We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
SAMCO Unilev N15 Edge Grinder Two-speed sanding belt Pneumatic oscillation Adjustable table at an angle of 0-45 Sanding belt height 150mm Snap for curvilinear elements Sanding belt 2160x150mm Extraction nozzle 120mm Motor power: 3kw
used
Samco Unilev 15 Edge Sander Belt dimensions 150 x 2170 mm Two belt speeds Adjustable shoe Both countertops adjustable at 0-30 degrees Adjustable grinding height Attachment for curved linear elements Pneumatic tensioning of sanding belt
used
Used milling machine Int. Art. Ref. m3458 Manafacture: SAMCO Type ROUTER Projection 500 mm Speeds 10,000-20,000 rpm. Power 1.5/2.2 kW Vertical running of the spindle 80 mm Höhenverst. of the table 150 mm Weight approx. 210 kg Pneumatic cables are new Electrics checked, connection cable new Location: 95233 Helmbrechts The machine can be viewed and tried out under power. We will be happy to send you more photos by e-mail. A forklift for loading is available. We reserve the right to make an intermediate sale. It is possible to expertly examine the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty / guarantee is ex ...
used
Voltage: 230V, weight: 230kg.
used
SPECIFICATIONS: Horizontal belt grinding machine Table width mm: 800 Table length mm: 2,900 Sanding belt width mm: 1,500 Sanding belt length mm: 8,000 Maximum working height mm: 600 Power of the main engine HP: 4 With sanding shoe
used
Sliding table saw Fabr. Samco Model. Formula S2 Year: 1999 with Voritze with table spread with table publisher Motor 5.5 Kw Carriage 3200 mm with motor brake
used
Manufacturer: Framar, Bauyeshr : 1992, Control: hand, Work stations: 1, Vertikal moulding unit: yes, Motor Kw: 3, Travel top to down mm: 120, Travel longitudinal mm: 275, Max door width mm: 1000, Max. mortise hole dimensions L X W X D mm: 20 X 75 X 110, Min. mortise hole dimensions L X W X D mm: 2 X 20 X 35, Automatic clamping system: yes, Incl. stopper system: yes, Trench deepth max mm: 110, Lifting device: yes, Wight approx. kg: 900, Year :1992
used
Frezarka górnowrzecionowa Samco ROUTER Spindle distance from arm 800 mm Spindle driving motor 3/2.2 kw Two spindle speeds 9000/18000 RPM Spindle tilt angle adjustment 45-045 degree Height-adjustable table Spindle control pneumatically from the pedal Worktop size 800×600 mm
used
Code: 0267 Brand: SAMCO Model: RP/2 Automatic bevelling machine for wooden shutter pallets Bilateral bevelling of blind slats Max workpiece size mm 750 Min workpiece size mm 140 Operating speed approx 1800 slats/hour Working pressure 8 kg/cm2 Slats loader Weight kg 170
used
Welding edge former, edge former, edge chamfering machine TRUMPF chamfers of steel plates for weld seam preparation type TKF 103 Sheet thickness: 4 - 25 mm Bevel length max: 10mm Bevel angle: 30 Power: 2000 Watt Mains connection: 220 Volt, 50 Hz - equipped with guide bracket for 30 bevel angles - regrindable butt steel for high tool utilization - several impact steels - Support plates 6, 8, 10, 12, 14, 16, 18, 20, 22 mm for different material thicknesses For bevelling straight and curved edges with at least 40 mm radius. For bevelling edges on flat and curved workpieces as well as tubes with an inner diameter of at least 80 mm. Weight: 14 kg; used
used
Edge magazine for edge banders -Spaces for edges: 5 pieces -Max. Edge width: 60 mm -freestanding -Dimensions: 900/530/H1030 mm -Weight: 208 kg
used
Edge closure for edge banders, edge banding machines -Manufacturer: Homag -for: 2x different edges -Number: 1x edge closure available -Price: per piece -Dimensions: 670/360/H350 mm -Weight: 43 kg/piece
used
Weld edge former INDUMASCH SIEGEN Type V 12 Masch. No.: 50674 Year of construction 1992 Material thickness max. 40 mm Bevel angle 45 Working speed approx. 3 m/min. Motor power 2 kW Mains connection 400 volts, 50 Hz - Flow / return - Built-in guide roller for bevel angle 45 - Belt guard missing Dimensions L x W x H 650 x 600 x 650 mm Weight 75 kg good condition; used
new
Work table: 750 x 290 mm, table height: 185 mm band length: 2600 mm strap width: 150 mm abrasive belt rear: 850 x 200 mm grinding unit swiveling: 90°-45° belt speed: 20 m / sec. Additional table: 330 x 330 mm oscillation stroke: 20 mm Oszilationsmotor: 0.25 (0.34 kW) suction connection Ø: 120 mm motor power output S1 100%: 3.0 kW (4,0 PS) motor power S6 40%: 4,5 kW (6.0 HP) voltage: 400 V machine dimensions (W x D x H): 1700 x 700 x 1080 mm weight approx.: 180 kg
used
Universal cylindrical grinding machine Incl. internal grinding deviceTip height: 160 mm. Grinding length: approx. 500 mm. Headstock holder: MK 4 Coolant system, various grinding wheels and documentation. Unfortunately without a tailstock. Dimensions, LxDxH: approx. 1800 x 1200 x 1700 mm. Weight: approx. 2000 Kg. Neat ready for use condition. The machine can be inspected and demonstrated under power by arrangement and is immediately available.
used
Edges and facets grinding machine. Grinding angle: 45 degrees. Support table area: 100 x 320 mm Power supply: 380 Vol, 16 Amp. Incl. substructure with dust extraction, the extraction hose is unfortunately missing., 2 pieces of new compartments - sanding pad, diameter: 165 mm. Working height: approx. 105 cm. Weight: approx. 80 kg. Good operational condition. The machine can be inspected and demonstrated under power by arrangement and is immediately available.
used
- Exhibition machine - relief rollers on the stop rulers, with swivel grinding unit, and oscillating sanding belt, veneer grinding device, oscillation with separate motor, height-adjustable sanding table, extendable roller table extension, rubberized sanding roller ---------- Technical data ---------- sanding belt dimensions: 3,000 x 200 mm, work table dimensions: 960 x 350 mm, work table height adjustment: 230 mm, Grinding surface: 1,050 x 300 mm, belt speed: 20 m/sec., oscillation stroke: 20 mm, extraction nozzle: 140 mm, motor 400 V: 4.0 hp / 3.0 kW, dimensions (LxWxH): 1,900 x 900 x 1,350 mm, weight: 290 kg new exhibition machine
used
- Exhibition machine - with swivel grinding unit, and oscillating sanding belt ---------- Technical Data ---------- Swivel range of grinding unit: 45 , Sanding belt width: 150 mm, Sanding belt length: 2,600 mm, Work table dimensions: 750 x 300 mm, Height adjustment range: 200 mm, Belt speed: 20 m/sec., Oscillation stroke: 20 mm, Suction nozzle: 140 mm, Motor 400 V: 4.0 hp / 3.0 kW, Motor oscillation: 0.34 hp / 0.25 kW, Dimensions (LxWxH): 1,600 x 850 x 1,350 mm, weight: 215 kg - Special price - new exhibition machine
used
equipped with: -2 milling units -1 long belt sanding unit -3 buffing units/profile grinding units
used
Max. glass dimensions: 2000x3000mm, number of spindles: 8, glass thickness: 3-28mm, length: 6500mm, width: 1600mm, height: 2600mm, weight: 3.2t.
used
Edge grinding machine with rinsing device, wet grinding machine PAGUS grinding wheel: Ø 200 mm grinding wheel height adjustable, travel: 50 mm grinding angle: 45° grinding table pneumatically movable, travel: 630 mm motor: VEM K21R80K2 0,75 kW 2795 - 2895 rpm 230 / 400 V used, tested ! Dimensions: 1500 x 1000 x 1560 mm
used
Oscillation: ja ja / nein : ja ja/nein : ja ja/nein tiltable up to: Grad Motor output: 3,0 kW Table dimensions: mm sanding width: 200 mm Weight: 290 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Profile edge grinding and milling machine, edge grinding machine, edge grinder, grinding machine -with: copier -Number: 1x grinding head -Power: 1.1 kW -Speed: 500-1500 rpm -Sanding head in thickness: adjustable -Max. Workpiece thickness: mm -Max. Corner radius: mm -Dimensions: 1200/1420/H1520 mm -Weight: 656 kg
used
Profile edge grinding and milling machine, edge grinding machine, edge grinder, grinding machine -with copier -2x: milling heads -Power: 1.5 kW -Speed: 3000-6000 rpm -1x: grinding head -Power: 1.1 kW -Speed: 500-1500 rpm -Milling and grinding heads in thickness: adjustable -Max. Workpiece thickness: 40 mm -Max. Corner radius: 40 mm -Dimensions: 1200/1600/H1520 mm -Weight: 782 kg
used
Description: Technical details x-travel 250 - 500 mm Sheet thickness 2 mm Workpiece width 0 - 3 mm Approx. Onsite Dimension. (l x w x h): 800 x 500 x 1,400 mm, weight approx.: 150 kg