We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Capacity: 50 ton Projection: 225 mm Stroke: 320 p/min Large table: 500 x 800 mm
used
very fast Eccentric press, make SCHULER , tested , electrically connected Type PDv 25/200 Masch.-No. 70/32.0610/9 Technical data: Power 25 to Number of strokes approx. 180 /min Extension 200 mm Impact stroke 8 - 80 mm Shock sift creation approx. 60 mm Table size approx. 570 x 410 mm Installation height approx. 310 mm (measured with mounted clamping plate) Width x Depth approx. 1.1 x 1.35 m plus control cabinet Height approx. 2.15 m Engine power 3 kW Weight estimated approx. 1.5 to
used
Specifications: Capacity 63 tons Stroke rate 140 h/min Projection 250 mm Plunger stroke 8-100 mm Table , WxD approx. 700 x 480 mm Installation height approx. 400 mm
used
Specifications: Capacity 63 tons 2 strokes 105 rpm and 140 rpm large projection 450 mm ! Plunger stroke 8-100 mm Plunger adjustment approx. 70 mm Table , WxD approx. 700 x 780 mm Plunger, W x D approx. 450 x 280 mm
used
Compressive force: 63 t Projection: 250 mm Table size: 500 x 710 mm Diarrhoea hole in the table: approx. 250 mm Plunger area: 280 x 450 mm Plunger adjustment: approx. 63 mm Stroke adjustment: approx. 8 - 100 mm Stroke rate: approx. 140 rpm Drive motor: 380 V, approx. 5 kW Dimensions: 1600 x 1500 x 2500 mm Weight: approx. 3500 kg
used
Article number: 13-20-001 Manufacturer: Schuler Good general condition Machine workshop-tested Shipping time: All rights reserved. Year of construction: ca.1965 L x W x H: approx. 1200x1800x2400 Weight: approx. 2500kg Compressive force: approx. 25000kg Stroke of ram: approx. 8-59mm Max. installation height: approx. 550-1150mm Power requirement: approx. 1.5 hp Other accessories on request Price and other technical data on request
used
Hydraulic Press SCHULER HYDRAP 315 Manufacturer: SCHULER Model: HPDZb 3150-3000/1300 New in: 2001 Condition: Very good Technical details Press capacity: 315 T Table dimensions: 3 000 x 1 300 mm Min. die stamping dimensions: 2 000 x 866 mm Slide stroke: 800 mm Max. shut height: 1 300 mm Number of strokes per min (regulated): 13-46 Cusion capacity: 160 T Cusion stroke: 200 mm
used
Schuler PE4s 50/800 High Speed Press Manufacturer: Schuler Type: PE4s 50/800 High-speed press 61/21 600/3 Pressing force: 50 t Projection: 800 mm Stroke rate /min: 125-300 Plunger stroke: 40 mm Kohler unwinding reel 500.1 M We sell a large number of paternosters. The devices are in operation until 30.06.2021. After the purchase, there are also the documents for it From 01.07.21 the devices are ready for collection. Dismantling and transport by the buyer. Location is Hildesheim The dismantling, loading, as well as transport can alternatively be offered by us. In addition to about 50 paternosters, countless other machines are available. After purchase, the amount is due within 7 working days. Please also note our other offers. Have fun browsing and buying.
used
Condition: very good Control system: Siemens Technical details : Machine type: SH-200-2.7 x 1.7 Fabrication No.: P/100010 Year: 2005 TOTAL PRESS WEIGHT: 37300 kg Nominal force: 2000 kN Stroke length max.: 900 mm Installation height: 1400 mm Closing speed: 400 mm/s Working speed max.: 84 mm/s Working speed at nominal force: 30 mm/s Tool footprint max.: 2700 x 1500 mm Tool footprint min.: At nominal force: 1600 x 1100 mm Tool height min.: 500 mm Total tool weight max.: 15 000 kg Tool upper part weight max. : 7500 kg Permitted External load : left-right 30 kNm Permitted Except Load : front-rear 15kNm Installed capacity: 87 kW Rated current: 155 A Tension: 400 V Frequency: 50 Hz Hydraulic operating pressure: 289 bar Total amount of oil: 1500 l Type of oil: HLP 46, DIN 51524
used
YOM: 5.1987 / 2003 - the press was generally renovated by the manufacturer Schuler, along with the replacement of electrics, cables and controls for Siemens Condition: Very good Technical details: Pressing force: 5000 kN, 500 tone Table dimensions: 1500 x 1400 mm Distance from Clamping surface to ram: 1250 mm Distance from the clamping table to the hold-down device min.405 mm, max.605 mm Clamping surface thickness: 335 mm Number of flutes, dimensions: H12 DIN 650, 36 mm Ram size Stroke:: 500 mm Hold-down size Stroke: 200 mm Press height / weight: 5800 mm / 45 tone
used
Key data: 8 t, 420 mm, 120 mm
Machine Type: Hand Spindle Press Manufacturer: SCHULER Condition: good Offer Type: Used Machine Specifications: Compressive force: 8 t Projection: 120 mm Table: 420 x 235 mm Installation height: 175 mm Weight: 250 kg The machine is in good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.
used
Capacity: 80 ton Throat depth: 345 mm Ram stroke: 8 - 120 mm Slide adjustment: 71 mm Shut height (stroke down, adjustment up): 230 mm Height of the bolster plate: 140 mm Table surface area : 875 x 695 mm Slide area: 700 x 355 mm Distance between the columns: 450 mm Number of strokes: 120 s.p.m. Weight of machine approx.: 6,5 ton
used
Capacity: 80 ton Throat depth: 345 mm Ram stroke: 8 - 120 mm Slide adjustment: 71 mm Shut height (stroke down, adjustment up): 230 mm Height of the bolster plate: 140 mm Table surface area : 875 x 695 mm Slide area: 700 x 355 mm Distance between the columns: 450 mm Number of strokes: 120 s.p.m. Weight of machine approx.: 6,5 ton
used
Including separator, without documentation.
used
pressure: 63 t throat: 315 mm stroke: 8-100 mm no. of strokes: 140 Hub/min ram - range of adjustment: 63 mm table surface area: 1200x630 mm ram surface: 800x315 mm hole in the table: Ø 110 mm table height: 820 mm tool hole in ram: Ø 50 mm dayligth: 335 mm total power requirement: 7,5 kW weight of the machine ca.: 5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: Stroke of the ram: 8 - 58 mm Pressing force: 10 to Flywheel: 125 rpm Table dimensions: 320 x 320 mm Hole diameter: approx. 85 mm weight approx.: 500 kg, Approx. Onsite Dimension. (l x w x h): 900 x 800 x 1,800 mm
used
Description: Serial number: PN63/250 69/32.0458/2 Press force: 63 t Ram stroke: 8 - 100 mm Stroke number: 140/min Lower table top dimensions: approx. 720 x 500 mm Upper table top dimensions: approx. 450 x 280 mm weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 1,600 x 1,400 x 2,500 mm
used
Description: press power: 63 t table dimensions L×W: 700x550 mm table opening LxW: 265X265 mm presser LxW: 320x300 mm presser stroke: 130 mm (fixed) max distance of the presser from the table: 400 mm PLC components: SIEMENS SIMATIC S7-300 pneumatic components: FESTO commands: single (foot-shoe, two-handed-lever), continuous (automatic mode-setting time interval 1-99999s and number of repetitions 1-32000) a special function for determining the lower position of the presser automatic lubrication of the machine pneumatic triggering and braking Max. pressing force: 63 to, stroke: 130 mm, table surface area l x w : 700x550 mm, weight approx.: 4,500 kg, Approx. Onsite Dimension. (l x w x h): 1,800 x 1,300 x 2,500 mm
used
pressure:40 t throat:220 mm stroke:8 / 88 mm table pass:ø- abgesetzt 225/200 mm ram head dimension:400 x 250 mm distance table/ram:228 mm stroke adjustable from - to:30 - 140 mm ram adjustment:63 mm thickness of bolster:80 mm no. of strokes:70 Hub/min total power requirement:5,5 kW weight of the machine ca.:2600 kg dimensions of the machine ca.:1100 x 1300 x 2300 mm Documents:vorhanden
used
pressure:063 t throat:450 mm stroke:8 - 100 mm no. of strokes:65 /min distance table/ram, max. stroke up, adjustment up:415 mm table surface area:720 x 800 mm hole in the table:280/250 mm table height over floor:800 mm passage to the back:290 mm ram surface:450 x 280 mm ram adjustment:63 mm power requirement:7,5 kW weight:4,7 t dimensions (WxDxH):1,3 x 2,0 x 2,65 m clutch:pneumatisch overload protection in ram:mechanisch
used
pressure:100 t throat:315 mm stroke:30 - 160 mm no. of strokes:40 /min distance table/ram, max. stroke up, adjustment up:460 mm table surface area:910 x 680 mm Hole in the table:400 mm table height over floor:800 mm passage to the back:400 mm ram surface:630 x 400 mm ram adjustment:80 mm power requirement:7,5 kW weight:7,5 t dimensions (WxDxH):1,7 x 2,0 x 3,0 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic overload protection in ram:mechanical ram counterbalance:pneumatic
used
Pressure:080 t throat:280 mm stroke:20 - 120 mm no. of strokes:42 - 125 /min distance table/ram, max. stroke up, adjustment up:510 mm table surface area:700 x 560 mm hole in the table:280 mm table height over floor:800 mm passage to the back:320 mm ram surface:560 x 350 mm ram adjustment:72 mm Weight:5,2 t Dimensions (WxDxH):1,6 x 1,6 x 2,6 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:pneumatic overload protection in ram:mechanical
used
pressure:025 t throat:200 mm stroke:8 - 80 mm no. of strokes:60 - 180 /min distance table/ram, max. stroke up, adjustment up:330 mm table surface area:560 x 400 mm hole in the table:150 mm table height over floor:800 mm passage to the back:240 mm ram surface:355 x 220 mm ram adjustment:50 mm weight:3,0 t dimensions (WxDxH):1,0 x 1,4 x 2,2 m infinitely variable drive:Stöber overload protection in ram:mechanical NEW electrical controls:Pilz
used
pressure:025 t throat:200 mm stroke:8 - 80 mm no. of strokes:180 /min distance table/ram, max. stroke up, adjustment up:330 mm table surface area:550 x 400 mm hole in the table:60 mm table height over floor:800 mm passage to the back:200 mm ram surface:355 x 220 mm ram adjustment:50 mm power requirement:2,7 kW weight:2,5 t dimensions (WxDxH):1,2 x 1,8 x 2,4 m overload protection in ram:mechanical
used
pressure:160 t throat:400 mm stroke:30 - 200 mm no. of strokes:50 /min distance table/ram, max. stroke up, adjustment up:600 mm table surface area:1000 x 770 mm table height over floor:810 mm hole in the table:360 mm Passage to the back:450 mm ram surface:710 x 450 mm ram adjustment:110 mm power requirement:15,0 kW weight:10,5 t Dimensions (WxDxH):1,7 x 2,0 x 3,2 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:hydraulic overload protection in ram:mechanical ram counterbalance:pneumatic