british flag
Resale Logo

STOCK used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information auctioneer  Gobid-it® On-line Auctions  http://www.corimactrade.it 
banner logo
start page > keywords STOCK > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125480009 110

FISCHER 3000 X 1500 for sale
Measuring Plates


Measuring plate fishing 3000 X 1500 11-99-010 delivery: immediately number: 11-99-010 manufacturer: Fischer type: 3000 x 1500 MACHINE data year: approx. 1994 L x W x H: CA. 3000 x 1500 x 1000 mm weight: approx. 3000 k ...
used machine
 
Measuring plate fishing 3000 X 1500 11-99-010 delivery: immediately number: 11-99-010 manufacturer: Fischer type: 3000 x 1500

MACHINE data year: approx. 1994 L x W x H: CA. 3000 x 1500 x 1000 mm weight: approx. 3000 kg

Very good condition specifications measuring plate length: approx. 3000 mm width: approx. 1500 mm thickness: approx. 350 mm

Accessories â?¢ 4 x tailstock for concentricity measurement â?¢ 2 x bezel for concentricity measurement â?¢ central guide rail for tailstock â?¢ storage feet accessories on request price and other specifications on request
1994
Price  
    request
125494855 102  

OERLIKON DM 2a for sale
Center Lathe


turning diameter over bed: 625 mmturning diameter over slide rest: 385 mmturning length: 2500 mmturning speeds: 7 - 1070 U/mincentre height: 300 mmspindle bore: 62 mmtotal power requirement: 20 kWweight of the machine ca ...
used machine
 
turning diameter over bed: 625 mm
turning diameter over slide rest: 385 mm
turning length: 2500 mm
turning speeds: 7 - 1070 U/min
centre height: 300 mm
spindle bore: 62 mm
total power requirement: 20 kW
weight of the machine ca.: 5,2 t
Dimensions (LxWxH): 4,7 x 1,4 x 1,6 m
Center lathe with
- 3-jaw chuck F 315
- Fixed tailstock top
- Multifix holder
- 2-axis digital display
- Fixed Lynette 180 mm
- Coolant system
- rapid traverse



This ad was created with MODUL MWS - the software solution of LogoTech.
1980
Price  
    request
125479997 109

SODICK A 325 for sale
Wire Cutting Spark Erosion Machine Tools


Wire EDM SODICK A325 bearing no 1072 A2759 category wire EDM machine make SODICK A325 type built in 1998 State second-hand machine control CNC storage HAGUENAU country of origin Thailand delivery immediately cargo base s ...
used machine
 
Wire EDM SODICK A325 bearing no 1072 A2759 category wire EDM machine make SODICK A325 type built in 1998 State second-hand machine control CNC storage HAGUENAU country of origin Thailand delivery immediately cargo base stock HAGUENAU

Technical details table length 600 mm table width 400 mm amperes A travel - x 350 mm travel - y 250 mm travel - z 220 mm U-axis 80 mm V-axis 80 mm wire diameter 0.03 - 0.3 mm working pool size 895 x 650 mm max. work piece weight 450 kg Werkstückhö Hey â Max 220 mm workpiece dimensions Max 600w x 530 x 200 mm autom. Wire Threading conical cutting +/-30 ° / 30 mm ° wire voltage 300-2300 g dielectric 530 l total power consumption kVA machine weight approx. 3000 kg space requirement approx. 2.25 x 2.45 x 2.10 m description Autom. Wire Threading AWT serial data interface
1998
18,500 €  
    request
125494859 102

KAPPEL for sale
Center Lathe


turning diameter over bed: 380 mmturning diameter over slide rest: 240 mmturning length: 1000 mmturning diameter in the gap: 520 mmturning speeds: U/mincentre height: 190 mmspindle bore: 52 mmtailstock quill taper MT:  ...

 
turning diameter over bed: 380 mm
turning diameter over slide rest: 240 mm
turning length: 1000 mm
turning diameter in the gap: 520 mm
turning speeds: U/min
centre height: 190 mm
spindle bore: 52 mm
tailstock quill taper MT: MK
tailstock travel: mm
tailstock quill diameter: 80 mm
total power requirement: 2,9 kW
weight of the machine ca.: 12, t
dimensions of the machine ca.: 2,8 x 1,3 x 1,4 m
- 3-jaw chuck with reversible jaws
- Coolant system
- Multifix steel holder with 4 cassettes



This ad was created with MODUL MWS - the software solution of LogoTech.
 
Price  
    request
125479992 109

KLOPP 450 for sale
Rapid Planers


Quick HOBLER KLOPP 450 - 09-01-005 delivery time: immediate number: 09-01-005 manufacturer: Klopp type: 450 MACHINE data year: approximately 1978 L x W x H: approx. 1400 x 1000 x 1400 mm weight: approx. 500 kg Ver ...
used machine
 
Quick HOBLER KLOPP 450 - 09-01-005 delivery time: immediate number: 09-01-005 manufacturer: Klopp type: 450

MACHINE data year: approximately 1978 L x W x H: approx. 1400 x 1000 x 1400 mm weight: approx. 500 kg

Very good condition - from University stock technical data maximum planing length: approx. 450 mm planing width: approx. 450 mm-maximum distance table - RAM: approx. 300 mm vertical movement of the head: approx. 250 mm

Tischaufspannï¬?äche: approx. 400 x 320 mm height of the table: approx. 350 mm power: approx. 2,0 kW speed: approx. 15-120 stroke/min feed range (plane offset): approx. 0.2 3.0 mm / stroke

Accessories: â?¢ centrally exciting planing Vice (jaw width: approx. 220 mm) â?¢ 1 piece bumper chisel

Accessories on request price and other specifications on request
1978
Price  
    request
125494861 102

HEYLIGENSTAEDT 440 Ea/2000 for sale
Center Lathe


turning diameter over bed: 890 mmturning diameter over slide rest: 600 mmturning length: 2300 mmturning speeds: 11,2 - 560 U/mincentre height: 450 mmspindle bore: 98 mmtailstock quill taper MT: 6 MKtotal power requiremen ...
used machine
 
turning diameter over bed: 890 mm
turning diameter over slide rest: 600 mm
turning length: 2300 mm
turning speeds: 11,2 - 560 U/min
centre height: 450 mm
spindle bore: 98 mm
tailstock quill taper MT: 6 MK
total power requirement: kW
weight of the machine ca.: 7,3 t
Dimensions (LxWxH): 4,5 x 1,7 x 1,8 m
Center lathe with
- 3-jaw chuck F 315
- Fixed tailstock top
- Multifix holder
- 2-axis digital display
- Fixed Lynette 180 mm
- Coolant system
- rapid traverse



This ad was created with MODUL MWS - the software solution of LogoTech.
1973
Price  
    request
125479990 109

KLOPP 450 for sale
Rapid Planers


Quick HOBLER KLOPP 450 - 09-01-004 delivery time: immediate number: 09-01-004 manufacturer: Klopp type: 450 MACHINE data year: approximately 1978 L x W x H: approx. 1400 x 1000 x 1400 mm weight: approx. 500 kg Ver ...
used machine
 
Quick HOBLER KLOPP 450 - 09-01-004 delivery time: immediate number: 09-01-004 manufacturer: Klopp type: 450

MACHINE data year: approximately 1978 L x W x H: approx. 1400 x 1000 x 1400 mm weight: approx. 500 kg

Very good condition - from University stock technical data maximum planing length: approx. 450 mm planing width: approx. 450 mm-maximum distance table - RAM: approx. 300 mm vertical movement of the head: approx. 250 mm Tischaufspannï¬?äche: approx. 400 x 320 mm height of T isches: approx. 350 mm power: approx. 2,0 kW speed: approx. 15-120 stroke/min feed range (plane offset): approx. 0.2 3.0 mm / stroke

Accessories: â?¢ centrally exciting planing Vice (jaw width: approx. 220 mm) â?¢ 1 piece bumper chisel

Accessories on request price and other specifications on request
1978
Price  
    request
125494845 102

GILDEMEISTER CTX 200 S2 for sale
CNC Lathe - Inclined Bed Type


turning diameter: 290 mmturning length: 365 mmcontrol: Heidenhain MANUEL GUIDEgreates pass round over bed: 440 mmx-travel: 160 mmz-travel: 350 mmspindle head: 120 H 5 mmspindle bore: 56 mmbar material dia.: 42 mmspindle  ...
used machine
 
turning diameter: 290 mm
turning length: 365 mm
control: Heidenhain MANUEL GUIDE
greates pass round over bed: 440 mm
x-travel: 160 mm
z-travel: 350 mm
spindle head: 120 H 5 mm
spindle bore: 56 mm
bar material dia.: 42 mm
spindle diameter in front bearing: 90 mm
turning speed range: 20 - 5000 U/min
spindle drive: 9 kW
no. of tools in turret 1: 12 x VDI 30
total power requirement: 22 kW
weight of the machine ca.: 4,2 t
dimensions of the machine ca.: 2,8 x 1,7 x 1,8 m
0114002271

Machine with CE

Heidenhain CNC Pilot 3190
Tool pickup device
Bar loader LNS Super Hydro BAR

C-axis (main spindle)
- speed min / 1 28
- Holding torque Nm 70
- Graduation accuracy degree <0.03

Universal disc turret with driven tools
Number of tool stations 12
   of which max. powered tools 12
   Max. Clamping diameter of the angetr. Tools 13 mm
   Drive line 40% ED kW 5.7

movable tailstock
Chip conveyor
19 hornbin collets with keys
35 x various VDI tools
Hornbuch SPANNTOP
6 x VDI 30 tools driven
Operating instructions, operating instructions, planning documents,
Transport documents and wiring diagram available

Operating hours approx. 23,300 h



This ad was created with MODUL MWS - the software solution of LogoTech.
2001
Price  
    request
125479976 103

KUNZMANN UF 6 N for sale
Tool-Milling Machines


TOOL room milling machine KUNZMANN UF 6 N - 07-07-226 delivery: immediately number: 07-07-226 manufacturer: KARSTEN type: UF 6 N MACHINE data year: approx. 1987 L x W x H: approx. 1600 x 1200 x 1800 mm weight: approx ...
used machine
 
TOOL room milling machine KUNZMANN UF 6 N - 07-07-226 delivery: immediately number: 07-07-226 manufacturer: KARSTEN type: UF 6 N

MACHINE data year: approx. 1987 L x W x H: approx. 1600 x 1200 x 1800 mm weight: approximately 600 kg

Very good condition specifications digital display: 3 - axes - digital display HEIDENHAIN traverse paths: X - axis: approx. 410 mm Y - axis: approx. 200 mm Z - axis: approx. 410 mm Tischaufspannï¬?äche: approx. 860 x 265 mm spindle: speed range: approx. 30-2150 U /. min tool holder: ISO 30 power: approx. 3,2 kW tool clamping: manually feeds & express ducts: 3 axes feed range: approx. 0-1000 mm / min rapid traverse: approx. 2.0 m / min accessories â?¢ vertical & horizontal - trimmer â?¢ angle milling head

â?¢ Drilling tailstock (stroke: approx. 60 mm) â?¢ coolant system â?¢ complete machine documentation â?¢ various wrenches â?¢ safety handwheels â?¢ feet â?¢ emergency - off â?¢ work light â?¢ various tool holders

Accessories on request price and other specifications on request
1987
Price  
    request
125494835 109

IRLE B 70 MM for sale
Faceplate Ring Bending Machine


faceplate diameter max.: 650 mmfaceplate speeds:: 3 / 4 / 6 UpMmin. dia.: 120 mmbed slide rapid adjustment: 65 mmDrive: 3 kWHeight: 800 mmbending capacity max. - flat: 60 x 12 mmbending capacity - angular iron: 50/50/6 m ...
used machine
 
faceplate diameter max.: 650 mm
faceplate speeds:: 3 / 4 / 6 UpM
min. dia.: 120 mm
bed slide rapid adjustment: 65 mm
Drive: 3 kW
Height: 800 mm
bending capacity max. - flat: 60 x 12 mm
bending capacity - angular iron: 50/50/6 mm
weight of the machine ca.: 1,35 t
dimensions of the machine ca.: 2,4 x 0,85 x 1,3 m
Electric 380 Volt:
Foot switch:
Machine dealer with own stock of 2500 m² and certification of the database
Machineseeker.



This ad was created with MODUL MWS - the software solution of LogoTech.
1965
Price  
    request
125479974 103

DECKEL FP 4 MK for sale
Tool-Milling Machines


TOOL room milling machine cover FP 4 MK - 07-07-225 delivery: immediately number: 07-07-225 manufacturer: lid type: FP 4 MK MACHINE data year: approx. 1988 L x W x H: approx. 2300 x 1800 x 1800 mm weight: approximate ...
used machine
 
TOOL room milling machine cover FP 4 MK - 07-07-225 delivery: immediately number: 07-07-225 manufacturer: lid type: FP 4 MK

MACHINE data year: approx. 1988 L x W x H: approx. 2300 x 1800 x 1800 mm weight: approximately 1750 kg

Very good condition - figure similar to technical data digital display: 3 - axes - active - digital display HEIDENHAIN (TNC 113) 4th axis - digital display (HEIDENHAIN) traverse paths: X - axis: approx. 500 mm Y - axis: approx. 400 mm Z - axis: approx. 400 mm Tischaufsp annï¬?äche: approx. 700 x 400 mm spindle: speed range: approx. 50-2500 RPM spindle taper: ISO 40 power: approx. 6,0 kW tool clamping: automatically feeds & express ducts: 3 axes feed range: approx. 8-630 mm / min rapid traverse: approx. 3.0 m / min

Accessories â?¢ 4th axis rotary table â?¢ vertical & horizontal - trimmer â?¢ angle milling head â?¢ drilling tailstock (stroke: approx. 120 mm) â?¢ coolant system â?¢ complete machine documentation â?¢ various wrenches â?¢ horizontal - spindle cover â?¢ Sicherheitshan dräder - central lubrication â?¢ emergency â?¢ Tiltable Control Panel â?¢ spindle brake

Accessories on request price and other specifications on request
1988
Price  
    request
125494837 107

HAEUSLER HPR 12 mech. asym. - V+H for sale
Section Bender


I-beam section - flat steel: 220 bei Dm 1200 mmI-beam section - upend: - mmangular steel - leg outwards: 110x110x14 bei Dm 1000 mmangular steel - leg inwards: 80x80x10 bei Dm 1000 mmflat steel flat: 100 x 20 bei Dm 1000  ...
used machine
 
I-beam section - flat steel: 220 bei Dm 1200 mm
I-beam section - upend: - mm
angular steel - leg outwards: 110x110x14 bei Dm 1000 mm
angular steel - leg inwards: 80x80x10 bei Dm 1000 mm
flat steel flat: 100 x 20 bei Dm 1000 mm
T-steel / side out: 120x120x13 bei Dm 1200 mm
U-iron on the x-axis: 22 bei Dm 1200 mm
pipes: 102 x 6 bei Dm 900 mm
round material: 75 bei Dm 700 mm
square material: 60 x 60 bei Dm 600 mm
bending speed: 3,5 m/min
No. - Rolls: 3
Drive: 7,5 kW
weight: 6,4 t
dimensions of the machine ca.: 2,1 x 2,4 x 1,5 m
Condition: ready for operation:
Electric 380 Volt:
Set of standard rolls: I + H
Motorized adjustable rollers:
Control panel:
Central lubrication: autom.
Rolls for round material: 100 mm
Machine dealer with own stock of 2500 m² and certification of the database
Machineseeker.



This ad was created with MODUL MWS - the software solution of LogoTech.
1976
Price  
    request
125479970 103

DECKEL FP 3 for sale
Tool-Milling Machines


TOOL room milling machine cover FP 3 07-07 223 delivery: immediately number: 07-07-223 manufacturer: lid type: FP 3 MACHINE data year: approximately 1978 L x W x H: approx. 2000 x 1600 x 1900 mm weight: approx. 1500 k ...
used machine
 
TOOL room milling machine cover FP 3 07-07 223 delivery: immediately number: 07-07-223 manufacturer: lid type: FP 3

MACHINE data year: approximately 1978 L x W x H: approx. 2000 x 1600 x 1900 mm weight: approx. 1500 kg

Good general State technical data digital display: 3 - axes - digital display procedures: X - axis: approx. 500 mm Y - axis: approx. 300 mm Z - axis: approx. 380 mm Tischaufspannï¬?äche (Tilt/Swivel table): 660 x 375 mm spindle: speed range: approx. 40-2000 RPM spindle taper: ISO 40 power: approx. 3.8 of kW tool clamping: manually feeds & express ducts: in all 3 axis feed range: approx. 10-500 mm / min rapid traverse: approx. 1.5 m / min accessories â?¢ vertical & horizontal - trimmer â?¢ angle milling head

â?¢ Drilling tailstock (stroke: approx. 120 mm) â?¢ coolant system â?¢ complete machine documentation â?¢ various wrenches â?¢ horizontal - spindle cover â?¢ safety handwheels â?¢ machine feet

Accessories on request price and other specifications on request
1978
Price  
    request
125494791 103

FRIEDRICH DECKEL FP 1 for sale
Universal Milling Machine


Weight approx.: 1500 kgDimensions (l x w x h) approx.: 1580 x 1300 x 1600 mmDescription: technical details: horizontal milling spindle: number of spindle speeds 16, speed range gemoetrically staged, 40 to 2000 rpm, ratio ...

 
Weight approx.: 1500 kg
Dimensions (l x w x h) approx.: 1580 x 1300 x 1600 mm
Description: technical details: horizontal milling spindle: number of spindle speeds 16, speed range gemoetrically staged, 40 to 2000 rpm, ratio min./max. speed 1:50, interior cone, standard cone 40, headstock movement manual, 150 mm, work table: clamping surface 195 x 600 mm, clamping grooves: 2, 290/300 mm, longitudinal movement automatic/manual, 290/300 mm, vertical movement automatic/manual 330/340 mm, feed drive: number of feeds 16, feed range geometrically staged, 100 to 500 mm/min., movement spindles: table horizontal movement one rotation of scale disc 4 mm, table vertical movement one rotation of scale disc 2.5 mm, headstock movement one rotation of scale disc 2.5 mm, one scale mark of scale disc 0.025 mm, drive motor: power 1/1.4 kW, speed of motor (pole switchable) 1400/2800 rpm, main drive: toothed gear, number of steps: 8, V-belt 1, with accessories, see photos for details
 
Price  
  DE   request
125479968 103

DECKEL FP 2 for sale
Tool-Milling Machines


TOOL room milling machine cover FP 2 07-07-222 delivery time: immediate number: 07-07-222 manufacturer: lid type: FP 2 MACHINE data year: approximately 1978 L x W x H: approx. 1600 x 1200 x 1800 mm weight: approximate ...
used machine
 
TOOL room milling machine cover FP 2 07-07-222 delivery time: immediate number: 07-07-222 manufacturer: lid type: FP 2

MACHINE data year: approximately 1978 L x W x H: approx. 1600 x 1200 x 1800 mm weight: approximately 1000 kg

Good general State technical data digital display (optional): 2 or 3 - axes - digital display new procedures: X - axis: approx. 400 mm Y - axis: approx. 200 mm Z - axis: approx. 400 mm Tischaufspannï¬?äche: approx. 700 x 350 mm spindle: speed range: approx. 40-200 0 RPM spindle taper: ISO 40 power: approx. 2.2 of kW tool clamping: manually feeds & express ducts: in all 3 axis feed range: approx. 8-400 mm / min rapid traverse: approx. 1.5 m / min accessories â?¢ vertical & horizontal - trimmer â?¢ angle milling head
â?¢ Drilling tailstock (stroke: approx. 100 mm) â?¢ coolant system â?¢ complete machine documentation â?¢ various wrenches â?¢ safety handwheels machine feet â?¢ accessories on request price and further technical details on request
1978
Price  
    request
125494605 1900

REMS AMIGO 2 for sale
Electric Thread Cutting Stock


Weight approx.: 20 kgDimensions (l x w x h) approx.: 680 x 270 x 130 mmDescription: Tools up to 2 inch/ 6 to 30 mm, in metal box

 
Weight approx.: 20 kg
Dimensions (l x w x h) approx.: 680 x 270 x 130 mm
Description: Tools up to 2 inch/ 6 to 30 mm, in metal box
 
used machinery auction RESALE 55 €  
  FR   request
125479966 103

DECKEL FP 3 for sale
Tool-Milling Machines


TOOL room milling machine cover FP 3 07-07-219 delivery time: immediate number: 07-07-219 manufacturer: lid type: FP 3 MACHINE data year: approximately 1978 L x W x H: approx. 2000 x 1600 x 1900 mm weight: approx. 150 ...
used machine
 
TOOL room milling machine cover FP 3 07-07-219 delivery time: immediate number: 07-07-219 manufacturer: lid type: FP 3

MACHINE data year: approximately 1978 L x W x H: approx. 2000 x 1600 x 1900 mm weight: approx. 1500 kg

Good general State technical data digital display: 3 - axes - digital display HEIDENHAIN VRZ 752 B procedures: X - axis: approx. 500 mm Y - axis: approx. 300 mm Z - axis: approx. 380 mm Tischaufspannï¬?äche (Tilt/Swivel table): 660 x 375 mm spindle: Drehzahlberei ch: approx. 40-2000 RPM spindle taper: ISO 40 power: approx. 3.8 of kW tool clamping: manual feed & express ducts: in all 3 axis feed range: approx. 10-500 mm / min rapid traverse: approx. 1.5 m / min accessories â?¢ vertical & horizontal - trimmer

â?¢ Angle milling head â?¢ drilling tailstock (stroke: approx. 120 mm) â?¢ coolant system â?¢ complete machine documentation â?¢ various wrenches â?¢ horizontal - spindle cover â?¢ safety handwheels â?¢ machine feet

Accessories on request price and other specifications on request
1978
Price  
    request
125494001 104

NAXOS-UNION RP 300 for sale
Cylindrical Grinder


Weight approx.: 7200 kgcontrol: SINO SDS 3 Dimensions (l x w x h) approx.: 5400 x 2600 x 1600 mmgrinding wheel size: 600 x 60 x 203 mmgrinding wheel turining speeds: 800 - 1250 Rpmtotal power requirement: 12 kWDescriptio ...
used machine
 
Weight approx.: 7200 kg
control: SINO SDS 3
Dimensions (l x w x h) approx.: 5400 x 2600 x 1600 mm
grinding wheel size: 600 x 60 x 203 mm
grinding wheel turining speeds: 800 - 1250 Rpm
total power requirement: 12 kW
Description: NAXOS-UNION RP 300 Cylindrical Grinder
- machine no.: 35904
- distance between centres: 1500 mm
- centre height: 160 mm
workpiece headstock:
- taper: MK 4
- speed: 20 - 200 rpm
tailstock:
- taper: MK 4
- withdrawal: hydraulical and by hand
- table drive: hydraulical, infinitely variable 0 - 5 m/min
grinding headstock:
- total adjustment by hand: 210 mm
- rapid adjustment track, hydraulical: 50 mm
delivery:
- 1 scale line at handwheel: 0,01 mm
- min. delivery at trigger: 0,005 - 0,025 mm
- total infeed: 0 - 6 mm
- axial adjustment of grinding spindle: 8 mm
accessories/equipment:
- hydraulic at machine bed, with new gearwheel pumps and new pipes
- belt filter unit, with float switch, content approx.: 210 l
- dimensions of belt filter unit: 1500 x 1000 x 720 mm
- control cabinet, dimensions: 1600 x 1200 x 450 mm
- point grinding device
- approx. 12 pieces of adjustable feet
- two steady rests
- three grinding disc flanges
- two grinding discs
- one dresser with dressing plate, at tailstock
- one roll of filter paper
- one digital read out with glass scale for the X-axis
- operating manual with e-plan
- machine is completely mechanically overhauled, table is polished, guides are scraped, components are dismantled, defect parts are new manufactured and overhauled, hydraulic is completely renewed, lubrication system is overhauled, workpiece headstock and tailstock are new scraped at upper table, all motors are external overhauled as well as complete new primer coat and painting 2K-Lack RAL 7035 + 7012
- for further information see photos
1964
used machinery auction RESALE 23,400 €  
  DE   request
125479964 103

DECKEL FP 2 LB for sale
Tool-Milling Machines


TOOL room milling machine cover FP 2 LB - 07-07-214 delivery: immediately number: 07-07-214 manufacturer: lid type: FP 2 LB MACHINE data year: approx. 1975 L x W x H: approx. 2000 x 1800 x 1900 mm weight: 2200 kg G ...
used machine
 
TOOL room milling machine cover FP 2 LB - 07-07-214 delivery: immediately number: 07-07-214 manufacturer: lid type: FP 2 LB

MACHINE data year: approx. 1975 L x W x H: approx. 2000 x 1800 x 1900 mm weight: 2200 kg

Good general State technical data digital display: 3 - axes - digital display new procedures: X - axis: approx. 800 mm Y - axis: approx. 300 mm Z - axis: approx. 400 mm Tischaufspannï¬?äche: approx. 1000 x 440 mm spindle: speed range: approx. 40-2000 RPM

Spindle taper: ISO 40 power: approx. 2.2 of kW tool clamping: manually feeds & express ducts: in all 3 axis feed range: approx. 10-500 mm / min rapid traverse: approx. 1.5 m / min accessories â?¢ vertical & horizontal - trimmer â?¢ coolant system

â?¢ Angle milling head with drilling tailstock (stroke: approx. 100 mm) â?¢ complete machine documentation â?¢ central lubrication â?¢ various wrenches â?¢ spindle - protection Cap â?¢ Z - bellows accessories on request price and more specifications on request
1975
Price  
    request
125475410 102

VOEST DA 210/1 for sale
Center Lathe


turning diameter over bed: 430 mmturning diameter over slide rest: 245 mmturning length: 1000 mmcentre height: 210 mmturning speeds: 44 - 2000 U/minspindle taper: 55027 Gr. 6 spindle bore: 52 mmtaper bore: metr. 57 tails ...
used machine
 
turning diameter over bed: 430 mm
turning diameter over slide rest: 245 mm
turning length: 1000 mm
centre height: 210 mm
turning speeds: 44 - 2000 U/min
spindle taper: 55027 Gr. 6
spindle bore: 52 mm
taper bore: metr. 57
tailstock quill taper MT: Mk 4
power capacity: 5,5 kW
weight: 1,3 t
Mechanic: good:
Optical condition: good:
The machine can be viewed under current.:
0722801
380 V, 50 Hz Color: green

Equipment:
Engine brake
2 emergency stop switch
3 axis Mitutoyo digital display Linear Scala PLL 13 L
3 jaws - wedge bar 200 mm
Drill chuck with insert pin
Center point firmly
dto, running
Multifix holder B
3 inserts
Coolant device
Drum stop
Chip tray
Shaving back wall
Rotary test on 200 mm flying 0,015 mm
Operating instructions, spare parts list, circuit diagrams
Machine is workshop tested and with electrical acceptance record
usgeliefert!

! Upon request, machine with electrically locked chip protection
to be delivered at extra cost!
! Machine can be adapted to the new machine guidelines!



This ad was created with MODUL MWS - the software solution of LogoTech.
1990
Price  
    request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More STOCK models (2 or more machines):
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

CNC Turning Machines MATRA FUL 510x1000


CNC lathe MATRA FUL 510x1000 was produced in 2000. CNC lathe-specific data MATRA FUL 510x1000: -CNC control in Polish and German: Fagor 8055TC (the machine you can program the g code or supplement the ready field in marker overlays) machine reads dxf drawings -Turning length: 1000 mm -turning diameter: 510 mm -spindle speed: 5-2000 RPM -Chuck: fi 250 hydraulic head: 8 items VDi30 -extracted Bridge: increases the diameter of component manufacturing -taper tailstock: Morsea 5 -installed power: 13 KVA -size Lathes (l x w x h): 2500 x 1800 x 1900 mm -machine weight: 2.5 tons of equipment: a variety of high-quality knives for turning the company ISCAR

Heavy Lathes POREBA TCA 160


Heavy lathe POREBA TCA 160 was produced in 1959 by the famous Polish FUM POREBA. Technical data of lathe POREBA TCA 160: Scope of work:-height of tusks: 800 mm -maximum turning diameter over bed: 1600 mm -maximum turning diameter over support: 1300 mm -eyepiece: fi 800 mm -maximum turning diameter in the pó?okularze: 250 mm -maximum turning length: 6000 mm -maximum weight of workpiece between centers in: 16000 kG -permissible cross section of the chip (turning steel Rr = 60 kG/mm2) on a single support: 30 mm2 -permissible cross section of the chip (turning steel Rr = 60 kG/mm2) on a single support: 50 mm2 -permissible force on the knife: 6000 kG -the maximum torque at the spindle: 630000 kg.cm -the maximum cross section 70 x 70 mm knife: Cap Headstock: -number of spindle speeds: 24 n -the exponent of the speed: 1.25 -spindle speed range: 1,12-224 RPM., 1,12-224 r/min, 0.85-170 RPM. -front spindle neck diameter: 260 mm -slot in the spindle of the cone metric: # 120 -reducing Bush metric cone Tip: # 120/80 -spindle bore diameter: 105 mm -diameter of the blade Cap: 1600 mm Suport, feeds the normal: -20 longitudinal feed range: 0,19-5,0 mm/Rev. -20 transverse feed range: 0,095-2.5 mm/Rev. -20 feed on the upper tray of the range: 0,095-2.5 mm/Rev. Suport, feeds 8-20 longitudinal feed range: 1.5-40 mm/Rev. -20 transverse feed range: 0.75-20.0 mm/Rev. -20 feed on the upper tray of the range: 0.75-20.0 mm/Rev. Suport, feeds minute:-20 longitudinal feed range: 12-320 mm/Rev. -20 transverse feed range: 6-160 mm/Rev. -20 feed on the upper tray with a range: 6-160 mm/Rev. Suport, feeds to thread (the main screws. train.):-35 thread jumping metrycz. about t. : 1-50 mm -jumping 35 inch threads range: 24-1/2 scroll/inch Suport, feeds for threading on the top tray:-25 thread jumping metrycz. about t. 0.25-7 mm -jumping 35 inch threads/inch scroll: the scroll 28-3/inch Feed rates associated to the rolling cones of gradients creating: 1:1.5 (d) 1:1000 -rapid traverse: 4000 mm/min. Konik: -barrel diameter: 200 mm -stroke sleeve: 600 mm -slot in the spindle sto?. meter.: # 80 -radial offset: +-30 mm Glasses: -diameter adjustment range normal: 200-600, 200-500 equipment, okular, 300-800 mm -adjustment range of diameters okular special equipment: 30-300, 50-400, 200-500 mm Pó?okular: -adjustment range pó?okulara diameter: 50-250 mm Drive:-main motor power: 40 kW -the engine speed: 750 RPM. -rapid feed motor power: 2.2 kW -the engine speed rapid feed rate: 3000 rpm. -oil pump motor power: 0.37 kW -engine oil pump: 1500 rpm. -performance oil pump: 25 l/min. Sizes and weights: -distance between centres: 3000-15000 mm -weight for length 6000 mm and 1 support: ok. 30000 kg -extra weight Prov difference length 1000 mm: 1200 kg -the weight of the additional bracket: 1500 kg

Universal Lathes Up To 800 Mm Diameter PONAR REMO KEPNO TUX 63 B


Lathe PONAR REMO K?PNO TUX 63 B was built in the machine tool Factory PONAR REMO K?PNO in 2006 year. Technical data of lathe TUX 63B: -maximum turning diameter over bed: 630 mm -maximum turning diameter over cross slide: 380 mm -maximum turning length in between centers: 1500 mm -slot in the spindle, the cone metric: 80 mm -spindle: 71.5 mm -the width of the bed: 433 mm -slot in the tailstock sleeve Morse: 5 tailstock sleeve travel mm 180:- tailstock sleeve diameter: 90 mm -spindle speed range: 18-1800 rpm. -the number of spindle speeds: 21 -the number of feeds in the entire range of spindle speeds: 42 -feed range longitudinal: 0.08-3,26 mm/Rev. -the scope of the transverse feed rate: 0.04-1.63 mm/Rev. -the number of metric: 42 -range of metric: 1-88 mm -number of modular threads: 42 -range of modular thread: 1-88 II mm -number of inch threads: 42 -range of inch threads: 1-88 zw/1 " -the number of threads DP: 42 -range of DP threads: 1-88 DP -fast movement of bottom bracket: 4.2 m/min -life on the spindle torque: 980 Nm -maximum torque on the spindle (5 minutes): 1960 Nm jump lead screw: 6 mm -screw the cross slide stroke: 5 mm -the maximum cross section of the CAP the knife: 32 x 20 mm -speed synchronous motor: 750/1500 rpm. -main drive motor power: 3,9/7.2 kW -overall dimensions: 3130 x 1140 x 1285 mm -weight of the machine: 3200 kg

CNC Plasma Cutting Machines MACCHINA TAGLIO PLASMA REDCOM


REDCOM PLASMA CUTTING MACHINE MAKE MODEL YEAR 2008 Redcom EVL 25 18 Modular double Plasma cutting torch, with stock drilling tools. Measurements: 18 x 2.5 mt Hypertherm HPR260 HSD130 models with torches and Generator CNC ESA/GV Datasheet available in the documents section For more information contact us at + 39 030 725026 machinery and vision from Monday to Friday from 8:30 to 13:00 and from 14:00 to 19:00

Punching Machines VERNET 341A


Combined Punching/Shearing/Chopper VERNET type 341A Punching capacity Ø 26 x 16 or 32 x 13 mm Chopper capacity (see abacus) Shearing capacity sheet 13 /flat 90 x 18 mm Profiles shear L 110x10 mm - T 120x80x10 mm Voltage 380 V Dimensions (L x W x H) 2000 x 1000 x 240 mm Weight approx. 2 T MACHINE IN OUR STOCK IN FRANCE.

Book cover manufacturing machines Muller Martini 1509


Automatic saddle stitcher model 1509, Year 1996 - Three double feeders model 1516 L 5 max paper size 380x305 mms. - Min paper size 145x100 mms., Max speed 7.500 copies/hour - Two stitching heads, Air pump Rietschle 100 m3 - Three knife trimmer model 890/217 with many spare knives, copy counter, short delivery - All manuals and electric diagrams, many spare parts and accessories - Without damages, immediately available in stock, all photos attached

Textile and leather stocks


Auction name: Bankruptcy Knobo B.V. (leather goods manufacturer) in Dinxperlo (2/2) Online auction Start of auction: 15 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 23 May 2018 15:00 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions

Textile and leather stocks


Auction name: Bankruptcy Knobo B.V. (leather goods manufacturer) in Dinxperlo (2/2) Online auction Start of auction: 15 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 23 May 2018 15:00 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions

Textile and leather stocks


Auction name: Bankruptcy Knobo B.V. (leather goods manufacturer) in Dinxperlo (2/2) Online auction Start of auction: 15 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 23 May 2018 15:00 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions

Textile and leather stocks


Auction name: Bankruptcy Knobo B.V. (leather goods manufacturer) in Dinxperlo (2/2) Online auction Start of auction: 15 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 23 May 2018 15:00 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions

Textile and leather stocks


Auction name: Bankruptcy Knobo B.V. (leather goods manufacturer) in Dinxperlo (2/2) Online auction Start of auction: 15 May 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 23 May 2018 15:00 GMT +0200 (Western Europe (DST) The price listed is an opening bid To participate in the auction and for more information go to: BVA-Auctions

redcom 1222


REDCOM PLASMA CUTTING MACHINE Redcom BRAND EVL MODEL 25 18 YEAR 2008 About modular dual Plasma cutting torch, with stock drilling tools. Measurements: 18 x 2.5 mt Hypertherm HPR260 HSD130 models with torches and Generator CNC ESA/GV Datasheet available in the documents section For more information contact us at + 39 030 725026 machinery and vision from Monday to Friday from 8:30 to 13:00 and from 14:00 to 19:00

Diesel generators DEUTZ 8M816


4 PCS DEUZT 8M816 COMPLETE GENSETS ARE AVAILABLE FOR SALE READY FROM OUR TUZLA / ISTANBUL STOCKS

Dry cooler GUENTNER GDF 090.3D/2×7-LD1F/4P.E


GUENTNER GDF 090.3D/2×7-LD1F/4P.E Product number:M18-3174 Cooling capacity:700 kW Number of fans:14 Refrigerant:water/glycol Refrigerant Content:2 x 306 kg Voltage:400 Volt Motor power:14 x 0,47 kW Dimensions:9200 x 2450 x 2850 mm Weight:5000 kg Year:2016 Number in stock:1 piece(s) Price:Quotation request Very young and complete with control box (temperature regulated) Guentner dry cooler with 14 speedcontrolled (EC) fans. Mentioned capacity at +40°C/+30°C (in/out) and air temperature +25°C. Please visit our website: used-refrigeration

Dry cooler GUENTNER GFH 090.2B/2×5-N


GUENTNER GFH 090.2B/2×5-N Product number:M18-3173 Cooling capacity:997 kW Number of fans:10 Refrigerant:water/glycol Refrigerant Content:398 kg Voltage:400 Volt Power consumption:2,8/7,2 kW Motor power:10 x 2,8 kW Dimensions:12000 x 2291 x (1460) mm Weight:2700 kg Year:2009 Number in stock:2 piece(s) Price:Quotation request Very nice Guentner dry cooler(s) with 10 fans (890 RPM). The aluminum fins are as new! Mentioned capacity at +40°C/+35°C (in/out) at air temperature of +25°C. Please visit our website: used-refrigeration

Dry cooler GUENTNER GFH 090.2B/2×5-N


GUENTNER GFH 090.2B/2×5-N Product number:M18-3172 Cooling capacity:997 kW Number of fans:10 Refrigerant:water/glycol Refrigerant Content:398 kg Voltage:400 Volt Power consumption:2,8/7,2 kW Motor power:10 x 2,8 kW Dimensions:12000 x 2291 x (1460) mm Weight:2700 kg Year:2007 Number in stock:2 piece(s) Price:Quotation request Very nice Guentner dry cooler(s) with 10 fans (890 RPM). The aluminum fins are as new! Mentioned capacity at +40°C/+35°C (in/out) at air temperature of +25°C. Please visit our website: used-refrigeration

Nintendo wii China Nintendo wii acessoarie


We have stock of Nintendo Wee acesoaries and want to sell for 1 euro each - new Pls contact us for fotos

LATHE HORIZONTAL DAEWO0 PUMA 240 LC


CNC: FANUC Oi- TB YEAR: 2006 CORSE X 242 mm - 680 mm Z Ø Swing over bed mm 420 rotating diameter 400 mm on the wagon rotating over bed mm 570 turnable chuck Length 648 mm spindle speed 3500 aSA A2-8 hydraulic turntable 3 jaws std 254 mm 18.5 to 22 kW motor power STRUCTURE BANCALE INCLINED AT 45 ° CAST IRON ABOUT WEIGHT KG 5740 TOWER TWO-WAY AUTOMATIC 10 tool stations TAILSTOCK tailstock quill in attack cycle vices 4 diameter tube mm diam 75/80 boost pressure 40 bar 660 kg PRESETTING TOOLS DESCENT / ASCENT AUTO (WITH BUTTON AND CODE M) AUTOMATIC LUBRICATION SYSTEM COOLING SYSTEM HIGH PRESSURE 6 BAR COLLECTION TANK COOLANT 240 LITER TRANSPORTER shavings BELT WITH EXIT ON THE RIGHT CABINET ON UNIT WITH COOLER HALOGEN LIGHTING ZONE WORK LAMP YELLOW ALERT AND END OF CYCLE "CE" in the rules.

Cutting-To-Length Lines FIMI


band width 100 – 1.300 mm band thickness 0,30 – 3,00 mm tensile strength (until 2,2 mm thickness) max. 1.000 N/mm² yield strength (until 2,2 mm thickness) max. 820 N/mm² tensile strength (until 3,0 mm thickness) max. 800 N/mm² yield strength (until 3,0 mm thickness) max. 650 N/mm² elongation max. 20 % coil weight max. 30,0 t coil inside – Ø 508 / 610 mm coil outside – Ø 600 – 2.100 mm sheet length 250 – 3.000 mm package weight max. 5.000 kg package height incl. palette max. 560 mm inlet speed 15 m/min. working speed max. 90 m/min. pass line height app. 1.100 mm working direction left ? right the line consists of: stocking ramps for 2 coils min. coil outside diameter 900 mm entry coil car centering device decoiler motorized mandrel – Ø 508 / 610 mm press roll motorized outboard bearing Support coil opener telescopic press roll strip centering device crop shear – hydraulically scrap box transfer table leveler 6 HI 2 cassettes with leveling rolls cassette 1: no. – leveling rolls 19 leveling roll diameter 43 mm cassette 2: no. – leveling rolls 19 leveling roll diameter 52 mm no. – back up rolls 5 sets, upper and lower cassette quick change device felt cleaning device tachometer wheel pinch roll at shear entry rolls driven by DC motor rotary shear VECTRONIC pinch roll driven by AC motor strip belt conveyor at the VECTRONIC shear exit place for oiling machine (customer’s supply) sheets conveyors to scrap carriage and stackers deflecting conveyor with 3 positions scrap box movable by AC geared motor scrap carriage for scrap length of max. 1.100 mm connecting conveyor to stacker 1 connecting conveyor to stacker 2 automatic stacker units: stacker 1 non-stop operation for sheets up to 3.000 mm length stacking with wooden pallets stacker 2 non-stop operation for sheets up to 3.000 mm length stacking with wooden pallets lifting stacking platforms 2 pieces for sheets up to 3.000 mm length hydraulic hydraulic oil pressure 120 bar pneumatic normal compressed air pressure 6 bar electric three phase voltage 380 ± 10% V, 50± 2 Hz auxiliary voltage 220 ± 10% V, 50± 2 Hz solenoid valve voltage 24 V DC. total power consumption 480 KVA

Jackstone


Jacckstene vertical plate freezers.Details:Brand: Jackstone;Number of stations: 20 ;Number of blocks: 40Block size: 530 x 100 x 520 mm (L x W x H);Freezer dimensions: 3450 x 1600 x 1880 mm (L x W x H);Used refubrished in very good condition. Czamara company has more refrigeration Equipment in stock. If your firm is inerested in buying refrigeration machines check our website: sklep.czamara.net.pl and contact us. In stock we have branded equipment e.g. Bitzer, Copeland, Carrier, Gram, Gea, Lu-ve, Dorin, Güntner.

Tray sealing machines Turbo systems Heat sealer


Turbo systems Model: Heat sealer pot sealer stainless frame, currently set for 32 mini pots, 30mm diameter x 25mm depth, previously used for Knoss stock pots, adjustable temp controls, Mitsubishi Go T1000 PLC

CNC Boring Mills TITAN PAMA AFP 200


TYPE AFP 200 CNC – PAMA LICENCE - MACHINE TECHNICAL SPECIFICATION - Boring spindles diameter: 200 mm - Boring spindles taper: ISO-50 - Boring spindles speed: 1500 rpm - Main motors power: 100 kW - Rams section: 530 x 600 mm - Max. machining length: 19200 mm - Column 1 max. travel (X1 axis): 12800 mm - Column 2 max. travel (X2 axis): 12800 mm - Headstock 1 travel (Y1 axis): 4000 mm - Headstock 2 travel (Y2 axis): 5000 mm - Boring spindle travel (Z axis): 1100 mm - Ram travel (W axis): 900 mm - Travel Z + W: 2000 mm - Feeds on X, Y and Z axis: 0 – 8.000 mm/min - Feed on W axis: 0 – 6000 mm/min - Approx. weight without fix and rotary tables is about 210 t NOTE: 1. The max working extension of Z axis without ram (W axis) is 1100 mm. 2. The machine will work as a tandem unit and totally independent columns as well. STANDARD EQUIPMENT: - GE FANUC 16i-MB CNC - GE FANUC servo / spindle motors and drives - HEIDENHAIN linear measuring system on X, Y axis; - HEIDENHAIN rotary encoder on W axis; - GENERAL ELECTRIC, TELEMECANIQUE and EUROGI electrical equipment - ATOS, MP FILTRI, MARZOCCHI hydraulic equipment - METAL GENNARI telescopic covers on X axis - METAL GENNARI chip conveyor - Universal milling head (manual) type TU-80 – 2 pcs. - Fix tables 6000x2000 mm – 6 pcs. - Displaceable rotary table type MRD 3000x3000/2500 mm (60 tones) – 1 pc. - Displaceable rotary table type MRD 2000x2400/2500 mm (30 tones) – 1 pc

CNC Boring Mills TITAN PAMA AFP 200


TYPE AFP 200 CNC – PAMA LICENCE - MACHINE TECHNICAL SPECIFICATION - Boring spindles diameter: 200 mm - Boring spindles taper: ISO-50 - Boring spindles speed: 1500 rpm - Main motors power: 60 kW - Rams section: 530 x 600 mm - Max. machining length: 19200 mm - Column 1 max. travel (X1 axis): 12800 mm - Column 2 max. travel (X2 axis): 12800 mm - Headstock 1 travel (Y1 axis): 4000 mm - Headstock 2 travel (Y2 axis): 6200 mm - Boring spindle travel (Z axis): 1100 mm - Ram travel (W axis): 900 mm - Travel Z + W: 2000 mm - Feeds on X, Y and Z axis: 0 – 8.000 mm/min - Feed on W axis: 0 – 6000 mm/min - Approx. weight without fix and rotary tables is about 210 t NOTE: 1. The max working extension of Z axis without ram (W axis) is 1100 mm. 2. The machine will work as a tandem unit and totally independent columns as well. STANDARD EQUIPMENT: - GE FANUC 31i-MB CNC - GE FANUC servo / spindle motors and drives - HEIDENHAIN linear measuring system on X, Y axis; - HEIDENHAIN rotary encoder on W axis; - GENERAL ELECTRIC, TELEMECANIQUE and EUROGI electrical equipment - ATOS, MP FILTRI, MARZOCCHI hydraulic equipment - METAL GENNARI telescopic covers on X axis - METAL GENNARI chip conveyor - Universal milling head (manual) type TU-80 – 2 pcs. - Fix tables 4000x2000 mm – 12 pcs. - Displaceable rotary table type MRD 3000x3000/2500 mm (60 tones) – 1 pc. - Adapter L600mm pcs.2 - Universal milling head 20kW – pcs.2

Compressors Bitzer 6H-25.2Y


Semi-hermetic reciprocating compressors Bitzer 6H-25.2Y. Capacity: 110m3/h Price: on request Used refubrished in very good condition. Czamara company has more refrigeration Equipment in stock. If your firm is inerested in buying refrigeration machines check our website: sklep.czamara.net.pl and contact us. In stock we have branded equipment e.g. Bitzer, Copeland, Carrier, Gram, Gea, Lu-ve, Dorin, Güntner.

Cylindrical Grinding Machine KELLENBERGER 1000 U


Center distance: 1000mm, center height: 175mm, max. workpiece diameter: 349mm, max. table travel: 1300mm, table speed: 0.02-2,5m/min, swivelling range: 9°, max. cross slide travel: 285mm, grinding wheel dimensions: 400x50x127mm, rotational speed: 1500-2200mm, workpiece headstock swivelling range: 360°, length: 4000mm, width: 2000mm, weight: 3.1t.

POREBA TCF 200


CNC Horizontal Lathe POREBA Manufacturer: POREBA Model TCF 200 Technical datails: Swing over bed: 2000 mm Swing over carriage: 1680 mm Max.distance between centres: 10000 mm Centers’ height: 1000 mm Max. weight of workpiece in centers: 30000 kg Spindle drive motor power: 75 kW Headstock: spindle clearance: 105mm Chuck wheel diameter: 1600 mm Max. diameter of clamping in jaws: 1400 mm Min. diameter of clamping in jaws: 250 mm Bed: Bed width on the guides height: 1500 mm Bed height: 600 mm Carriage: Guides length of longitudinal carriage: 1400 mm Transversal carriage travelling: 500 mm Longitudinal feed range regulated stepless: 0,1 – 400mm / min Travelling feed range regulated stepless: 0,1 – 200 mm / min Longitudinal carriage skip travelling: 4000 mm / min Transversal carriage skip travelling: 2000 mm / min Longitudinal carriage torgue: 115 Nm Transversal carriage torgue: 65 Nm Tailstock: Pinion diameter: 280 mm Pinion line feed: 200 mm Pinion line feed speed: 300 mm / min Tailstock travelling speed: 1500 mm / min

Sliding headstock lathe TORNOS DECO 26a


2000 Z1 C1 + C axis Step bar dia 20 bar without preparation maximum length processable by headstock 240 mm spindle speed 8000 spindle motor power kw 5.5 (7.5) Z1-X1-Y1-Y2-X2-X3-X4-Y4-Z3-Z4-C1-C2 10 axes 2 axes c, 4 simultaneous contact tool X1-Y1 ...

spindle carving machine LA SCOLPITRICE 201 16-27


16-SPINDLE CARVING MACHINE - LA SCOLPITRICE 201 16-27 No. 16 tip-tailstock devices No. 16 double-exit spindles No. 2 double speed electric converter wheelbase 270 mm working lenght: 300 mm min - 1550 mm max devices for raw pieces positioning user m ...

Milling and Drilling Machine DECKEL FP 4


Rotational speed: 31,5-1600/min, clamping surface: 390x1000mm, clamping grooves number/ width/ distance: 4/ 16mm/ 90mm, longitudinal travel: 688-700mm, vertical travel: 440-450mm, headstock travel: 388-400mm, longitudinal/ vertical feed area: 10-500/ 5-25 ...

Drilling Machine WOTAN B 105 S


Drilling spindle diameter: 105mm, drilling spindle interior cone: ISO 50, drilling spindle longitudinal adjustment: 700mm, milling spindle mount: ISO 55, head stock vertical travel: 1250mm, rotational speed: 9-1000/min, feed rate: 0.03-12mm/U, rapid trave ...

CNC Milling Machines DAH LIH MCV 1020 BA


DAH LIH MCV 1020 BA machining center CNC Fanuc 0I-MC ISO 40 DIN 69871 TOOLS # 24 WORKING FIELD 1020x550x560 SPINDLE POWER 11/15kW CHIPIOLO CONVEYOR ENLARGEMENT of 2 GB MEMORY FRIDGE FOR LUBRICATING COOLING YEAR 2011 In STOCK AND REVISION, BELOW  ...

Gas engines MAN 2842LE322


Our Ref ENQ02399 Available ex stock Qty 1 brand new MAN 2842LE322- V12 turbo charged gas engine - 420kW Nat gas / 380kW bio gas. Available from a cancelled project. List price £104,000.00 GBP As this is from a cancelled project we can al ...

Diesel engines MTU 16V595


MTU 16V595 ENGINES 2 PCS AVAILABLE FROM READY STOCKS 3565 KW

Circular saws Martin T-72


Auction name: Machines, rolling stock and building materials in Amsterdam Online auction Start of auction: 25 April 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 08 May 2018 18:01 GMT +0200 (Western Europe (DST) The price listed is ...

Double-sided 5-axis pin bank


Auction name: Machines, rolling stock and building materials in Amsterdam Online auction Start of auction: 25 April 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 08 May 2018 18:01 GMT +0200 (Western Europe (DST) The price listed is ...

Combi-machines Brev.Celaschi


Auction name: Machines, rolling stock and building materials in Amsterdam Online auction Start of auction: 25 April 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 08 May 2018 18:01 GMT +0200 (Western Europe (DST) The price listed is ...

CNC controlled panel saws Holzma HPP23 / X / 38/22 / L


Auction name: Machines, rolling stock and building materials in Amsterdam Online auction Start of auction: 25 April 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 08 May 2018 18:01 GMT +0200 (Western Europe (DST) The price listed is ...

Heat exchangers Alfa Laval CLIP6-RH


Stock number: UG6204 Second hand, refurbished, stainless steel plate heat exchanger by Alfa Laval type CLIP 6-RH (C6). Plates designed in stainless steel AISI 316L. Working volume 68.2 l. Working pressure 16 bar, test pressure 21 bar. Working temperatur ...

LATHE TSUGAMI NP 11 (D)


Fanuc Control Bar capacity mm. 11 Main Head rpm 12000 Tailstock 8000 rpm Nr. 6 tools including 1 of motorized head 1 Nr. 2 tools to drill on test1 Nr. 2 positions for rear finishes Caricabarre Iemca

HORIZONTAL LATHE OKUMA LB 300 M


Year Built 2003 Numerical control OSP U 100 L turning diameter 340 mm Turning length (mm) 480 DISTANCE BETWEEN CENTER 500 MM ASA spindle 6 LAPS 4500 G / MIN SELF DIAM 250 SPINDLE HOLE DIAMETER 52 mm TOWER 12 STATION tailstock TOOL PRESETTING C ...

Format saws Robland Z320


Auction name: Stock and inventory construction company in Geesteren Online auction Start of auction: 18 April 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 30 April 2018 18:01 GMT +0200 (Western Europe (DST) The price listed is an o ...

Milling machines Kölle F45


Auction name: Stock and inventory construction company in Geesteren Online auction Start of auction: 18 April 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 30 April 2018 18:01 GMT +0200 (Western Europe (DST) The price listed is an o ...

Pen bank Vertongen P042510


Auction name: Stock and inventory construction company in Geesteren Online auction Start of auction: 18 April 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 30 April 2018 18:01 GMT +0200 (Western Europe (DST) The price listed is an o ...

Heidelberg GTOVP 52+


ref. 422 Heidelberg GTOVP 52+ format 36x52 cm, year 1995, 34 mio. imp., conventional dampening, electronic double sheet control, stock 0,03 – 0,4 mm, in production, price: 40 000 EUR FCA

TESSUTI ABBIGLIAMENTO E ATTREZZATURE


TEXTILES, CLOTHING & GEAR Single lot of stock fabrics, stock garments and textile equipment. For sale exclusively on next 10-30 10 may, at Bergamo (BS) For more information contact us at 030 – 7751645 between 9-13, 14-18

CNC Cylindrical Grinding Machine GP 650


Center width: 650mm, center height: 180mm, workpiece spindle tailstock: MK 4, disc diameter: 500mm, internal grinding spindle travel: 10mm, rotational speed: 30000-45000/min, control: SIEMENS 840Dsl.

Man Roland Rekord RZK 3B E


Man Roland Rekord RZK 3B Year: 1992 Serial: 22787 RCI II Remote Control 1+1 / 2-0 Perfector Epic Delta Alcohol Dampening Royce Recirculation Chiller Ready in stock Cleaned and Checked Available immediately

axis lathe Excel 320/600


1997 ASA 8 VDI 40 turret bar passage 70 mm tailstock CNC FANUC 0-T chip conveyor chuck included

Horizontal CNC lathe AVM ANGELINI DG 13


2000 Control Fanuc 21 iT Spindle nose ASA "8" Chuck diam. 315 Turret 12 positions VDI 40 Hydraulic tailstock body with loop Chip conveyor with high-pressure pump Vaulting mm. 500 Turning diameter mm. 380 Turning length mm. 800 Bar capacity mm. 9 ...

Lathe ALEX-TECH VIPER VT 40A/3000


Swing: 980mm, turning diameter: 740mm, turning length: 3000mm, max. spindle diameter: 1100/min, hollow spindle diameter: 235mm, chuck diameter: 457mm, motor power: 55kW, x-travel: 450mm, z-travel: 3000mm, number of revolver tool slots: 12, quill stock tra ...
Find used machinery dealers in your country