used SCHWARZ Compressors

Compressor black RS 1015 type Rota Nova NK 60 5.5-11 kW / 7.5-15 HP 1.5 m3 / min Ssszy0 L x W x H: 110 x 80 x 100 cm Weight 450 kg Built in 1982 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Max pipe Ø: 60,3 x 3.2 mm maximum bending angle: 180 ° PIN length: 3000 mm Electr. Supply: 380 V, 8.6 kW space: 2400 x 5700 x 1500 mm weight: approx. 2500 kg

Temperature range: -40C to +50C interior dimensions (usable space) A approx. 500 mm, width approx. 400 mm, depth approx. 800 mm

Technical data: -Bending performance mandrel bending -maximum Rohrdrm at 45 kg / mm² � 60.3 x 3.2 mm -min tube diameter 20 mm -maximum bending angle 180 ° -Bending direction left + right -Modulus 7,8 cm³ -min. bending radius mid-tube 40 mm -maximum bending radius mid pipe 200 mm -Lift length 5000 mm -maximum bending speed infinitely adjustable up to 3 U/min -Drive 400 V / 4 kW -Space requirement approx. B 1400 x H 1500 X 8000 mm -Weight approx. 1200 kg -Automatic. Bending angle before eligibility - hand positioning adjustment, creep speed control

Mandrel bender schwarze wirtz Year of production 1996 / in 2011 the machine was renovated. Very good condition. Length about 10m Weight about 7t

loading capacity: 200 kg dropping height: 1,000 mm

tube diameter max.: 38 mm wall strength: 2 mm bar material dia. min.: 10 mm bending radius min.: 35 mm bending radius max.: 150 mm pull up length of tube: 4500 mm bending angle max.: 180 ° accuracy of bending angle: ± 0,2 ° total power requirement: 7,5 kW weight of the machine ca.: 1,2 t - with 8-pos. bending angle pre-selection - crawler gear control - positioning device by hand - tube twist device Following bending tools are with the machine: - ø 10 mm, radius 27,5 mm - ø 12 mm, radius 35 mm - ø 12 mm, radius 56 mm - ø 15 mm, radius 35 mm - ø 15 mm, radius 57,5 mm - ø 18 mm, radius 35 mm - ø 18 mm, radius 59 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 300 mm material thickness: 3 mm cross cut: weight of the machine ca.: 0,12 t dimensions of the machine ca.: 0,5, 1, 1 m Coil Shredder The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 25 mm wall strength: 2 mm bending radius min.: 10 mm Control: bending radius max.: 75 mm total power requirement: 11 kW weight of the machine ca.: 1,45 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Electro-Hydraulic Bending Machine Fabr. SCHWARZE-WIRTZ type Perfect WE 40 Dmachine -No: 85500 year 1985Max. Bending capacity: 25 x 2 mmPipe diameter min.: 10 mmMax. Bending radius up to center of pipe: 100 mmminute Bending radius up to center of pipe: 25 mmBending angle max.: 180°Bending direction: LeftMax. Bending speed forfeed stepless: 19 rpm.Return constant: 19 rpm.Drive power: 7.5 kWWeight approx.: 700 kgExternal dimensions L x W x H: 2200 x 1100 x 1100 mmWith- Hydraulic slide rail feed- Creeper control- Footswitch- without toolsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Glass silk nickel braid, cable braid -Type: 1.5 mm² -wire: 1 -Length: 100 m -Weight: 2 kg

Lubrication pump, gear pump aggragat SAXONIA ASL 0.1 pn: 1.6 MPa Q: 0.1 l/min engine: 0.12 kW 220 / 380 V Dimensions: 270 x 130 x 160 mm

Central lubrication, central lubrication unit, gear pump unit with tank SAXONIA 6.3 L/1 - 0.25 A pn: 1.6 MPa Tank capacity approx. 6.3 l Engine: 60 W 220 / 380 V with approx. 2 m pressure hose and approx. 10 m connection cable ! used, tested ! Dimensions: 430 x 500 x 470 mm

Lubrication pump with motor SAXONIA, VEM, ELMO ZE 6.3 L Immersion depth: 90 mm pump diameter: Ø 50 mm Flange diameter: Ø 95 mm pn: 1,6 MPa (16 bar) Engine: VEM 1260.1/1 60 W 1400 rpm 220 / 380 V IP 44 Replacement pump for SAXONIA central lubrication devices !, among others used, tested ! Dimensions: 250 x 110 x 125 mm

Central lubrication, central lubrication unit, gear pump unit with tank SAXONIA PZ 0.1 - 6.3 L pn: 1,6 MPa Q 0.1 l/min tank capacity approx. 6.3 l Engine: VEM KMR 56 K 4 0.12 kW 1360 rpm 220 / 380 V 3AC Dimensions: 420 x 180 x 400 mm

Lubrication pump with motor SAXONIA, VEM, ELMO APZ 2,5 B ( APZ2,5B ) Volumetric flow: 0.25 l/min Nominal pressure: 1.6 MPa (16 bar) Motor: VEM 1160.1/1 60 W 1400 rpm 220 / 380 V 3AC IP 44 used ! tested ! Dimensions: 250 x 110 x 125 mm

Central lubrication, lubrication pump with tank SAXONIA ZE 6.3 L / 0.25 ( ZE3.3L/0.25 ) pn: 1,6 MPa ( 16 bar ) nominal flow rate: 0.25 l/min tank capacity: 6.3 l Engine: ELMO Typ 1260.1/1 60 W 1400 rpm 220 / 380 V 3AC used, tested ! Dimensions: 420 x 180 x 390 mm

float switch, level switch, level monitor, level switch SAXONIA SCHWARZENBERG 24 - 250 V 2 switching points immersion depth: 170 mm flange Ø 60 mm float: plastic, colour: red level switch for central lubrication !; New ! Dimensions: 220 x 110 x 90 mm

float switch, level switch, level monitor, level switch SAXONIA SCHWARZENBERG 24 - 250 V 2 switching points immersion depth: 170 mm flange Ø 60 mm float: plastic, colour: white level switch for central lubrication ! New ! Dimensions: 220 x 110 x 90 mm

float switch, level switch, level monitor, level switch SAXONIA SCHWARZENBERG 24 - 250 V 2 switching points Immersion depth: 170 mm flange Ø 60 mm float: brass level switch for central lubrication ! New ! Dimensions: 220 x 110 x 90 mm

float switch, level switch, level monitor, level switch SAXONIA SCHWARZENBERG 24 - 250 V 1 switching point Immersion depth: 110 mm flange Ø 60 mm float: plastic, colour: red level switch for central lubrication !; New ! Dimensions: 170 x 110 x 90 mm

float switch, level switch, level monitor, level switch SAXONIA SCHWARZENBERG 24 - 250 V 1 switching point immersion depth: 110 mm flange Ø 60 mm float: plastic, colour: white level switch for central lubrication ! New ! Dimensions: 170 x 110 x 90 mm

float switch, level switch, level monitor, level switch SAXONIA SCHWARZENBERG Immersion depth: 260 mm 2 switching points flange Ø 50 mm float: plastic, colour: red level switch for central lubrication !; New ! Dimensions: 310 x 70 x 50 mm

float switch, level switch, level monitor, level switch SAXONIA SCHWARZENBERG Immersion depth: 260 mm 2 switching points flange Ø 50 mm float: plastic, colour: white level switch for central lubrication !; New ! Dimensions: 310 x 70 x 50 mm

float switch, level switch, level monitor, level switch SAXONIA SCHWARZENBERG Immersion depth: 260 mm 2 switching points flange Ø 50 mm float: brass level switch for central lubrication !; New ! Dimensions: 310 x 70 x 50 mm