Category: 203 planing machines / Thicknessing machines
Latest update: 21.03.2024 add to watchlist
approved
dealer
item-No.: 118580436

used

Location: Land-it

add to watchlist

THICKNESS PLANER type SAC SUERI RS 53 S second hand machine CE mark : Yes technical details : useful working width mm. 530 maximum (minimum) working height mm. 300 (3) maximum removal mm. 8 variable feed speed by inverter m / min. 4 ÷ 16 motorized table positioning with electronic reading n.4 knives "Tersa" main motor power Hp 5,5 volt. 380/50

Category: 203 planing machines / Surface planing and thicknessing machines
Latest update: 14.02.2024 add to watchlist
approved
dealer
item-No.: 151260052

new

check Seller: WEIBERT maschinen
Location: Land-de

add to watchlist

SCM fs41 elite Dressing thickness planer Planing width 410mm with 4 TERSA planer knives Two feed speeds 6 and 12m/1 400 V 3KW (4 hp ) S1 100% Dressing table length 2000mm Max chip removal of 5mm Planing shaft D=90mm Work tables made of grey cast iron Table adjustment with numerical display Pass-through height 3-230mm Slanted geared steel feed roller Breaking stop with precise round rod guide 90-45° Suction nozzle 120mm

Category: 203 planing machines / Surface planing and thicknessing machines
Latest update: 27.12.2023 add to watchlist
approved
dealer
item-No.: 159589864
New in: 2023

new

check Seller: MISCHI KURT
Location: Land-it
Price: 12.000 € add to watchlist

working width 520 mm Total dressing table length 2250 mm chip removal 5 mm Thickness planing table dimensions 520 x 850 mm Feed speed on thickness planer 6/12 m/min Min./max. working height on the thickness planer 3.5 ÷ 240 mm Main motor power 7 kw Suction nozzle diameter Ø 120 mm Air consumption 1000 m³/h

Category: 203 planing machines / Surface planing and thicknessing machines
Latest update: 27.12.2023 add to watchlist
approved
dealer
item-No.: 159596378
New in: 2023

new

check Seller: MISCHI KURT
Location: Land-it
Price: 18.400 € add to watchlist

L'invincibile fs 7 with tersa and aid attack Usable working width mm 520 Planing shaft diameter (number of blades) mm 120 (4) Engine power kW (hp) 9 (12) Dressing planer Total table length mm 2300 Dressing stop dimensions mm 1200x190 Adjustable dressing stop from 90° to -45° Thickness planer Workpiece storage (min./max.) mm 3/250 Feed speed m/min 5-8-12-18 - Spiral Wave Xylent - WITHOUT AID ATTACK EXPORT PRICE

Category: 203 planing machines / Surface planing and thicknessing machines
Latest update: 27.12.2023 add to watchlist
approved
dealer
item-No.: 160676222
New in: 2023

new

check Seller: MISCHI KURT
Location: Land-it
Price: 9.800 € add to watchlist

working width 410 mm chip removal 5 mm SPIRAL PLANER SHAFT XYLENT ELECTRIC SLIDING TABLE LIFT DIGITAL DISPLAY FOR THICK TABLE POSITION Suction nozzle diameter Ø 120 mm Air consumption 1000 m³/h

Category: 203 planing machines / Thicknessing machines
Latest update: 27.12.2023 add to watchlist
approved
dealer
item-No.: 160753441
New in: 2023

new

check Seller: MISCHI KURT
Location: 39010 GARGAZON Land-it
Price: 12.600 € add to watchlist

Planer width 630 mm chip removal 8 mm Planer shaft type Xylent spiral Main engine 7 kw HP HP 9,5 50 Hz Third pull-out roller min max planing height 3.5 mm - 300 mm

Category: 203 planing machines / Surface planing and thicknessing machines
Latest update: 26.10.2023 add to watchlist
approved
dealer
item-No.: 161283509

used

check Seller: FHU Mateusz Guzik
Location: 34-23 JUSZCZYN Land-pl

add to watchlist

Planer SCM F520 Class Working width 520mm Electric planing height adjustment 4-knife shaft Traditional knives Sampler adjustable at an angle of 45 Worktop length 2990mm Extraction connection 115mm Motor power 4kw

Category: 203 planing machines / Surface planing and thicknessing machines
Latest update: 27.12.2023 add to watchlist
approved
dealer
item-No.: 162126102
New in: 2023

new

check Seller: MISCHI KURT
Location: Land-it
Price: 8.500 € add to watchlist

Planing width 410 mm Xylent Shaft Electric thickness table lift with digital display AVAILABLE FROM STOCK

Category: 203 planing machines / Thicknessing machines
Latest update: 08.03.2024 add to watchlist
approved
dealer
item-No.: 162166493

used

check Seller: Urbicht-Maschinenhandel
Location: Land-de
Price: 5.250 € add to watchlist

Key data: 520

SCM thickness planer S 52 Product name: Thickness planing machine Type: S52 Manufacturer: SCM (SCM Industria S.p.A.) Machine number: Condition: Used Technical details: - Work table size: 520 x 850 mm - Working width: 520 mm - Chip removal max.: 8 mm - Passage height min.: 3 mm - maximum planing height: 230 mm - Knife shaft diameter: 120 mm - Planer shaft with 4 pieces of Tersa knife - Sectional pressure roller - Knife shaft speed: 4,500 rpm - Feed speed for thickness planing: 6 -10 - 13 - 17 m/min - Table lift motorized and fine adjustment by hand - numerical display of the table height - Deliverable pull-out roller in the thickness table - 2 Aigner mounting rails (1x input table, 1x output table) - Weight: 600 kg Engine data: - Voltage: 380 V - Current: 12 A - Frequency: 50 Hz - Power: 5.5 kW - Speed: 2,900 rpm The machine was completely refurbished  ...

Category: 203 planing machines / Thicknessing machines
Latest update: 19.01.2024 add to watchlist
approved
dealer
item-No.: 163176794

used

check Seller: Mercator S.R.L.
Location: 34071 Cormons Land-it

add to watchlist

Key data: 500 mm, 250 mm

SPECIFICATIONS: Max. working width mm: 500 Max. machining height mm: 250 Roller with 4 blades Voltage: 3800 volts Manual operation

Category: 203 planing machines / Thicknessing machines
Latest update: 28.02.2024 add to watchlist
approved
dealer
item-No.: 163466376

used

check Seller: Sixt Holzbearbeitungsmaschinen GmbH
Location: 8501 Lieboch Land-at

add to watchlist

heavy-duty thickness planer SCM S 520 Planing width 520 mm Planing height max. 250 mm Chip removal 3 - 8 mm Ribbed Steel Feed Roller Rubber pull-out roller 4-knife planer shaft, diameter 120 mm motorized height adjustment l mech. DIGITAL Feed rate 5 - 8 - 12 - 18 m/min. Machine is WORKSHOP OVERHAULED IN TOP CONDITION

Category: 203 planing machines / Surface planing and thicknessing machines
Latest update: 28.02.2024 add to watchlist
approved
dealer
item-No.: 163466385

new

check Seller: WEIBERT maschinen
Location: Land-de
Price: 10.840 € add to watchlist

Weibert fs 52es TERSA digital Dressing thickness planer Planing width 520mm Tersa 4 Knife Shaft Dressing table length 2250mm Planer fence 1500mm 90°-45° Machine Grey Cast Iron Tables 7 KW (9.5 HP) 400V 50 HZ Thickness table 850x520mm Passage of 3 / 240mm Electric height adjustment of the thickness table 4 feed speeds 5 / 8 / 12 / 18 m/min Dual folding system of the tables to the rear max. chip removal 5mm Speed 5000 min/1 1 extraction connection 120 mm Weight approx. 700 kg G&STÜ-5503511

Category: 203 planing machines / Thicknessing machines
Latest update: 07.03.2024 add to watchlist
approved
dealer
item-No.: 163526811

used

check Seller: Caselli Group Spa
Location: 33048 S.Giovanni al Natisone Land-it

add to watchlist

SECOND-HAND COMBINED THICKNESSER - SURFACE PLANER SCM L'INVINCIBILE 500 MM.

Category: 203 planing machines / Surface planing and thicknessing machines
Latest update: 23.03.2024 add to watchlist
approved
dealer
item-No.: 163637378
New in: 1998

used

check Seller: Fritz Ernst Maschinenhandel e K
Location: Land-de
Price: 9.200 € add to watchlist

Key data: 520 mm, 250 mm, 5 kW

Used comb. Dressing / Thickening Manufacturer: SCM Type FS 520 Built in 1998 4-Knife Wersa Shaft Planing width 520 mm Total length of dressing tables 2,300 mm Planing height 250 mm Inclination of the joint fence 90° to -45° Power 5.5 kW With engine brake Slotted table lips Weight 980 kg With pneum. Quick changeover system dressing -> thickness -> dressing Very neat overall condition.! Location: 59425 Unna The machine can be viewed under electricity. A forklift for loading is available. We reserve the right to sell in advance. It is possible to expertly inspect the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty/guarante ...

Category: 203 planing machines / Four-sided planing machines
Latest update: 08.12.2023 add to watchlist
approved
dealer
item-No.: 105470155
New in: 1983

used

check Seller: MATEC system+technik GmbH
Location: Land-de
Price: VB 5.880 € add to watchlist

4-side Planer SCM P 75 Year of construction 1983 Masch. No. 045 8vsoczcl8 Planing width of 180 mm Planing height of 130 mm 4 spindle length 2500 mm Weight 1670 kg L x W x h: 310 x 120 x 180 cm The machine is in good condition, little used, ready for use. Subject to changes, errors, and intermediate sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Category: 203 planing machines / Surface planing machines
Latest update: 20.09.2021 add to watchlist
approved
dealer
item-No.: 118580443

used

Location: Land-it

add to watchlist

THICKNESS PLANER type SCM S 52 SURFACE PLANER type SCM F 410 SPINDLE MOULDER type SCM T 130 NOT SEPARATE SALE second hand machines

Category: 203 planing machines / Four-sided planing machines
Latest update: 31.01.2023 add to watchlist
approved
dealer
item-No.: 124002086

used

Location: Land-it

add to watchlist

MULTI MOULDERS machine with 7 shafts type SCM SUPERSET 23 PLUS . with SLIDE and RETURN PIECES type MAHROS RP/4 second hand machine CE mark : Yes volt. 380/50 - Composition (7 shafts , 7 independent engines): 1° shaft : lower horiz . motor power Hp 7,5 2° shaft : right vertical . motor power Hp 7,5 3° shaft: left vertical (automatic). motor power Hp 7,5 4° shaft : upper horiz. motor power Hp 10 5° shaft : upper horiz. motor power Hp 10 6° shaft : lower horiz. motor power Hp 7,5 7° shaft : universal 360° . motor power Hp 10 grove table inlet length mm. 2400 feed speed: from 5 to 35 mt./min max. useful working width mm. 230 max. useful working height mm. 120 shaft diameter mm.40 automatic lubrication system weight kgs. 4300

Category: 207 gluespreader machines / Edge gluing machines
Latest update: 01.05.2023 add to watchlist
approved
dealer
item-No.: 147697286
New in: 2003

used

check Seller: Chicagowood Malax
Location: Land-fi
Price: VB 4.900 € add to watchlist

SCM Olimpic K201 HFA Year 2003 SN AH/107773 Working thickness 8-40mm Ribbon edge thickness 0.4-3mm Thickness of the wrapped edge 0.4-1.2 mm single-motor end cutting unit ( 12,000 rpm ) Edge milling unit for hot melt adhesive in granulate form, which is applied with a roller Cutter for collided edges max. thickness 1.2 mm 2 edge pressure rollers Feed speed 8 meters/minute Suction nozzle 3 1/8" Pneumatic smatics 6 bar Dimensions 2080 x 1195 x 1400 mm Voltage 220 Phase CE marked

Category: 204 grinding machines / Long belt grinding machines
Latest update: 08.03.2024 add to watchlist
approved
dealer
item-No.: 157330549
New in: 2007

used

check Seller: Urbicht-Maschinenhandel
Location: Land-de
Price: 1.550 € add to watchlist

SCM Long Belt Grinding Machine LS-2500 Product name: Long belt grinding machine Type: LS-2500 Manufacturer: SCM (Villa Verucchio, Spain) Machine number: KK /003701 Condition: used, completely refurbished technical details: - Workbench length: 2,500 mm - Workbench height (depth): 800 mm - vertical stroke of the workbench: 720 mm - Length of sanding belt: 7,100 mm - Width sanding belt: 150 mm speed sanding belt: 18 m/sec - Crank depth: 800 mm - Crank height: 126 mm - Diameter of pulleys: 250 mm - 2 x suction opening a 120 mm Engine data: - Voltage: 380 V - Current: 7.1/5.3 A - Power: 3/2.2 kW - Frequency: 50 Hz - Speeds: 2800/1400 rpm Installation dimensions (W x D x H): 3,835 x 2,231 x 1,650 mm (without suction connections!) Transport dimensions (W x D x H): 3,900 x 1,500 x 1,850 mm (mounted on metal carrier!) The machine was completely refurbished and ...

Category: 203 planing machines / Four-sided planing machines
Latest update: 13.03.2024 add to watchlist
approved
dealer
item-No.: 158283116
New in: 2001

used

check Seller: P.P.H.U. MAR-MASZ Henryk Pioch
Location: Land-pl
Price: 38.814 € add to watchlist

Part Number 6368 TECHNICAL DATA - max width of the workpiece 230mm - max height of the workpiece 130mm 7 spindles: 1) horizontal bottom 230mm 5,5kW 2) vertical right 130mm 5,5kW 3) vertical left 130mm 5.5kW 4) horizontal top 230mm 7,5kW 5) horizontal upper 230mm 11kW 6) horizontal bottom 230mm 18,5kW 7) universal 230mm adjustable at 360 degrees 5.5kW - all spindles adjustable up/down, right/left - all spindles equipped with an electric brake - spindle diameter 40mm - spindles 4 and 5 electrically adjustable up/down - from above 8 metal pulling introductory shafts, swivel including 2 double - from above 4 pulling rollers, rubber - pressure from above 2pcs - from the bottom of the ratchet - from the bottom from the side 3 clamps - from below 2 metal rollers, smooth, pulling - from the bottom 2 double rollers, pulling, rubber - pneumatically pressed shafts ...

Category: 209 other wood working machines / Combi-machines
Latest update: 13.12.2023 add to watchlist
approved
dealer
item-No.: 158927788

new

check Seller: WEIBERT maschinen
Location: 63768 Hösbach - Rottenberg Land-de

add to watchlist

SCM C30 4-fold combination machine Format Circular Saw Dressing Thickness Planer Machine Milling Machine Planing width 300mm Planing shaft: 3-tersa knife shaft Dressing table length: 1200mm Passage height: 3-200mm Format sliding table: 1070mm Besaeumlaenge Cutting height: 80mm Saw 90°-45° swivel Engine power: 400V 2 hp S1 Milling machine rigid 90° Milling machine rpm: Speeds of 4200-6300 rpm or 5000-7500 rpm G&STÜ-5500030 relkag21 SPECIAL PRICE: Fits in any small workshop!!!!!

Category: 204 grinding machines / Wide belt grinding machines
Latest update: 04.11.2023 add to watchlist
approved
dealer
item-No.: 159899352
New in: 2012

used

check Seller: Optimall, s.r.o.
Location: 06001 Kežmarok Land-sk
Price: 25.000 € add to watchlist

I sell a wide belt grinding machine SCM Sandya 16 S 110, built in 2012. Configuration: 18.5 KW hard-rubber grinding cylinder 15 KW hard-rubber grinding cylinder 11 KW combi unit soft-rubber cylinder + pneumatic shoe. Working width 1100mm. Pressure rollers for short elements. Compressed air Clean for all units. Weight 2750kg 3 motors 18,5 + 15 + 11kW Incl. full documentation. Condition AS NEW ! The machine did very little work. Available the same.

Category: 204 grinding machines / Wide belt grinding machines
Latest update: 07.12.2023 add to watchlist
approved
dealer
item-No.: 160161946

used

check Seller: FHU Mateusz Guzik
Location: 34-23 JUSZCZYN Land-pl

add to watchlist

Wide-belt sander SCM Sandya Uno Main engine 7.5kw Feed motor 0.3kw Two grinding units Working width 900mm Pneumatic oscillation Spotted shoe Dimensions 1420mm 1790mm 1590mm Weight 1050kg

Category: 203 planing machines / Four-sided planing machines
Latest update: 28.11.2023 add to watchlist
item-No.: 160197429
New in: 2007

used

Seller: StanDrew
Location: Land-pl

add to watchlist

– Italian production – year of manufacture 2007 TECHNICAL PARAMETERS: planing width 230 mm planing height 120 mm 1) horizontal bottom 230 mm 5.5 kW 2) vertical right 130 mm 3) vertical left 130 mm (2 and 3 spindle) 11 kW 4) horizontal top 230 mm 7.5 kW all spindles up/down, right/left spindle diameter 40 mm from above 3 insertion rollers pulling metal, swivel including 2 double pulling lead shaft from above, double rubber on the side, pressure 1 pc. in the lower table top a rubber pulling roller feed on cardan rollers pneumatic clamps infinitely variable feed speed 5-22 m/min feed motor 1,1 kW electrical setting of planing thickness lifting engine 0,37 kW introductory table length 2470 mm enclosed in the cabin central lubrication of the table top extraction pipe diameters 150 and 180 mm dimensions (L/W/H) 3650 / 1200 / 1600 mm wei ...

Category: 203 planing machines / Four-sided planing machines
Latest update: 28.11.2023 add to watchlist
item-No.: 160197496
New in: 2011

used

Seller: StanDrew
Location: Land-pl

add to watchlist

– after technical inspection – Italian production – year of manufacture 2011 TECHNICAL PARAMETERS: planing width 240 mm planing height 130 mm spindle diameter 40 mm spindle speed 6000 rpm 1 bottom spindle 3 kW 2 right spindle 7.5 kW 3 left spindle 5.5 kW 4 upper spindle 6 kW 5 bottom spindle 5.5 kW six upper pulling rollers pneumatic pressure feed adjustable on the inverter feed speed range 5-25 m/min adjustable heads table top length 2480 mm electric brakes connection diameter 2 x 180 mm and 2 x 150 mm dimensions of the machine (L/W/H) 340 / 160 / 170 cm weight 2480 kg

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
SCM 3rd category level
 
RESALE used machinery 25 years online