used SEVA ENERGIE Block combined heat and power stations

Hydraulic pump from SEVA TEC, model SEV-MX3-112M-4. Good technical condition. Machine warehouse in warehouse in Poland, 55-300 Środa Śląska If necessary, additional photos or videos or if you are planning a visit to check our equipment, we invite you. Possible organization of transport, the cost of transport covered by the buyer. Person: Michal Pienio Production Manager UAP-2 marketing2.legnicafaurecia.com FAURECIA Legnica Decoration Plant, Interior Furnishings 180 Gniewomierz 59-241 Legnickie Pole – Poland M+48660719841 Faurecia Legnica Decorations S.A. . Gniewomierz 180, 59-241 Legnickie Pole, entered into the Register of Entrepreneurs of the Court Register kept by the District Court for Wrocław-Fabryczna in Wrocław, IX Commercial Department of the National Court Register, under KRS number No. 0000874432, NIP 6912552442, share capital: PLN 2,560,000.00 (pa ...

Quill processing unit, automatic drilling machine, drilling machine, standing drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Drive: 0.25 kW -Speed: 2755 rpm -Bore head: Ø 12 mm -fixed, without feed -Number: 8x drill heads available -Price: per piece -Dimensions: 700/120/H150 mm -Weight: 11 kg/piece

Quill processing unit, automatic drilling machine, drilling machine, standing drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Drive: 0.25 kW -Speed: 2755 rpm -Bore head: Ø 12 mm -fixed, without feed -Number: 3x drill heads available -Price: per piece -Dimensions: 470/120/H150 mm -Weight: 7 kg/piece

Electric motor, three-phase motor -Power: 0.25 kW -Speed: 2755 rpm -Shaft: Ø 11 x 20 mm -Construction: B14 -Flange: Ø 90 mm -Protection class: IP 54 -Price: per piece -Number: 1x available -Dimensions: 230/118/H165 mm -Weight: 5 kg

Gear motor, electric motor -Speed: 120 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter shaft: Ø 18 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 350/200/H190 mm -Weight: 10 kg

CHP basic module agenitor 212 (fully mounted on steel frame with vibration decoupling) - Motor with accessories - Gas controlled system - Gas mixer -Generator -Voltage regulator - Cos-phi regulator -Clutch - Switchgear and control system - Exhaust silencer made of stainless steel CHP power field - Separate control cabinet with load switch and mains monitoring Heat exchanger cabinet, pre-piped mounted in steel frame - Heat extraction / hydraulic system - 3-way mixer emergency cooling circuit - electric circulating pump, mixture cooler - 3-way mixer mixture cooling circuit - Pressure compensation tank - Plate heat exchanger as transfer heat exchanger - electric circulating pump heating side - 3-way mixer return temperature increase Mixture cooler as table cooler Emergency cooler as table cooler to dissipate excess thermal energy. The entire thermal energy fro ...

CHP basic module agenitor 206 / 220kw/el. (fully mounted on steel frame with vibration decoupling) - Motor with accessories - Gas controlled system - Gas mixer -Generator -Voltage regulator - Cos-phi regulator -Clutch - Switchgear and control system - Exhaust silencer made of stainless steel CHP power field - Separate control cabinet with load switch and mains monitoring Heat exchanger cabinet, pre-piped mounted in steel frame - Heat extraction / hydraulic system - 3-way mixer emergency cooling circuit - electric circulating pump, mixture cooler - 3-way mixer mixture cooling circuit - Pressure compensation tank - Plate heat exchanger as transfer heat exchanger - electric circulating pump heating side - 3-way mixer return temperature increase Mixture cooler as table cooler Emergency cooler as table cooler to dissipate excess thermal energy. The entire thermal ...

Combined heat and power plant with Ford gas engine 12 kW electric complete with heat release and sound insulation hood B&R Control Water-cooled asynchronous generator

Natural gas CHP with 20 kW electrical power of the company KW Energie. Koplett with acoustic hood and external sound absorber

The plant is 6 months old and is being abandoned due to conversion of production. The plant is still in use today, so it can be visited in operation. The installation site was an all-round closed hall, so the system is as good as new and enables the economic use of heat energy. In addition, the electric feed-in tariff for the electricity generated in your CHP is improved. 3 cent CHP bonus according to EEG-2009 per kilowatt hour used. There are 2 containers of wood chips/firewood (35m3) to be connected. NOTE TO PICTURES: Plant can only dry 2 containers and is half as wide as shown on pictures. Construction analogous to drying system for 4 containers! Drying time wood chips: 4 days (fresh forest to 10% residual moisture) Drying time log wood (33cm): 5 days (fresh from the forest to 20% core moisture) System consists of: intake hopper for air incl. dust filter Blower unit ( ...

Wood chip dryer, firewood dryer for 4 containers The plant is abandoned due to conversion of the production. The plant is still in use today, so it can be visited in operation. The installation site was an all-round closed hall, so the system is as good as new and enables the economic use of heat energy. In addition, the electric feed-in tariff for the electricity generated in your CHP is improved. 3 cent CHP bonus according to EEG-2009 per kilowatt hour used. 4 containers of wood chips/firewood can be connected ( 35m3). Drying time wood chips: 4 days (fresh forest to 10% residual moisture) Drying time log wood (33cm): 5 days (fresh from the forest to 20% core moisture) System consists of: intake hopper for air incl. dust filter Blower unit (radial fan with motor 11kW) Heater 480kW Funnel for air flow incl. 4 shut-off valves and & 4 pieces connections Power con ...

Combined heat and power plant of the company KW Energie 4 cylinder MAN gas engine with 48 kW electric power Complete with heat release and sound insulation hood Switch box with B&R control

Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Speed: 7500 rpm -Shaft: Ø 35 mm -Dimensions: 370/192/H295 mm -Weight: 24 kg

PCA Senertec heating oil system used with 32000 hours of operation System until the very end in operation Regulator in MSR1 Performance increase Power 5,3 kW thermal power 10,5 kW

CHP 60kW of electric power with approx. 108kW of thermal performance Compact system with enclosure and Cabinet mounted on the system. incl. power factor correction and emergency cooler.

We sell a used natural gas cogeneration manufacturer spilling, type power Therm with an electrical output of 20 kW.

We offer as follows: 2 pieces Jenbacher CHP type JMS 316 GS-C21 Generator: inchAVKinch 1110 kVA Technical data: Engine power approx. 1922kW electrical power: approx. 736kW electrical efficiency approx. 38.3% Thermal power: approx. 912 kW Thermal efficiency: approx. 46.9% Built: 2000 The plants sing needed. The sale is subject to any warranty.

Many thanks for your interest in our machinery, please find below our offer: Combined heat and power plant (CHPU)with up to 500KW A total of 3 independent cogenerators with combined heat and power; Electricity & hot water With only max 13280 operation hours!!! Operation is done with heating oil !!! Permission available Total power approx. 500kw, cascade connection, in depending on power requirements, the various energy producers gradually switch on and regulate themselves on the performance. At peak load, all 3 systems work in parallel with full output Ideal for power supply in remote areas without public supply or as emergency power supply with simultaneous heat recovery if desired. Each engine has a heat exchanger. If heat is not needed, it can also be removed. The plant is constructed and ready, accordingly control etc. Top maintained. Spare parts for maintenance etc ...

Standard scope of delivery â?¢ 12 cylinder four-stroke gas engine in V-arrangement based on MAN diesel engine single-cylinder heads, high-alloy valve seat rings and valves, form-forged crankshaft with screwed counterweights, wet cylinder jacks, piston cooling over oil spray nozzles â?¢ Compression ratio 14:1, biogas 1500 rpm â?¢ Main power oil filter, 2-fold, reclining, not switchable with oil cooler â?¢ Closed crankcase ventilation with oil separator â?¢ Flywheel case SAE 1 â?¢ Flywheel I = 2.292 kgm2 for clutch SAE 11.5 and SAE 14 with tooth wreath â?¢ Anlassser â?¢ Valve solvets made of hard metal â?¢ Cam shaft with drive wheel for electric ignition equipment â?¢ Exhaust collection mammals line uncooled, isolated â?¢ Exhaust turbochargers water-cooled, ...

We offer two Deutz/MWM type for purchase: TBG 604 CV16. The CHPs ran flawlessly until they were decommissioned. Scope of delivery: engine, generator, control cabinet, gas section, exhaust heat exchanger, silencer and documents.

CHP combined heat and power plant with 2 x 910kVA generator from a biogas plant with gas engine Waukesha Model: P48GLD 1 generator installed in the container 1 generator disassembled as a spare donor (or reconstruction) Manufacturer: Zantingh Groep Holland Type: Tantec 630 HR Motor 1-2 Ser.Nr: 975100 Y.O.M.: 1997 Total weight engine 1: 17000 kg Generator Manufacturer: Stamford Type: HC.1624M2 No./Y.: C077726-02/1997 AVR - Mx321 Power: 910 kVA, 1500 rpm 400 V; 1313.5 A; 50 Hz; IP22 Diesel/gas engine Manufacturer: Waukesha Model: P48GLD No./Y.: 80464-01/1997 Fuel: Nat.-GAS / Biogas Power: 726 kW; 1500 rpm other components - Control/switch cabinet of nib-elektrotechniek with Zantingh Master-Control - Grundfos pumps - Plate heat exchanger - Silencer - various wiring and piping - Housing container with ventilation Container Dimensions Wide approx. 3.70 ...

complete 230kW

We offer a Liebherr G944 for sale.

We offer for sale two pieces MWM TBG 616 V8 K.. Technical data engine: Engine manufacturer: MWM Engine type: TBG 616 V8 K Rated power: 300 kW Speed: 1500 rpm Fuel: Natural gas Technical data generator: Generator manufacturer: Stamford Generator power: 600 KVA Voltage: 400 / 231 Volt Power factor: cos. - phi 0.8 Speed: 1500 rpm Year of construction: 2004 Operating hours: 57,000 h Location: Cologne

We offer for sale a piece mwM TBG 616 V 8 K. Technical data engine: Engine manufacturer: MWM Engine type: TBG 616 V 8 K Rated power: 350 kW Speed: 1500 rpm Fuel: Natural gas Technical data generator: Generator manufacturer: Stamford Generator power: 550 KVA Voltage: 400 / 231 Volt Power factor: cos. - phi 0.8 Speed: 1500 rpm Year of construction: 1996 Location: Cologne