1000 offers

maximum number of results exceeded > 1000
please refine your search

New in: 2017
Price: request quote
Location: Land-pt PT 1800- Lisboa, Av. Marechal Gomes da Costa nº 35
Seller: Prosecore S.A.

Automatic Continuous baking oven – for fully automatic production of wafer sheets (refurbished) with 18 cooking plates/baking tongs. Plates dimension: 230 mm x 290 mm Main drive with frequency- controlled three phase drive system 2 burners (Krom Schroder model ZKIH) with complete piping (forced fresh air and gas), cutting and mixing valves, gas inlet Krom Schroder with all accessories (filter, pressure gauge, safety valves, governor for gas, gas solenoid valves) . Heating: Natural gas or LPG (propane/butane) Control Cabinet in conformity with CE normative Production of wafer: considering an out-put of 30 cycles/hour, anda cooking time of 2 min/each plate, the hourly production of  ... more

New in: 2008
Price: used machinery auction RESALE 12.800 €
Location: Land-de DE Germany, 42929 Wermelskirchen
Seller: Surplex GmbH

Weight approx.: 6500 kg Dimensions (l x w x h) approx.: 3000 x 1600 x 2800 mm Description: TOP gas forklift from LINDE with 10518 operating hours Standard lifting frame 3800 mm lifting height, Height 2800 mm, Super elastic tyres Raised full cabin with heating, Safety light more

New in: used
Price: request quote
Location: Land-de DE 90559 Oberferrieden, Am Espen 7
Seller: Prime Catch Seafood GmbH

hot-dip galvanized steel cabinets for the storage of chemicals (cleaning) The special feature of these containers is a. non-rusting (can be used also outdoors) and the b. storage grid over a c. tray, as well as the Bcbc9eew d. lockable front doors. more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

max. 15 kg flour/ 24 kg dough, 2 speeds, timer,\r\nstainless steel bowl + spiral, safety device more

New in: used
Price: request quote
Location: Land-de DE 90559 Oberferrieden, Am Espen 7
Seller: Prime Catch Seafood GmbH

CA 100 piece production sinks made of hard plastic grey â?¬ 50-- To the extent of a euro pallet 80 cm in width and 120 cm in length. The bath can be recorded with a lift truck or forklift truck and stacked. Each tray can hold approximately 500 kg product and is food-safe and Kühlhausgeeignet. more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

max. 80 kg dough, 2 speeds, 2 timers\r\nstainless steel bowl, safety device\r\n more

New in: 2006
Price: 6.000 €
Location: Land-ro RO 41022 Oradea, Calea Aradului, no. 23/39
Seller: Kuhn & Partner Romania SRL

Description Brand Dadaux Model Titan CUT 45 V ID 7258 Status Active Price 6.000 € + VAT Year of manufacture 2006 Location Oradea (RO) Bowl cutter Dadaux Titan CUT 45 V manufactured in 2006 with stainless steel body, 6 knives, IP 54, 2 speeds, bowl capacity: 40 liters, bolt rotation speed: 8 or 16 turns / minute, engine power: 0.5 kW . Knife rotation speed: 1000 or 3600 rpm, knife motor power: 5.8 kW. Dimensions (L x W x H): 1044 x 879 x 1071 mm. Weight: 380 kg. Three-phase current. The bowl is produced using a special process which melts down stainless steel to a thickness of 1-2cm, to produce a single non jointed bowl. The chopping head comprises of six knives which can easil ... more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

sizes from 5 kg dough/7 ltr. until 60 kg/75 ltr.\r\n1 speed (optional with 2 speeds), white painted steel body, bowl + spiral + dough deflector + safety rack made of stainless steel\r\nbowl is counterrotating (optional with removable bowl)\r\nchain drive, self-oiling step-down-gear more

New in: new
Price: 4.980 €
Location: Land-de DE
Seller: Czech Industrie Service

Tip height: 150 mm Top width: 750 mm Umlaufdurchm. ü. bed: 300 mm Umlaufdurchm. altitude support: 178 mm Umlaufdurchm. in the offset: 430 mm Spindle bore: 38 mm Speed range: 50-1810 UpM Traverse path x 130 mm Stroke Z: 560 mm ZO stroke: 75 mm Longitudinal feeds: 0,052-1,392 mm / Rev Plan feeds: 0.014 - 0.38 mm / Rev metric thread: 0,4-7 mm Inch thread: 4-56 TPi Tailstock Quill recording: MK 3 Quill stroke: 100 mm Total power: 1.1 / 1.5 KW / 400 V Machine weight: 500 kg Machine dimensions: 1590 x 750 x 1270 mm Equipment / Accessories: 3 axis digital display - CPL. mounted electro-mechanically braked main spindle Safety relay 3 - jaw Chuck 160 mm 4 - jaw chucks Chu ... more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

max. 100 kg flour, approx. 150 kg dough\r\n2 speeds, 2 timers, safety device\r\n more

New in: new
Price: request quote
Location: Land-de DE 49078 Osnabrück, Hörner Weg 99
Seller: Markus Klanke Entsorgungssysteme

For the columns and crushing of wrapped paper, cardboard or plastic rollers on core. Engine power 7, 5kW 16Ampere control PLC supported with two-hand safety control - key-operated switch - emergency off pull cord - cutting force 30 to - speed ca. 17, 3 mm / sec - cutting Canal to process roles of maximum roll length approx. 1500 mm max roles dur diameter approx. 800mm - weight of the machine ca. 2900 kg - noise <80dB(A) - hydraulic pressure 200 bar - tank capacity 90Liter - hand guards machine available now Subject to prior sale Price and further details on request more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

max. 50 kg flour, 2 speeds, timers\r\ndigital instruments, 2 stainless steel bowls,\r\ndoughhook stainless steel, safety device, \r\n more

New in: 2016
Price: 9.950 €
Location: Land-de DE 72419 Neufra
Seller: Alexander von Westernhagen

Reverse loading lift table, 2 to 3 x 2 m, galvanized version - new -: Price from site: â?¬9.950.-(net)! Manufacturer: Hymo (H + M pallet GmbH) Type: LX20-16/20/1-M Year of constr.: 2016 - reverse loading lift table but never built former price: â?¬ 15.000.-(net) Condition: New Available: available now Location: 72419 Neufra Reverse loading lift table - lifting table category 4 in accordance with EN1570-1 Technical data: Load capacity: 2000 kg Stroke: 1600 mm Height: 305 mm => plus 10 mm (item 3) Platform length: 3000 mm Platform width: 2000 mm Lifting / lowering time (ever): 37 sec Engine performance (S3 - 20% ED): 2.86 kW Operating voltage:  ... more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

max. 50 kg flour, 2 speeds, 2 timers\r\nstainless steel bowl + spiral, safety device\r\n more

New in: 1996
Price: request quote
Location: Land-de DE 93073 Neutraubling, Berliner Straße 31
Seller: ecomac Gebrauchtmaschinen GmbH

Capacity: 60 pallets/h Equipment: Euro-and industrial pallet - short-side leading more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

max. 30 kg flour, 2 speeds, timer\r\nstainless steel bowls + spiral, safety device more

New in: used
Price: request quote
Location: Land-de DE 89185 Hüttisheim, Hirschbach 5
Seller: Knoll Vpa

Completely obsolete in the sales order GUK folding apparatus FA21/4 Cartonac 81 / 91 4 folding plates. Feed table with side shift for Planoformate Max 215 x 320 mm Min. format 60 x 130 mm unfolded Performance 400 FS / min Optional: Indent center / left / right drive side right / left / investor table: 450-600 mm Round to cover optional Paper weight 50-80gr / m ² (single-layer), 37-50gr / m ² (multi-layer) Power requirement: 2,1KW, 400V 3 pH, 50 HZ Air consumption: 6bar / 15 l/min (for dowry soft or opt. Pneum. Marking device) Continuously adjustable AC drive for folding machine frequency inverter,. Motor protection switch for pressure vacuu ... more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

max. 120 kg dough, 2 speeds, 2 timers\r\nspiral + bowl stainless steel, safety device more

New in: 2001
Price: request quote
Location: Land-ch CH 9240 Uzwil, Sternenstrasse 4
Seller: MJS-LINE GmbH

Format (cm): 66 Equipment / Additional information: Safety barriers, 1x reserve knife Program memory for 99 programs with safety inspection more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

max. 50 kg flour, 2 speeds, 2 timers\r\nstainless steel bowl + spiral, safety device\r\n more

New in: 1996
Price: request quote
Location: Land-de DE 45141 Essen, Kallenbergstr. 20
Seller: Hermann Sprenger GmbH

1 used Steam boiler --------------------------- Make: LOOS; Gunzenhausen Type: U-HD Heating surface approx. : 31 sqm Power max. : 2,000 kg/h höchstzul. Operating pressure: 10 bar higher test pressure: 18 bar Water content at NW CA : 1.740 l Water content fully CA : 2,480 l Year of construction: 1996 equipped with Weishaupt burners type G30/2-A,. Version ZM-NA, power 300-1,800 of kW, gas control line, separate control cabinet, Unwired, feed water pump, water level sight glass, safety valve, and steam and the existing coarse and fine fittings. more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

max. 180 kg dough, 2 speeds, 2 timers\r\ninclude 2 moveable bowls stainless steel\r\nsafety device more

New in: 2002
Price: request quote
Location: Land-de DE 74243 Langenbrettach, Bössingerstr. 24
Seller: imc solutions GmbH

TECHNICAL DATA: KN press force of 2,300 Bending length 3,060 mm Free stand passage 2.690 mm Stroke 365 mm Control Delem DA 69 Trailing stop system 6-axes Backgauge/axes STANDARD EQUIPMENT: -Stable machine frame as a welded construction in all-steel construction -Pressure bar with high flexural strength -Electro-hydraulic top drive proportional valves -Modern block hydraulic -CNC back gauge with Rack-Pinion drive, for X - and R axes, risk free move the stop fingers from the front -Upper tool recording system "Modufix", manual Substation stuff for EV matrices, KIemmung manual, shift can be programmed -2D-Grafiksteuerung Delem DA 69 TS with 12 "-grayscale scr ... more

New in: used
Price: request quote
Location: Land-DE Germany, 47652 Weeze
Seller: Thünnesen GmbH

max. 125 kg flour, 2 speeds, 2 timers\r\nstainless steel bowl, safety device\r\n more

New in: used
Price: request quote
Location: Land-es ES 0 LORQUI (Murcia), C/CONDOMINA S/N
Seller: INTER-MAQUINAS AGUILAR S.L

Filling machine with two heads, automatic and equipped with an electronic meter. The ECOFILL HT2 is a bottler of last generation, fast, accurate and easy handling with boot, unplugging, empty air, filling, nitrogen injection, capping and automatic expulsion. The operator position holding a bag and the packaging machine thanks to their detectors and safety bars will know that it is charged and automatically start the packaging cycle, while the first head is filling the operator will charge the second head of so that when the first finished the second will activate the filling without delay. Structure in stainless steel. Its electronic and pneumatic components provide you with maximum reliabil ... more

New in: 2018
Price: request quote
Location: Werk
Seller: Sperling Werkzeugmaschinen

sheet width: 1300 mm plate thickness: 1,5 mm roll diameter: 75 mm min. dia.: 85 mm engine output: 0,75 kW weight of the machine ca.: 420 kg Electric roller. Foot control. Heavy duty welded robust construction. Back roller can be adjusted for conical bending. Upper roller can be turned away for easy removal of the work piece. Comfortable operation and both hands free. For workshops and handicraft. with foot pedal (forward, backward) made of cast iron back roller adjustable by hand wheel lower roller adjustable by handle, eccentric safety cord with emergency stop more

New in: used
Price: request quote
Location: Land-de DE 89185 Hüttisheim, Hirschbach 5
Seller: Knoll Vpa

Stand alone with dandruff removal Folding apparatus FA21/4 S2 SVA 730 Cartonac 81 with substructure 4 folding plates. Feed table with side shift for Planoformate Max 215 x 450 mm Min. format 60 x 130 mm unfolded Suspension device for display, Levelling feet adjustable in height, Cabinet recording left,. to accommodate folding machine, pump and drive, with 400V / 3 PH drive motor pressure vacuum pump and electrics Unfolded min. format: 60 x 15 mm Optional: Maximum format of unfolded: 215 x 450 mm paper weight 50-80gr / m ² (single-layer), 37-50gr / m ² (multi-layer) Space requirements. 1, 20m x 1, 40m Power requirement: 2,1KW, 400V 3 pH, 50 HZ Air ... more

New in: used
Price: used machinery auction RESALE 300 €
Location: Land-it IT Italy, 24033 Calusco Dadda (BG)
Seller: Surplex GmbH

Weight approx.: 350 kg Dimensions (l x w x h) approx.: 1000 x 700 x 1000 mm Description: Without combination, unknown content more

New in: 1999
Price: request quote
Location: Land-de DE 73525 Schwäbisch Gmünd , Eutighofer Str. 144a
Seller: IDS Trade GmbH

Technical data Robot KUKA VK360 Control: VRS1b BJ. 1999 Load capacity: 125kg Range: 2410mm 32 digital inputs 32 digital outputs 2 analog outputs Positioner with 3 axles the positioning of the component Diameter table top: 600 mm Load capacity: 500kg Pulse welding machine Saprom S8 robot burner ABICOR Lorch and shut-off box ABICOR CAT Technical data positioner -Number of axles: 3 (2 x Pan / 1 x turning) -Positioning plate diameter: 600 mm -Capacity (device + part): 500kg Technical data welding accessories and additional equipment -Pulse welding machine Lorch Saprom S8 -ABICOR robot burner: -Shut-off box ABICOR CAT -Safety light curtain for access protection -appro ... more

New in: 2005
Price: used machinery auction RESALE 720 €
Location: Land-es ES Spain, 45860 Villacañas
Seller: Surplex GmbH

Weight approx.: 900 kg Dimensions (l x w x h) approx.: 1300 x 1650 x 1550 mm Description: Serial number ZM 326, Maximum working width 800 mm, Maximum workpiece thickness 50 mm, Dimension of tool holder spindle 820 x ø60 mm, Spindle speed 4500 rpm, Maximum saw blade diameter approx. 230 mm, Electronically variable feed speed from 3 m/min up to 45 m/min, Feeding motor power 1.10 kw, Safety device to control the panels thickness more

New in: used
Price: request quote
Location: Land-de DE 57080 Siegen, Schubertstr. 42
Seller: Ralph Rosenthal Maschinenlager

Safe / valuables Cabinet of inter SicherheitsserviceDaten see pictures more

New in: 2004
Price: used machinery auction RESALE 550 €
Location: Land-fr FR France, 86240 ITEUIL
Seller: Surplex GmbH

Weight approx.: 1500 kg Dimensions (l x w x h) approx.: 4000 x 1600 x 2000 mm Description: Wrapping machine, Length: 3700 mm, Width: 3000 mm, Frequency: 50 Hz, Voltage: 380 V, Power consumption: 38 kW, Min pressure: 6 Atm, Welding bar: 900 mm, Max width coil: 900 mm, Max product height: 400 mm, Tunnel inlet dimensions: 900 x 450 (ht) mm, The machine is delivered with a manual self-retaining stop. The presence of an unknown object in the welding device or in the overload power supply unit, causes the machine to automatically brake by means of a safety microswitch. The welder has a Teflon coating and spring support. The main drive consists of a complete self-locking motor with an expandable sp ... more

New in: 2013
Price: request quote
Location: Land-de DE
Seller: MVRG UG (haftungsbeschränkt) & Co. KG.

Availability: as of now Replacement knife: 10 Discharge fleece gloves: approx. 10 Condition: well-kept High-precision transport roller without annular (blade roller) and spring mounted knife holder for very low losses of expensive discharge non-woven material Dynamic (counter current) stainless steel cleaning roller and NOCK air-jet compressed air cleaning system permanently keep the transport roller during operation. This always-reliable access, fast and easy work and very good industrial hygiene. Knife holder with captive screws Blade gap adjustment for products with thick Fleece (E.g. beef) pressure regulator adjustable Tank of sections from the front and from the rear suppliabl ... more

New in: 2007
Price: used machinery auction RESALE 40.000 €
Location: Land-it IT Italy, 35010 Santa Giustina in Colle
Seller: Surplex GmbH

Weight approx.: 8740 kg Dimensions (l x w x h) approx.: 11200 x 6500 x 2900 mm Description: Serial number 85737. Machining center for milling, drilling and edgebanding. Operating area 8000 mm x depth 1850 mm, with 12 suction cups supports, with 4 suction cups each one. 6x area, 2 electrospindles with C axIs, HSK63F tool holder, 1 blade unit for grooves on x axis, 1 rotary blade unit 360°, blade Ø 270 mm, 1 drilling head with 12 bits on x axis and 10 bits on y axis. 3 heads horizontal drilling on x axis and 2 horizontal heads on y axis. Edgebanding unit for edges max height 55 mm for 4 slots-edges loader, 1x 22-slots tools loader. Comprehensive of 1 edge and glue scraping unit, 1 edge trimm ... more

New in: used
Price: request quote
Location: Land-nl NL 2681 Monster, VLOTLAAN 192
Seller: Hortimat

Maximum lifting capacity: 1300 kg Maximum lift height: 200 mm Dimensions: 1600 × 650 × 1250 mm (L x W x H) Fork dimensions: 1100 × 180 mm (L x W) Total width forks: 550 mm Power supply: 230 V, 1 phase, zero + earth, 50 Hz The pallet trucks EJE M13 have been specially developed for the internal transport of light goods. The 0.6 kW strong driving motor supports the transport of pallets and goods over short distances weighing up to 1,500 kg. That is why the EJE M13 are ideally suited for use in small and medium-sized companies where goods have to be transported occasionally. Thanks to maintenance-free and powerful AC-phase current technology, energy consumption is reduced and the  ... more

New in: used
Price: used machinery auction RESALE 250 €
Location: Land-es ES Spain, 45860 Villacañas
Seller: Surplex GmbH

Weight approx.: 80 kg Dimensions (l x w x h) approx.: 440 x 430 x 1720 mm Description: Pneumatically driven, Max. dimensions of barrel: height approx. 500 mm - diameter approx. 350 mm, With safety lock more

New in: 2016
Price: 3.900 €
Location: Land-de DE 57581 Katzwinkel, Sandstr. 22
Seller: Maschinendrehpunkt

WINTER under table saw CUTMAX 600 (as new!) -Cutting height 200 x 200 mm -Table size 1150 x 660 mm -Saw blades ø 600 mm -Engine 10 kW / 400 V -Speed 2400 RPM -Cutting speed is 40 cycles/min. -Compressed air connection 8 bar -Suction nozzle ø 120 mm -Safety two hand control -CE conformity -includes 1.5 m roll train left and right -Dimensions L = 1360,B = 900, H = 1450 mm -Weight 560 kg Year of build 2016 more

New in: used
Price: used machinery auction RESALE 50 €
Location: Land-it IT Italy, 35010 Santa Giustina in Colle
Seller: Surplex GmbH

Weight approx.: 15 kg Dimensions (l x w x h) approx.: 430 x 410 x 205 mm Description: . more

New in: 1993
Price: request quote
Location: Land-ch CH 9240 Uzwil, Sternenstrasse 4
Seller: MJS-LINE GmbH

Format (cm): 92 Equipment / Additional information: safety barrier, air table, 1xreserve knife Cutting height(mm): 920 Table depth(mm): 130 more

New in: used
Price: used machinery auction RESALE 40 €
Location: Land-it IT Italy, 35010 Santa Giustina in Colle
Seller: Surplex GmbH

Weight approx.: 20 kg Dimensions (l x w x h) approx.: 430 x 350 x 200 mm Description: . more

New in: 2006
Price: request quote
Location: Land-de DE 40764 Langenfeld, Schneiderstrasse 10
Seller: Maschinenhandel Borowski GmbH

used injection moulding machine ENGEL VICTORY 1800-260 Power warehouse no.: 502528 manufacturer: ENGEL Typ: VICTORY 1800-260 Power Controller Unit: EC100 A03 year of construction: 2006 operating hours: 42266 h technical data: Clamping unit type of drive: fully hydraulically clamping type: fully hydraulic method of construction: tie-bar-less clamping force: 2600 kN size of mould plates h: 1100 mm size of mould plates v: 1000 mm min. mould height: 400 mm max. open daylight: 1300 mm opening stroke: 900 mm ejector stroke: 200 mm ejector force: 90 kN mould weight: 3300 kg technical data:injection unit screw diameter: 70 mm swept volume: 1039 ccm injection pressure:  ... more

New in: 1991
Price: used machinery auction RESALE 2.000 €
Location: Land-de DE Germany, 87466 Oy-Mittelberg/Haslach
Seller: Surplex GmbH

Weight approx.: 2500 kg Dimensions (l x w x h) approx.: 2000 x 2100 x 1700 mm Description: Numeric controlled universal lathe, swing diameter over bed max. 360 mm, swing diameter over bed slide max. 220 mm, swing diameter max. (for collision free tool arrangement) 195 mm, slide path in X-direction max. 170 mm, slide path in Z-direction 350 mm, turret head 8 positions, holder VDI 3425/2, rapid traverse speed X- and Z-axis 10000 mm/min, tailstock with taper mounting MK 2, quill force 3000 N, quill stroke 80 mm, speed of rotating center 6000 rpm, output 5.5 kW, machine is equipped with a linear measuring system in the X-axis, safety couplings X- and Z-axis, repeatability X-axis 0.003 mm, Z-axis ... more

New in: 2000
Price: request quote
Location: Land-it IT 36066 Sandrigo, Via Piave, 7
Seller: Baldin SRL

Working centre ESSETEAM model SPRINT M12 at 4 axis: - working plane 3000x1200mm - axis run: X=3500 / Y=1750 / Z=200 mm - max panel thickness 120mm - working plane at 6 bars - vacuum pump 100 mc/h - electronic control with PC - safety carpets on machine front Working groups: - vertical spindle HP 10, attachment ISO30, with inverter 1.000 - 18.000rpm, with 4° rotary "C" axis, served by automatic tools changer at 8 positions and by back tools changer at 3 positions for angular heads - boring unit with 7+7 vertical chucks (X+Y) 2+2 horizontal chucks on X (panel heads) 1+1 horizontal chucks on Y (panel edges) currently missing Equipped with: 7 cone ISO30 1 angular h ... more

New in: used
Price: request quote
Location: Oberkochen
Seller: Gebr. Engelfried oHG

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2000 mm Feed motor: 3 kW Feed speed: 5-30 m/min. Control: ja CNC Weinig Powermat 500 for window production with strip separation -------------------------------------------------- --------------------- Executive Summary: -------------------------------------------------- --------------------- 6 spindles HSK / Powerlock with 7.5 KW and 8000 U / min each Window package with glazing bead removal Width, height and feed controlled by memory function Detailed description: -------------------------------------------------- --------------------- Technical specifications: ------------------------- Wor ... more

New in: 2004
Price: request quote
Location: Land-de DE 40764 Langenfeld, Schneiderstrasse 10
Seller: Maschinenhandel Borowski GmbH

injection moulding machine ENGEL VICTORY 1050-200 Power warehouse no.: 502523 manufacturer: ENGEL Typ: VICTORY 1050-200 Power Controller Unit: EC100 A03 year of construction: 2004 operating hours: 42524 h description of VICTORY 1050-200 Power: Our range of machines includes the detailed examination of all functions as well as the repair or replacement of defective components.Buying this used ENGEL injection molding machine is not a big risk, because we place the highest value on a functional test and further revision. For repair, we use original ENGEL replacement parts that meet the highest standards. The machine specification includes the clamping force of 2000 kN (200 to). ... more

New in: 1998
Price: used machinery auction RESALE 6.000 €
Location: Land-de DE Germany, 48734 Reken
Seller: Surplex GmbH

serial number: 22202 Weight approx.: 3500 kg Dimensions (l x w x h) approx.: 7500x2400x2400 mm setting measure approx (l x w x h): 7500x2400x2400 mm packing measure approx (l x w x h): 7500x2400x2400 mm Description: IMA Quadroform 100/300 CNC machining center working range X: 3,000 working range Y: 1,000 working range Z: 100 number of milling spindles: 1 speed max.: 18,000 rpm tool clamping system: HSK-F63 tool changer positions: 8 vertical drilling spindles: 14 horizontal drilling spindles: 6 x4/y2 sawing unit type: extension arm machine console table consoles: 6 vacuum pump: 100 m³/h safety device: safety mat more

New in: used
Price: request quote
Location: Land-it IT 22063 Cantù - COMO , Via Lario, 23
Seller: TOMESANI Srl

Code: 0442 Brand: ITALPRESSE Model: SCF/6 Hydraulic hot press Platens dimensions mm 3300 x 1300 heated with diathermic oil by electric boiler Fabricated platens Mylar coated platens Opening mm 400 N° 6 pistons Safety rope around the perimeter Thrust tonn 140 Motor power Hp3 Overall dimensions : mm 3650 x 1500 x 2050 h Weight kg 7000 more

New in: used
Price: request quote
Location: barneveld
Seller: Foeth

Open stirring vessel on skid with 2 pumps and plate heat exch.(1x) Make Nebi Engineering B.V. New unknown Material stainless steel Capacity 50 Ltr Vessel sizes dia. 370x450mm Conical bottom Flat top side Outlet through excenterpomp With propellor stirrer make GEA Stelzer Motor 0 37 KW 230/400 Volt Mounted on legs /skid in stainless steel execution With switchgear Floorspace 1 6x0 9 M Total height 1 9 M Extra Specifications - Met Pulsafeeder LPA3S2 pomp - Met GEA Ecoflex platenwarmtewisselaar more

New in: 2000
Price: 6.000 €
Location: Land-de DE Lindau-505
Seller: Troostwijk Auctions

Hydraulic double column press; pressing force 750 kN; motor power 30 kW; follow-up travel 105 ms/ 27 mm; safety distance 220 mm; max. tool dimensions 800 x 1.800 x 550 mm; max. tool weight 2.000 kg; stroke length 520 mm; working hours (05.07.2018) 67.408 h; weight approx 14.000 kg more

New in: used
Price: request quote
Location: barneveld
Seller: Foeth

Metal detector (1x) Make Safeline Ltd. Salford Type Tablex New unknown Material stainless steel Tunnel sizes 75x20mm Mounted on frame With switch Floorspace 0 7x0 7 M Total height 1 0 M Weight 80 KG more

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
more types: