british flag
Resale Logo

SKET used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information used and reconditioned Diesel and Gas Generators  ALL POWER SOLUTION  http://www.allpowersolution.com 
banner logo
start page > keywords SKET > results
307 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
125465306 2419

SPEZIALKRAFTWAGEN N1) VW Hochraum-Kasten Allrad for sale


last off Code: BH-70539 Matriculation year: 26.09.1989 elapsed. Mileage: 82.060 km Output: 51 kW Displacement: 1,588 cc Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a,  ...

 
last off Code: BH-70539
Matriculation year: 26.09.1989
elapsed. Mileage: 82.060 km
Output: 51 kW
Displacement: 1,588 cc
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
Type, variant, version: 251/4WD bra
FIN: WV2ZZZ25ZLG114504
Equity / total weight: 2,060/2,600 kg
Color: Green
Construction: closed
Number of seats: 3
Equipment: material equipment, cassette player, 4-speed manual transmission, all-wheel drive
Documentation: types of licence available
Key: 1
Comments on the condition: engine oil loss, exhaust manifold and gasket defective, gearbox leaking, clutch on the wear limit, intermediate gear leaking axle parts div. porous suspension rubbers, rear wheel bearing play, brake rusted, front discs and pads damaged, partially rusted brake line, steering gear easily leak, starter broken, heating and fresh air controller Anrostungen in frame, fenders and shock absorbers, rust spots at windscreen dawned, front left, differences in colour varnish, div. prov. Repainting, sticker residue, is pointed out explicitly that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2320-0-300-0132 and 2320-0-550-0083
 
Price  
    request
125456703 702

Kunststoff Behälter/Körbe for sale
plastic baskets, stackable dimensions: outside 60


 
Price  
    request
125437017 109

CHARMILLES Roboform 400 for sale
EDM Machines


Current generator status - may 2018: 51.688 h Well maintained and preserved, said there's always under power. Total weight of 3,750 kg Erowa - Quill with 5-fold changer High-performance generator: 128A for great remo ...
used machine
 
Current generator status - may 2018: 51.688 h
Well maintained and preserved, said there's always under power.
Total weight of 3,750 kg
Erowa - Quill with 5-fold changer
High-performance generator: 128A for great removal volume
Table: 800x560mm
Workpieces up to: 1. 100x780mm
Traverse paths: x = 450 mm, 320 mm = y, Z = 410 mm
Complete documentation and software diskettes for prolonged power outage there.
New price of the machine of 1991 was approx. 180,000 EUR.
The range magnet apparent in the photo and the lamp are not included, as the dielectric filling.
1991
Price  
    request
125456817 702

Kunststoff Behälter / Körbe, stapelbar for sale
plastic baskets, stackable dimensions: outside 60


 
Price  
    request
125436736 702

KEMPER Brotanlage for sale
Bread making plants


Plant is 7 rows A total 196 proofing baskets in good condition is Verladefertig completely in stock Dimensions: Height: 2.60 cm Depth: 1.50 cm Width: 183 cm without control box 232 cm with box
used machine
 
Plant is 7 rows
A total 196 proofing baskets
in good condition
is Verladefertig completely in stock

Dimensions:

Height: 2.60 cm
Depth: 1.50 cm
Width: 183 cm without control box 232 cm with box
 
Price  
    request
125442719 109

BOUS mit Cebeco Einhausung for sale
steam/vapour degreaser plant


1 used steam/vapour degreaser plantMake: Bouswith housing make Cebeco 2 mm stainless steel for baskets in the size of appr. 400 x 800 x 150 mmfor use of Perchloretylen, filling volume appr. 125 ltr.with safetainer for fi ...
used machine
 
1 used steam/vapour degreaser plant
Make: Bous
with housing make Cebeco 2 mm stainless steel

for baskets in the size of appr. 400 x 800 x 150 mm
for use of Perchloretylen, filling volume appr. 125 ltr.
with safetainer for filling and defilling
with air purge and rolling lid

further accessories:
- Abus electric hoist GM3, 125 kg, for handling the baskets
- documentation for plant and hoist
1996
Price  
  DE   request
125374611 702

NEU FGT 24-Z for sale
Fat-frying plants


Table-FAT back pack 24 Berlin Model: FGT 24-Z -with 1 basket -Turning device -3.6 KW / 230 V / 50 Hz -NEW DEVICE

 
Table-FAT back pack

24 Berlin

Model: FGT 24-Z

-with 1 basket

-Turning device

-3.6 KW / 230 V / 50 Hz

-NEW DEVICE
 
Price  
    request
125401377 1900

Lot of Metal Baskets


Weight approx.: 400 kgDimensions (l x w x h) approx.: 2500 x 1000 x 4500 mmDescription: Lot composed of 15 metal baskets. Size 1000 x 800 x 150 mm each SHIPPING DIMENSIONS 2400 X 2000 X 2200 mm 5 PARCELS (STACKS COMPOSED ...

 
Weight approx.: 400 kg
Dimensions (l x w x h) approx.: 2500 x 1000 x 4500 mm
Description: Lot composed of 15 metal baskets. Size 1000 x 800 x 150 mm each
SHIPPING DIMENSIONS 2400 X 2000 X 2200 mm 5 PARCELS (STACKS COMPOSED OF 3 STACKABLE BASKETS)
 
used machinery auction RESALE 150 €  
  IT   request
125355116 1403

GITTERKÖRBE LAGERKÖRBE Verzinkt WIE NEU for sale


Storage baskets stacked vintage cameras Data: -H: 30 cm -B: approx. 62 cm -T: 60 cm -Used -Grid: 25 mm -zinc plated -Price per piece -MULTIPLE AVAILABLE Price: â?¬15,00 net â?¬17,85  ...

 
Storage baskets stacked vintage cameras

Data:
-H: 30 cm
-B: approx. 62 cm
-T: 60 cm

-Used
-Grid: 25 mm
-zinc plated
-Price per piece
-MULTIPLE AVAILABLE

Price:
â?¬15,00 net
â?¬17,85 gross
You will receive an invoice with expelled VAT

Our recommendation:
Tell us your requirements...
We assist them with the realisation of your projects, from planning to the order to the Assembly.

Delivery upon request by us conveniently possible.
 
15 €  
    request
125401646 103

YALE GLP 16 VX for sale
LPG Forklift


Weight approx.: 2500 kgrunning hours: 18992 hloading capacity: 1,6 tlifting bridge: 4800 overall height: 1190 mDimensions (l x w x h) approx.: 2000 x 1400 x 2400 mmDescription: YALE GLP 16 VX LPG Forklift - serial no.: C ...
used machine
 
Weight approx.: 2500 kg
running hours: 18992 h
loading capacity: 1,6 t
lifting bridge: 4800
overall height: 1190 m
Dimensions (l x w x h) approx.: 2000 x 1400 x 2400 mm
Description: YALE GLP 16 VX LPG Forklift
- serial no.: C810B05379H
- Triplex
- free lift: 1510 mm
- super elastic tyres
- 4 control circuits
- side shift
- slight leakness
- valve cover gasket
- for further information see photos
2010
used machinery auction RESALE 4,200 €  
  DE   request
125242333 1018

SKY HIGH ST 120 for sale
self-propelled mobile lifting working platform


self-propelled mobile lifting platform with a radius of 12 m SKY HIGH ST120 359° rotated with battery (2 batteries 12 V each) 2 control panels (in the basket and below) TÃ?V 09/2018 Documentation and T&Atild ...

 
self-propelled mobile lifting platform with a radius of 12 m SKY HIGH ST120
359° rotated
with battery (2 batteries 12 V each)
2 control panels (in the basket and below)
TÃ?V 09/2018
Documentation and TÃ?V reports fully
Max working height 12 m
maximum page display 6 m
215 kg max load
maximum slope footprint 4.5 °
maximum speed 6 km/h
Transport dimensions: Length / width / height: 4650/1500/1900 mm
Weight 2960 kg
Photo work diagram
small video on demand

 
8,500 €  
    request
125374405 1020

HERKULES for sale
Hydraulic Telescopic Lift Platform Herkules on Tra


Hydraulic telescopic boom lift on towable trailer of 1.490 kg With registration certificate Sold to make room, in working order, without warranty. Works on two batteries, a charger is part of the machine, the bat ...
used machine
 


Hydraulic telescopic boom lift on towable trailer of 1.490 kg

With registration certificate

Sold to make room, in working order, without warranty.





Works on two batteries, a charger is part of the machine, the batteries can be charged while working with the machine.

The signal lights are in order, the window of the fog light is to be replaced.



Manufacturers working height: floor nacelle 14 Meters = working height 16 Meters

Working height measured by me: floor nacelle 13 Meters = working height 15 Meters

Offset measured by myself +/- 9 meters from the axis of rotation with 1 man in the basket



The trailer-mounted boom lift is registered and can be towed on public roads



Documents provided: Registration certificate


1989
used machinery auction RESALE 1,850 €  
  BE   request
125211190 1403

VARIOUS for sale
Forklift and shelves for warehouse


Racks & Forklifts for Warehouse For sale exclusively at 10:30 the next 11 at our offices in Bergamo The merchandise is kept Cusago (Mi) To view the lot please contact us on 0307751645 and make an appointment Detailed ...
used machine
 
Racks & Forklifts for Warehouse
For sale exclusively at 10:30 the next 11 at our offices in Bergamo
The merchandise is kept Cusago (Mi)
To view the lot please contact us on 0307751645 and make an appointment
Detailed catalogue available
Racks & equipment
-metal baskets stacking storage, about 160
-various types
-power tools (drills, screwdrivers, jigsaw, manual strapping tool)
-storage boxes (various sizes), nr. 16
-various material for packaging etc.
Forklifts and pallet trucks
-forklifts Pimespo mod. 5253, 1,000 kg Capacity 10 TX idea, year: 1999
-forklifts OM mod. E-25 N, payload: 2,500 kg
-walk-behind Sweeper Maspel
-hand pallet truck, nr. 7
-Manual lifters, nr. 3
Various
Furniture and office equipment (# 7 workstations desk complete with seat), as well as accessory equipment of various kinds (# 2 sat navs, digital cameras # 2)

1999
13,330 €  
  IT   request
125373001 1108

Various parts


Lights, bulbs, headlights, shock absorbers, gaskets, cylinder head gaskets for Nissan, Chrysler Location: 1st floor of the mezzanine to the left of the stairs Shelves not included

 


Lights, bulbs, headlights, shock absorbers, gaskets, cylinder head gaskets for Nissan, Chrysler

Location: 1st floor of the mezzanine to the left of the stairs

Shelves not included


 
used machinery auction RESALE 30 €  
  BE   request
125151735 503

DOPPSTADT AK 430 Profi for sale
Shredders


Mercedes Benz diesel engine: 430 HP Fine shredding basket Rear discharge conveyor Hydr. Drive (for moving on site) Radio remote control
used machine
 
Mercedes Benz diesel engine: 430 HP
Fine shredding basket
Rear discharge conveyor
Hydr. Drive (for moving on site)
Radio remote control
2003
Price  
    request
125372558 1020

Reels of strings


Reels of strings Quantity: +/-50 The 3 wire baskets are included

 


Reels of strings

Quantity: +/-50

The 3 wire baskets are included


 
used machinery auction RESALE 15 €  
  BE   request
125075673 707

ARISTARCO N 40 for sale
Glass washers


Glass dishwasher N 40 Shelf height 290 mm wash 120 sec. 230 V / 2.7 kw B / T / H 456 x 495 x 700 mm Klarspüldosiergerät, Cleaner dispenser drain pump 1 basket of 400 x 400 mm open Very good condition, verified.  ...

 
Glass dishwasher N 40
Shelf height 290 mm wash 120 sec.
230 V / 2.7 kw
B / T / H 456 x 495 x 700 mm
Klarspüldosiergerät, Cleaner dispenser drain pump
1 basket of 400 x 400 mm open
Very good condition, verified.
Without warranty. Pick up.
 
490 €  
    request
125366090 109

VIXEN FL 300 for sale
Parts Cleaning System


Weight approx.: 10000 kgDimensions (l x w x h) approx.: 6600 x 3600 x 2600 mmDescription: 3 tanks, tank contents 1600, 400 and 680 l, with 2 washing baskets and 2 transport trolleys, washing box diameter approx. 3000 mm, ...

 
Weight approx.: 10000 kg
Dimensions (l x w x h) approx.: 6600 x 3600 x 2600 mm
Description: 3 tanks, tank contents 1600, 400 and 680 l, with 2 washing baskets and 2 transport trolleys, washing box diameter approx. 3000 mm, above the washing opening approx. 1260 mm, see photos for details
 
Price  
  GB   request
124946038 1402

SKET for sale
Magnetic separator


Built in 1975, about 2 tons. Robust and resilient. Magnetic 110 V 2,2 kW Thermal class H 40-54 1960
used machine
 
Built in 1975, about 2 tons. Robust and resilient.
Magnetic 110 V
2,2 kW
Thermal class H 40-54 1960
1975
Price  
    request
125203581 702

COMAS for sale
Cup-cake Production Line


COMPLETE LINE FROM DOUGH PREPARATION TO PACKAGING for HARD BISCUITS WITH CREAM FILLING and for CUP-CAKES & MINI CAKES WITH OR WITHOUT FILLING Capacity: 7.000pcs by 70gr. Year 2007-2008 The Line was 2008 installed, but wa ...
used machine
 
COMPLETE LINE FROM DOUGH PREPARATION TO PACKAGING for HARD BISCUITS WITH CREAM FILLING and for CUP-CAKES & MINI CAKES WITH OR WITHOUT FILLING
Capacity: 7.000pcs by 70gr.
Year 2007-2008
The Line was 2008 installed, but was only 6 months in production.
Excellent condition! Line is still installed, please see photos below.

Line consist of:

Werner & Pfleiderer Tunnel oven Cyclothermic 1.2m x 30m, year 2000, 2 zones - 1pcs.
COMAS Line for the production of cakes with filling - 1pcs
SAN CASSIANO Dough mixing Machine / spiral mixing - 2pcs
Equipment for ingredients dispensing -1pcs
TECNO PACK Horizontal packing machine Evolutiohn - 1pcs

-Automatic position of forms on a baking sheet.
-Automatic feeding of dough and ingredients.
-Dispenser dough in aluminum or cardboard shapes,
-press to shape,
-depositor for filling,
-rotary machine for forming of top
-cooling in storage carts

The line is completed with 248 trays: for each cycle 80 trays. The diameter on top of the aluminum form is 60 mm, the diameter on the bottom is 45 mm.
The trays are installed on the assembly conveyer and are taken from the bottom of the oven by hand.

The rest of the technological process is working by automatic regime. The placing of the aluminium molds is working automatically. The molds are not lubricated. It is possible to use paper paddings only if they are fitting the aluminium molds.

There are 3 different kinds of cupcake which can be produced with those molds:
For the cupcake you have to fill in biscuit dough so you have to change the mixer.
For the other 2 kinds (photos L.&T.) you have to fill in shortcrust pastry dough so you can use the same aluminium molds.

Dosing of dough for baskets done by squeezing the dough in moulds by piston. Dosing is adjusted by piston stroke. Formation of baskets (bottoms) is done by stamping the dough is in the form. Dosing of filling is carried out by the suction and its subsequent squeezing by piston. Dosing is adjusted by piston stroke. The filling can be homogeneous and with the addition of pieces. The cake cover is formed by rotary method.

The line was also producing cakes similar to muffins with following characteristics:
- the dough was deposited by dispenser for filling (weight 36gr) and it took 50% of the volume of the dispenser cylinder. Hence, the weight can be increased twice.
30% dough humidity
Baking time: 18 minutes.
Weight of the finished product: 30g.
For usage of paper moulds, it must be positioned manually (by hand) in a metal mould, because they can not be fixed on baking sheet.; Good condition
2008
550,000 €  
    request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More SKET models (2 or more machines):
SKET UDZA1250/6 (2)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

Cleaning System METALAS MCF 1250


Loading surface: 900x900mm, useful height: 800mm, max. grid load: 1t, pump jet pressure: 4.5bar, pump output: 25m³/h, metal sheet thickness: 2.5mm, length: 1415mm, width: 1840mm, height: 1940mm, weight: 650kg, including several loading baskets.

Merlo TF 38.10TT-120


Brand: Blackbird model: TF 38.10 TT-120 year: 2016 Hours: 380 plate: AJNO12 engine: Deutz engine displacement: 3600 HP: 120 height: 9.6 mt max.: 3800 kg ACCESSORIES -Lifting fork; -Concrete mixing bucket; -Lifting person basket mod. PFSC20, year 2016  ...

Vertical Drawing Machine SKET UDZSA 2501


Drum diameter: 600mm, wire diameter: 1-8mm, number of available drawing machines: 2.

Extruding lines DOLCI screws 2x55 30 L/D


DOLCI EXTRUSION LINE screws 2x55 30 L/D (DOLCI)+ 1x75 30 L/D(BANDERA) oscillating die 350 mm.diam, gap 0,9 mm. IBC adjustable calibrating basket driven gusseting units and panels still pull off unit 2000 mm. wide single collection frame 1600 mm.  ...

AMUT VERTICAL CENTRIFUGE AMUT mm.400 rotor diameter


AMUT VERTICAL CENTRIFUGE mm.400 rotor diameter, length mm.1900 mm., 120 mm.long paddles on the whole length, AISI 304 steel basket diam.mm.650, height : 1.975 mm. mm.3,0 holes, self-cleaning system through water sprays. Rolling type be ...

Semi-Automatic Basket Centrifuge RÖSLER Z 800 HA-TURBO-Floc®


Max. output: 1200l/h, max. capacity: 40kg, power: 5kW, max. rotational speed: 2850/min, drum diameter: 382mm, length: 1400mm, width: 1500mm, height: 2000mm, weight: 350kg, number of available centrifuges: 2, membrane pump of both machines defective.

Wanzl EL-212


Used Shopping Trolleys Wanzl EL-212. condition: used kind of trolley: trolley without platform basket size: big (from 151l) manufacturer: Wanzl model: EL212 basket volume: 212l load capacity: 212 kg child seat: with child seat neutral  ...

Trolleys for supermarkets Wanzl ELX-248 B


Wanzl ELX-248B ( 2012-2017 ). Perfect condition ! The best price on the market ! condition: used kind of trolley: trolley without platform basket size: big (from 151l) manufacturer: Wanzl model: ELX 248 B basket volume: 248 Liter load cap ...

AUTOCLAVES GRANDIS VAPORIZER TYPE A


CAPACITÀ N. 05 STEEL BASKET 110X52 H 80 BOILER STEAM BRAND BONO TYPE VM50NT 500 KG /H YEAR 2003 RUNNING CONDICITON

Machineries and building equipment Shelvings and other tools Various


For sale exclusively on next 18-01-2018 hours 15:00 in Ardesio (BG) for more information and detailed catalogue please contact us at 0307751645 equipment and machinery:-column (Sermac)-White-Band saw concrete buckets (Butti, nr. 5 unit à)-baskets for fork ...

Vent Assembly Centre SCHÜCO FMC


For aluminium vent frames for measuring and cutting to length of glazing beads and locking bars and the assembly of fittings, glazing beads and gaskets. Measuring and assembly table RUCHSER RU-BM-2500-AL.

Waste presses Bartontech


Bartontech® Perforator for PET bottles Stationary machine with charging basket ~new machine~ Technical specification: - Engine – 2 x 1,5kW - 2 perforation rollers - Rollers circulation: 36 times / per minute - Inlet size: 1 x 1 m - Productivity:  ...

Coextrusion plants DOLCI-BANDERA 3 layers 1600 mm.wide tube


SWEET BANDERA EXTRUSION LINE screws 2 × 55 30 L/D (desserts) + 1 × 75 30 L/D (BANDERA) oscillating die 350 mm. diam, 0.9 mm gap. IBC adjustable calibrating basket driven gusseting units and panels still pull off unit 2000 mm. wide single collection ...

EU LAUNDRY BASKET 30 ltrs


2 pcs molds for Laundry Basket 30 ltrs basket + cover Testing of the mold possible

EU LAUNDRY BASKET 50ltrs


Laundry basket 50 ltrs 2 pcs molds: basket + cover

Renzmann 320 22


washing machine for parts including washing basket with hose connection, kurt car cleaning and ventilation.

Gasketed Plate Heat Exchanger ALFA LAVAL M6 FG


Volume flow: 57.6m³/h, heat exchanger surface: 38m², flange connection: 50mm/ DIN 2501/ PN 16/ ANSI150, length: 140mm, width: 320mm, height: 920mm.

Bottle Washing Machine JS KFH-20


Output: 400-1000bottles/h of all sizes, control: Semi automatic with manual crate insertion, storage container: Double walled, insulated, length: 3000mm, width: 900mm, height: 1200mm, including custom-made plastic baskets.

ILLIG RDM70K Mold ILLIG 95 mm dia Mold


1 x Used ILLIG RDM70K Mold manufactured by ILLIG for 95 mm dia. PS Cups, 12 Cavity. Together with Collector Plate, Guide Rods and Stacking basket for the ILLIG UG70B Stacker/ Counter

WMW SKET UBR 40x3150


Washing machine for knife baskets Storm Messerkorbwaschmaschine


Product number: 992 Type: Messerkorbwaschmaschine Serial number: 2309211 Year of construction: 2011 Heating: electric Power: 3 x 400V, 50Hz, 16.5kW Dimensions: 3170 x 1070 x 1850 mm Including soap dispenser

Blasting Machines Guyson T 50


Blast cleaning machine Guyson T 50, YOM 1980, work envelope 760x360mm, basket capacity 50kg., with pressure system G55 and cyclone separator, price 4500 EUR

Gasket set 02937848 Deutz original Deutz 02937848


Gasket set Deutz 02937848 0293-7848 0293 7848 2937848 original For engine Deutz TCD7.8L6 Price without VAT (for export in all European Countries). Shipping costs are not included.The indicated delivery time is valid if the items are on stock.  ...

Kettle Talsa REA 500


Condition: Overhauled Technical data: • overall dimensions 1720x1070x1040 mm; • internal dimensions 1360x700x540 mm; • capacity 500 litres; • power 27 kW; • power supply 400 V; • oil jacketed; • ADITEC controller; • basket; • weight 448 kg.  ...

Autoclaves vip industrial, s.a. ae-7800


AUTOCLAVE HORIZONTAL VIP with 4 baskets Autoclave horizontal cylindrical and fixed, is earmarked for the sterilization of food products, the appliance is built completely in stainless steel AISI-304 Brand: vip industrial, s.a. Type: ae-7800 Year of manuf ...

Gasket set for MWM/CAT DEUTZ Power Systems DEUTZ Power Systems 12211353


Gasket set for MWM/CAT. Original spare part DEUTZ Power Systems 12211353 (1221-1353, 1221 1353, old numbers 12211575, 1221-1575, 1221 1575, 12211964, 1221-1964, 1221 1964). MWM/CAT engines TCG2032/CG260. 38 pieces on stock. Price without VAT (for ex ...

Gasket for MWM/CAT DEUTZ Power Systems DEUTZ Power Systems 12280941


Gasket for MWM/CAT. Original spare part DEUTZ Power Systems 12280941 (1228-0941, 1228 0941, old number 12280780, 1228-0780, 1228 0780). MWM/CAT engines TCG2032/CG260. 8 pieces on stock. Price without VAT (for export in all European Countries). Shipp ...

Cylind.head gasket for MWM/CAT DEUTZ Power Systems DEUTZ Power Systems 12452033


Cylind.head gasket for MWM/CAT. Original spare part DEUTZ Power Systems 12452033 (1245-2033, 1245 2033, old numbers 12452168, 1245-2168, 1245 2168, 12452011, 1245-2011, 1245 2011). MWM/CAT engines TCG2020/CG170. 20 pieces on stock. Price without VAT ...

Cylind.head gasket for MWM/CAT DEUTZ Power Systems DEUTZ Power Systems 12280130


Cylind.head gasket for MWM/CAT. Original spare part DEUTZ Power Systems 12280130 (1228-0130, 1228 0130). MWM/CAT engines TCG2032/CG260. 12 pieces on stock. Price without VAT (for export in all European Countries). Shipping costs are not included.The ...

Flange gasket for MWM/CAT DEUTZ Power Systems DEUTZ Power Systems 01167556


Flange gasket for MWM/CAT. Original spare part DEUTZ Power Systems 01167556 (0116-7556, 0116 7556). MWM/CAT engines TCG2020/CG170. 25 pieces on stock. Price without VAT (for export in all European Countries). Shipping costs are not included.The tran ...

Flat gasket for MWM/CAT DEUTZ Power Systems DEUTZ Power Systems 12301342


Flat gasket for MWM/CAT. Original spare part DEUTZ Power Systems 12301342 (1230-1342, 1230 1342). MWM/CAT engines TCG2020/CG170. 10 pieces on stock. Price without VAT (for export in all European Countries). Shipping costs are not included.The transp ...

Autoclaves Asca Ascamat 1000 L


Type: Ascamat 1000 L Serial number: 1510100125-1 Year of construction: 2015 Capacity: 1000 L Heating: Electric, 60kW Maximum pressure: 6 bar Maximum temperature: 150 °C With seperate 1000 L tank. Including crane unit for lifting the basket in and ...

Mold for ILLIG RDM70K ILLIG 71 mm dia


Mold for ILLIG RDM 70K manufactured by ILLIG, 24 Cavity for 71 mm PS Cups or 69 mm PP Cups, inclusive of inserts and Stacking Basket for the ILLIG ÜG70B Stacker/ Counter.

Mould for ILLIG RDM70K ILLIG 97 mm dia


95 mm PP/ 97 mm PS, 12 Cavity Mold manufactured by ILLIG, for the ILLIG RDM 70K inclusive of of Collector Plate and Stacking basket for the ILLIG UG70B Counter Stacker.

Assembly tables Wangle Basket 120x80, Kesseböhmer


Wanzl basket 120x80 - chrome finish. Condition : like brand new ! Special price : 25€ ! Manufacturer: Wanzl / Kesseböhmer Length: 1.20 m Width: 0,80 m Height: approx. 0.86 m chrome-plated on wheels On one truck max amount : 330 pcs We spe ...

Autoclaves Surdry / FMC 104


Product number: 898 Type: 104 Year of construction: 1991 Heating: steam Max. pressure: 5 bar Dimensions basket: 1000 x 1000 x 930 mm Dimensions: 4600 x 2100 x 2100 mm Stainless steel autoclave with spray water system. Including three stainless st ...

Wire drawing machine SKET UDZA5000/1


more technical infomration on request

Multi wire drawing machine SKET UDZA1250/6


input: 6mm output: 2mm

Wire drawing machine SKET UDZSA 5000/1


more information on request

Multi wire drawing machine SKET UDZA1250/6


More information on request

Hammer Mill 400 mm x 400 mm Ø Aubema Sandvik 1212/04-04


Hammer mill with inlet size 400 mm x 200 mm, perforated screening basket (3 mm), drive 22 kW / 1.500 RPM, be frame, belt-cover and flywheel. Rotor speed: 2.625 UPM, V = 55 m/s, rotor width: 400 mm, rotor diameter: 400 m. Refurbished, new bearings, suc ...

RICAMBI VARI DA IMPIANTI CENTRALE TERMOELETTRICA Various Various


Lot of goods coming from the warehouse of a thermoelectric power plant, on sale at clearance price because converting systems. The lot is to split and includes lots of baskets, baskets, baskets DESOX DENOX Ljungstroem, diaphragms, impellers, asynchronous  ...

Jaust Linomat L6


Formats: flat/basket/KEGGY, keg sizes: 10/15/20/30/50l, filling stations: 1, cleaning stations: 6. Capacity: 60 kegs/h

Electric nacelle Craft C9000


Other brand Model Craft C9000 ID 5008 Status Active Price 6,000 € + VAT Year 2014 Location Of Oradea, Romania Electrical Craft basket NEW C9000 year 2014. maximum working height: 9 m, platform size: 1830x1000

Basket Mill, Dissolver VMA-Getzmann Dispermat® AE03-C1-EX


Product volume: 0.25-10l, drive power: 1.1kW, speed: 0-10000rpm, equipment: basket mill TML, toothed discs, container clamping system, explosionprotected, control: panel Bartec EEx p Combi Panel.

CLEANER BUPI-GOLSER GMBH PT-DB 5HP


Qty. 1 Second-hand cleaner Mfc.: BUPI – GOLSER GmbH Type: PT-DB 5HP Built: 2010 Power: 53.5 kW Washing basket size: 1200 x 1200 x 1000 mm – L x W x H Space requirements: 3 x 5 m

WINDMOLLER & HOLSCHER W.& H. AGRI FILM EXTRUDER


AGRI FILM EXTRUSION LINE Film thickness 0.05-0.400 mm Calibration basket circumference range 2900-10100 mm W & H.Extruder with screw diameter : 150 mm 30 L/D Motor : 300 kW Replaced in Nov.2009 screw/barrel and grooved feeding zone Replaced in Dec 2 ...

Cleaning System D?rr Universal 81W


Cleaning Agent: watery cleaner, filling volume: approx. 1950l, basket size (LxWxH): 670x480x300mm, charging height: approx. 850mm, batch weight: 150kg. Additional Extras: Third flood tank, injection flood washing, vacuum drying, oil seperator, rinsing bat ...

MWM SPARE PARTS (WAREHOUSE SALE!) MWM GmbH TCG 2016


WAREHOUSE SALE! We offer genuine spare parts and consumables set like as piston, gaskets, lubricating oil filter, pressure limiters, spark plugs and ect. SPARE PARTS FOR MWM ENGINES : - TBG 616 - TCG 2016 - TCG 2016 C - TCG 2020 Please send y ...

MWM SPARE PARTS (WAREHOUSE SALE!) MWM GmbH TCG 2016


WAREHOUSE SALE! We offer genuine spare parts and consumables set like as piston, gaskets, lubricating oil filter, pressure limiters, spark plugs and ect. SPARE PARTS FOR MWM ENGINES : - TBG616 - TCG2016 - TCG2020 Please send your inquires to o ...
Find used machinery dealers in your country