Category: 819 presses: accessories and spare parts / Offset printing plates
Latest update: 03.05.2021 add to watchlist
approved
dealer
item-No.: 152678320
New in: 1997

used

check Seller: 3p Vertriebsgesellschaft mbH
Location: Land-de

add to watchlist

Category: 109 other metal working machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 160453675

used

Location: Land-de
Price: 950 € add to watchlist

Straightening and welding plate SIEGFRIED WEYRAUCH Gemmingen cast steel strongly ribbed Length 1000 mm Width 800 mm Thickness 28/125 mm Working height approx. 850 mm - Feet with adjustment screws for aligning the plate Weight 370 kg good surface; used

Category: 106 presses / Open Gap Eccentric Presses
Latest update: 11.03.2024 add to watchlist
approved
dealer
item-No.: 160173320
New in: 1993

used

check Seller: FORMEX SK s.r.o.
Location: 91943 CIFER Land-sk

add to watchlist

Nominal force 400 kN Stroke rate - 70/140 / min Motor 3/4 kW Exploitable stroke - at constant. Clutch brake temperature 50/45/min Capacity - material thickness 4-6.4 m - with single strokes, 2-3.2 mm - with continuous stroke Table 660 x 530 mm, table top 650 x 515 x 75 mm Stroke adjustment - 10-125 mm, Dimensions 1250 x 1600 x 2370 mm - High , Btto 4500 kg Reconditioned machine - warranty 9 months from delivery date

Category: 106 presses / Eccentric Presses
Latest update: 11.03.2024 add to watchlist
approved
dealer
ankerimg
item-No.: 152895920
New in: 1992

used

check Seller: FORMEX SK s.r.o.
Location: Land-sk

add to watchlist

Rated press force 400 kN Impact stroke 8-95 mm Stroke stroke number 70/142 /min Impact adjustment 60 mm Table area 660x530 mm Impact surface 400x250 mm Recording 3-4 kW Compressed air operating pressure 0.6 Mpa

Category: 106 presses / Eccentric Presses
Latest update: 05.02.2024 add to watchlist
item-No.: 163276127
New in: 1974

used

Seller: Klumper
Location: Land-pl
Price: 13.000 € add to watchlist

The press has been completely renovated. Scope of work: cleaning and repainting of the body and covers, regeneration of clutch wheel disc linings, new pneumatic installation, new electrical installation, new control (Fiessler FMSC controllers, Siemens control panel, foot limit switch), installation of feet, new user manual and documented modernization history. Original documentation available. Pressure: 25 tons Max. number of strokes/min: 125 Slider stroke: 8-60mm Slider adjustment range: 55mm Weight: 1400 kg

Category: 106 presses / Coining Presses
Latest update: 27.07.2023 add to watchlist
approved
dealer
item-No.: 157542230
New in: 1979

used

check Seller: Eurostakles.lt UAB
Location: 02300 Vilnius Land-lt

add to watchlist

Capacity: 1000 tons Stroke: 140 mm Table plate size: 910x920 mm Ram adjustment: 15 mm Main motor power: 28 kw Total power: 30 kW Dimensions (length x width x height): 2100x2500x4700 mm Height above floor: 3800 mm Total weight: 31000 kg

Category: 106 presses / Crank Presses
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 158766206
New in: 1977

used

check Seller: AMARON s.r.o.
Location: Land-cz

add to watchlist

Inv. Num. : 4164 Type: LKT 250 Producer: SMERAL Created: 1977 Parameters: Pressing force: 250 t Table: 1575 x 1150 mm plunger stroke: 250 mm Stroke: 20/min Plunger adjustment: 100 mm Installation height: 750 mm Shock dimensions: 1380 x 850 mm Motor power: 28 kW Dimensions 2800 x 1240 x 4450 mm Machine weight: 23400 kg

Category: 106 presses / Crank Presses
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 161289940
New in: 1980

used

check Seller: AMARON s.r.o.
Location: Land-cz

add to watchlist

Inv. Num. : 6606 Type: LDC 250 Producer: SMERAL Created: 1980 Parameters: Compressive force: 250 t Maximum stroke rate upper table: 38 1/min Ram stroke: 200 mm Adjustment of the plunger: 120 mm

Category: 106 presses / Other Mechanical Presses
Latest update: 12.03.2024 add to watchlist
approved
dealer
item-No.: 161758016
New in: 1985

used

check Seller: Evelin of America Corporation
Location: Land-us

add to watchlist

year 1985 Capacity 2500 / 2750 Ton 24900 / 27400 kN Speed 65 SPM, continuous mode Ram/Slide Stroke 12.60in, 320.00mm Ram/Slide Adjustment 0.39in, 10.00mm Shut Height (Ram / Slide Down, Adjustment Up) 35.60in, 905.00mm Stroke of Upper Knockout 2.00in, 50.00mm Stroke of Lower Knockout 2.80in, 70.00mm Ram/Slide Width 52.00 in, 1320.00 mm Ram/Slide Height 43.00 in, 1100.00 mm Bed Width 53.00 in, 1340.00 mm Bed Depth 55.00 in, 1400.00 mm power Existing Additional 28 Strokes per minute in manual mode, height shown is above floor, total height is 291 in ( 7390 mm), new quick change hydraulic type bolster Machine Length 160.00 in, 4055.00 mm Machine Width 157.00 in, 4000.00 mm machine height 264.00 in, 6710.00 mm Weight 320000 lbs, 145455 kg Condition Excellent Currently disassembled an ...

Category: 106 presses / Crank Presses
Latest update: 08.01.2024 add to watchlist
approved
dealer
item-No.: 163104348
New in: 1981

used

check Seller: ENGINEX KOSICE
Location: Land-sk

add to watchlist

Crank press SMERAL LKT 250A

Category: 106 presses / Other Mechanical Presses
Latest update: 12.03.2024 add to watchlist
approved
dealer
item-No.: 163295451
New in: 2024

new

check Seller: Evelin of America Corporation
Location: Land-us

add to watchlist

SMERAL LZK 2500 Hot Forging press Fully refurbished in 2024* Capacity: 2500 Ton Speed: 65 SPM, continuous mode Ram/Slide Stroke: 320.00mm Ram/Slide Adjustment: 10.00mm Shut Height (Ram/Slide Down, Adjustment Up): 905.00mm Stroke of Upper Knockout: 50.00mm Stroke of Lower Knockout: 70.00mm Ram/Slide Width: 1320.00 mm Ram/Slide Height: 1100.00 mm Bed Width: 1340.00 mm Bed Depth: 1400.00 mm Power: 130kW Machine Length: 4055.00 mm Machine Width: 4000.00 mm Machine Height: 6710.00 mm Weight: 140000 kg Condition: like new * refurbishing report: 1. Mechanical part • Complete disassembly of the press. • Measurement and troubleshooting of all parts. • The main parts of the press are tested (without destruction) in order to identify any defects. Frame: The frame was inspected and non-destructive testing of the most loaded areas was carried out. Damage to the table  ...

Category: 106 presses
Latest update: 27.03.2024 add to watchlist
approved
dealer
item-No.: 162814253
New in: 1986

used

Location: Land-de

add to watchlist

Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: Smeral Trnava, single-column eccentric press type LEN 25 C -Pressure capacity: 25 tons -Clutch: pneumatic -Stroke: adjustable 8 - 85 mm -Stroke rate: 80-160 strokes/min, see photo of type plate -Table size: 435 x 560 mm -Table recess: Ø 90/180 mm -Projection: 220 mm -Punching fixture: Ø 40 mm -Insertion height 230 mm -Dimensions: press 1220/1160/H2100 mm / control cabinet 680/355/H970 mm -Total weight: 2569 kg

Category: 106 presses / Eccentric Presses
Latest update: 27.03.2024 add to watchlist
approved
dealer
item-No.: 163569679
New in: 1981

used

check Seller: Surplex GmbH
Location: Turnov - Dalim??ice Land-cz
Price: used machinery auction RESALE 1.450 € add to watchlist

Description: serial number: 0168 pressing force: 63 tons stroke: 105 mm table dimensions: 800 x 600 mm motor power: 7.5 kW Max. pressing force: 63 to, stroke: 105 mm, table surface area l x w : 800 x 600 mm, total power requirement: 7.5 kW, weight approx.: 6,200 kg, Approx. Onsite Dimension. (l x w x h): 1,400 x 1,850 x 2,550 mm

Category: 106 presses
Latest update: 27.11.2023 add to watchlist
approved
dealer
item-No.: 144714798
New in: 1973

used

check Seller: ERS MANAGEMENT LTD
Location: Land-ua

add to watchlist

-Max pressure at the end of stroke – 4000 ton -Press stroke – 400 mm -Number of stroke – 50 per minute -Max distance of stroke from the table – 1400 mm -Dimensions of slider: 1320 x 1320 mm -Bed dimensions: 1120 x 1600 mm -Bed movement by height – 20 mm -Max pressure of upper ejector – 20 t -Max stroke of upper ejector – 65 mm -Max pressure of lower ejector – 40t -Max stroke of lower ejector – 80 mm -Main motor power – 225 kW -Main motor speed – 730 rpm -Total width — 6280 mm -Total depth – 4885 mm -Total height – 8870 mm -Height over the bed – 7315 mm -Total net weight – 280 092 kg

Category: 107 sheet metal working
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163485398
New in: 2019

used

check Seller: GINDUMAC GmbH
Location: Land-sk

add to watchlist

This SMERAL LKT 250D Stamping machine was manufactured in the year 2019 in Czech Republic. It is equipped with a MINI control unit.

Category: 107 sheet metal working
Latest update: 28.03.2024 add to watchlist
item-No.: 163521888

used

Seller: Exapro
Location: Land-cz
Price: 5.740 € add to watchlist

The machine is in good technical condition. Max. sheet length: 2050 mm Max. sheet thickness: 4 mm By prior arrangement, the possibility of a tour in progress.

Category: 107 sheet metal working
Latest update: 28.03.2024 add to watchlist
item-No.: 163577494
New in: 1968

used

Seller: Exapro
Location: Land-cz

add to watchlist

The machine is in good technical condition. Max. length of bent material: 2050mm Max. strength of bent material: 4mm 7.5 - 2.2KW Weight: 4050kg By prior arrangement, the possibility of a tour in progress.

Category: 106 presses / Open Gap Eccentric Presses
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 157076729
New in: 1993

used

check Seller: Ambold Pressen GmbH
Location: 04626 Schmölln Land-de

add to watchlist

pressure: 160 t throat: 400 mm stroke: 20 - 160 mm table surface area: 1200 x 800 mm ram adjustment: 100 mm no. of strokes: 60 Hub/min ram surface: 860 x 520 mm total power requirement: 15 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 1,7 x 2,5 x 3,23 m The machine should b partially overhauled *new painting *new seals The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses / Open Gap Eccentric Presses
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 157076738
New in: 1977

used

check Seller: Ambold Pressen GmbH
Location: 04626 Schmölln Land-de

add to watchlist

pressure: 40 t throat: - mm stroke: 8 - 90 mm table size: 630 x 430 mm ram adjustment: 60 mm no. of strokes: max. 65 Hub/min total power requirement: kW weight of the machine ca.: 2480 kg dimensions of the machine ca.: m - tiltable - table mounting plate - mechan. Overload protection in plunger (break plate) - pneum. clutch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses
Latest update: 26.02.2024 add to watchlist
approved
dealer
item-No.: 162234716
New in: 1980

used

check Seller: ERS MANAGEMENT LTD
Location: Land-ua

add to watchlist

-Max pressure at the end of stroke – 4000 ton -Press stroke – 400 mm -Number of stroke – 50 per minute -Max distance of stroke from the table – 1400 mm -Dimensions of slider: 1320 x 1320 mm -Bed dimensions: 1120 x 1600 mm -Bed movement by height – 20 mm -Max pressure of upper ejector – 20 t -Max stroke of upper ejector – 65 mm -Max pressure of lower ejector – 40t -Max stroke of lower ejector – 80 mm -Main motor power – 225 kW -Main motor speed – 730 rpm -Total width — 6280 mm -Total depth – 4885 mm -Total height – 8870 mm -Height over the bed – 7315 mm -Total net weight – 280 092 kg

Category: 106 presses
Latest update: 27.03.2024 add to watchlist
approved
dealer
item-No.: 162424652

used

check Seller: ERS MANAGEMENT LTD
Location: Land-ua

add to watchlist

Capacity: 1 200 T, Total stroke: 500 mm, Stroke of main crank shaft: 318 mm, Stroke of mobile die: 215 mm, Stroke/min: 27, Bar diameter: 50-90 (150) mm, Max diameter of peace: 152mm, Max weight of piece: 5 kg, Main motor power: 75 KW, Area of machine : 6400 x 4420 mm, Hight of machine: 3830 mm, Weight: 128.0 T

Category: 107 sheet metal working
Latest update: 28.03.2024 add to watchlist
item-No.: 163521950
New in: 2019

used

Seller: Exapro
Location: Land-cz

add to watchlist

Type: Rolling machine UL 40 Parameters: Manufacturer: Šmeral Year of production / SO / GO: - / - / 2019 Location: Czech Republic Description: Semi-automatic machine for transverse hot wedge rolling UL 35 Šmeral redesigned to UL 40. Starting bar material: diameter 14-35mm, length 2500-4000mm. Diameter of rollers 600mm, width of rollers 400mm, max. Length of material feed 150mm.

Category: 106 presses / Eccentric Presses
Latest update: 27.03.2024 add to watchlist
approved
dealer
item-No.: 163610680
New in: 1962

used

check Seller: Surplex GmbH
Location: Elche - Alicante Land-es
Price: used machinery auction RESALE 1.800 € add to watchlist

Description: Type: Mechanical  ,Force: 200 tn Travel : 50 mm  ,Table dimensions: 800x800 mm ,  ,Distance between plates: 400 mm ,  ,Strokes: 60 m/min  , weight approx.: 9,100 kg, Approx. Onsite Dimension. (l x w x h): 1,500 x 1,550 x 3,450 mm

Category: 106 presses / Open Gap Eccentric Presses
Latest update: 08.01.2024 add to watchlist
approved
dealer
item-No.: 12792960
New in: 1972

used

check Seller: Kurt Steiger Werkzeugmaschinen GmbH
Location: Wiesbaden Land-de

add to watchlist

Force of pressure: 75 t projection: 300 mm table size: 620 x 800 mm Durchfalloch in the table: 225 x 325 mm table adjustment: 175 mm plunger surface: 180 x 475 mm slide adjustment: 80 mm stroke adjustment: 16-140 mm stroke rate: 90 / min drive motor: 380 V, 3 kW space: 1700 x 1200 x 2500 mm weight: 3300 kg

Category: 106 presses / Open Gap Eccentric Presses
Latest update: 08.01.2024 add to watchlist
approved
dealer
item-No.: 12792982

used

check Seller: Kurt Steiger Werkzeugmaschinen GmbH
Location: Wiesbaden Land-de

add to watchlist

Force of pressure: 40 t projection: 250 mm table size: 440 x 530 mm Durchfalloch in the table: 170 Ø mm table adjustment: 220 mm plunger surface: 200 x 280 mm slide adjustment: 60 mm stroke adjustment: 8-80 mm stroke rate: 100 / min drive motor: 380 V, 2.5 kW space: 950 x 1450 x 2050 mm weight: 2400 kg

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
RESALE used machinery 25 years online