used SANDT Swing arm presses

Machine No. ST139K-53845, printing capacity 12 t, max. 60 mm stroke, table approx. 920 x 470 mm, stoessel approx. 560 x 350 mm, right exit switch disassembled, non-functional

Electrics outdated

Swivel arm punch Sandt, pressure capacity 25 tons

Cutting force: 200kN, working width: 2500mm, cylinder width: 2600mm, cylinder diameter: 400mm, opening between the cylinders: 25-100mm, conveying speed: 11-44m/min, connected load: 7.5kW, weight: 3t, with documentation.

Hydraulic flat steel shears make SANDT type 426 - 72789Fabr. -No: 808407Technical specifications:Knife length: 80 mmcuts steel up to approx: 80 x 6 mmTable size: 350 x 300 mmelectrical connection: 380 V 50 HzExternal dimensions Scissors L x W x H: 200 x 200 x 350 mmOverall dimensions with base and hydraulics: 450 x 360 x 1400 mmWith- Hydraulic compact unit HAWE HC4 / 4,3xa0xa0 1.5 kW, 4.3 l / min, 380 bar- Foot operationused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic bending machine manufactured by SANDTTechnical specifications:Table size 1200 x 600 mmWidth tool 70 mmPressure at 150 bar approx. 20 t (calculated)External dimensions L x W x H 1200 x 700 x 1300 mmWeight about 1200 kgHydraulic oil content 60 lused in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Swing-arm robot with base (table) manufacturer: Bosch type: Turbo SCARA SR6 Year of construction: 1999 .

Workplace equipment, swivel bracket for device holders, monorail ceiling system for device holders, mounting arm, mounting gallows, swivel arm, wall swivel bracket -Manufacturer: ZascheSwivel boom: Type WSK-45/6.0 -Outreach: 6010 mm -Load capacity: 45 kg -Dimension: 6140/215/H700 mm -Total weight: 162 kg

Swivel Arm Vertical Grinding Machine DELTA Type LB 300 Swivel Arm Grinding Machine Fabr. No.: 0495 Year of construction 2004 Grinding range 330 x 140 mm Magnet 250 x 150 mm Grinding height Grinding wheel - magnet approx. 220 mm Grinding height Grinding wheel - clamping surface approx. 280 mm Center of center of column to center of spindle 300mm Grinding wheel diameter 178 mm Fine adjustment 0.01 mm Grinding wheel speed 2840 rpm. Motor power 2.2 kW Mains connection 380 volts, 50 Hz - Depth adjustment via handwheel on the right side of the spindle housing, fine adjustment via knurled wheel on the handwheel - mechanical magnet 250 x 150 mm, overall height 63 mm (grinding height without magnet approx. 280 mm) - Wet grinding device in the machine base - Dressing diamond for swivelling in Space requirement L x W x H 850 x 800 x 1630 mm Weight 380 kg very good condition; used

Swivel Arm Vertical Grinding Machine DELTA Type LB 300 Swivel Arm Grinding Machine Fabr. No.: 0495 Year of construction 2004 Grinding range 330 x 140 mm Magnet 250 x 150 mm Grinding height Grinding wheel - magnet approx. 220 mm Grinding height Grinding wheel - clamping surface approx. 280 mm Center of center of column to center of spindle 300mm Grinding wheel diameter 178 mm Fine adjustment 0.01 mm Grinding wheel speed 2840 rpm. Motor power 2.2 kW Mains connection 380 volts, 50 Hz - Depth adjustment via handwheel on the right side of the spindle housing, fine adjustment via knurled wheel on the handwheel - mechanical magnet 250 x 150 mm, overall height 63 mm (grinding height without magnet approx. 280 mm) - Wet grinding device in the machine base - Dressing diamond for swivelling in Space requirement L x W x H 850 x 800 x 1630 mm Weight 380 kg very good condition; used

Swing mill for iron-free grinding or micronizing of chisels (solid sum content 70 - 78%), grinding chamber lined rubber, drive 22 kW. Task size: Up to 5 mm; final fineness: 4 microns. Last used grinding body: 7.5 to. Cylpebs, 20 mm x 20 mm (not included).

Swing boom crane boom crane with ZYBA-MAT Manufacturer: Strödter Type: ZP 60 / SAZ 60 D1 Built: 2014 New and unused Load capacity permissible load weight max: 25 kg Working radius approx.: 3,000 mm Stroke max: 800 mm Lifting speed max. : approx. 800mm/sec. Energy supply: pneumatic Mounting: Swing boom with stand column Net weight device (with load-carrying equipment): 287 kg Pneumatic working pressure: 6 bar Air quality required for maximum load-bearing capacity: clean, dry and filtered (5 microns) Air consumption max.: approx. 17 Nl/ double stroke ZYBA-MAT on the swivel boom Pneumatic balancing control with automatic scale

8 piece elements with ROeHMHELD swivel clamps, for conversions etc. further: 4 piece detto

Max. workpiece thickness: 20mm, including one unused and originally packed set of blades.

Bottle format: 0.33l Steinie, throughput: 12,000 bottles/h, number of capping stations: 14, control system: Siemens SIMATIC PANEL, on-site inspection is possible.

Wall swivel crane make STAHL type PW 125 kgMachine -No: 68543/12011 built in 1994Capacity: 125 kgProjection: 4000 mmProfile size: 125 x 60 mmWith- wall console- Roller chassis- without hoistsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Wall swivel crane make STAHL type PW 125 kgMachine -No: 69840 built in 1994Capacity: 125 kgProjection: 4000 mmProfile size: 125 x 60 mmWith- wall console- Roller chassis- without hoistsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Mobile workshop crane make FAV type 1475Fabr. -No: 109009 built in 1990Load capacity: 1.0 tPower with extended boom: 300 - 1000 kgExternal dimensions approx: 2000 x 1000 x 1500 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Wall jib crane make DEMAG with wall bracketTechnical specifications:Load capacity: 250 kgThroat: 5000 mmWith- KBK systemusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Motorized slewing crane make DEMAGTechnical specifications:Load capacity: 2000 kgOutrigger: 5000mmLifting height: 5000mmWith- Demak PK 10 electric chain hoistused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Swing stopper AMS Type: BVM 007 with 12 closing stations year of manufacturing: 2015, top condition Capacity: up to 10.000 bph

Overview The swing-top closing machine was manufactured by the Austrian manufacturer AMS in 2005. As the current owner has decided not to use swing-top closures anymore, this machine is for sale. Currently the machine is still installed in a brewery. Documentation is available. Tech Specs: Capacity: 12,000 bph Control: Siemens S7 Formats: 0,3 l 0,5 l Number of closing positions: 16 Documentation available

Swivel motor, hydraulic swivel motor ECKART CWK400 D NW50-180G EN-GJS-500-7 Shaft: Ø 30 / 15 mm Flange: Ø 140 / 110 mm spare part and a. for machining center HECKERT CWK400 D !, used ! Dimensions: 530 x 200 x 140 mm

Stirrup dial indicator FEINMESSZEUGFABRIK SUHL Range: 30 - 40 mm with protective box Dimensions: 190 x 135 x 40 mm

Steel cabinet with swing-in doors, tool cabinet ANDREAS KARL FAHRENZHAUSEN 890 x 450 x 950 mm (usable dimensions) 2 doors: 510 x 970 mm 2 x shelf: 930 x 450 mm (height adjustable) without locking mechanism ! used, tested ! Dimensions: 1100 x 530 x 1130 mm