We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
This DÃRRIES SCHARMANN VC5000/450 MC Lathe was made in 2008 in Germany. It is equipped with a SIEMENS SINUMERIK control unit.
used
Travel X-axis 19,000 mm Y-axis 3,500 mm Z-axis 1,000 mm W-axis 1,000 mm V-axis 2,500 mm B-axis 360°/ 0.001 Table size 4,000 x 3,500 mm Maximum permissible weight on the table 65 t Spindle diameter 160 mm Mounting cone in spindle 2079 DIN/ ISO 50 Spindle speed 2.5 - 1,000 rpm Spindle motor power 90 kW RAM cross section 400 x 400 mm Automatic tool changer 60 positions Feed in all axes 1 - 6,000 mm/min Rapid response in all axes 10,000 mm/min Automatic indexing 360,000° Plate field 12,750 x 6,000 mm CNC, electrical and mechanical overhaul by Siemens in 2003
used
X-travel: 2000mm, y-travel: 1450mm, z-travel: 1400mm, quill stroke: 600mm, max. load: 12t, table dimensions: 1250x6000mm, length: 6150mm, width: 5050mm, height: 4430mm, weight: 24.35t, with documentation.
used
spindle diameter:125 mm x-travel:5600 mm y-travel:1600 mm z-travel:800 mm spindle stroke:600 mm spindle taper ISO:50 spindle turning speed range:12 - 3000 U/min spindle drive:40 kW rapid speed:15 m/min total power requirement:65 kW weight of the machine ca.:60 t dimensions of the machine ca.:12,1 x 4,8 x 3,9 m with CNC HEIDENHAIN iTNC 530 modernized in 2003 automatic toolchanger 60 pockets boring table make: RÜCKLE 2000 x 1800 mm max. 20 to. load floor plates 3500 x 2000 and 2500 x 2000 mm coolant attachment
used
Technical data: Table load: 20 to. Table length: 2,000mm Table width: 2,000mm Table height: 930mm Table shift: 1,500mm Total power: 8.1 kW
used
Spindle diameter 120 mm X-axis 1200 mm Y axis 1200 mm Z axis 600 mm W axis 1000 mm Table load 6000 kg
used
Complete system with all accessories required for installation and operation, see below! Travels x = 7000 y = 1600 z = 800 / quill stroke w = 600mm *** General overhaul in 2007, year of production 1991: New control system Siemens Sinumerik 840D, new drive motors, guideways refurbished, new control cabinets. ECOCUT 1 was only operated for a few months thereafter *** Feed rate 12000 mm / min // w axis 6000 mm / min Xua2eg8fx Rotary table TDV 2 max. Workpiece weight 6t / clamping surface 1000x1000 Rotary table TDV 3 max. Workpiece weight 12t / clamping surface 1250x1600 Accessories: 2 like new angular crankset / chain tool change system / plate field / complete housing / Knoll funnel feeder / extraction / coolant system with belt filter All BWF fixators for installation of machine bed and panel
used
Spindle diameter 75 mm x trail 1000 mm y way 1000 mm z axis 2380 mm W axis (spindle length) 500 mm Table: 900 x 710-360° mm Loading of the round table max. 1100 kg Output spindle speed 18 x 1400 RPM Spindle box drive 11/13 kW Rapid traverse 10 m / min Weight CCA 5 t L/B / H 3.8 x 1.8 x 2.6 m Control conventional control name conventional price includes loading on truck
used
Flat slider for drilling rig for mounting in the drilling spindle Tool holder SK50
used
spindle diameter: . mm x-travel: . mm y-travel: . mm table length: 2000 mm table width: 2000 mm table load: 25 t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 130 mm x-travel: 2000 mm y-travel: 1400 mm z-travel: 1400 mm spindle taper ISO: 50 table surface area: 1000x800 mm table load: 12 t number of spindle speeds: 8-1650 U/min digital readout: total power requirement: 12 kW weight of the machine ca.: 9 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 150 mm x-travel: 3000 mm y-travel: 2000 mm z-travel: 1500 mm w-axis: 700 mm spindle taper: ISO 50 control: Siemens type: 850 M mm table surface area: 2000x1600 mm Table load: 12000 kg turning speeds: 12-3000 U/min spindle motor: 30 kW feed: 0-6 m/min chip conveyor: coolant: total power requirement: 60 kW weight of the machine ca.: 40 t dimensions of the machine ca.: 8x6,3x5,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
x-travel: 2000 mm y-travel: 1600 mm z-travel: 1000 mm module: Siemens 850M mm w-axis: 600 mm b-axis: 360 ° spindle taper ISO: 50 Torque: 2350 Nm output: 40 kw spindle turning speed range: 28-2800 U/min : max 7 bar Feed: 1-3000 mm/min b-axis: 2,7 U/min size of pallet: 1500x1500 mm table load: 8 t T-slots: 22H7x 22 mm Tief flute distance: 200 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 125 mm x-travel: 8000 mm y-travel: 3000 mm spindle bore: 240 mm w-axis: 1650 mm total power requirement: . kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 132 mm x-travel: 2000 mm y-travel: 1350 mm z-travel: 2340 mm table surface area: 2000x1500 mm spindle stroke: 1000 mm turning speeds: 3,5-1000 U/min Radial face slide: 600 mm Radial face slide: 3,5-100 U/min Feed: 2250 mm/min spindle taper ISO: 50 Table load: 15000 kg total power requirement: kW weight of the machine ca.: 24,5 t dimensions of the machine ca.: 6,3x5x3,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
faceplate diameter: 1250 mm swing diameter: 1400 mm turning height: 980 mm table load: 3 t Control: Siemens type: Sinumerik 880T x-axis: 1000 mm z-axis: 1000 mm w-axis: 600 mm c-axis: 360 ° live tooling: Tool changer: 62 Pos. chip conveyor: coolant: grinding head: horizonzal grinding head: vertical power capacity - table: 69 kW total power requirement: kW weight of the machine ca.: 26 t dimensions of the machine ca.: 8,7x7x5,2 m • Table speed / Drehzahl der Planscheibe: 2 Getriebestufen, Drehzahl = 4,5 – 500U/min • Ram section / Stößel Querschnitte: 240mm x 240mm • Live tools speed / Drehzahl der angetriebene Werkzeuge: o Schleifspindel waagerecht: 3000U/min o Schleifspindel senkrecht: 3000 – 6000U/min o Fräsen: 10-2000U/min • Live tools power / KW Leistung der angetriebenen Werkzeuge: o Schleifspindel waagerecht: 3kW o Schleifspindel senkrecht: 3kW ...
used
spindle diameter: 80 mm x-travel: 1100 mm y-travel: 750 mm z-travel: 1350 mm surface area: 1000 x 1000 mm total power requirement: 6 kW weight of the machine ca.: 5 t dimensions of the machine ca.: 5x3x3 m • 3-axis-D.R.O. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 125 mm x-travel: 950 mm y-travel: 900 mm spindle taper ISO: 50 z-travel: 900 mm Table dimensions: 750x750 mm Radial face slide: 500 mm turning speeds: 15-855 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 180 mm x-travel: 8800 mm y-travel: 3500 mm Control: Siemens type: 840 C ram: horizontal adjustment: 970 mm spindle travel: 1200 mm dimension of the ram: 400x400 mm Plate area: 6000x4000 mm rotary table:: Table load: 25000 kg table travel: 1500 mm angular milling head: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
spindle diameter: 80 mm x-travel: 1200 mm y-travel: 1000 mm z-travel: 815 mm Spindle travel: 450 mm spindle taper ISO: 40 Radial face slide diameter: 498 mm table surface area: 1000x800 mm digital readout: coolant: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
: 150 mm : 500 mm weight of the machine ca.: 0,75 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
a well-preserved CNC portal milling machine Dörries Scharmann] type FZ 25, built in 1994, table 6000 x 2500 mm, travel distances X/Y/Z 6000/2500/2000 mm, portal passage 3000 mm, table load approx. 40 tons, with automatic milling head change. CNC control Heidenhain TNC426, dimensions approx. 18 x 8 x 7 m, weight approx. 174 to.
used
Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0 Positions APC: 0 CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Technical data Number of machines: 1 Number of axis total: 5 Longitudinal travel (X-axis): 1500 mm Transversal travel (y-axis): 1200 mm Vertical travel (z axis): 1250 mm Table divisions (B): 360x0.0001 ° A axis Table speeds: up to: 1 - 500 rpm number: 2 Length: 1000 mm Width: 1000 mm Transport weight: 2000 kg Tool changer: Number of tools: 161 Tool diameter: 300 mm Max. tool-weight: 25 kg Spindle nose:: HSK-A 100 Spindle speeds: stepless from: 10 rpm up to: 4000 rpm Voltage 50 Hz 3x: 400 Volt Spindle motor: 40 kW Total power required: 180 kW Machine´s weight about: 6000 kg Overall dimensions machine: Length: 8500 mm Width: 4800 mm Height: 4800 mm Various accessories: Full splash cabin Coolant sy ...
used
Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0 Positions APC: 0 CNC Brand: 0 CNC Model: 0 Control: SIEMENS SINUMERIK 840 D Technical data Number of machines: 1 Number of axis total: 5 Longitudinal travel (X-axis): 1500 mm Transversal travel (y-axis): 1200 mm Vertical travel (z axis): 1250 mm Table divisions (B): 360x0.0001 ° A axis Table speeds: up to: 1 - 500 rpm number: 2 Length: 1000 mm Width: 1000 mm Transport weight: 2000 kg Tool changer: Number of tools: 161 Tool diameter: 300 mm Max. tool-weight: 25 kg Spindle nose:: HSK-A 100 Spindle speeds: stepless from: 10 rpm up to: 4000 rpm Voltage 50 Hz 3x: 400 Volt Spindle motor: 40 kW Total power required: 180 kW Machine´s weight about: 6000 kg Overall dimensions machine: Length: 8500 mm Width: 4800 mm Height: 4800 mm Various accessories: Full splash cabin Coolant sy ...
used
x-travel: 1600 y-travel: 1300 mm z-travel: 1450 mm Control: Siemens 840C Tool changer: 100pos number of spindle speeds: 10-4000U/min tool taper: Iso50 A-axis: -100°/+10° c-axis: 360.000° 0 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.