used SCHRÖDER Heat exchangers

* General * SKUR0090 * LocationBarneveld * MakeSchröder & Co (D) * Typemanufacturer plate is missing * No.30-392 * Main Features * MaterialStainless steel * Volume2 Ltr. * Motor2.2 KW * Specified Features - Scraped surface heat exchanger * Capacity2 Ltr. * Inletdia. 25mm * Outletdia. 25mm * With motor2.2 kW 230 Volt * With variable speed drivefrequency controller * Scraped surface heatexchangers * MaterialStainless steel * Cylinder sizesdia. 95x350mm * Inletdia.25mm * Outletdia.25mm * Motor2,2 kW 230 Volt * With variable speed drivefrequency controller * Information * Mounted on wheelscheck * With switchgearcheck * Floorspace1,3x0,4 M * Total height1,4 M * Weight260 KgScraped surface heat exchangersSchröderHeat exchangers > Scraped surface heat exchangersBrand > Schröder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready f ...

* General * SKU354T1373 * LocationBarneveld * MakeSchroder Kombinator * TypeVEMK 01/108-350 * No.11/4053-1-182757 * Year of construction2002 * Main Features * MaterialStainless steel * Volume1.8 Ltr. * Motor3 KW * Specified Features - Scraped surface heat exchanger * MaterialStainless steel 1.4571 (316Ti) * Scraped surface heatexchangers * Mixercheck * Capacity1,8Ltr. * Information * Total height1,7m * Weight380kg * CEcheck * Floorspace1,7x0,65m * Extra Specificationsthe interior is peg mill-based. this machine has been used for margerine / fat operating pressure: 25bar maximum temperature: 90°C capacity: 50-150kg/h used for post-treatment of grease. emulsifier / homogeniser Scraped surface heat exchangersSchröderHeat exchangers > Scraped surface heat exchangersBrand > Schröder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new --  ...

* General * SKUR0087 * LocationBarneveld * MakeSchröder & Co Maschinenfabrik (D) * TypeVWK 01/60-400 * No.110705 * Year of construction1989 * Main Features * MaterialStainless steel * Motor2.2 KW * Surface0.07 m2 * Specified Features - Scraped surface heat exchanger * MaterialStainless steel * Number of stages:1 * Heating surface0.07 M2 * Cylinder sizesdia.60x380mm * With jacketcheck * Inletdia. 25mm * Outletdia. 25mm * Motor2,2 kW 230 Volt * With variable speed drivefrequency controller * Information * Mounted on wheelscheck * With switchgearcheck * Total height1,4 M * Weight230 Kg * Floorspace1,4x0,4 MScraped surface heat exchangersSchröderHeat exchangers > Scraped surface heat exchangersBrand > Schröder What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to ins ...

* General * SKU311P700 * LocationBarneveld * MakeSchröder&Co Maschinenfabrik (DE) * No.23-232 * Year of construction1984 * Main Features * MaterialStainless steel * Motor2.2 KW * Specified Features - Scraped surface heat exchanger * MaterialStainless steel * Scraped surface heat exchangerCooler * Number of stages:1 * Cylinder sizes+/- dia.80mm x350mm * Max. temperature-20 degr.C. * Inletdia.25mm (product), dia.25mm (Glycol) * Outletmissing * Motor2,2 KW, 220/380 Volt * With variable speed drivecheck * With variable speed drivecheck * Information * Mounted on framecheck * Mounted on wheelscheck * With switchgearcheck * Floorspace1,4x0,7 M * Total height1,3 M * Weight150 KG * Technical specs * Extra informationcylinder size: dia. 80 mm x 350 mmScraped surface heat exchangersSchröderHeat exchangers > Scraped surface heat exchangersBrand > Schröder What you can expect from Foeth: -- Machi ...

Schroeder-Combinator / scraped surface heat exchanger technical details: capacity/ flow rate: 20-100 ltr/h against 12 bar engine power: 3,5 KW dimensions: length x with x higth : 170 x 43 x 85 cm weight ca.: 150 kg with this device you can go with: hight viscosity and lumpy food for heating, cooling, mixing and pumping

Type: UTK 18 200-2a-2e Power: 2 X 11 kW + 1 X 7.5 of kW, 380 V, 50 Hz Perslucht: max 20-25 bar Weight: 4,000 kg YOM 1985 Scraped surface heat exchanger for heating, temperature holding and cooling of liquid, vegetable, high viscous and crystalline products. Previous used for heating, holding (volume ± 85 ltr) and with steam cooling of food products (sauces) and ammonia (NH3, 125 ltr., 17 bar,-20 ° C / 45 ° C). 2 independent ammonia system. Constant quality of the product, continuous running and inline cleaning system (CIP).

Scraped surface heat exchanger, 2 Cylinders, Top cylinder: diameter: 25cm, rotor: 22,8 cm Length: 120 cm surface: 0,94 m2 Bottom cylinder diameter 33.5 cm, rotor diameter 31.5 cm, length 140 cm surface: 1.47 m2. 2 x electric drive motor: Top: 11 kW, 23A - 50 Hz, bottom: 18.5 kW, 36A - 50 Hz

Scraped surface heat exchanger, 2 Cylinders, Top cylinder: diameter: 25cm, rotor: 22,8 cm Length: 120 cm surface: 0,94 m2 Bottom cylinder diameter 33.5 cm, rotor diameter 31.5 cm, length 140 cm surface: 1.47 m2. 2 x electric drive motor: Top: 11 kW, 23A - 50 Hz, bottom: 18.5 kW, 36A - 50 Hz

Dough knitting machine - Make: SCHNÖDER - Model: FORTUNA Automat Gr. 3 - With new working plate - Condition: Used, restored - Warranty: 6 months

Dough dividing and moulding machine Make: SCHRÃ?DER Model: FORTUNA A-3 slot 30-piece set With 3 new casting plates -top obsolete -with warranty -Delivery: free house within Germany

Technical data Manufacturer: Otto Schröder Stroke: 160mm hand adjustable Distance between the stand: 800mm Pass: 250mm Support table: 800mm, with 4 grooves subcircle of 400mm groove dimension 25x75mm Bore: table center of 70mm Table height: 835mm Dimensions: LxWxH 110x900x2200mm

Type: SCHRÖDER N 82 Number of needles: 82 Diameter of needles: 3 mm Product width: 420 mm Transportation type: walking beam Product passage height: 180 mm Brine pressure: 0,5 – 4,0 bar Machine dimensions in cm: Width: 110,0 Width with filter for brine: 200,0 Length: 210,0 Height: 200,0 Compressed air: 6bar Power: 9,0 kW, 15А Voltage: 380 V, 50 Hz

Type: SCHRODER N 120 Number of needles: 120 Diameter of needles: 3 mm Product width: 620 mm Transportation type: walking beam Product passage height: 180 mm Brine pressure: 0,5 – 4,0 bar Machine dimensions in cm: Width: 120,0 Width with filter for brine: 200,0 Length: 220,0 Height: 225,0 Compressed air: 6,0 bar Power: 14,0 kW Voltage: 380 V, 50 Hz

Type: : Schröder N 138 Number of needles: 138 Diameter of needles: 4,0 mm Product width: 620 mm Transportation type: walking beam Product passage height: 200 mm Brine pressure: 0,5 – 4,0 bar Machine dimensions in cm: Width: 110,0 Length: 220,0 Height: 230,0 Power: 10,0 kW Voltage: 380 V, 50 Hz

Type: MAX 500 Max. product weight: 500 кg. Drum diameter: 1000 mm Machine dimensions in mm: Width: 1600,0 Lenght: 3100,0 (incl. loading trolley) Height : 2300,0 Unloading height: 750,0 mm. Vacuum pump: 40 m3/h Power: 4,0 kW Voltage: 3х400 V, 50 Hz, 8,0 A Weight: 760 кg.

Type: IMAX 520 Working with boneless meat Product width: 520 мм Cycles: 15 to 60 per minute Feed: max. 60 mm Product height: 130÷230 mm Number of needles: 200 (2 х 100), 4 мм Brine pressure: 0,5-4,5 bar Machine charging height: 1170 mm Compressed air: 6bar Voltage: 230/400 V, 50/60 Hz Connection: 10,0 kW ; 23 А Rotary brine filter DF 510 Machine dimensions in mm: Length: approx. 2100 Width: approx. 1350 (about 2500 mm with filter) Height: approx. 2300

Type: N 50 Number of needles: 50 Diameter of needles: 4,0 mm Max. product width: 350 mm Transportation type: walking beam Product passage height: max 180 mm Brine pressure: 0,5 - 4,0 bar Machine dimensions in mm: Width: 800,0 Length: 1600,0 Height: 1900,0 Power: 8,0 kW , 17 A Voltage: 380 V, 50Hz

Inline homogenizer Manufacturer: Gerstenberg Schröder Type: RL 280/170 Built: 2006 N°: 4299-2-197917 Power: 50 hp Volume: 6 l Speed: 1330 rpm at 50 Hz as good as new Weight: approx. 850 kg Application: Margarine, mayonnaise, dressings, sauces (continuous production) Capacity: 5000-10000 kg/h (for oil content 80%) LWH: 1800 x 800 x 900 mm

SCHROEDER Plate shears Product number 821741 Manufacturer SCHRODER Model / type unknown Year of manufacture 1998

SCHRÖDER DM-500 ID.NO. 2117 Schröder DM-500 brine mixer with mixer and pusher that goes up and down. Dimensions 135 x 135 cm H 180 cm. Available 4x in stock.

Thermo-Combinator Crystallizer Schab Heat Exchanger / Cooler with scraped surface used Manufacturer: Schröder&Co Type: UTK 18/200-DH2A Stainless steel The system was used to heat, maintain temperature and cool ketchup. Hourly output approx. 1800 - 2000 kg 1 dosing pump with two pump heads for water/spice paste and tomato paste Capacity tomato paste 0-868 l/h Total dimensions approx. 3.5 x 1 x 1.5 m. Original price was approx. 270,000 DM The plant comes from a plant where canned food was produced. Changes and errors in the technical data and information excepted.

Microcut/ continuous cutter, colloid mill. High-performance machine for use in continuously operating process lines. Product - Mounting funnel: capacity 30 liters completely in V2A Nirosta stainless steel, 3 different perforated discs - inserts and 5 sets - knife blades

Sheet thickness: 8,00 mm Folding length: 1250 mm Depth rear gauge: 1000 mm CNC Brand: _Unknown / Other CNC Model: POS 900 Make Schroder 8 mm Type MAK 4 / 1500 x 8.0 Year 1998 POS 900 - 1000 mm Sheet thickness (mm) T = 8.0 mm Folding length (mm) L = 1.520 Depth rear gauge (mm)X = 1.000Hydr. upper & lower beam Hydraulic top tool clamping 1 set tooling  

working width: 2520 mm for sheets up to: 2.5 mm Opening width upper cheek: approx. 250 mm Adjustability bending cheek: 30 mm Upper cheek drive: 1.5 kW Lower cheek drive: 2.3 kW electr. Connection: 380 V kW Weight: 2300 kg Space requirement: 3300 x 1400 x 1430 mm

Working width: 2500mm, bending capacity: 3mm, connected load: 5kVA, weight: 3.5t.