british flag
Resale Logo

Screw used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information used machine tools  INTER-PLAST Andrzej Bodziachowski  http://www.inter-plast.com.pl 
banner logo
start page > keywords Screw > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
122196718 301

ARBURG 320M 750-210 for sale
Injection molding machines


Injection moulding machine ARBURG 320 M 750 â 210 Machine data: Year of construction: 1990 Hours of operation: approx. 78.300 Cylinder/snail Ã?: 30 mm high wear strength 2 core cable with core it's cont ...
used machine
 
Injection moulding machine ARBURG 320 M 750 â 210
Machine data:
Year of construction: 1990
Hours of operation: approx. 78.300
Cylinder/snail Ã?: 30 mm high wear strength
2 core cable with core it's control to delay of the screw-in signal when screwing the threaded cores.
2015 was performed the last audit of the hydraulic lines and hoses still replaced.
The machine is still fully functional and is still daily in use.
Machine is sold as second-hand machine with traces of use, without guarantee or warranty.
The machine is free from February 2018!
1990
Price  
    request
122196712 109

IMPIANTI INDUSTRIALI warman for sale


-industrial systems technical manuals for: Gearboxes, mills and cart feeders, vibrating screens, Bars etc. -spare parts stock: Falcons for yard, augers Wam, Electric Vibrators different powers, single-screw, single deck ...

 
-industrial systems technical manuals for: Gearboxes, mills and cart feeders, vibrating screens, Bars etc.
-spare parts stock: Falcons for yard, augers Wam, Electric Vibrators different powers, single-screw, single deck vibrating dryer, pump Pump Warman more Bellin Motovariator Spaggiari, motor with coupling, Electric Vibrators oils, single deck vibrating dryer with Hopper
-different resolutions for different size Motors, motors, Flange sizes
-stands (upright – flanged): flanged housing various sizes, pillow block unit different resolutions
-rubber strips of various lengths and sizes, iron Cups and rubber
-scrap ready oven: Hammermill, Crusher Mem Br 450
For sale exclusively on 16.01.2018 15 hours in Fiorano al Serio
For more information contact us at 0307751645
 
24,500 €  
  IT   request
122168581 102

KNUTH BASIC 150 for sale
Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)


Turning length approx. 400 mm, tip height approx. 150 mm, hollow spindle diameter 45 mm, coolant system, 1,1 kW, with 3 - jaw Chuck, diameter 160 mm, up to 2245 RPM
used machine
 
Turning length approx. 400 mm, tip height approx. 150 mm, hollow spindle diameter 45 mm, coolant system, 1,1 kW, with 3 - jaw Chuck, diameter 160 mm, up to 2245 RPM
1991
used machinery auction RESALE 600 €  
    request
122168526 505

VENTI OELDE for sale
Recycling units


consisting of: Sprühwäscher type remote access 800, flow 49,000 cubic meters / hour, capacity 74 kW, water circulation 100 cubic metres per hour; Hochleistungszykolon type HLZ-TS 1800, volume flow 40,000 cubic meters / ...
used machine
 
consisting of: Sprühwäscher type remote access 800, flow 49,000 cubic meters / hour, capacity 74 kW, water circulation 100 cubic metres per hour; Hochleistungszykolon type HLZ-TS 1800, volume flow 40,000 cubic meters / hour, diameter 1800 mm, thickness of the cyclone 10 mm â rotary valve type ZS 80-500 / 627, capacity 557 cubic meters / hour power 5.5 kW, inlet length inlet width 996 mm 496 mm, height 1,150 mm, degree of filling 55%; Support stand weight 11,500 kg, execution in screw design made of profile steel; Vacuum pipeline length 10000 mm with a deflection, thickness 6 mm â exhaust pipe length 17,000 mm, sheet thickness 4 mm; high-performance centrifugal fan type HRV 63S-900 / RG, flow 49,000 cubic meters / hour, gas temperature 20 ° C, fan speed 1,800 rpm,. Power 110 kW; Electric motor upper surface cooled make VEM, performance 132 kW; Blue smoke reduction system; Windsichter type WS 350, flow 69,000 cubic meters / hour, throughput of 35,000 kg / h, height 4.535 mm, 1000 mm x 800 mm; task sluice type AGS 800 x 800, length 1540 mm, width: 1,495 mm, height 900 mm, power 2,2 kW; Support structure for windsichter, weight 17,000 kg; High-performance cyclone type HLZ-TW-2360, flow 69,000 cubic metres / h, nominal diameter 2,360 mm, total height 11478 mm, weight 10.690 kg; Rotary valve type ZS 80-500/627, capacity 557 cubic meters / hour, filling ratio 55%, engine power 5.5 kW, inlet length 996 mm, inlet width 496 mm, height 1150 mm; high-performance centrifugal fan type HRV 63S-900 / K, flow 69,000 cubic meters / hour, gas temperature 20 ° C, fan speed 1.485 rpm, power 84.5 kW; Electric motor upper surface cooled make VEM, power 90 kW; Vacuum pipeline length 28.000 mm with four diversion; Trough belt conveyor length 16100 mm, width 1000 mm, power 11 kW; Vibrating chute size 5000 mm x 1200 mm, Fördermasse 40000 kg/HR; Parent band magnetic separator type OVBAB 80/60 N, length 2275 mm, height 520 mm, width 800 mm, capacity 3.2 kW, belt speed 1.3 m/s; Trough belt conveyor length 13500 mm, width 800 mm, power 5,5 kW; Trough belt conveyor length 12000 mm, width 800 mm, power 5,5 kW; various pre-separator; Control Chair with controls; Control cabin with control unit and control software; Medium voltage switch cabinet; Video system; Control and switch cabinet systems in magazine containers
2013
used machinery auction RESALE Price  
    request
122168046 102

WEILER Commodor B for sale
Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)


gebr. L + Z lathe make hamlet Model can B. No.: 2046 built 1988 Tip height 180 mm Top width 1000 mm Turning Ã? bed 380 mm over cross slide 190 mm Turning length covered l + Z spindle 900 mm Bed w ...
used machine
 
gebr. L + Z lathe make hamlet
Model can B. No.: 2046 built 1988

Tip height 180 mm
Top width 1000 mm
Turning Ã?
bed 380 mm
over cross slide 190 mm
Turning length covered l + Z spindle 900 mm
Bed width 305 mm
Spindle bore 56 mm
Tailstock Quill MK 4
18 spindle speeds 25-2000 RPM
200 feeds
longitudinal 0.022 - 0.8 mm / Rev
Plan 0.011 - 0.4 mm / Rev
Engine 2/4 kW
External dimensions:
Width 2300 mm
1100 mm deep
Height 1400 mm
Weight approx. 1500 kg
With: 4 - jaw Chuck Röhm Ã? 200 mm
3 - jaw Chuck Röhm Ã? 200 mm
Multifix carrier head Gr. B with inserts
Coolant system engine light
Mitlo. Lathe
Cover control and spindle
Chuck guard

The engine comes from a vocational training centre and is in very good condition.

1988
Price  
    request
122168040 102

WEILER Commodor B for sale
Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)


gebr. L + Z lathe make hamlet Model can B. No.: 2461 built 1988 Tip height 180 mm Top width 1000 mm Rotating Ã? bed 380 mm over cross slide 190 mm Turning length covered l + Z spindle 900 mm Bed wi ...
used machine
 
gebr. L + Z lathe make hamlet
Model can B. No.: 2461 built 1988

Tip height 180 mm
Top width 1000 mm
Rotating Ã? bed 380 mm
over cross slide 190 mm
Turning length covered l + Z spindle 900 mm
Bed width 305 mm
Spindle bore 56 mm
Tailstock Quill MK 4
18 spindle speeds 25-2000 RPM
200 feeds along 0.022 - 0.8 mm / Rev
Plan 0.011 - 0.4 mm / Rev
Engine 2/4 kW
External dimensions:
Width 2300 mm
1100 mm deep
Height 1600 mm
Weight approx. 1500 kg
With:
3-axis digital display HEIDENHAIN
4 - jaw Chuck Röhm Ã? 200 mm
3 - jaw Chuck Röhm Ã? 200 mm
Multifix carrier head Gr. B with inserts
Coolant system engine light
Mitlo. Lathe
Cover control and spindle
Chuck guard

The engine comes from a vocational training centre and is in very good condition.

1988
Price  
    request
122168014 102

WEILER Commodor 230 - Teilueberholt for sale
Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)


L + Z LATHE HAMLET CAN 230 WITHOUT - 04-03-208 Shipping time: Immediately Number: 04-03-208 Manufacturer: Weiler Type: Can 230 without . MACHINE DATA Year of construction: approx. 1990 L x W x H: approx ...
used machine
 
L + Z LATHE HAMLET CAN 230 WITHOUT - 04-03-208

Shipping time: Immediately

Number: 04-03-208

Manufacturer: Weiler
Type: Can 230 without .

MACHINE DATA
Year of construction: approx. 1990
L x W x H: approx. 2700 x 1200 x 1800 mm
Weight: approx. 1600 kg

Very good condition - without

TECHNICAL DATA
Digital display: 3 - axes - digital display new

Dimensions:
Maximum turning diameter over bed: approx. Ã? 475 mm
Maximum turning diameter over support: approx. Ã? 270 mm
Maximum turning length: approx. 1000 mm
Bar passage: approx. Ã? 56 mm

Spindle:
Speed range: approx. 13-2000 RPM
Spindle nose: A 2 - 6
Power: approx. 7,5 kW

Automatic longitudinal & plan vorschuebe:
Feed range: approximately 0.014 1.00 mm / Rev

Suitable for threads:
-metric 0.30 mm-10 mm
"- 80-2 3/4 inch Gg /"
-Diametral - Pitch thread 80-5.5 DP
-Module 0.2-5

Tailstock: MK 4

ACCESSORIES
â?¢ 3 - bake - chuck Ã? 200 mm new
â?¢ Quick change Toolpost + 3 inserts
â?¢ Electric Chuck guard
â?¢ Work light
â?¢ Coolant system
â?¢ Complete machine documentation
â?¢ EMERGENCY
â?¢ Drill Chuck for tailstock new
Tip â?¢ ongoing with for live new
â?¢ Various wrenches
â?¢ Machine feet

Other accessories on request
Price and other specifications on request
1990
Price  
    request
122167981 102

TOS SKQ 20 CNC for sale
Vertikal Turning Machines (Lathes)


Clamping plate diameter mm 2000 Max. working height mm 1250 Max. workpiece weight kg 10000 Stroke mm 1000 Machine dimensions: length mm 3800 width mm 3500 height mm 5500 Machine in very good condition. General  ...
used machine
 
Clamping plate diameter mm 2000
Max. working height mm 1250
Max. workpiece weight kg 10000
Stroke mm 1000
Machine dimensions:
length mm 3800
width mm 3500
height mm 5500

Machine in very good condition. General overhoul in 1999. Control system MEFI CNC 846. In 2013 new ball screws and bearings, new table bearing. Machine has driving tools. Machine has 4-jaw chuck.
1999
Price  
  CZ   request
122167980 102

TOS SKIQ 12 B CNC for sale
Vertikal Turning Machines (Lathes)


Diameter 1250mm, Revolutions 2,5-250 rpm, Max. diameter of workpiece 1500mm, Max. height of workpiece 1335mm, Max. weight of workpiece 12000kg, Max. motor output 40kW, Machine dimensions 5350x5240x5520mm, Machine  ...
used machine
 
Diameter 1250mm,
Revolutions 2,5-250 rpm,
Max. diameter of workpiece 1500mm,
Max. height of workpiece 1335mm,
Max. weight of workpiece 12000kg,
Max. motor output 40kW,
Machine dimensions 5350x5240x5520mm,
Machine weight 27200kg,

Machine in very good condition. Control system MEFI CNC 846. In 2013 new bearing in table, new ball screws. Machine has driving tools and adjustability of table - C-axe. Machine has 4-jaw chuck with hydraulic clamping.
1990
Price  
  CZ   request
122136208 1300

KEASER DSD 241 for sale
Rotary screw air compressor


Mod: DSD 241 YOM: 2006 Max working pressure: 10 bar FAD at working pressure: 20,7 m3/min Rated motor power: 132 kW Max working pressure: 7,5/10/13 bar FAD at working pressure: 24/20,7/15,9 m3/mm Max  ...
used machine
 
Mod: DSD 241
YOM: 2006
Max working pressure: 10 bar
FAD at working pressure: 20,7 m3/min
Rated motor power: 132 kW

Max working pressure: 7,5/10/13 bar
FAD at working pressure: 24/20,7/15,9 m3/mm
Max working pressure bar: 8/11,5/15
Rated motor power: 132 kW
Rated voltage/Phases/Frequency: 400V/3/50Hz
Control Voltage/Phases/Frequency: 230V/1/50Hz
Rated current: 270 A
Electrical diagram: SDSD-02010.00
Dimensions: 2225x1962x1885 mm
Weight: 3400 kg


DRYER:
Refrigerant max allow pressure:
LP side: 19,0 Bar
HP side: 27,5 Bar
Max working pressure: 12,0 Bar
Max working temperature: 65 C
Voltage/Phases/Frequency: 400/3/50
Max absorption: 12,0 A
Installed power: 6, 90 KW
Protection rating: IP54
Refrigerant: R407C
Refrigerant charge: 6.800 Kg
Weight: 318 Kg
2010
Price  
  ES   request
122136203 101

SKODA Skoda W 160 H/NR CNC for sale


Skoda W 160 H/NR CNC Travel x= 14.500mm (bed is for the travel 18,500mm) Travel Y= 3.150mm Travel Z= 1.600mm Travel W= 1.250mm Spindle diameter 160mm Machine with ball screw Many accessories available: CNC contro ...
used machine
 
Skoda W 160 H/NR CNC
Travel x= 14.500mm (bed is for the travel 18,500mm)
Travel Y= 3.150mm
Travel Z= 1.600mm
Travel W= 1.250mm
Spindle diameter 160mm
Machine with ball screw
Many accessories available:
CNC control Siemens SINUMERIC 850
Rotary table ISO 16 2.200 x 2.200mm, capacity 16 ton included
Chip conweyor : 19.000 mm + 12.000 mm
Floor plates
1990
Price  
  CZ   request
122126001 301

ENGEL ES 4400 for sale
Injection molding machines


Injection unit Screw diameter: 80 mm Spec. Injection pressure: 1900 bar Maximum stroke volume: 1960 cc Maximum shot weight: 1765 g Heating capacity: 47.5 kW Number of heating zones, incl. Nozzle: 6 Clamping unit ...
used machine
 
Injection unit
Screw diameter: 80 mm
Spec. Injection pressure: 1900 bar
Maximum stroke volume: 1960 cc
Maximum shot weight: 1765 g
Heating capacity: 47.5 kW
Number of heating zones, incl. Nozzle: 6

Clamping unit:
Clamping force: 7500 kN
Locking force: 8250 kN
Size of the clamping plates:-total size: 1500 x 1390 mm
-between the bars horizontal: 1025 mm
-between the vertical Holmem: 925 mm
Mould installation height min/max: 400/920 mm
Opening stroke: 900 mm
Ejector force max: 110 kN
Ejector stroke: 250 mm
1992
Price  
    request
122125443 301

KRAUSS MAFFEI KM 800 - 5700 CM for sale
Injection molding machines


Krauss Maffei KM 800 - 5700 MC Right of error, no subject to prior! Offer details Stock no. 10156 Manufacturer Krauss Maffei Type of machine KM 800 - 5700 MC Year 1997 Location Eschweiler - Germany Controlvers ...

 
Krauss Maffei KM 800 - 5700 MC

Right of error, no subject to prior!
Offer details
Stock no. 10156
Manufacturer Krauss Maffei
Type of machine KM 800 - 5700 MC
Year 1997
Location Eschweiler - Germany
Controlversion MC3-F
Screentext German

Clamping unit
Clamping force 8000 kN
Mould opening force, max. 356 kN
Travel force movable platen opening 106 kN
Travel force movable platen closing 82 kN
Size of mould platens (h x v) 1610 x 1250 mm
Distance between tie bars (h x v) 1120 x 1000 mm
Mould opening stroke 1400 mm
Mould height min 600 mm
Mould height max 1100 mm
Max daylight 2000 mm
Hydraulic ejector - stroke 250 mm
Ejector force 226 kN

Injection unit
Screw diameter 95 mm
Ls/D ratio 22
Injection pressure 1931 bar
Stroke volume 2956 ccm
Shot weight 2690 g
Screw speed 165 1/min
Plasticising rate max 142 g/s
Nozzle pressure 246 kN

Electric and Hydraulic Equipment
Nominal capacity of pump motor 110 kW
Installed heating capacity 59 kW
Adjustable barrel heating zones 7
Dry cycle number 600 1/h
Reservoir capacity 3450 ltr.

Dimensions and weights
Dimensions of the machine ca. 12,0 x 2,90 x 2,55 m
Total machine weight 50 kg
Dimension of injection unit 6,20 x 2,80 x 2,55 m
Injection unit weight 18000 kg
Dimension of clamping unit 5,30 x 2,90 x 2,50 m
Weight of calmping unit 32000 kg

Accessories
- Anti vibration pads

Additional information
- 5 x core pulls
- 20 x hot runner controller
- Robot interface as per Euromap 12
 
Price  
    request
122125254 1300

KAESER AS 36 / SK 26 / TD 51 for sale
Air screw compressor


Bankruptcy recovery of complete sausage factory, about 120 positions: Int: 104 Screw compressor Kaeser AS 36 (52.222 h) Kaeser SK 26 (rest unknown) Air dryer TD 51 (built in 2005) Oil / Wassertrenner Kaeser gal ...

 
Bankruptcy recovery of complete sausage factory, about 120 positions:

Int: 104

Screw compressor Kaeser AS 36 (52.222 h)
Kaeser SK 26 (rest unknown)
Air dryer TD 51 (built in 2005)
Oil / Wassertrenner Kaeser
galvanized air boiler Kaeser 2,000 litres (built in 2001)

Price 94447 Plattling plus 19% VAT from site
 
5,500 €  
    request
122124975 102

ANGELINI AVM MAS 165 S for sale
Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)


gebr. L + Z lathe make AVM ANGELINI Model MAS 165 S. No.: 2184 year 1994 Tip height 165 mm Top width 800 mm Turning diameter: bed 330 mm support 200 mm Spindle bore 38 mm 16 spindle speeds 35-2480 UpM  ...
used machine
 
gebr. L + Z lathe make AVM ANGELINI
Model MAS 165 S. No.: 2184 year 1994

Tip height 165 mm
Top width 800 mm
Turning diameter:
bed 330 mm
support 200 mm
Spindle bore 38 mm
16 spindle speeds 35-2480 UpM
Motor 3 HP
External dimensions:
Length 1700 mm
Width 700 mm
Height 1300 mm
Weight approx. 720 kg
With: quick change Toolpost
Lynette running with
Change gears
3 - jaw Chuck 160 mm Ã?

1994
Price  
    request
122124945 105

MEBA Eco 335 DGA for sale


Type: Eco 335 DGA Machine no. 6723 Year of construction: 2002 Design: CNC twin pillars band saw machine with automatic adjustment of miter CNC control: Siemens PC 670 Cutting area 90°: Round d 335mm / flat 500 ...
used machine
 
Type: Eco 335 DGA
Machine no. 6723
Year of construction: 2002
Design: CNC twin pillars band saw machine with automatic adjustment of miter
CNC control: Siemens PC 670

Cutting area
90°: Round d 335mm / flat 500x335mm
Miter right 45° round D. 330mm / flat 320x335mm
Miter right 30° round D. 180mm / flat 170x335mm
Miter left 45° round D. 305mm / flat 305x335mm

Bundle voltage clamping range: 0-300 mm / height 5-300 mm
Feed rate: Easy up to 600 mm / multiple 0-9999 mm
The remaining piece length: Manual 70 mm / 300 mm
Cutting speed: 15-150 m / min by means of frequency converter
Cut printing: infinitely variable hydraulic
Speed: 0 - 300 mm/min - infinitely variable
Band saw blade dimensions: 4400 x 34 x 1.1 mm

Saw band tension: using a torque wrench
Machine weight: 2000kg
Machine dimension: Lxwxh 2680x2350x1900mm
Working height: 750 mm with mounting elements about 800 mm

Accessories:
Minimal lubrication system
6m feed roller
-2-part 1 x 4m and 1 m x 2m / width 600 mm, diameter 90 mm / 11 wheels
-3 x vertical roller D. 65 mm height 340 mm - 6 x material supports, that on the feed roller conveyor are screwed
5m measuring base
-Length 5 m with Handwheel and digital display
-Roll width 600 mm / d 90 mm / 12 rolls
2002
Price  
    request
122069965 301

BOY 50 M for sale
Injection molding machines


Built in 1988 Clamping force: 50 tons Screw diameter: 38 mm good condition!
used machine
 
Built in 1988
Clamping force: 50 tons
Screw diameter: 38 mm
good condition!
1988
Price  
    request
122036864 1300  

MAUGUIERE MSV RS190 for sale
Spr?zarka ?rubowa


Screw compressor Mauguiere MAV RS190 15 kW Technical data: Power: 15kW Performance: 2.43 m3/min Pressure: 10 bar Year of production: 2004 r air tank: 500 l integrated dryer Condition: ef ...
used machine
 
Screw compressor Mauguiere MAV RS190 15 kW

Technical data:

Power: 15kW
Performance: 2.43 m3/min
Pressure: 10 bar
Year of production: 2004 r
air tank: 500 l
integrated dryer

Condition: efficient
Warranty: boot
2004
Price  
  PL   request
122020903 301  

BATTENFELD Plus 350/75 for sale
Injection molding machines


Machine specification Year: 2000 Control unit: Unilog 1020 Injection Unit: .../75 Screw diameter: 30 mm Injection pressure: 1094 bar Injection volume: 70,6 ccm Shot capacity: 64,2 g Clamping Unit: 350/...  ...
used machine
 
Machine specification

Year: 2000
Control unit: Unilog 1020

Injection Unit: .../75
Screw diameter: 30 mm
Injection pressure: 1094 bar
Injection volume: 70,6 ccm
Shot capacity: 64,2 g

Clamping Unit: 350/...
Clamping force: 35 t
Platen size: 470 x 280 mm
Distance between tie bars: 270 x 270 mm
Mould height: 150... mm
Opening storke: 200 mm
Max.Daylight: 450 mm
Ejector stroke: 100 mm
Drive power of the hydraulic pump: 7,5 kW
Cylinder heating power: 2,7 kW

General information:
Delivery time: Now
Machine dimensions(m) LxWxH: 2,3 x 0,9 x 1,5 m
Weight: 1000 kg
2000
Price  
    request
122020899 301  

BATTENFELD TM 500/210 for sale
Injection molding machines


Machinespecification Year: 2000 Control unit: Unilog B2 Injection Unit: .../210 Screw diameter: 30 mm Injection pressure: 2042 bar Injection volume: 106 ccm Shot capacity: 95 g Clamping Unit: 500/... Clamp ...
used machine
 
Machinespecification

Year: 2000
Control unit: Unilog B2

Injection Unit: .../210
Screw diameter: 30 mm
Injection pressure: 2042 bar
Injection volume: 106 ccm
Shot capacity: 95 g

Clamping Unit: 500/...
Clamping force: 50 t
Platen size: 490 x 490 mm
Distance between tie bars: 320 x 320 mm
Mould height: 150... mm
Opening storke: 250 mm
Max.Daylight: 600 mm
Ejector stroke: 100 mm
Cylinder heating power: 7,7 kW

General information:
Delivery time: Now
Machine dimensions(m) LxWxH: 3,1 x 0,95 x 1,5 m
Weight: 2500 kg

Equipment:
- Interface as per Euromap 12
- 1 x Core pull
- 1 x Pneumatic valve
2000
Price  
    request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Find used machinery dealers in your country