used STORK Heat exchangers

Closing unit Clamping force t: 330 Opening path mm: 620 Holm size mm: 675 x 675 Installation height min/max mm: 200/620 Plate size: 1000 x 1000 Spraying unit Screw diameter mm: 62 Spray weight gr: 865 Spray volume cm3: 951

STORK RHO40 homogeniser. 3800 l/hr, 250 bar, single stage. equipped with hydraulic operated rotating homogenising valve. fully reconditioned, excellent condition.

Kat. No. 12-2155 in a very good condition max. working pressure allowed: 1,8 bar max. temperature allowed: 130°C DxH: 1800 x 5000 mm For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

STORk RHO40 Homogenisator. 3800 l/hr, 250 Bar, eine stufig. ausgestattet mit dem hydraulischen bedienten Drehende homogenisierventil. völlig wieder instand gesetzt, sehr gutem Zustand.

CAP.: 25 CARTONS/MIN., 300-395 x 227-300 x 250-273 MM - L x W x H, 8 KW

Horizontal side channel pump Materials: - Case: 1.4581 - Wheels: 1.4408 - Wave: 1.4571 Housing sealing: single-acting sliding ring seal, carbon/silicon carbide/viton Version A6: Pump mounted on base plate elastically coupled with 1.35 kW IEC standard rotary current motor Pressure: 2 bar Power: 800 l/h Revolutions: approx. 1,450 rpm Rated frequency: 50 Hz Engine power: 230/400 V Protection class: IP 55 Type of protection: E Ex eII T3 Type of construction: B3 Pumps partly unused, therefore in very good condition!

Materials: Housing: 1.4581 Wheels: 1.4408 wave: 1.4571 Sealing: single-acting mechanical seal, carbon/silicon carbide/Viton Model A6: Pump on base plate mounted elastic coupled with 1.35 kW IEC standard motor, three-phase Pressure: 2 bar Revolutions: approx. 1,450 U/min Output: 1,200 l / h Mains frequency: 50 Hz Engine power: 230/400 V Protection class: IP 55 protection class: E ex eII T3 Design: B3 Pump partially unused in excellent condition!

SUB: FOR SALE...1 STORK WERKSPOOR R156 HAVE A GDY SIR,. WE'VE 1 PCS STORK WERKSPOOR COMPLETE ENGINE FOR SALE. TYPE. R156 MOTOR NO. 20766 P.K. 205 RPM 1200 YOB. 1975 IF YOU INTEREST PLS DO NOT HESITATE TO CONTACT WITH US.. EX STOCK .ENGINES READY TO TRANSPORT. Capt. Ayhan Ugurlubay With kind of regards; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: + 90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

all stainless steel electrically heated 127 kW frying length 5.000 mm belt width 400 mm adjustable speed oil level control oil circulation pump sediment removal system electrical hoists fire protection overall dimensions (l x w x h) : ± 8.300 x 2.000x 2.700 mm outfeed conveyor teflon-infeed

FOR SALE... STORK WARTSILA 16SW 280 CRANK SHAFT TO WHOM IT MAY CONCERN; WE VE CRANK SHAFT OF STORK WARTSILA 16SW 280 AT OUR STOCK STANDARD MEASUREMENT WITH REPORT. WITH GEAR & COUNTERWEIGHTS. PLS FIND CRANK STAMP DETAILS ON BELOW. 1111SW 131 F013215 LLOYD S STU. 300240 6.93 STU. 9601908 YOB 1993 CRANKSHAFT READY TO TRANSPORT. IF YOU HAVE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba With Kind Regards ; Aliaga Marine Services E mail: info/ aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

Dear's Sale, Stork DRO218 engine's Up block, comp cover, piston, conrod, pump, liner... Ready for transports. Best Regards info@kscege.com

FOR SALE... COMPLETE ENGINE STORK WARTSILA DIESEL 6SW 280 TO WHOM IT MAY CONCERN; WE VE COMPLETE ENGINE STORK WARTSILA 6SW 280 AT OUR STOCK PLS FIND ENGINE SPEC AT BELOW MODEL 280 6SW YEAR OF BUILT 1999 NUMBER 13098 POWER 1470kW RPM 750 MADE IN THE NETHERLAND ENGINE READY TO TRANSPORT EX STOCK. BESIDES WE VE ALSO MANY MAJOR PARTS OF THIS ENGINE CYLINDER HEADS / PISTONS / CON RODS ETC .. IF YOU'VE ANY FURTHER QUESTIONS PLS DONT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba BEST OF regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

Condition: Fully Checked/Working Technical data: • overall dimensions 4075x1000x1650 mm; • power 18.5 kW; • power supply 380 V, 50 Hz; • capacity 600 kg/h of pork or beef and 1200 kg/h of poultry meat; • diameter output 200 mm; • weight 3000 kg.

Pumps were used for the distribution of well water. For performance data pumps and motor, see power plates. Price is valid for 2 complete strands. ( Motor with pump on platform .) A 4.5 m3 m VA container was used as a template. ( see other entry )

all stainless steel electrically heated 4 x 9 kW frying length 1,500 mm belt width 400 mm adjustable speed oil level control manual hoists suitable for fire protection overall dimensions (l x w x h) : x 4,350 x 1,750 x 2,250 mm

Qty. 1 Second-hand carusel Monoblok filling line Mfc.: Stork Bepak B.V. Built: 1992 Type: VS 60/110/12LV Capacity: 20 000 Btl./h No. of filling stations: 60 pieces No. of closing heads: 12 pieces Size of buttles: 250, 500, 700 & 750 ml Inspector checking the fill level and cap Very good condition!

Doseuse Stork DTF Type: Masterfill 5 Power: 16 kW Power: 400 V Tri Temperature: -10C / 40C 5 pumps 5 nozzles 5 blades Dimensions: 1502.5 x 935 x 1782.65 mm (L x l x H)

Product number: 1958WB Type: TFM630 Serial number: 10092057 Year of construction: 2011 Belt width: 630 mm Dimensions: 3000 x 1100 x 1800 mm

Product number: 1959WB Type: TPJ630 Serial number: 4T210793 Year of construction: 1999 Belt width: 630 mm Power: 3 x 380V, 50Hz Dimensions: 2700 x 1250 x 2100 mm For standard crumbs and japanese crumbs

Product number: 1993B Type: GoldFryer TBM630/5000TH Serial number: 10050409 Year of construction: 2005 Belt width: 630 mm Frying length: 5000 mm Heating: thermic oil Power: 3 x 400V, 50Hz, 11kW Dimensions: 9100 x 1900 x 2900 mm Teflon infeed, hold down belt, circulation pump, electric hoists, oil level control, CO2 fire surpression system

Product number: 1998B Townsend MasterFormer Type: TA1521 Serial number: 10080439 Year of construction: 2010 Stork MasterFill Type: MTFII Serial number: 0441010 Year of construction: 2010 Stork Master Slice Type: DRST Serial number: 0420410 Year of construction: 2010 Caliber: 50 mm Karl Schnell vacuumfiller Type: P10SE, 596P Serial number: 22045 Year of construction: 2010 Power: 3 x 400V, 50Hz, 10.9kW Weight: 1180 kg Risco vacuumfiller Type: RS303 Serial number: T310021 Year of construction: 2010 Power: 3 x 400V, 50Hz, 7.7kW Weight: 830 kg With RS70 grinding head

screw size: 133 mm injection shot weight in Polysterol: 5940 g/PS closing pressure: 8000 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw size: 115 mm injection shot weight in Polysterol: 3915 g/PS closing pressure: 6600 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw size: 98 mm injection shot weight in Polysterol: unbkt. g/PS closing pressure: 8600 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

screw size: 62 mm injection shot weight in Polysterol: 903 g/PS closing pressure: 3300 kN total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.