Volt: 220-240VAC // Amps. 1.8 // Hz: 50/60 // Ph: 1 // Kw: 0.4 WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjus ...

M. No.: 409091063 Equipment / Additional information: WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable in ...

M. No.: 402111082 Equipment / Additional information: WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable in ...

Size: 240 x 350 mm Equipments: length 115 cm power consumption 230 V, 50 Hz Height: Variable from 90 - 116 cm max. pass-trought width 24 cm width 50 cm Compatible with all 36 x 52 printing machines, regardless of the feeder system (stream feeder / single sheet feeder) Short set-up time, efficient use from 1000 envelopes serial no 20391212

Reference Num.: 3463 Brand: Kuvertanleger / Envelope Feeder Type: UEK 335 Construction year: 1988 Available: directly Status: In production Location: Deutschland ...

• more information

AUTOMATIC FEEDER FOR HERRING, SARDINE, BAADER 478 The usefull capacity of the BAADER 36 and 134 herring filleting machine can be increased by a combination with the BAADER 478 automatic feeder wich aligns herring, sprats, sardines and similar fish and feeds them to the processing machine. A variable-speed elevator raises the fish from a water filled hopper and delivers them uniformly to five feed channels. Fish traveling head forward are led directly to the timing device. Fish with tail leading are turned around. The timing device releases single fish synchronized wuth the processing machine and transports them through a back and belly aligning device into the feed troughs of the processing  ...

AUTOMATIC FEEDER FOR HERRING, SARDINE, BAADER 488 Technical description: Power supply: 400 V, 50 Hz, 3 Ph Approx dimensions: 3100 x 1400 x 1900 mm It can be combined with Filleting machine for herring, sardine and mackerel Baader 35 ...

• more information

Manufacturer: K-Tron Model: LWF D5-S + K2M - T20 Type : Twin screw feeder / double screw dosing unit Dosing : volumetric gravimetric Filler mounted on weighing platform Product : powders / granules Motor : 0,45 KW - 2000 rpm Speed reduction : Min: 16,1:1 -> 124 rpm Max: 3.22:1 -> 621 rpm Hopper volume: 50 L Hopper mixing: plow + blade 4 oil dampers Capacity: 275 L / h depending on product. Does not include electrical or safety controls. These elements can be quoted separately.

Multisaw ZLT 500 edger with 500/120 feeders – Czech production – a movable shield with the possibility of installing several shields TECHNICAL PARAMETERS: cutting width 500 mm cutting height 120 mm Min. material length 800 mm .max. disc diameter 450 mm one disc movable sleeve 70 mm fixed sleeve length 100 mm engine power 45 kW two upper pressing rollers four lower pulling ones feed smoothly adjustable on the inverter shaft support two rows of pawls max material width 700 mm length of feed rollers 3000 mm roll width 700 mm roll diameter 70 mm receiving table 6200 mm chain width 60mm seven pressure rollers two bottom pull rollers transport dimensions (length / wi ...

General SKU245P359 LocationBarneveld MakeMikropul Gmbh (DE) Type9-4 SC PSR No.4461 Year of construction1984 Main Features MaterialStainless steel Surface4 m2 Specified Features - Envelope filter Envelope filtercheck Filter surface4 m² Number of envelopes:9 Envelope sizesdia.120mm x1200mm Cleaning by air pulsecheck MaterialStainless steel Information Floorspace1,2x1,0 M Total height3,1 M Weight400 KG Extra Specificationswith extra filters easy change systemEnvelope filtersHosokawa MikropulDust separators > Envelope filtersBrand > Hosokawa Mikropul What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shippi ...