We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Technical data: Turning diameter over bed: 520 mm Turning diameter via support: 310 mm Turning length: 1000 mm Circulation diameter in recess: 580 mm Peak height: 250 mm Bed width: 410 mm Spindle bore: 62 mm Spindle flange: Camlock Gr. 8 Spindle speeds: 24: 9 - 1800 rpm Machine weight approx.: 2.75 t Space requirements approx.: 2.8 x 1.3 x 1.3 m Electrics 380 Volt: 32A Three-jaw lining: 315 mm Forkart Coolant device Measuring system: Glasstab 0.005mm resolution on all 3 axes Quick-release steel holder " Multifix ": C
used
Center height: 0 mm Center distance: 400 mm Spindle bore: 0 mm Make Schaerer 112 Type UDA 1120 x 4 Year 70 er Conventionel lathe Centre height (mm)Swing = 1.120 Center distance (mm) DBC = 4.000 Spindle bore 4 chuck 1.000 Conical turn attachment
used
Lathe Manufacturer: Schaerer Model: UN 200 Center distance: 1600mm
used
turning diameter over bed: 520 mm turning diameter over slide rest: 310 mm turning length: 2500 mm total power requirement: . kW weight of the machine ca.: 4 t dimensions of the machine ca.: . m The technical Data are manufacturer or operator information and are therefore non-binding. We reserve the right to make an interim sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in the warehouse Over 8500 m² of storage space, crane capacity 70 tons More than 1000 items Accessories for your workshop If you want to sell machines, production lines or your company, then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Ref. -No.: 10258 Manufacturer: SCHAERER Type of control: Konventionell Storage location: Halberstadt Country of origin: Germany Lining: Forkardt F315 Brand Machine length: 3.800 mm Machine width: 1.300 mm Machine Height: 1.500 mm Weight Of The Machine Ca.: 4 t Tool holder type: Multifix Typ C Turning Length: 1.800 mm Turning Diameter Over Bed: 520 mm Turning Diameter Over Slide Rest: 320 mm Spindle Bore: 62 mm Bezel diameter (inside): 270 mm Hole in the jaw chuck: 84 x 120 mm
used
turning diameter over bed: 560 mm turning diameter over slide rest: 310 mm turning length: 1700 mm turning diameter in the gap: 610 x 250 mm turning speeds: 9 - 1800 U/min centre height: 280 mm spindle bore: 72 mm total power requirement: 15 kW weight of the machine ca.: 5,5 t dimensions of the machine ca.: 4,0 x 1,6 x 1,75 m Lead and pull spindle lathe - Rapid traverse - Forkardt 3-jaw chuck 315mm - Multifix steel holder - Copy facility - 1 pc bezel - Coolant system - Machine light - chip tray - Feed protection - Operating manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Offer 24086 Technical data approx.: - Max. turning diameter over bed Ø 650 mm - via face carriage Ø 550 mm - Tip height above bed 350 mm - Center distance 2500 mm - Spindle bore 60 mm - Spindle speeds 7.8 - 400 rpm - Longitudinal / flat feeds -Tailstock - Quick-release steel bracket with 7 inserts -Lunette - Face plate 620 mm - Drive 400 V - Space requirement approx. W 4700 x H 1450 x D 1400 mm - Weight approx. 4200 kg
used
Description: Lead and pull spindle lathe - Rapid traverse - Forkardt 3-jaw chuck 315mm - Multifix steel holder - Copy facility - 1 pc bezel - Coolant system - Machine light - chip tray - Feed protection - Operating manual Turning diameter over bed 560 mm Turning diameter over support 310 mm Turning length 1700 mm Turning diameter in the offset 610 x 250 mm Speed 9 - 1800 rpm Center height 280 mm Spindle bore 72 mm Total power requirement 15 kW Machine weight approx. 5.5 t Space requirement approx. 4.0 x 1.6 x 1.75 m Approx. Onsite Dimension. (l x w x h): 4,000 x 1,600 x 1,750 mm, weight approx.: 5,500 kg
used
turning diameter: 0 mm turning length: 3000 mm swing diameter over bed slide: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Lathe and various small parts Manufacturer: Eugene of white Type: DLNE Year of construction: 1954 Top width: 2000 mm Bed width: 380 mm Bed length: 3410 mm Outer dimensions: 3,850 x 1,020 x 1.135 mm Net weight: approx. 2500 kg maximum speed: 935 RPM maximum speed faceplate: 710 RPM Tour is possible upon request.
new
Cooling pump for SN 71 C Trens lathe
used
Weiler Nachlathe (could be a hamlet FDU260) Converted with speed switching for thread cutting incl. hand lever cross support
used
Lathe Manafacture: MICM Type: SNA170X2000 Case size: 4000 x 1700 x 1800 mm The turning diameter above the bed is 710 mm Distance between centers 2000 mm Spindle bore 82 mm Spindle speed 8-1250 rpm
used
Key data: 500 mm, 240 mm, 1500 mm
ZMM CU 502 - Universal lathe - Center height: 250mm - Distance between centers: 1500 mm - Swivel Ø above the bed: 500 mm - Swivel Ø above the carriage: 240 mm - Spindle bore: 72 mm - Spindle speed: 16 - 2000 rpm (18 steps) - Engine power: 10 kW - Operating voltage: 400 V / 15 - 25 A - Dimensions WxHxD: 3100 x 1400x x 1250 mm - Weight: approx. 3120 kg
used
Key data: 220 mm, 340 mm, 1500 mm
Lathe with removable bed
used
Key data: 220 mm, 340 mm, 1500 mm
With removable bed
used
Key data: 120 mm, 60 mm, 1000 mm
Voest lathe in very good condition. Enormous amount of spare parts and additional parts included. Delivery possible immediately.
used
Top height: 200mm Weight: 1400kg Speed series: 22.4-1000 rpm 4kW three-phase motor Colour: green according to RAL 6011 Accessories: - Multifix steel bracket - Three-jaw lining -Etc. All accessories of the lathe are included at no extra charge. Invoices and operating instructions are available and will be handed over at the time of sale. The machine should be inspected on site, which is why a detailed description is not required. On request, more pictures of the lathe can be sent. The machine was still in use until six months ago.
new
VakkuCar3 Bench Planer Modern mobile workstation with vacuum clamping device and height adjustment. Make your workplace on your workpiece. Vacuum flat suction; d = 190 mm Flat suction pad 250 mm x 80 mm Flat suction 240 mm x 45 mm built-in socket for auxiliary equipment Size 1800 x 800 mm Height-adjustable 874-1074 mm G & FE-VAKUUCAR-3 Extras: Swing frame, additional cleaner, vise, Extensions Drawers & BAR-BV-08-74 Accessory tray G & BAR-BV-08-78
used
Counter-steering machines Boley, partly incomplete
used
3 re-lathes, see pictures
used
Lincoln Idealarc DC 400 Welding Machine, Welding Funnel Built in 1993 4 pieces in stock Price per piece 750 Euro net
used
Microbiological protection and PCR cabinet with vertical air flow General characteristics Vertical hood with laminar flow, Class 100 is used for handling different samples in a sterile environment without turbulence and without impurities in the working room. Protects the work area both against microorganisms and other air contaminants, chemically toxic vapors and unpleasant odors, .. etc. Automatic electronic monitoring system controls all functions and all safety alarms of the system according to EU norms offers many working possibilities: 1) Overpressure system: part of the sterile air is evacuated through the front opening. 2) Pressure lowering system: part of the filtered air is evacuated while the outside air is partially brought inside creating a protective barrier without affecting the laminar flow. Protection of personnel and the environment, but can also be used for work ...
used
Cytotocix safety cabinet for personnel and product protection.
used
Nuaire NU-440-600E fume hood The Nuaire 440-600 is ergonomically designed for user comfort and offers users more knee room. The Nuaire 440-600 has a unique sealed construction and a True Laminar AirFlow HEPA filtration system. The 440-600 biosafety cabinet features the advanced AirFlow Control Electronic System with precise programmable control for a safe, reliable environment. Specifications: Voltage: 230V, 50Hz Current: 11A Downflow 38 M/S Inflow: 46 M/S Inclusive: -2x 230 volt socket -Fluorescent lamps External dimensions (W) x (D) x (H): 200 x 85 x 150cm Item condition: used More items - new and used - can be found in our shop! International shipping costs on request!