We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Stork N-2500-1400 Year of construction: 2005 Injection unit: Spray pressure (max.) 2100 bar Injection volume (max.) 595 ccm Injection weight PS (max.) 565 g Spraying speed (max.) 299 ccm/s Nozzle (immersion depth) Clamping unit: Clamping force 250 tons Locking force 275 tons Size of the clamping plate (hor. + vert.) 920 X 920 Opening stroke (max.) 575 mm Max. tool weight Tool height (min./max.) 200-685 Clear width between the spars 585-585 mm Discharge stroke (max.) 175 mm Ejector diameter max.80 mm Centering ring (DS-AWS) 160 mm Max. clear width between tension p. Options: Core pull (time limit switch) Freely programmable Ejector plate (end position control) ...
used
Stork box closing machine, plastic infeed belt, belt width: 500 mm, total dimensions infeed belt: 800 mm x 1000 mm x 600 mm, clearance: 490 mm x 700 mm, plastic rollers, roller width: 600 mm, with Nordson glue unit, type: 3400-2AA12/A, total dimensions: 2050 mm x 1220 mm x 1650 mm.
used
Stork S 5500-2150 Year of construction: 2002 Brand: Stork Specifications Spray weight: 1.218 g Clamping force: 5500 kN Screw diameter: 72 mm Spar spacing: 1010 x 1010 mm Clamping plate size: 1475 x 1485 mm Tool installation height min.: 300 mm Control: CDS-600 Operating hours: 29,000 h Language: English,Polish Power: 190 kW Weight: 40200 kg Core train: Yes Euromap: Yes Air valve: Yes Heizkanāle: Yes Toggle lever locking unit: Yes Gas storage: Yes
used
Clamping force: 1750kN, clamping plate dimensions: 700x804mm, opening stroke: 450mm, screw diameter: 57mm, length: 5959mm, width: 1360mm, height: 1960mm, weight: 4.5t, operational hours counter: 56,736h.
used
Clamping force: 1750kN, clamping plate dimensions: 700x804mm, opening stroke: 450mm, screw diameter: 57mm, length: 5959mm, width: 1360mm, height: 1960mm, weight: 4.5t, operational hours counter: 50,409h.
used
Clamping force: 2500kN, clamping plate dimensions: 840x904mm, opening stroke: 520mm, screw diameter: 72mm, length: 6500mm, width: 1465mm, height: 2030mm, weight: 6.4t, operational hours counter: 100,662h.
used
Including spare parts, without accessories, was maintained regularly.
used
including spare parts, without accessories, was maintained regularly.
used
Including spare parts, without accessories, was maintained regularly.
used
screw size: 98 mm injection shot weight in Polysterol: unbkt. g/PS closing pressure: 8600 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
screw size: 62 mm injection shot weight in Polysterol: 903 g/PS closing pressure: 3300 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
screw size: 84 mm injection shot weight in Polysterol: unbkt. g/PS closing pressure: 440 kN volumn: 1660 volt: V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Manufacturing number: 74448 Production Year: 1983 Closing force: 4,400 kN Maximum opening stroke: 720 mm Mold height min / max: 200/720 mm Screw diameter: 84 mm Technical condition: good The machine is connected to electricity (you can see how it works)
used
Manufacturing Number: 41757 Production Year: 1985 Closing force: 1750 kN Maximum opening stroke: 450 mm Mold height min / max: 200/500 mm Screw diameter: 52 mm Technical condition: good The machine is connected to electricity (you can see how it works)
used
Manufacturing Number: 42552 Production Year: 1991 Closing force: 2500 kN Maximum opening stroke: 520 mm Mold height min / max: 200/525 mm Screw diameter: 57 mm Technical condition: good The machine is disconnected from the power supply (not working)
used
Stork S6600-5650 injection molding machine Year of production: 2011 Total installed power: 90 kW Max. injection speed: 500 mm / s Max. injection pressure: 1650 bar Screw diameter: Ã84 mm Max. shot weight for PP: 2042 g Mold closing force: 6600kN Clearance between H x V columns (â x â): 900 x 900 mm Mold height min: 300 mm Max. mold height: 900 mm Max. mold opening stroke: 940 mm Max. ejector pin height: 680 mm Centering rings diameter: 200 mm Max. ejector stroke: 300 mm Dimensions of the mold mounting plates H x V: 1370 x 1370 mm Aggregate volume: 4527g The diameter of the hole in the mouthpiece: Ã 8 mm The injection molding machine in good condition is constantly used in current production, it is possible to see it on site or send a movie with an example of operation.
used
Clamping force [kN] 12000 Clearance between columns (hxv) [mm] 1200 x 1200 min./ max. mold height [mm] 500 - 1695 Maximum opening width [mm] 2000 injection unit Screw diameter [mm] 100 Injection volume [cm3] 4800 Injection weight [g] 4363 Electric-hydraulic equipment Pump motor rated power [kW] 75 Heater power [kW] 70
used
Schneckendurchmesser/Screw Dia: 72 mm Hubvolumen/Swept Volume: 1283 ccm Spritzgewicht/Shot Weight: 1218 g Spritzdruck/Injection Pressure: 1600 bar Schliesskraft/Clamping Force: 5500 kN Holmabstand/Tie Bar Distance: 1010 x 1010 mm Aufspannplattengrosse/Platen Size: 1475 x 1485 mm Werkzeugeinbauhohe min./Mould height min.: 300 mm Werkzeugeinbauhohe max./Mould height max.: 1250 mm Offnungsweg/Opening Stroke: 940 mm Plattenabstand max/Total day-light max: 2190 mm Betriebsstunden /Working hours 29.000 h Leistung/Power: 190 kW Abmessung/Dimensions(LxWxH): 9,4 x 2,8 x 2,7 m Gewicht/Weight: 40200 kg Ausstattung/Equipment Sprache/Language: Englisch/English , Polnisch/Polish Luftventil/ Air valve: 9x Roboterschnittstelle / Robot slot: Euro 12 Kernzug/ Core pullers: 2x Heizkanal/ heating channel: 32x Trichter/ hopper: Yes Control: IPC 150, CDS-600
used
Doseuse Stork DTF Type: Masterfill 5 Power: 16 kW Power: 400 V Tri Temperature: -10C / 40C 5 pumps 5 nozzles 5 blades Dimensions: 1502.5 x 935 x 1782.65 mm (L x l x H)
used
1 of used carton erector with bottom sealer, make STORK, type SA-25L (KOALA), new 1989, size adjustable. With Siemens S5-100U PLC, Nordson 2302 hot-melt unit and blank feed conveyor. Left to right as seen from operator’s side. Capacity maximum 25 cartons/minute (depending on size). Carton dimensions: length: 150 - 450 mm, width: 100 - 400 mm, height: 180 - 400 mm. Blank dimensions: min 250 x 280 / max 850 x 750 mm. Fully guarded. Manuals available.
used
MEATBALLS FORMER STORK TITAN B.V, MODEL: TVM 004 Technical description: Number of heads: 6 Power supply: 380-440V/50-60 Hz Dimensions: 1500 x 2300 x 2680 mm Load lifter: Optional
used
Used Marel Stork THV 630 former is used for shaping and forming various meat products, such as burgers, meatballs, nuggets, sausages, and patties. It helps create uniform shapes and sizes for consistent portioning and presentation. THV 630 former has a belt width of 630mm. This width allows for efficient processing of meat products within that range. Marel is known for prioritizing hygiene and food safety in their equipment designs. The THV 630 former is designed with features that facilitate easy cleaning and sanitization. It typically has removable parts, smooth surfaces, and meets the necessary food-grade standards. The THV 630 former is equipped with advanced automation and control systems. These systems offer precise control over shaping parameters, production speed, and product consistency. The automation features help improve efficiency, reduce labor requirements, and ens ...
used
Used carton machine by Stork Bepak b. v. Bottling & Packaging System: Utrecht Netherlands type S.A.-25. New 1998. Can form corrugated cardboard boxes in a wide range of dimensions. During transport from section B to section C, an applicator (from Nordson USA) of hotmelt glue (granules or flakes) applies heated hotmelt glue under high pressure in strip form to the vertical dan tabs of the carton. Capacity: 25 cartons/min. Installed power: 8 kW.
used
Closing unit Clamping force t: 330 Opening path mm: 620 Holm size mm: 675 x 675 Installation height min/max mm: 200/620 Plate size: 1000 x 1000 Spraying unit Screw diameter mm: 62 Spray weight gr: 865 Spray volume cm3: 951
used
STORK RHO40 homogeniser. 3800 l/hr, 250 bar, single stage. equipped with hydraulic operated rotating homogenising valve. fully reconditioned, excellent condition.