used SCHARMANN Boring Mills

Scharmann boring mill Ecocut 1.1 TDV 3 / Retrofit in 2015, Year of construction 1983 / Retrofit 2015 by Scharmann Control Siemens 840 D, Travel X/Y/Z/W 2000/1450/1400/600 mm, Table clamping surface 120 x 1600 mm, Enclosure open at the top installed in 2015, Feeds up to 6 m/min, spindle speed up to 3,000 rpm - 30 KW, Machine does not need a foundation !!! due to the self-designed polymer bed, max workpiece weight 12,000 kg, Machine weight 24,350 kg, complete documentation, Additional equipment: A CNC-controlled face plate is integrated in the drill quill. With this device, contours up to Ø600 can be rotated Services provided during retrofitting The machine was electrically and mechanically overhauled by Scharmann, most recently in 2015. During the overhaul, the entire electrical system was replaced and the control system w ...

SCHARMANN HEAVYCUT 2 WFT 150 CNC Floor type Boring Mill Year 1978 Spindle Diameter: 5.9" (150mm) Milling Spindle Diameter: 11.02 (280mm) Spindle Taper: CAT 50 Ram Cross Section: 11.81" x 11.81" (300x300mm) Vertical Head Travel, Y-Axis: 137.79" (3500mm) Column Travel, X-Axis: 712.59" (18000mm) Quill Travel, Z-Axis: 23.43 (595mm) Ram Travel, W-Axis: 27.6" (700mm) Z & W Axis, Combined: 51.03" (1296mm) Spindle Speeds: 5.5-1000 RPM Spindle Feed Range: 0.003-240 IPM Rapid Traverse: 396 IPM Spindle Motor: 70 HP/ 105 HP EQUIPPED WITH: Heidenhain TNC 407 CNC Controls Ram and Spindle Travel Sliding Way Covers On X-Axis Bed Right Angle Head With 1 Degree Manual Indexing Hardened Ways Re-pained recently

Travel X-axis 19,000 mm Y-axis 3,500 mm Z-axis 1,000 mm W-axis 1,000 mm V-axis 2,500 mm B-axis 360°/ 0.001 Table size 4,000 x 3,500 mm Maximum permissible weight on the table 65 t Spindle diameter 160 mm Mounting cone in spindle 2079 DIN/ ISO 50 Spindle speed 2.5 - 1,000 rpm Spindle motor power 90 kW RAM cross section 400 x 400 mm Automatic tool changer 60 positions Feed in all axes 1 - 6,000 mm/min Rapid response in all axes 10,000 mm/min Automatic indexing 360,000° Plate field 12,750 x 6,000 mm CNC, electrical and mechanical overhaul by Siemens in 2003

spindle diameter: . mm x-travel: . mm y-travel: . mm table length: 2000 mm table width: 2000 mm table load: 25 t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 125 mm x-travel: 8000 mm y-travel: 3000 mm spindle bore: 240 mm w-axis: 1650 mm total power requirement: . kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Facing slide needs overhauling.

Facing slide needs overhauling.

spindle diameter: 180 mm x-travel: 5000 mm y-travel: 3000 mm bore spindle stroke: 1000 mm ram stroke: 1000 mm dimension of the ram: 425 x 425 mm spindle taper ISO: 50 spindle turning speed - stepless: 3 - 1600 U/min feed stepless: 0 - 10000 mm/min table surface area: 3500 x 2500 mm table rotating: 360 ° table load: 50 t power capacity: 90 kW rapid traverse: 10 m/min table travel: 2500 mm table height: 1450 mm weight of the machine ca.: 125 t dimensions of the machine ca.: 11x12x6,3 m + completely electrically overhauled with new motors in 2012 and equipped with a new control Heidenhain iTNC 530! + NC-turn table 3500 x 2500 mm - 50 to cap. + ATC 60-fold + Cooling unit + chip conveyor + angle clamping plate 2400x1700x1200 mm +++++ mecahincally and electrically in top condition! +++++ The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 180 mm x-travel: 5000 mm y-travel: 3000 mm bore spindle stroke: 1000 mm ram stroke: 1000 mm dimension of the ram: 425 x 425 mm spindle taper ISO: 50 spindle turning speed - stepless: 3 - 1600 U/min feed stepless: 0 - 10000 mm/min table surface area: 3500 x 2500 mm table rotating: 360 ° table load: 50 t power capacity: 90 kW rapid traverse: 10 m/min table travel: 2500 mm table height: 1450 mm total power requirement: kW weight of the machine ca.: 125 t dimensions of the machine ca.: 11x12x6,3 m + completely electrically overhauled with new motors in 2012 and equipped with a new control Heidenhain iTNC 530! + NC-turn table 3500 x 2500 mm - 50 to cap. + ATC 60-fold + Cooling unit + chip conveyor + angle clamping plate 2400x1700x1200 mm +++++ mecahincally and electrically in top condition! +++++ The data for this ad was created with ModulMWS - the software solution of Lo ...

x-travel: 2000 mm y-travel: 2000 mm z-travel: 1400 mm spindle stroke: 1000 mm turning speeds: 5-800 U/min Radial face slide: 700 mm Radial face slide: 2,2-115 U/min spindle taper ISO: 50 table surface area: 2000x1800 mm Table load: 14000 kg total power requirement: 42 kW weight of the machine ca.: 24,5 t dimensions of the machine ca.: 6,3x5x4,3 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: . mm x-travel: 2500 mm y-travel: . mm : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Scharmann FB 100 boring machine Slides and table in excellent condition, no dents. Stroke: X 1300 mm Y 1200 mm Z 2000 mm Equipped with digital display on 3 axes. Work feed on table rotation. Machine weight: 25 tons With 6 tool pallets, clamping cube 1000 mm x 900 mm x 900 mm, and angular head.

Description: Included - 3-axis digital display - Operation manual Spindle diameter 75 mm x-travel 850 mm y-travel 900 mm z-travel 950 mm Spindle holder ISO SK 40 Table size 1000 x 800 mm Total power requirement 16 kW Machine weight approx. 10.5 t Space requirement approx. 4.0 x 2.3 x 2.75 m weight approx.: 10,500 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 2,300 x 2,750 mm

Description: horizontal floory type boring machine Spindle diameter 125 mm x-travel 5600 mm y-travel 1600 mm z-travel 800 mm Spindle stroke 600 mm Spindle mount ISO 50 Spindle speeds 12 - 3000 rpm Spindle motor 40 kW Rapid traverse speed 15 m/min with CNC HEIDENHAIN iTNC 530 modernized in 2003 Tool changer 60 times Drilling work table RÜCKLE 2000 x 1800 mm max. 20 tons. workpiece weight Clamping plates 3500 x 2000 mm, 2500 x 2000 mm Coolant device z-motion: 800 mm, spindle diameter: 125 mm, x-motion: 5,600 mm, y-motion: 1,600 mm, control: CNC Heidenhain iTNC 530 modernisiert in 2003, table surface area l x w : 2000x1800 mm, spindle taper: ISO 50, turning speed range: 12-3000 rpm, total power requirement: 65 kW, weight approx.: 60,000 kg, Approx. Onsite Dimension. (l x w x h): 12,100 x 4,800 x 3,900 mm

Technical data: Table load: 20 to. Table length: 2,000mm Table width: 2,000mm Table height: 930mm Table shift: 1,500mm Total power: 8.1 kW

Spindle diameter 120 mm X-axis 1200 mm Y axis 1200 mm Z axis 600 mm W axis 1000 mm Table load 6000 kg

Complete system with all accessories required for installation and operation, see below! Travels x = 7000 y = 1600 z = 800 / quill stroke w = 600mm *** General overhaul in 2007, year of production 1991: New control system Siemens Sinumerik 840D, new drive motors, guideways refurbished, new control cabinets. ECOCUT 1 was only operated for a few months thereafter *** Feed rate 12000 mm / min // w axis 6000 mm / min Xua2eg8fx Rotary table TDV 2 max. Workpiece weight 6t / clamping surface 1000x1000 Rotary table TDV 3 max. Workpiece weight 12t / clamping surface 1250x1600 Accessories: 2 like new angular crankset / chain tool change system / plate field / complete housing / Knoll funnel feeder / extraction / coolant system with belt filter All BWF fixators for installation of machine bed and panel

Spindle diameter 75 mm x trail 1000 mm y way 1000 mm z axis 2380 mm W axis (spindle length) 500 mm Table: 900 x 710-360° mm Loading of the round table max. 1100 kg Output spindle speed 18 x 1400 RPM Spindle box drive 11/13 kW Rapid traverse 10 m / min Weight CCA 5 t L/B / H 3.8 x 1.8 x 2.6 m Control conventional control name conventional price includes loading on truck

Flat slider for drilling rig for mounting in the drilling spindle Tool holder SK50

spindle diameter: 130 mm x-travel: 2000 mm y-travel: 1400 mm z-travel: 1400 mm spindle taper ISO: 50 table surface area: 1000x800 mm table load: 12 t number of spindle speeds: 8-1650 U/min digital readout: total power requirement: 12 kW weight of the machine ca.: 9 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 150 mm x-travel: 3000 mm y-travel: 2000 mm z-travel: 1500 mm w-axis: 700 mm spindle taper: ISO 50 control: Siemens type: 850 M mm table surface area: 2000x1600 mm Table load: 12000 kg turning speeds: 12-3000 U/min spindle motor: 30 kW feed: 0-6 m/min chip conveyor: coolant: total power requirement: 60 kW weight of the machine ca.: 40 t dimensions of the machine ca.: 8x6,3x5,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 2000 mm y-travel: 1600 mm z-travel: 1000 mm module: Siemens 850M mm w-axis: 600 mm b-axis: 360 ° spindle taper ISO: 50 Torque: 2350 Nm output: 40 kw spindle turning speed range: 28-2800 U/min : max 7 bar Feed: 1-3000 mm/min b-axis: 2,7 U/min size of pallet: 1500x1500 mm table load: 8 t T-slots: 22H7x 22 mm Tief flute distance: 200 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 132 mm x-travel: 2000 mm y-travel: 1350 mm z-travel: 2340 mm table surface area: 2000x1500 mm spindle stroke: 1000 mm turning speeds: 3,5-1000 U/min Radial face slide: 600 mm Radial face slide: 3,5-100 U/min Feed: 2250 mm/min spindle taper ISO: 50 Table load: 15000 kg total power requirement: kW weight of the machine ca.: 24,5 t dimensions of the machine ca.: 6,3x5x3,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 1250 mm swing diameter: 1400 mm turning height: 980 mm table load: 3 t Control: Siemens type: Sinumerik 880T x-axis: 1000 mm z-axis: 1000 mm w-axis: 600 mm c-axis: 360 ° live tooling: Tool changer: 62 Pos. chip conveyor: coolant: grinding head: horizonzal grinding head: vertical power capacity - table: 69 kW total power requirement: kW weight of the machine ca.: 26 t dimensions of the machine ca.: 8,7x7x5,2 m • Table speed / Drehzahl der Planscheibe: 2 Getriebestufen, Drehzahl = 4,5 – 500U/min • Ram section / Stößel Querschnitte: 240mm x 240mm • Live tools speed / Drehzahl der angetriebene Werkzeuge: o Schleifspindel waagerecht: 3000U/min o Schleifspindel senkrecht: 3000 – 6000U/min o Fräsen: 10-2000U/min • Live tools power / KW Leistung der angetriebenen Werkzeuge: o Schleifspindel waagerecht: 3kW o Schleifspindel senkrecht: 3kW  ...

spindle diameter: 80 mm x-travel: 1100 mm y-travel: 750 mm z-travel: 1350 mm surface area: 1000 x 1000 mm total power requirement: 6 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 5x3x3 m • 3-axis-D.R.O. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.