used SKET Roll crushers

Max. width: 3200 mm Nominal width: 3050 mm Max. thickness width: 40 mm Min. thickness width: 12 mm Max. material speed: 12 m/min Work rolls: -Units: 7 -Diameter: 340 mm Backup rolls: -Units: 5 -Diameter: 340 mm Supporting rolls: -Units: 15 -Diameter: 334 mm Diameter of feed and eccentric rolls: 380 mm Electrical motor: 132 kW Floor space: -Length: 3657 mm -Width: 5486 mm -Height: 3048 Total weight:105 tons

STRIP WIDTH: 750 MM, ENTRY THICKNESS: 0.5 MM, EXIT: 2 x 0.007 MM,

1 factory-tested, very well preserved double girder crane with 4 wheels per side to minimise wheel loads Load approx. 100,000/32,000 kg Wingspan approx. 26,700 mm Hook way approx. 14,000 mm Make SKET-year of manufacture/overhaul/workshop test 1981/2000/2016 Very low equipped with high-quality two-rail wind work trolley with main hub usage as a mounted crane 100 t and auxiliary hoist 32 t, cabins - and radio control, ideal wheel load distribution by 4 wheels per side working speeds: Hoist main hoist 100 t up to 0.25/2.5 m / min auxiliary hoist 32 t up to approx. 7.0 m / min Trolley gear approx. 7.0/20,0 m / min Crane chassis approx. 11.0/32.0 m / min

Size: 1.600 x 5.500 mm - Decks: 2 - Included Electrical motor and springs - Will be overhauled, sandblasted and painted

inlet wire diameter 6,5 mm finished wire diamter 1,6 mm number of drafts 8 diameter of capstan 550 mm and 650 mm speed -meters/sek 8-12

material width: 2500 mm material thickness: 25,00 mm no. of straightening rolls: 7 sheet thickness - min.: 8,00 mm total power requirement: kW weight of the machine ca.: 61 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

There is a complete oil/rap mill, suitable for cleaning, conditioning and pressing available, the plant was operated until 2009 on 320 days a year, thereafter until 2016 only temporarily, includes (1) 22x elevators/TKF/KBW Ilchmann, Ergewa, CIMBRIA Hernig, type: A250-350, SU 200-400, TKF, KBW (2) 3x Discharge Screw Ergewa A350x1760 to 4880 (3) Screening Machine CIMBRIA 117, dimensions screening area: 18m² (4) Weighfeeder Herweg HDW 65/2,0-O, output: 12.5t/h (5) Drum Magnetic Separator Allgeier Ø400x800, speed: 35/min (6) Flaking Roller Mill CIMBRIA FW 812 (7) 3x Heat Pan CIMBRIA W255/7-1 (7) 3x Screw Presses CIMBRIA EP 26.1-W 255/7-1 (8) Trub separator CIMBRIA TAS 5 (9) Plate heat exchanger Thermowave TL 150 KBCL (10) 2x Plate filter Lochem Filter MVDCD 1225/1250/30/15 (10) Reed cooler Wessel GmbH GSK 250, with documentation, an on-site inspection is possible.O, output: 12.5t/h (5) Dru ...

TECHNICAL SPECIFICATIONS Manufacturer: SBM Basic Construction / SANDVIK Crusher Designation: Crawler mobile pre-crushing system Version: With SANDVIK double roller crusher Year of construction: 2016 Throughput: 1,000 t/h Total weight: 230,000 kg Operating mode: Hand/Automatic Mains voltage: 3*400 V (AC), main switch 1000A Controller: - Control cabinet with enclosure - Incl. control with visualization - Incl. error display with operator panel ****************************** COMPOSED OF 1) Feed bunker Dimensions (LxW): approx. 4.5 x 6.0 m Content: approx. 30 cbm 2) Record tape Type: PA 18 x 9.5 m Version: with crawler chain Plate width: 1,800 mm Plate tape length: 9.5 m Drive power: 90.0 kW (2 x 45.0 kW) 3) SANDVIK Double Roller Crusher Type: Hybrid CR810/12-20 Roll diameter: 1,200 mm Roll length: 2,000 mm Drive power: 2 x 200 kW (direct drive) Throughput:  ...

TECHNICAL SPECIFICATIONS Manufacturer: FAM Designation: Walzenmühle Type: 1004 H Year of construction: 1996 Machine size: 1004 Roller diameter: 1,000 mm Roller width: 400 mm Roller speed: n = 122 1/min Roller circumferential speed: v = 6.4 m/s Machine V-belt pulley: ∅ 800 mm Transmission V-belt pulley: ∅ 400 mm Drive power: 2 x 22 kW, 233 1/min, 400/690V Drive type: SEW gear motor R 102 DV 180 L4 TF Total weight: 8.9 t Materials Roller jacket: G-X 110 MnCr 18.2 Wear plates: Hardox 400; 20 mm Material guidance: Hardox 400; 15 mm SPECIFIC COMMENT - Including hydraulic unit and control - Previous service life approx. 5 years ************************************

used MoCo shredder main machine with gearbox and motor 7,5 kw

Breshard 3 Reel shredder. Compline on ramen with gearbox and electric motor

New engine Scania DC13-072A with Starter without altenator available for genset operation in chrusher immediately at stock Zeven/Germany Phone:0049 4281 950583 fax :0049 4281 950585 infoatmiw-zeven.de abc.miw-zeven

Type: Rollercone, feed size up to 175 mm, E-drive with 2 x 132 kW, semi-mobile steel construction, with inlet and outlet hopper

Sumab 750, 30-120 t/h. (Sweden). Mobile crusher on a caterpillar chassis with a magnetic block for sorting metal. Jaw Crusher - 700x500mm Entry with Single Jaw (28" x 20") Grooved cheeks 6 tons (2700 pounds) Hydraulic wedges with spring rod lock and reverse Drive function Electric motor 45 kW (60 HP) V-belt and drive pulley Hopper - 3-sided reinforced construction, Hardox lining Conveyor - Double electric drive 1.5 kW (2pcs. 2HP) Magnet - electric drive 1.5 kW (2 HP) Controls: Electric control panel with push buttons with contactors and relays Remote Wireless remote control to stop/start the feeder Controls - Electric control panel with push buttons with contactors and relays Plant capacity - fraction size / tons per hour 40 mm - 30-40 t/h 50 mm - 45-50 t/h 60 mm - 45-65 t/h 70 mm - 55-75 t/h 80 mm - 70-90 t/h 90 mm - 80-100 t/h 100 mm - 90-120 t/h

Glass recycling plant, recyling plant used Consisting of the following machines: Task bunker for wheel loaders with 2 shaft shredders Dispenser Vibrorinne Becherwerk Crossband with band magnet Vibrorinne Gate valve Hammer mill MUD 89 45 kW Screw conveyor Becherwerk Windssichter 2 filters 2 silos Becherwerk 2 pre-containers 2 dosing sera 2 rotor ball mills RM150 each 75 kW 2 filters Projected capacity: approx. 4700 kg/h used glass, bottles, vases, etc. End product: Glass powder in grain size 0 -5 mm as well as discarded iron waste, plastic waste and paper waste The plant can also be sold in parts. Originally, foam glass choter was produced in the complete plant. We also have the remaining components such as EIRICH mixer 8 belt furnaces max 1100° C as well as other silos, filters and suctions, conveyor screws, cup plants...

Shredder, industrial shredder, 2 wave star breakers, glass shredder, rotor scissors, star mill, garbage shredder, two-shaft shredder, two-shaft shredder, shredder with filler for wheel loader used The shredder can also be used as a single position. Manufacturer: SANT'ANDREA NOVARA Type: G30/1570 Built in 2003 Speed of the fast wave: 17.7 rpm Speed of the slow wave 9.3 rpm Turning monent. 11875 Nm Engine VEM 22 kW 400/690 V Dimensions Shredder: approx. 2500 x 1000 x height approx. 400 mm with motor 1500 mm Dimensions of cutting unit approx. 1600 x 810 mm Throw-in height approx. 4.6 m Throw-in funnel approx. 3 x 2 m the drop-in funnel is closed by a percular upward opening slider approx. 2.5 x 1.5 m. Total dimensions of the steel construction: approx. 3 x 2 x 8 m In the shredder, used glass was broken for a foam glass bulking system. Basically, other brittle material ...

Inlet: approx. 380 x 370 mm Functionality with 2 swingarms and 2 movable crushing jaws

High-performance fine cone crusher Calibrator 1600/300 H III

TECHNICAL SPECIFICATIONS Manufacturer: Weserhütte Description: Double Knee Lever Jaw Crusher Type: DBS1200x960 Year of construction: 1979 Version: Heavy version for hard rock Drive power: 110 kW Flywheel diameter: approx. 2,400 mm Inlet opening (width x height): 1,200 x 960 mm SPECIFIC COMMENT - Incl. pusher SW1250x4000 - Incl. stepped grate with pre-screening - Incl. control unit **************************** TECHNICAL SPECIFICATIONS Manufacturer: Weserhütte Description: Double toggle jaw crusher Type: DBS1200x960 Year of manufacture: 1979 Version: Heavy duty for hard rock Driving power: 110 kW Flywheel diameter: approx. 2,400 mm Inlet opening (width x height): 1,200 x 960 mm SPECIFIC COMMENT - Incl. step grate with pre-screening - Incl. control unit If you are interested please let us know, we appreciate to send you a detailed quotation. EuroCon ...

Baking Crusher Kleemann Type SSTR Mouth width 400 x 280 mm With new 15 kW motor Incl. new underframe, new pulley and V-belt

Baking Crusher Nordberg-Dragon-Babbitless Mouth width 900 x 650 mm Incl. Motor 75 kW Weight ± 20,000 kg

TECHNICAL SPECIFICATIONS Manufacturer: BROWN LENOX Designation: KUE KEN Jaw Crusher Type: 106 Design: Double toggle jaw crusher Year of construction: 1982 Inlet opening (width/depth): 1065 x 305 mm Gap width: 38 - 75 mm Throughput: 65 - 110 t/h Maximum feed size: 240 mm Drive power: 55 kW Crushing speed: 300 - 350 rpm Total weight: 10,200 kg SPECIFIC COMMENT - Solid crusher construction with steel support

TECHNICAL SPECIFICATIONS Manufacturer: GHH Designation: Double toggle jaw crusher Design: Heavy duty version Type: 86 Year of construction: 1968 Throughput: 45 - 55 cbm/h at crushing gap 80 - 100 mm Inlet opening: 800 x 630 mm Maximum feed size: approx. 450 mm Drive power: 112 kW Weight: 27.000 kg SPECIFIC COMMENT Complete semi-mobile system consisting of: - GHH double toggle jaw crusher - Feed funnel - Plate tape 1,000 x 5,000 mm - Plaster tape (under the plate tape) 800 x 8,000 mm - Solid steel construction ---------------------------------------------------------- TECHNICAL SPECIFICATIONS Manufacturer: GHH Description: Double toggle jaw crusher Version: Heavy duty version Type: 86 Year of construction: 1968 Throughput capacity: 45 - 55 cbm/h with crushing gap 80 - 100 mm Feed opening: 800 x 630 mm Maximum feed size: approx. approx. 450 mm Drive power ...

Infeed: approx. 1,300 x 800 mm (50"x26"), feed hopper 7 m³ with vibrating transducer, active pre-screen, CAT C9 with 350 hp, side and main discharge belt, magnetic belt, 4-axis transport dolly, total weight: approx. 58 t.

Inlet: 600 x 400 mm, feed hopper, plate conveyor feeder, 2deck pre-screen with inspection belt, main discharge conveyor, wheeled on 1-axle chassis, weight: approx. 25 t