We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
TR 450 MATRIX cross-cut system with automatic cutting cycle by input on the control panel or by cutting list Input material: Single or stacking material with fixed length Applications: Production of pallets, packaging, furniture and garden furniture Cross-section: mm 25x330, 40x310, 60x290, 85x277, 95x265 Min. workpiece thickness 10 mm (with automatic loader 20 mm) Work table inclined 8° Technical characteristics of the sawing unit: Pneumatic sawing unit TR450 Engine power 5.5 hp (4 kW) HM saw blade diam.450 mm., F=30 Z=72 S=4.2 Technical characteristics of the feed system: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT Feed by rack and pinion system and brushless mot ...
I sell an automatic pneumatic cross-cut saw Stromab TR350 MATRIX 4, built in 2004. Powerful engine 3.0 kW Saw blade diameter fi.350x30mm Cutting pattern ver.1 max. 210x30mm Cutting scheme ver.2 max. 150x80mm Entry table automatic matrix 7100mm Exit table 2,20m (possible to extend) Aluminium profile for stops on the left table Optimization with automatic error detection and automatic cutting diagram programming. Available same. CE equipment. Weight 880kg.
Machining center for cutting large beams with 5 axes electronically controlled Maximum height of beam to be cut 300 mm Minimum width of beam to be cut longitudinally 100 mm Sliding table transversal travel 600 mm Swivel surface rotation degrees from 0 to 345° Circular blade dimensions 800 mm Blade motor power HP 20 Maximum working width 650 mm Beam moving system with motorized rubber wheels and pneumatic upper pressers Roller benches of 5500 mm both in entry and exit
Code: 0133 Brand: STROMAB Model: PS/50 F - CE Standard Manual pendulum saw for cutting boards, wood packaging, furniture, window frames and various - CE Standard Technical data: Blade diameter mm 500 F30 Blade speed rpm 2800 Motor Hp 7,5 Cutting capacity mm 510 Cutting depth mm 145 Manual feed Suction mouth diameter mm 150 Infeed roller table mm 1500 Outfeed roller table mm 1500 Weight kg 350
Code: 0254 Brand: STROMAB Model: CT 800 - CE Standard Cutting centre for beams, wood carpentry, wooden roofs, sawmill, balconies, and various - CE Standard CE Standard Technical data Blade diameter mm 800 Motor power Hp 20 N° 5 axis controlled by programmer : Saw table rotation ( 0-340°) - Speed of the saw table rotation 9 sec. each 180° - Blade beveling from 90° to 45° (speed of the blade beveling 20 sec.) - Height of the blade above the table ( speed 15 sec. each 10 cm) - Beam positioning and measuring ( speed 17 mt/min) - Motorized positioning of the saw table compared to the saw fence mm 600 Photocell for the automatic reading of workpiece beginning Cutting capac ...
Saw blade feed pneumatic Motor power 7.5 KW Cross-section max. 280 x 135 mm, or 360 x 55 mm complete with: 1 mtr each Work table to the left and right of the saw blade bevelled sheet metal behind saw cut for drainage of Trimming cuts 2-hand control device Front saw blade protection HM saw blade Optionally available: Pneumatic front guard (TR501/P) Upper protective device cutting range (TR501/G) zus. Roller table per mtr. (with roll 60 mm) manual stop 60 mm manual stop 250 mm pneumatic stop 60 mm pneumatic stop 330 mm HM saw blade Laser directional light 220 V
Cutting cycle: Defect caps by chalk marking cutting with fixed lengths, Standard and sequential cutting, sequential cutting in markup mode. Infeed material: variable lengths for single piece loading WS.1 Continuous cross-cut saw 4 pcs. lower feed rollers 1 pcs. loading table 2 mt. Right with double marking table 1 pcs. outlet table 1 mtr. with rear stop Height of the rollers manually adjusted 12 pieces of luminescence chalk Cutting capacity: P. A: 130 x 175 mm, 120 x 200 mm, 100 x 230 mm, 85 x 250 mm, 15 x 305 mm Item B: 100 x 290 mm, 80 x 315 mm, 50 x 340 mm, 30 x 355 mm, 15 x 365 mm Control with: Color touch screen 7" Machining of cutting cycles directly on the machi ...
Code: 0168 Brand: STROMAB Model: ST 3000 - CE Standard Rotating pneumatic clamping machine, suitable for planks in general, squared timbers, strips for forming panels, table tops, steps for stairs and coffin - CE Standard Motorized rotation with release pedal and handy control wheel for worktable rotation Working capacity 3000 x 1200 mm Nr. 9 pneumatic front pressers ( 3 each side) Nr. 18 vertical columns with cylinder, diameter 80 mm ( 6 each side) Nr. 3 Working stations Thrust of vertical cylinder 8 bar kg 400 Daily output (8 hours) m2 263 Mechanical safety barriers Overall dimensions : mm 4800 x 2850 x 2300 Weight kg 1100
I sell an automatic CNC machining center for BLOCK-HOUSE manufacturing Stromab Autoblox. Year of construction 2011. New machine. Cutting saw 600mm / 7,5kW Dubel drilling unit up to dia.35mm x depth up to 320mm Pin milling machine up to dia.230mm / 4kW Horizontal milling machine up to dia.230mm / 4kW Vertical milling machine up to dia.180mm / 4kW Automatic feed system +-1mm Good for the timber construction structures! Available the same.
miter square horizontal: +60° / 0° / -45°; miter square vertical: 0° / +45°; cutting hight at 0°: 200 mm; cutting height at 15 °: 190 mm; cutting height at 45°: 115 mm; cutting performance at 0°: 525 mm; cutting performance at 60°: 270 mm; cutting performance at 45°: 370 mm; saw blade diameter: 550 mm; diameter spindle: 30 mm; speed: 2800 U/min; motor power: 4 kW; motor brake: yes, automatically; suction connection: 150 mm; weight: 315 kg; • Aluminium arm • Precision linear guides made of hardened steel • Rotation and tilt from the front of the machine • Emergency stop