Category: 106 presses / Hydraulic Fine Blanking Presses
Latest update: 23.10.2023 add to watchlist
approved
dealer
item-No.: 162022157
New in: 1988

used

check Seller: ZOMA Maschinenhandel
Location: 04838 Eilenburg Land-de

add to watchlist

Manufacturer: SMG / Feintool Type: HFA 6300 Year of construction: 1988 Total force: 4000-6300 kN Ring serrated force: 320-3200 kN Counter holding force: 130-1300 kN Safety distance: 153 mm Trailing distance max. 10 mm Closing speed: 120 mm/s Plunger stroke beu max tool height: min.-max. 30-150 mm Tool clamping surface at the top: 900 x 900 mm Tool clamping area at the bottom: 910 x 1350 mm Tool installation height max: 410 mm Tool installation height min: 330 mm Main drive: 90 kW Total connected load: approx. 120 kW Weight of the press: approx. 31 t

Category: 106 presses / Hydraulic H-Frame Presses
Latest update: 25.03.2024 add to watchlist
approved
dealer
item-No.: 151304721
New in: 1984

used

check Seller: EnTeHa GmbH & Co.KG
Location: 69517 Gorxheimertal Land-de

add to watchlist

N° 0214: 1 gebr. Hydraulic quick-stroke two-stand press Fabr. SMG, Type DS 63, Bauj. 1984 with pressing force 630 kN, retraction force 51 kN Arb.-Ber.: Table area 660 x 460 mm, drive power: 15 kW Accessories: The press was upgraded to UVV 11.064 VBG 7n5.2 in 1991. Other: Light width between the stands 680 mm, max. distance between table top and pestle 385 mm, ejector force 15 kN largest pestle stroke 150 mm.

Category: 106 presses
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 157811450

used

check Seller: Muller Machines SA
Location: Land-ch

add to watchlist

Capacity: 0 t Table length: 0 mm Table width: 0 mm Stroke: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 1600 kN Total stroke: 300 mm Execution: 4 columns Table surface: Length: 1000 mm Width: 850 mm Return power: 119 kN Depth of throat Passage between columns: longitudinal: 645 mm Lateral: 405 mm Slide clamping surface: Width: 1000 mm depth: 850 mm Close traverse speeds: Rapid traverse: 400 mm/s Press stroke: 10 - 60 mm/s Return traverse speeds: 400 mm/s Oil quantity: 350 l Voltage 50 Hz 3x: 380 Volt Motor power: 45 kW Machine´s weight about: 13000 kg Overall dimensions machine: Length: 2100 mm Width: 1200 mm Height: 3900 mm Various accessories: Security/savety device: SICK Roll-feed Useful cylinder length: 250 mm Decoiler: Manufacturer: DREHER 2380DM 400 mm Straithening device: DREHER 400 x 4 mm

Category: 106 presses / Hydraulic Presses
Latest update: 27.03.2024 add to watchlist
approved
dealer
item-No.: 159473416
New in: 1994

used

check Seller: MASZYNERIA SP. Z O.O.
Location: Land-pl
Price: 119.025 € add to watchlist

SMG DS 315-1500/1300 CNC hydraulic press was manufactured in 1984 in Germany. The machine, consisting of two interconnected stations, is used for pressing metal workpieces in manual, semi-automatic and automatic mode with a pressing force of up to 315 tonnes. All the machine’s machining parameters are set using a CNC control with a full-colour, touchscreen display. The press is equipped with a hydraulic and pneumatic sheet metal feeder, servo drives for feed rollers to set a very precise stroke of up to 0.1 mm, safety cages and workpiece feed and drop control sensors. The SMG 315 T machine underwent a complete overhaul in 2007, during which components such as pumps and safety installations were replaced. Technical data of the SMG DS 315-1500/1300 press - maximum press force: 315 t - working table dimensions (L x W): 1500 x 1300 mm - upper machine point (from the table): 750 mm ...

Category: 106 presses / Punching Presses
Latest update: 26.02.2024 add to watchlist
approved
dealer
item-No.: 161112687

used

check Seller: Sidermac machine tools srl
Location: 31046 Oderzo Land-it

add to watchlist

Used SMG HZPUX 350/200 - 1500/1300 moulding press in good condition! Main technical data: - Power: 510 ton - Maximum span with castle: 1460 mm - Minimum light with castle: 520 mm - Maximum span without castle: 2160 mm - Minimum light without castle: 1220 mm

Category: 109 other metal working machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 149172350
New in: 2020

new

check Seller: FH-SMG
Location: 7547S Enschede Land-nl
Price: 627 € add to watchlist

Pneumatic riener for ship rivets Comes with the following accessories, 1 x impact bolt for round head 16 mm 1 x impact bolt for round head 22 mm

Category: 109 other metal working machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 149172352
New in: 2020

new

check Seller: FH-SMG
Location: 7547S Enschede Land-nl
Price: 652 € add to watchlist

Pneumatic riener for ship rivets Comes with the following accessories, 1 x impact bolt for round head 20 mm 1 x impact bolt for round head 22 mm 1 x impact bolt for round head 25 mm Description M22 Weight Weight 9.2 Length mm Length mm 475 Risense size Risense size M22 Cill diameter mm rinie size 22 Impact energy Hz. Impact energy Hz. 20 Air Consumption L / sec. Air Consumption L / sec. 20 Stroke frequency J. J. Stroke frequency J. J. 35 Working pressure Mpa working pressure Mpa 0.63 Inner tube diameter mm inner diameter mm hose 16

Category: 106 presses
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 156885910
New in: 1978

used

check Seller: Maschinen Schwartpaul GmbH
Location: Lager Plettenberg-Siesel Land-de

add to watchlist

pressure: 25 t distance between columns: 580 mm stroke: 150 mm dayligth: 370 mm table surface area: 560x400 mm ram surface: 400x350 mm hole in the table: 80 mm weight of the machine ca.: 2,5 t dimensions of the machine ca.: 1500x500x2500 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses / Double Column Pulling Presses
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 157045288
New in: 1963

used

check Seller: ATMH werkzeugmaschinen-Handel GmbH
Location: Land-de

add to watchlist

pressure: 250 t distance between columns: 1650 mm stroke: 900 mm table-size: 1600 x 1000 mm total power requirement: 65 kW weight of the machine ca.: 31 t dimensions of the machine ca.: 3 x 2 x 5 m Cushion in table. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 109 other metal working machines
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 160453514
New in: 2000

used

Location: Land-de
Price: 55.000 € add to watchlist

pressure: 250 t distance between columns: 1650 mm stroke: 900 mm table-size: 1600 x 1000 mm total power requirement: 65 kW weight of the machine ca.: 31 t dimensions of the machine ca.: 3 x 2 x 5 m Cushion in table. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 106 presses / Double Column Pulling Presses
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163127015
New in: 1978

used

check Seller: Maschinen Schwartpaul GmbH
Location: Lager Plettenberg-Siesel Land-de

add to watchlist

pressure: 40 t distance between columns: 600 mm stroke: 150 mm table surface area: 600x410 mm ram surface: 220x130 mm table height: 850 mm weight of the machine ca.: 2,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 107 sheet metal working
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163675094
New in: 2004

used

check Seller: Goedicke Werkzeugmaschinenhandels GmbH
Location: Freudenberg

add to watchlist

band width:1050 mm plate thickness:8 mm number of rolls:8 DECOILER:. - design : single coil :. - sheet width max:1050 mm - sheet width (min):150 mm - max. weight of coil:22 to - max. diameter of coil:2000 mm - min. internal diameter of coil:570 mm FEEDERS:. - feeder: type : roll feeder :. - sheet width max:1050 mm - sheet thickness max:150 mm LEVELER UNIT:. - sheet width max:1050 mm - sheet width (min):150 mm - sheet thickness max:8 mm - sheet thickness (min):2.5 mm - number of leveler rolls:8 - diameter of leveler rolls:96 mm - distance between leveler rolls:104 mm - diameter of feed rolls:160 mm - feed velocity min.:2 m/min - feed velocity max.:43.5 m/min ELECTRICAL SPECIFICATIONS:. - mains voltage:400 V - mains frequency:50 Hz Technical description : Sheet metal unrolling and straightening system for thick sheet metal up to 8 mm, consisting of: - LAWECO COIL LOA ...

Category: 106 presses
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163675636
New in: 1982

used

check Seller: Vögtle Service GmbH
Location: Lager Eislingen, Baden-Württemberg

add to watchlist

pressure:200 t distance between columns:2100 mm stroke:550 mm Distance table/ram, stroke up:1800 mm table surface area:2000 x 2800 mm table height over floor:760 mm ram surface:2000 x 2000 mm Side window:2000 mm feed down:400 mm/s power requirement:51,0 kW weight:33,0 t dimensions (WxDxH):3,25 x 3,5 x 5,4 m Height above floor:5,4 m foundation pit:not necessary

Category: 106 presses
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163675637
New in: 1982

used

check Seller: Vögtle Service GmbH
Location: Lager Kehl, Baden-Württemberg

add to watchlist

pressure:200 t distance between columns:2100 mm stroke:550 mm Distance table/ram, stroke up:1800 mm table surface area:2000 x 2800 mm table height over floor:760 mm ram surface:2000 x 2000 mm Side window:2000 mm feed down:400 mm/s power requirement:52,0 kW weight:33,0 t Dimensions (WxDxH):3,25 x 3,5 x 5,4 m Height above floor:5,4 m foundation pit:not necessary

Category: 106 presses
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163675643
New in: 1977

used

check Seller: Vögtle Service GmbH
Location: Lager Eislingen, Baden-Württemberg

add to watchlist

pressure:250 t distance between columns:930 mm stroke:200 mm Distance table/ram, stroke up:600 mm table surface area:900 x 860 mm die cushion capacity:100 t die cushion stroke:50 mm die cushion area:350 x 400 mm table height over floor:950 mm side window:380 x 380 mm ram surface:850 x 700 mm feed down:400 mm/s feed up:400 mm/s working feed:30 mm/s oil volume:350 l power capacity:45,0 kW weight:11,5 t Dimensions (WxDxH):2,0 x 1,2 x 3,4 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic depth stop:mechanical foundation pit:not necessary

Category: 106 presses
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163675661
New in: 1978

used

check Seller: Vögtle Service GmbH
Location: Lager Salach, Baden-Württemberg

add to watchlist

Pressure:500 t distance between columns:1550 mm stroke:600 mm distance table/ram, max. stroke up, adjustment up:900 mm table surface area:1200 x 1300 mm pressure of drawing cushion in table:250 t stroke of drawing cushion in table:150 mm die cushion area:950 x 950 mm table height over floor:1245 mm side window:1250 mm ram surface:1200 x 1300 mm speed down:750 mm/s speed up:780 mm/s working speed:105 mm/s oil volume:4000 l power requirement:263,0 kW weight:45,0 t Dimensions (WxDxH):3,3 x 3,3 x 6,1 m height over floor:6,1 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic cutting impact cushioning:motoric adjustable

Category: 106 presses
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163675693
New in: 1978

used

check Seller: Vögtle Service GmbH
Location: Lager Netphen

add to watchlist

pressure:800 t distance between columns:3010 mm stroke:300 mm distance table/ram, max. stroke up, adjustment up:1350 mm table surface area:3000 x 1800 mm table height over floor:500 mm side window:1500 x 1400 mm ram surface:3000 x 1800 mm speed down:300 mm/s oil volume:900 l height over floor:5,4 m height beneath floor:2,1 m power requirement:200,0 kW weight:80,0 t Dimensions (WxDxH):5,2 x 2,6 x 7,5 m ram interlocking:in TDC depth stop:mechanical

Category: 106 presses
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163675729
New in: 1979

used

check Seller: Vögtle Service GmbH
Location: Lager Salach

add to watchlist

pressure:63 t throat:320 mm stroke:200 mm distance table/ram, max. stroke up, adjustment up:450 mm table surface area:750 x 600 mm pressure of drawing cushion in table:6,5 t stroke of drawing cushion in table:80 mm die cushion area:240 mm table height over floor:800 mm ram surface:500 x 450 mm capacity of ejector in ram:0,5 t ejector stroke in ram:70 mm speed down:300 mm/s speed up:300 mm/s working speed:50 mm/s oil volume:380 l power requirement:12,0 kW weight:6,5 t dimensions (WxDxH):1,3 x 2,0 x 2,75 m drawing cushion in table:hydraulic ejector in ram:hydraulic depth stop:mechanical cutting impact cushioning:hydraulic

Category: 106 presses
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163675755
New in: 1975

used

check Seller: Vögtle Service GmbH
Location: Lager Salach, Baden-Württemberg

add to watchlist

Pressure:200 t distance between columns:1910 mm stroke:600 mm distance table/ram, max. stroke up, adjustment up:800 mm table surface area:1900 x 1150 mm pressure of drawing cushion in table:80 t stroke of drawing cushion in table:300 mm die cushion area:1500 x 950 mm table height over floor:800 mm side window:1000 mm ram surface:1900 x 1100 mm return capacity:36 t speed down:400 mm/s speed up:170 mm/s working speed:30,5 mm/s oil volume:1500 l height over floor:4,85 m height beneath floor:2,6 m power requirement:45,0 kW weight:38,0 t dimensions (WxDxH):3,05 x 2,8 x 5,55 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulic

Category: 106 presses
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163675847
New in: 1982

used

check Seller: Vögtle Service GmbH
Location: Lager Salach, Baden-Württemberg

add to watchlist

pressure:160 t throat:450 mm stroke:300 mm distance table/ram, max. stroke up, adjustment up:580 mm table surface area:1000 x 1000 mm die cushion capacity:20 t die cushion stroke:300 mm ram surface:700 x 750 mm feed down:400 mm/s feed up:400 mm/s table height over floor:1350 mm die cushion area:Ø 350 mm power capacity:55 + 11 kW weight:19,5 t Dimensions (WxDxH):1,5 x 3,5 x 4,6 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulisch depth stop:mechanisch

Category: 106 presses
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163676423
New in: 1989

used

check Seller: Pressen HAAS GmbH
Location: Land-de

add to watchlist

Pressure total: 1400 ton Stroke: 950 mm Daylight: 2000 mm Table surface area : 3600 x 2500 mm Slide area: 3600 x 2500 mm Die cushion capacity in table: 400 ton Die cushion stroke: 500 mm Die cushion pad area: 3060 x 1860 mm Approach speed: 400 mm / sec Working speed: 40 / 80 mm / sec Return speed: 400 mm / sec Oil volume: 5000 l Required power: 450 kW Weight of machine approx.: 240 ton

Category: 106 presses / Blanking Presses
Latest update: 25.12.2023 add to watchlist
item-No.: 95804496

new

Seller: NORDPRÄZISION Werkzeugfabrik GmbH
Location: Land-de

add to watchlist

A roll punching press for stamping is available up to A3. The die is pulled under the roll.

Category: 106 presses
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 157048246

used

check Seller: Muller Machines SA
Location: Land-ch

add to watchlist

Capacity: 0 t Number of strokes per/min: 0   Table length: 0 mm Table width: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 15 to Stroke: (stepless) from: 200 s/min up to: 500 s/min Execution: 4 supports Table surface: Length: 320 mm Width: 250 mm Thickness: 60 mm Table relieving: Length: 250 mm Width: 140 mm Cut edge: 300 mm2 Slide adjustment: 60 mm Slide stroke: 24 mm slide bore diameter: 25 mm Distance table to slide nose: max: 211 mm Passage between the supports: longitudinal: 320 mm Lateral: 170 mm Voltage 50 Hz 3x: 380 Volt Power: 3.5 HP Machine´s weight about: 1800 kg Overall dimensions machine: Length: 1350 mm Width: 850 mm Height: 1950 mm Various accessories: Automatic feed: number: 2 Execution: rolls max. stroke: 100 mm Straightening device

Category: 106 presses
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 157048300

used

check Seller: Muller Machines SA
Location: Land-ch

add to watchlist

Key data: 15 , 500

Capacity: 15 t Number of strokes per/min: 500   Table length: 0 mm Table width: 0 mm Technical data Pressure: 15 to Stroke: (stepless) from: 200 s/min up to: 500 s/min Execution: 4 supports Table surface: Length: 320 mm Width: 250 mm Thickness: 60 mm Table relieving: Length: 250 mm Width: 140 mm Cut edge: 300 mm2 With pressing power: downside up Slide adjustment: 60 mm Slide stroke: 24 mm slide bore diameter: 25 mm Distance table to slide nose: max: 211 mm Passage between the supports: longitudinal: 320 mm Lateral: 170 mm Voltage 50 Hz 3x: 380 Volt Power: 3.5 HP Machine´s weight about: 1800 kg Various accessories: Automatic feed: number: 1

Category: 106 presses
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 157811479

used

check Seller: Muller Machines SA
Location: Land-ch

add to watchlist

Capacity: 0 t Number of strokes per/min: 0   Table length: 0 mm Table width: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Pressure: 30 to Stroke: (stepless) up to: 900 s/min Execution: 4 supports Table surface: Length: 425 mm Width: 350 mm Table relieving: Diameter: 85 mm Slide stroke: 10 mm slide bore diameter: 38 mm Passage between the supports: longitudinal: 455 mm Voltage 50 Hz 3x: 380 Volt Power: 5.5 kW Machine´s weight about: 1950 kg Overall dimensions machine: Length: 1500 mm Width: 1000 mm Height: 2000 mm Various accessories: Automatic feed: number: 1 Execution: rolls Electro-pneumatic clutch Security/savety device

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
SMG 3rd category level
  • SMG double column pulling presses (2)
  • SMG hydraulic fine blanking presses (1)
  • SMG hydraulic h-frame presses (1)
  • SMG hydraulic presses (1)
  • SMG punching presses (1)
 
RESALE used machinery 25 years online