar max travel: 660 mm Chuck dia.: 1120 mm Max turningdia -- passage: 1250 mm Power on the spindle: 30 kW Number of speeds: 5 > 250 rpm Long : 2750 mm Wide: 2975 mm Height: 4100 mm Weight: 16,5 ton
used
Gear hobbing machine 53A50H, STANKO, with change gears
used
Gear slotting 5140, Russia production, with change gears
used
Box-stand gear drilling machine make STANKO type 2 H 118Fabr. -No: 43358Technical specifications:Drilling capacity steel: 22 mmSpindle mount: MK 2Table size: 360 x 320 mmDrill head and table height adjustable6 feed rates: 0.1-0.569 spindle speeds: 180 - 2800 rpmMotor power: 1.5 kWExternal dimensions L x W x H: 500 x 700 x 2000 mmWeight approx: 350 kgWith- coolant device- right + left run- automatic feedused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Radial drilling machine make STANKO type 2 A 554Machine -No: 7837Technical specifications:Drilling capacity i. Full ST 4 50 mmThread cutting ST 4 M 52Projection: 1600 mmSpindle mount: MK 524 speeds: 18-2000 rpm.24 feeds: 0.045 - 5.0 mm / minColumn diameter: 315 mmDrive power: 9.0 kWDimensions L x W x H: 2850 x 1030 x 3430 mmWeight approx: 4700 kgusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Radial drilling machine make STANKOIMPORT type 2 K 52-1Fabr. -No: 176Technical specifications:Drilling capacity in steel: 25 mmmin./max projection: 300/800 mmVertical boom adjustment: 625 mm8 spindle speeds: 63 - 1600 rpmSpindle mount: MK 2Workpiece height: 1000 mmQuill stroke: 250 mmFeeds: 0.125 - 0.2 - 0.315 mm / revColumn diameter: 180 mmClamping surface of the base plate: 900 x 630 mmDistance table-lower spindle: 125/1000 mmTotal power requirement: 1.5 kWExternal dimensions LxWxH: 1760 x 915 x 1970 mmMachine weight approx: 1.25 tused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Table 1120x4000mm 2 milling and 2 planing heads, and 1 grinding head Workpiece dimensions WxH 1250x1120 Spindle speed: - Vertical (stepless) 5...1800 rpm - Horizontal (4 speeds) 100;200;500;1000 rpm Limits of working feeds at milling: - of a table 25...10000 - Supports and movable-sleeves 5...2500 Stroke length Sliders 300 mm Power of electric motors: -table in a planing mode 90kW -vertical spindle 30kW -vertical horizontal 22/26kW Machine overall dimensions: 10600x5400x4600 mm Machine weight 41t
used
Max work-piece diameter: 1250 mm Max work-piece diameter: -With support: 850 mm -Without support: 1350 mm Max module: 12 Table diameter: 935 mm Max work-piece of producing: 2000 kg Milling length with vertical plunge cutting: 560 mm Min number of teeth machined: 20 Distance between Cutter axis and: -Arbor: 115-820 mm -Table: 230-880 mm Main motor power: 10 kW Overall dimensions: 3560x1790x2590 mm Machine weight: 14000 kg