used SCHARF Drying chambers

Scharfen meat slicer Model: V330 stainless, ideal for slicing ham, cheese and other fresh meats, 1Ph, 330mm diameter blade, (four in stock from 2016 - 2018)

equipped with Mettler Toledo scale, stainless steel housing

Meat cutting machine with program control different filing patterns Repaired

slicer, food slicer, slicer -Manufacturer: Sharp, Mettler Toledo slicer type E300W -Drive: 230 V / 250 W -Dimensions: 600/580/H420 mm -Weight: 45 kg

Description: Volume: 1700l Suitable for storing liquids. Approx. Onsite Dimension. (l x w x h): 1,600 x 1,600 x 3,000 mm, weight approx.: 500 kg

Scharfen tumbler, type: HR, model: HR2035, number: 2218002, year of construction: 2021, 230 V, 2.2 A, 350 W, drum dimensions: ø 390 mm x 400 mm, total dimensions: 650 mm x 500 mm x 750 mm.

Scharfen slicer, type: G330A, number: 2081208, year of construction: 2008, 230 V, 3 A, 600 watt, dimensions: 700 mm x 720 mm x 620 mm.

Scharfen slicer, type: ATM3, number: 2021322, year of construction: 2002, 230 V, 1 Ph, 3.0 A, 600 W, dimensions: 740 mm x 550 mm x 600 mm. Including knife sharpener.

Scharfen slicer, type: ATM3, number: 2051411, year of construction: 2005, 230 V, 1 Ph, 3.0 A, 600 W, dimensions: 750 mm x 500 mm x 610 mm.

Scharfen slicer, type: G330, model: G330DW, number: 2171118, year of construction: 2017, 230 V, 50 Hz, 3 A, 600 W, dimensions: 750 mm x 700 mm x 630 mm.

Scharfen tumbler, type: HR, model: HR2050, number: 2218021, year of construction: 2021, 230 V, 2.2 A, 350 W, drum dimensions: ø 390 mm x 400 mm, total dimensions: 750 mm x 500 mm x 750 mm.

- clamping surface (left-right):4000 mm - clamping surface (front-back):2050 mm - rotation:360 ° - - rotation speed:1.3 /min ELECTRICAL SPECIFICATIONS:. - mains voltage:380 V - mains frequency:50 Hz Technical description : Blank Pallet Turnover Device / Blank Handlling (needs retrofit)

Technical data: Kreuzmayr Obsttrockenschrank OTS 22, 22 m² surface dry, electrically heated, with temperature and humidity control power 7.5 of kW, full stainless steel for drying fruits, vegetables, meat,... Condition: new (Errors and omissions in the technical data, information and prices and subject to prior sale.)

Wood drying chamber Bollmann L x W x H outside: 11.0 x 3,0 x 2,7 m Stack dimensions B x H: 1.5 x 2.0 m Weight approx. 2000 kg Built in 1982 The wood drying chamber is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Manufacturer: Secotherm, Year: 2000, Control: Secotronik BM, Number of chambers: 9, Fans per chamber: 1-3: five ventilators, 3-9: two ventilators, kW-Leistung pro Ventilator: 3, Gross chamber volume m³: 1524,6, Kammervolumen mit Holz : ca. 945, net m³: ca. 378, Heated by: Water, Temperature °C: 92-110, System dismantled: yes, Space required: 55x8 = 440 m2, Year :2000

Vacuum dryer model KVT 200, WW heated, length 6m, diameter 1400, little run with slide-in trolley, year of construction 1989

The pass-through dryer is operational, the fans have been replaced with energy-saving ones.

Drying kiln of capacity of cu.m 80 INTERNAL DIMENSIONS 9000 x 7000 x h net 4100 mm nr. 6 Fans INVERTER for ventilation control Nominal range of each fan 30.000 m3/h Water heating fluid 90° C – At12 Humidification system by Nozzles at high nebulizing power Expelling Chimneys Control at 6 wood Probes Deflectors for air canalization

20-15- Timber drying kiln (new) Type CSD-HT-BR 70 Internal dimensions (width x depth x height) 7500 x 7160 x 4100 mm External dimensions (width x depth x height) 8080 x 7760 x 5500 mm The section of the structural columns of the chamber is 160 x 70 mm Snow load for the roof is 80 Kg/m2 Wind resistance of walls 27.8 m/sec Warming with glass wool Walls ǂ100mm Roof ǂ100mm Door ǂ100mm Door: sliding type, hung on a rail Wood for drying: various Loading the drying chamber with a forklift The heating system is gas Fuel - GPL gas Maximum thermal energy (300 kW) Maximum chamber temperature 75 °C The number of fans in the chamber is 5x3kw The total capacity of the fans is 162,500 m3/hour Number of probes: 4 HT/ 8 AWM/ 2 EMC/ 2 Temperature Voltage 400 V 50 Hz Total power 17kw)

Drying container WISSMATEC Continuous dryer Drying system Year of construction 2024 Drying floor with slotted bridge sheets Hydraulic moving floor Outlet opening at the rear Filling and exhaust air opening at the top Drying capacity is dependent of material Material Material moisture

Cat.-Nr. 08-1210 in a very good condition with flat bottom Measurements: Width: 4600 mm Depth: 5800 mm Height: 4350 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Cat.-Nr. 08-1209 in a very good condition with Flat Bottom Volume: approx. 25.000 Litre / Chamber Measurements: Width: 4600 mm Depth: 5800 mm Height: 4350 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Height 3000 Width 1400 mm Length 3500 mm Voltage Electrical: 400V 50Hz 3N Main material Stainlees Steel Smokehouse Version Electrical Smokegenerator type Detached, woodchips Trolleys per batch 3 pc Smokehouse functions: Drying and smoking Smokehouse function Brewing Smokehouse function Ventilation

Electric heating: 48 KW Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper Cleaning: foam cleaning Smoke feeding: integrated indoor of the chamber, friction generator Smoking material: wood Without the after-burning system Installation dimensions of the machine in cm: Width: 160 Length: 250 Height: 250 Trolley dimensions in cm: 100*100*200 height Delivery time: 30 working days after advanced payment

Smoke house BASTRA Dimensions: 175x120x220cm Power: 18 KW