Category: 101 boring mills and machining centers / CNC Boring Mills
Latest update: 01.02.2024 add to watchlist
approved
dealer
item-No.: 163270160

used

Location: Land-cz

add to watchlist

SKODA W200GNR 1978 /CNC MEFI 836 y.m. 2005 ball screws y 4150mm x 8000mm millng heads floor plates 5600x1885x400 rotary table E20 load 20tons

Category: 101 boring mills and machining centers / Boring Mills
Latest update: 31.08.2023 add to watchlist
approved
dealer
item-No.: 136406287

used

Location: Land-cz

add to watchlist

Skoda W 160 H/NR CNC Travel x= 14.500mm (bed is for the travel 18,500mm) Travel Y= 3.150mm Travel Z= 1.600mm Travel W= 1.250mm Spindle diameter 160mm Machine with ball screw Many accessories available: CNC control Siemens SINUMERIC 850 Rotary table ISO 16 2.200 x 2.200mm, capacity 16 ton included Chip conweyor : 19.000 mm + 12.000 mm Floor plates

Category: 101 boring mills and machining centers / Boring Mills
Latest update: 31.08.2023 add to watchlist
approved
dealer
item-No.: 136406288
New in: 1979

used

Location: Land-cz

add to watchlist

W 200G with Siemens AC main motor. modernized the main drive by instalation of Siemens AC motor with SIMODRIVE 611. Original built ISO 60 taper and 630 rpm Main data: X=8000 mm Y=4150 mm Z =1600 mm W=2000 mm Spindle dia 200mm ISO 60 spindle speed max 800 rpm Accessories: DRO Philips available as original rotary table E 20 4 floor plates 5600x1880x400mm milling head IFH 1 and IFW 3 counter steady SKODA IOT 4150

Category: 101 boring mills and machining centers / Boring Mills
Latest update: 18.12.2023 add to watchlist
approved
dealer
item-No.: 158786952
New in: 1966

used

check Seller: ENGINEX KOSICE
Location: Land-sk

add to watchlist

axis X x Y x Z x W: 3350x2510x1600x1600 mm 3 pcs plate 1500x4000x200 mm 1x table SKODA OB20281, diameter 1600x1600 mm, new in 1971 with tools, accessories and screw compressor weight of machine with table 47,5 ton refurbished 2010

Category: 101 boring mills and machining centers / Boring Mills
Latest update: 01.02.2024 add to watchlist
approved
dealer
item-No.: 163270175

used

Location: Land-cz

add to watchlist

W160HC with ISO 50 y.m. 1987 xtravel 4000mm y travel 3150mm rotary table S35C load 35tons, 3150 x 2800mm milling heads, tools

Category: 101 boring mills and machining centers / Boring Mills
Latest update: 01.02.2024 add to watchlist
approved
dealer
item-No.: 163270176

used

Location: Land-cz

add to watchlist

Table capacity 80 TONS Clamping plate width mm 3550 length mm 4000 Carriage travel V mm 2000 Heidenhain scale Rotary axe B ROD 700 Table height mm 1460 Table weight kg 52000

Category: 101 boring mills and machining centers / Boring Mills
Latest update: 20.02.2024 add to watchlist
approved
dealer
item-No.: 163400186
New in: 1997

used

check Seller: ENGINEX KOSICE
Location: 040 0 Kosice Land-sk

add to watchlist

HBM W200HE-NC, control system Siemens Sinumerik 840 CE with digital display, ISO 50, axis: X: 9500 mm, Y: 2750 mm, Z: 2000 mm, W: 1600 mm

Category: 101 boring mills and machining centers / Boring Mills
Latest update: 21.02.2024 add to watchlist
approved
dealer
item-No.: 163407210
New in: 1996

used

check Seller: ENGINEX KOSICE
Location: 040 0 Kosice Land-sk

add to watchlist

HBM SKODA WPD 30. Axis: X-8000 mm Y-2500 mm Z-1365 mm

Category: 101 boring mills and machining centers / Boring Mills
Latest update: 28.02.2024 add to watchlist
approved
dealer
item-No.: 163466216
New in: 1982

used

check Seller: ENGINEX KOSICE
Location: 040 0 Kosice Land-sk

add to watchlist

HBM W 160 H, CNC Heidenhain iTNC 530, new 1982, after repairs 2009, spindle taper Morse 100, are reductions from M 100/HSK80

Category: 101 boring mills and machining centers / Boring Mills
Latest update: 28.02.2024 add to watchlist
approved
dealer
item-No.: 163466217
New in: 1969

used

check Seller: ENGINEX KOSICE
Location: 040 0 Kosice Land-sk

add to watchlist

HBM WI 130 CNC Heidenhain iTNC 530, new 1969, after repairs 2008, spindle taper M 80/HSK 80

Category: 101 boring mills and machining centers
Latest update: 29.03.2024 add to watchlist
item-No.: 163469185

used

Seller: Exapro
Location: Land-it

add to watchlist

CNC SELCA 1200 Race X-axis 3200 mm Y-axis 2100 mm Z axis 1000 mm Drilling axis mm 1500 Turntable mm 2000

Category: 101 boring mills and machining centers
Latest update: 29.03.2024 add to watchlist
item-No.: 163521549
New in: 1982

used

Seller: Exapro
Location: Land-cz

add to watchlist

Working spindle diameter: 160 mm Spindle taper: clamping 100 metric Spindle speed: 800 rpm Clamping surface of the table: 4000x9000 mm Working transverse feed - x-axis: 9000 mm/min Working longitudinal feed - axis z: and W 1500 mm/min Working vertical feed - y-axis: 3050 mm/min Turntable area:: 2000x2000 mm Rotary table y/zw axis: : 2800x1000 mm Rotary table max workpiece weight:: 20,000 kg

Category: 101 boring mills and machining centers
Latest update: 29.03.2024 add to watchlist
item-No.: 163521493
New in: 1979

used

Seller: Exapro
Location: Land-cz
Price: 73.500 € add to watchlist

X = 6000 mm Y = 2000 mm Quill = 1250 mm Positioner L = 6000; load capacity 20 tons Year of manufacture/SO/GO: 1979/-/2001

Category: 101 boring mills and machining centers
Latest update: 20.09.2023 add to watchlist
approved
dealer
item-No.: 160336708

used

Location: Land-de

add to watchlist

1 piece used rotary and/drill table Manufacturer: Skoda Type: E25 Year: 1987 Table load max: up to 25t Dimensions 2.000 x 2.000 mm electr. adjustable Mass: 10t

Category: 101 boring mills and machining centers
Latest update: 23.10.2023 add to watchlist
approved
dealer
item-No.: 161509619
New in: 1989

used

check Seller: ZOMA Maschinenhandel
Location: 04838 Eilenburg Land-de

add to watchlist

Manafacture: Skoda Type: E25OB23941 Year: 1989 Part weight: up to 25t Dimensions: 2,000 x 2,000 mm electr. adjustable Weight: 10t

Category: 103 milling machines / Horizontal Floor Type Milling And Boring Machines
Latest update: 17.10.2023 add to watchlist
approved
dealer
item-No.: 161763650
New in: 1963

used

check Seller: ENGINEX KOSICE
Location: Land-sk

add to watchlist

SKODA WD 160 A Floor type boring machine - new in 1963 - refurbished 2011 - HEIDENHAIN measuring system - axis: X-axis 9100 mm Y-axis 2500 mm Z-axis 1200 mm W-axis 800 mm

Category: 101 boring mills and machining centers
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163452365
New in: 1989

used

check Seller: SK Maschinen-Service GmbH
Location: Gera Land-de

add to watchlist

spindle diameter: 200 mm x-travel: 11.000 mm y-travel: 4.000 mm z-travel: 1.600 mm w-Weg: 400 mm dimension of the ram: 520 x 520 mm tool taper: ISO 60 turning speed range: 0,8 - 800 U/min torque: 35.000 Nm bore feed range: 0,75 - 3000 mm/min milling feed range: 0,75 - 6000 mm/min : 3.000 mm/min rapid travel: 6.000 mm/min electrics - voltage/frequency: 380 / 50 V/Hz total power requirement: 180 kW weight of the machine ca.: 181 t dimensions of the machine ca.: ca. 16 x 6 x 9,3 m rotary table: SKODA E 25 SKODA boring table E 25 clamping area 2.000 x 2.000 mm long. movement V-axis 1.200 mm DRO Heidenhain Positip floor plates consisting of 6 platesa 5500 x 1850 x 350 mm (61,05 m²) 2 angular milling heads The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 110 accessories for machine tools
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 163452372
New in: 1990

used

check Seller: SK Maschinen-Service GmbH
Location: Gera Land-de

add to watchlist

clamping width: 2000 mm clamping length: 2000 mm workpiece weight: 25000 kg bed length: 3000 mm table height: 890 mm table width: 2766 mm x-travel: 1200 mm electrics - voltage/frequency: 380/50 V/Hz dimensions of the machine ca.: 3x2x1 m weight of the machine ca.: 9 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 101 boring mills and machining centers
Latest update: 29.03.2024 add to watchlist
item-No.: 163469258
New in: 2013

used

Seller: Exapro
Location: Land-ua
Price: 272.000 € add to watchlist

Rotary table size: 2000x2000 mm Max. load on table: 20 tons Spindle diameter: 160 mm Inner cone of spindle: 100 metrical Max. spindle torque: 250000 kgcm Bed height: 550 mm Width of bed guides: 2000 mm Max. drilling depth with boring spindle: 1600 mm Max. move-out of quill: 1250 mm Normal travel of spindle headstock on the column: 2500 mm X-axis: 3000 mm Min. height of spindle axis over bed surface: 1400 mm Range of steplessly adjustable spindle speeds: 2-800 rpm Range of steplessly adjustable drilling feeds (spindle and quill): 0,5-1600 mm/min Range of steplessly adjustable milling feeds (spindle headstock and column): 1-3200 mm/min Speed of rapid travel at drilling (spindle, quill): 1600 mm/min Speed of rapid travel at milling (spindle headstock in vertical direction, column): 3200 mm/min Power of adjustable electric motor of direct current of spindle drive: 6-55 kW R ...

Category: 101 boring mills and machining centers
Latest update: 29.03.2024 add to watchlist
item-No.: 163469259
New in: 1987

used

Seller: Exapro
Location: Land-ua
Price: 212.000 € add to watchlist

Main technical characteristics: Processing control digital indication; Spindle diameter mm, 200; Cone mm, 60; Quill size mm, 520*5200; Maximum spindle torque: Cutter diameter 160mm. – 8600 Kn. Maximum depth of boring by spindle in mm., 2000; The maximum extension depth of the quill in mm., 1600; Movement of the headstock on the rack in mm., 3000/4000; Moving the rack along the frame in mm., 4000/20000; Dimensions and weight: -Height of a bed in mm., 500; Width of bed guides in mm., 2000; Width of rack guides in mm., 1700; Total machine power 180kVA Power of the main drive in kW, 77. The machine is equipped with a rotary table weighing 49000 kg. Machine weight 102000 kg. We are ready to discuss the price and all terms, please contact us for further discussion.

Category: 101 boring mills and machining centers
Latest update: 29.03.2024 add to watchlist
item-No.: 163521508
New in: 1983

used

Seller: Exapro
Location: Land-cz
Price: 74.500 € add to watchlist

Working spindle diameter 200 mm Spindle taper M 120 Maximum spindle drilling depth 2,000 mm Maximum quill extension 1,600 mm Spindle revolutions in the range 0.8 – 630 min-1 Feeds in the range: drilling and milling 0.63 – 2,500 mm/min 0.63 – 4,000 mm/min Spindle electric motor power 77 kW Threads: metric Whitworth 0.5 – 12 mm 1 – 28 turns/1“ SPINDLE VERTICAL TRAVEL ON STAND 3,150 mm STAND TRAVEL ON BED 6,000 mm DIMENSION BASE PLATES 12,800 x 5,665 mm DELIVERY TERMS The machine is currently in operation. Delivery date as agreed.

Category: 101 boring mills and machining centers
Latest update: 29.03.2024 add to watchlist
item-No.: 163651815
New in: 2009

used

Seller: Exapro
Location: Land-de
Price: 859.000 € add to watchlist

Drilling and milling machine Skoda HCW2 Machine type: HCW 2-180 5/16m Year of construction: 2009 Manufacturer: Skoda Plzen, CZ Control: CNC840D-Powerline Country of manufacture: Czech Republic Freight basis: from storage location + VAT incl. Dismatling and loading Technical data Control Siemens 840 D Powerline Travel distances X-axis 15,000 mm cross-column Y-axis 5,000 mm headstock vertical Z-axis 1,300 mm support beam (RAM) - horizontal W-axis 1,000 mm quill stroke horizontal Machine table rotary table plate field: Length 3,500mm 3,780mm Width 3,000mm 8,000mm max. table load: 60 t Travel 2500mm (V-axis) Drilling/milling spindle Tool taper: ISO 50 Quill Ø 180 mm RAM cross section 450 x 450 mm Power 100KW max torque 11,000 Nm (up to 85 rpm) max. speed 2500 rpm Rapid traverses: X; Y axis: 15 m/min W; Z - axis: 10 m/min Attachment ...

Category: 101 boring mills and machining centers
Latest update: 28.03.2024 add to watchlist
approved
dealer
item-No.: 163675453
New in: 1997

used

check Seller: S+B Maschinenhandelsgesellschaft mbH
Location: Tschechien

add to watchlist

spindle diameter:180 mm x-travel:6.000 mm y-travel:2.900 mm total power requirement:95 kW weight of the machine ca.:130 mit Zubehör t z-travel:1.250 Ram mm w-axis:1000 Spindel mm ram stroke:1250 mm dimension of the ram:450 x 450 mm bore spindle stroke:1000 mm bore spindle turning speed range:1600 U/min powered rotary table: IOS 40 CNC 2 Achsen B u.V Rotary-table:3000 x 3500 mm Rotary-table: CNC-IOS 40 NC mm stepless adjustable, relative to diameter:Index 4x 90° -360000 Winkel =0,001 Grad mm travel - cross:Längs 1230 mm table load of rotary table max.:40 Tonnen clamping plate:3 x 8000 x 2000 mm CNC Ram-Type Floor Boring and Milling machine, dismantled and stored

Category: 101 boring mills and machining centers
Latest update: 29.03.2024 add to watchlist
item-No.: 163675858
New in: 1983

used

Seller: Exapro
Location: Land-cz
Price: 1.177.000 € add to watchlist

Working spindle diameter 200 mm Spindle taper M 120 Maximum spindle drilling depth 2,000 mm Largest quill extension 1,600 mm Spindle speed in the range 0.8 - 630 min-1 Displacements in the range: drilling 0.63 - 2,500 mm / min milling 0.63 - 4,000 mm / min Power consumption of the spindle electric motor 77 kW Threads: metric 0.5 - 12 mm Whitworth 1 - 28 threads / 1 VERTICAL HEADREST TRAVEL ON STAND 3 150 mm TRAVEL OF THE STAND ON THE BED 6,000 mm BASE PLATE DIMENSIONS 12,800 x 5,665 mm

Category: 101 boring mills and machining centers
Latest update: 29.03.2024 add to watchlist
item-No.: 163675859
New in: 1987

used

Seller: Exapro
Location: Land-cz
Price: 1.412.000 € add to watchlist

Work spindle diameter 200 mm Spindle taper M 120 Maximum spindle drilling depth 2,000 mm Largest spring extension 1,600 mm Spindle speed in the range of 0.8 - 630 min-1 Displacements in the range: drilling 0.63 - 2,500 mm / min Milling 0.63 - 4,000 mm / min Power consumption of the spindle electric motor 77 kW Thread: metric 0.5 - 12 mm Whitworth 1 - 28 threads / 1 VERTICAL HEADREST TRAVEL TO STAND 4,000 mm TRAVEL OF THE STAND ON THE BED 5,000 mm BASE PLATE DIMENSIONS 6,400 x 5,100 mm

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
SKODA 3rd category level
 
RESALE used machinery 25 years online