We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Tool Presetting Machine make SOMET type SPS 200 UK 019 200 No: S 4/194 built in 1987Outside dimensions approx: 660 x 730 x 1600 mmWith- Profile projectorused, from an operational resolutionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offerand are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Tool presetter SOMET type SPS 500 U Masch. No. S1-020 Year of construction 1987 Table surface 545 x 1000 mm Travel X = 500 mm, Y = 340 mm Width in the portal 550 mm Height table - lower edge portal 250 mm - portal longitudinal guide right un left on the table - adjustment via very fine threaded spindles with handwheel - Quick adjustment via electric release - Projector screen 150 mm with crosshairs and coordinates MEOPTA PMP100 - 2 pieces clamping devices for tool measurement - on substructure with shelf and drawer Space requirement L x W x H: 1100 x 700 x 1650 Weight 560 kg good condition; used
used
20 Somet Thema E11 Year 1993-1994 360cm width 6 Harness Frames 1 IRO weft feeder 2 Beams (twin beam) 1 Cloth roll 10 Looms working and 10 looms are stopped Each loom can be tested before shipment.
used
working area: 50 - 75 mm working area: 75 - 100 mm working area: 200 - 300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
+++ ATTENTION - PRICE DROP!!! +++ Prices are rising, ours are falling!!! +++ Our prices are reduced by 50% now, +++ due to warehouse restructuring!!! +++ Also, consider taking a look at our other offers in stock. Tool presetter Zoller V 520 manufacturer: Zoller type: V 520 year of construction: 2000 comm.-nr.: 0200/133/083/0416 stock-nr.: 1909 +++ Regular Price: 3.850,- € > Reduced Price: 1.925,- € BN +++ All prices are shown without taxes (net price) Technical Data (According to manufacturer) Measuring area X-Axis: 210 mm Measuring area Z-Axis: 620 mm (tower height 800 mm) tool reception: SK 50 / 0300106 / Z=+20.000 current: 220 V / 50-60 Hz weight: ca. 400 kg standing area: W 1,40 x D 0,70 x H 1,90 mm voltage: 220 V / 50 Hz weight: ca. 350 kg standing area: W 950 x D 1005 x H 1600 mm features * Digital measuring device “Heidenh ...
used
Tool adjuster, adjustment and measuring instrument used Manufacturer E. Zoller Type: V420D2-00172 EC Type: V420D2-00294 VENTURION 500 Built: 2003 Dimensions: approx. 1600 x 1000 x 2000 mm
used
Item no. 5044: 1 gebr. Tool Presetting Device Fabr. ZOLLER, Type V 400 Z , Bauj. 2002
used
No. 5153: 1 gebr. Tool Presetting Device Fabr. ZOLLER
used
- DOCUMENTS AND MANUALS INCLUDED WE ORGANIZE SHIPPING AS WELL Max. concentricity errors at 300 mm: 0.008 mm RS232 / USB : interface Measuring range diameter (x) 310 mm Application range height (z) 320 mm Weight 90 Kg Max. tolerated errors (mechanical) 0.003 mm Max. tolerated errors (vision system) 0.005 mm Max. radius measurements < 5% - Max. angle measurements errors < 0.2° Max. concentricity errors adapter 0.002 mm Max. resolution 0.001 mm Max. manual moving speed 1 m/s INSERT CONUS MK5 IT WAS USED BY LATHE CNC DOOSAN PUMA
used
Dimensions (LxWxH) approx. 2,600 x 1,000 x 1,600 mm Weight approx. 1,300 kg machine number 833, Digital display chalice PICO Version A 23, Clamping length approx. 2000 mm, clear width in the passage (portal) 740 x 320 mm
used
Key data: 530 mm
KELCH KALI-tec A tool presetter built in Germany in 2004 is a high-tech device for accurate measuring, presetting and simultaneous tool shrinking. The state-of-the-art KELCH tool presetter with integrated induction coil is offered with equipment that includes e.g. the electronic measuring system with intelligent image processing KELCH EasyVision and the KELCH Easy Webset computer software for tool measurement and inspection. The tool length is determined by the setting adapters before the chuck heating phase. The KALI-tec A tool measuring and presetting machine then automatically sets the tool exactly to the target length during the chuck opening phase by heating, while for more complex measuring tasks or tools made of high-speed steel the KELCH i-tec shrink-fit device shrinks the tool to the target length using intelligent calculations and pre-positioning of the setting pins. Tech ...
used
Used DMG Microset ECO 210 tool presetter system for sale. Available at our machine tool warehouse at 50720 Zaragoza Spain for inspection and immediate delivery. The efficiency of the DMG Microset ECO 210 tool presetting machines optimizes the machining process right from the start. Helps increase the life of your tools, achieve better surface finishes and improve overall safety in your production. Tool presetting with highest precision and speed. Its satisfies all aplication needs and offers the perfect solution for various tool sizes and machine environments The highly efficient tool presetting devices from DMG Microset are the most productive and efficient. Presetting parallel to production time leads to significative time savings: setup times are optimized and machine downtimes are significantly reduced. Improved tooling with safe, early detection of damaed toosl reduces t ...
used
Travel Z - axis (tool length) max. 500 mm Travel X - axis (tool diameter) max. 330 mm Tool holder (basic holder) SK 50 With calibrated adapter for tool holder SK 40 with calibration edge With label printer, incl. replacement labels POS-CAM II camera system The camera system was renewed in 2020 The tool presetter is in a very neat condition, checked, cleaned, ready for immediate use. Manuals and instruction manuals are available The camera system can also be used to inspect the tool cutting edges (last picture).
used
Ref.Nr. 00799 Name of the system Tool presetter Manufacturer: PWB Swiss, CH-9450 Altstätten Model Tool Master 10 Year of construction 2012
used
Adapter for tool presetters The adapter is plugged into the SK50 basic holder of the tool presetter and thus serves as an intermediate module for Tool holders with size SK30 or BBT30. The adapter is calibrated and equipped with calibration balls.
used
We sell a used Zoller tool presetter, Year of construction 2002 Dimensions approx. 2m*1m*2.2m high Type V720B2-00173 Zoller IPC, Type JQ87/12G With the photographed accessories (e.g. HSK100) and original instruction manual VAT on the invoice can be shown, Price plus VAT
used
Measuring range X = 200 mm, Z = 400 / 700 mm / Microvision III Spindle type SK50
used
Key data: 160 mm, 400 mm
Type smile 400 VSM400-00475 Year of construction 2004 Travel X 160 mm Z 400 mm Diameter 320 mm Longitudinal measuring range 400 mm Measuring diameter 320 mm Other equipment and accessories: Adapter from SK50 -> SK40 Adapter from SK50 -> VDI30 Adapter from SK50 -> HSK63 Software Zoller DNC manager Vers. 1.04.2
used
Zoller - V420D1 - 00265 Measuring range : X150 (300)mm , Z-450mm, Shots : SK50 , SK40 , HSK . Instruction manual and software CDs available !
used
Key data: 210 mm
Tool presetter Zoller Smile 400 Year of construction 2012 Z-axis measuring range: 400 mm Measuring range X-axis: 210 mm Tool diameter max.: 420 mm Repeatability (+/-) 0.002 mm Tolerance indicator: 0.001 mm Concentricity: 0.002 mm Automatic cutting edge shape and range detection Autofocus via CNC-controlled spindle axis (C-axis) Spindle indexing Automatic Zero Point Monitoring Tool Data Management Adapter Management The presetter is fully functional and in very good condition. It has been serviced annually by Zoller (Last maintenance 25.11.2022) Price net free loading from stock
used
Measuring range Z-axis 500 mm Measuring range X-axis 400 mm Adapter SK50 Compressed air connection 4-6 bar Tool weight max. 31 kg Dimensions L-W-H 1300 x 700 x 1900 mm Weight 300 kg Manual focus (= no autofocus for Cris measurements) Last maintenance + review of Zoller 12.2020 Accessories: HSK 63 Adapter Printer
used
Tool presetting device make ZOLLER type H 4000Machine -No: FC II 4000/039, built in 1985Measuring range: 320 x 270 mmProjector diameter: 150 mmMagnification: 20 timesMeasuring system: Heidenhain LS 503 DOutside dimensions: 1490 x 650 x 1850 mmelec. Connection: 220 V / 50 HzWeight: 350 kgWith- Input unit type 6080- Tool holders ISA 50usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Tool presetter Fabr. MESSMA KELCH ROBOT Type Trabant 273 EA 6Machine -No: 2224 Year 1986Measuring range longitudinal axis: 270 mmTransverse axis measuring range: 270 mmScreen diameter: 150 mmMagnification: 20 timesGraduation with vernier: 2 x 0 - 180 °Weight approx: 510 kgOutside dimensions approx: 985 x 730 x 1300 mmWith- Measuring electronics EA 6- 2-axis digital display- rotatable 3-way tool holderused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Tool presetting device make ZOLLER type H 4000 / H 4012/132Year of construction 1988Technical specifications:Turntable diameter: 750 mmNumber of tool holders: 4External dimensions approx: 2000 x 850 x 1700 mmWith- 2-axis digital display Zoller 6051- Profile projectorused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
measuring range X-axis: 520 mm measuring range Y-axis: 500/800 mm Table dimensions: 800 mm dimensions of the machine ca.: 2,5x1,2x1,8 m Total weight, approx.: 1300 kg Schnellverstellung: CNC, motorisch oder selektive Einhandbedienung. Feinverstellung: µ-genau mit CNC oder elektr.Handrädern Schneidenabtastung: CCD-Kamera mit telezentrischem Obejektiv Messsteuerung: KELCH-EASY WEBSET auf Basis IPC The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.