We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Material: stainless steel Engine: 55 kW Content: 1750 ltr Weight: 3500 kg Length x Width x Height: 3800 mm x 1900 mm x 2300 mm Chopper: 22 kW The machine is like new. We have completely overhauled this machines in 2010. We design and build your entire plant exactly to your needs from new and used machines. Are you looking for something else? Write us below!
used
We offer all kinds of electronic componentes for URBAN and Elumatec machines. Contact us on spares@finke machines
used
Rapid mixer,stainless steel,with timer and safety cut off.
used
Rapid mixer,stainless steel,with timer and safety cut off.
used
Rapid mixer,stainless steel,sliding draught outlet in the bottom,Ø 815 mm.
used
Rapid mixer,stainless steel,with timer and safety cut off.
used
Rapid mixer,stainless steel,timer function and safety cutout,for powder
used
Rapid mixer,stainless steel,type 250 S,hydraulic lower/raise function.
used
Rapid mixer,stainless steel,standing on foot console,Ø 1045 mm
used
Rapid mixer,stainless steel,timer function and safety cutout,for powder
used
Rapid mixer,stainless steel,timer function and safety cutout,for powder
used
Rapid mixer,stainless steel,hydraulic lift,Ø 1200 mm.
used
Rapid mixer,stainless steel,with timer and safety switch,spray function.
used
Drilling capacity: 40 mm Radius: 800 mm Spindle taper: 36 SPECIFICATIES Uitlading / arm lengte 800 mm Boor capaciteit 40 mm Boor capaciteit staal Ø 40 mm Boor capaciteit gietijzer Ø 50 mm Tap capaciteit M M 36 Spindel pinole opname Mk Sk 40 Spindel diameter Ø 195 mm Spindel pinole slag 200 mm Max. afstand spil - tafel 695 mm Tafel / voet afmeting lengte x breedte 1200 x 750 mm Vermogen kW 5.5 kW Toeren - Snelheden - Stappen 2800 Rpm
used
Rapid radial drilling machine make GENKO type ATB 30 SYear 1972Drilling capacity i. ST 60:25 mmDrilling assets i. ST 60:32 mmSpindle mount MK 3Quill stroke 150 mmDistance spindle / base smallest/biggest 620 / 1800 mmRadial arm adjustable vert. 1180 mmMovement horizontally on carriage mot.: 1900 mmMovement of the boom hor. 600 mmBoom rotatable by 360 °Spindle head tiltable on both sides up to 45 °14 spindle speeds 22 - 1920 rpm.3 aut. Feeds 0.1; 0.2; 0.3 mm / rev.Drive power 1.5 kWWeight approx 1.5 tExternal dimensions approx 3350 x 700 x 2800 mmWith- aut. feed- hydr. central locking- Tapping device- motor stroke movement- central hydr. clamping- motorized travel = 1900 mm on base carriageused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be ple ...
used
Rapid radial drilling machine make VOLZ (ADRIASTROJ) type BRB-32FMachine -No: 4/97/12 built in 1997Technical specifications:Drilling capacity in St: 3 - 32 mmDrilling capacity in Gg: 3 - 40 mmThread cutting in St: M2 - M32Thread cutting in Gg: M2 - M33Morse taper: MK 4Quill stroke: 180 mmmin. Distance spindle / column: 380 mmSwiveling the boom: 360 °min./max. Distance table / spindle: 115/625 mmClamping surface: 1050 x 400 mmInfinitely variable spindle speeds: 12.5 - 3150 mm6 automatic feeds: 0.04 - 0.4 mmMotor power: 4.0 kWWeight approx: 2200 kgExternal dimensions approx .: 1900 x 1200 x 2200 mmWith- cooling device- Electromagnetic clutch- brake motorused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are alw ...
used
Rapid mixer,stainless steel,draught outlet in the bottom,start/stop function.
used
servocontroller for Rapid DGL double mitre saws we can deliver this controller suitable with firmware and parameters "plug and play" for all Rapid DGL machines with controller system PCE5000 new- or reparied units with 2 years warranty Contact us for more information
used
Rapid radial drilling machine, radial drilling machine, drilling machine, boom drilling machine -Clamping table: 500 x 1055 mm -Projection: 1120 mm -Cone mount: MK4 -Motor power: 1.5/2.2 kW -Speeds: 45-2240 rpm, electrically switchable in steps -Columns: Ø 150 mm -Spindle stroke: 160 mm -Tapping device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 2000/1200/H2320 mm -Weight: 1800kg
used
Rapid radial drilling machine, radial drilling machine, drilling machine, boom drilling machine -Clamping table: 400 x 1100 mm -Projection: 930 mm -Cone mount: MK4 -Motor power: 1.35/1.8 kW -Speeds: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Tapping device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg
MCM00B0-SMLT Micro Design
used
Description: Rapid radials with - Advance - Thread cutting device - Tool holder with tools - Coolant system see pictures Drilling capacity in steel 32 mm Drilling capacity in cast iron 40 mm Workpiece height - max. 550 mm Table clamping surface 1530 x 750 mm Spindle holder MK 4 Projection 1000 mm Drill spindle stroke 170 mm Spindle speeds 38 - 2000 rpm Operating voltage 380 V Connected load 5.0 kW Machine weight approx. 2.0 t Space requirement approx. 2.0 x 1.6 x 2.1 weight approx.: 2,000 kg, Approx. Onsite Dimension. (l x w x h): 2,000 x 1,600 x 2,100 mm
used
CONTROLS NC controls WORKING RANGE - BORING drilling capacity full bore (steel): 40 mm throat (max): 800 mm SPINDLE / HEAD spindle revolutions (min): 335 /min spindle revolutions (max): 1800 /min number of gears: 2 tool fixture: MK 4 TECHNICAL SPECIFICATION table surface (left-right): 1000 mm table surface (front-back): 500 mm ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 2500 mm space requirements -front/back-: 1250 mm total height: 2500 mm - 9`600h operating hours - div. tool holders, - coolant system - with cube table
used
1 work place certified, very well received., absolutely Mint double girder overhead travelling crane with helical rope stabilized LEG / DEMAG trolley Load approx. 2 x 4,000 = 8000 kg capacity of the hub works about 2 x 6,300 = 12,500 kg Wingspan approx. 10.880 mm Hook path about 10,000 mm Make SCHEFFER Year of production/workshop test 1996/2016 Crane classification H 3 B 4 Crane equipped with: -De-MAG lifting works in FEM 3 m, schrägseilstabiliert -Demag Crane and trolley motors -Radio control -Magnetic control -Magnetic beam with sheet metal magnet -SCHENCK weighing device -Long travel with frequency inverter control Working speeds: Hoist around 1.2/12.5 m / min Trolley gear approx. 8.0/32.0 m / min Crane chassis approx. 5.0 80.0 m / min
used
1 neuwertiger, factory-tested single overhead travelling crane with angle trolley Oblique cord stabilization for traverse operation Payload 10.000 kg Span approximately 15,850 mm make VOITH Year of production/workshop test 1995/2016 Lasting only 1 year equipped in a space-saving design with angle trolley and inclined stranding to the load-stabilisation (magnetic control prepared, but not included in the delivery), trolley with frequency control operating speeds, cradle frame, radio remote control: Hoist load approx. 0 8.3 m / min Load approx. 0 22.0 m / min Trolley gear 0-40.0 m / min Crane chassis 0-60.0/90.0 m / min