Category: 202 milling machines / Spindle moulders
Latest update: 08.12.2023 add to watchlist
approved
dealer
item-No.: 22360507
New in: 1961

used

check Seller: MATEC system+technik GmbH
Location: Land-de
Price: VB 1.760 € add to watchlist

Table milling machine SCM T 120 C. SUVA protection Maintenance: Malawer AG Spindle 30 mm 2900/4400/6000/7800/10000 RPM Weight 450 kg Masch No. 20474 L x W x H: 115 x 90 x 86 (150) cm Built in 1961 Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Category: 202 milling machines / Spindle moulders
Latest update: 14.11.2022 add to watchlist
approved
dealer
item-No.: 128705489

used

Location: Land-it

add to watchlist

SPINDLE MOULDER type SCM T130 . second hand diam. spindle mm. 40 volt. 380/50

Category: 203 planing machines / Moulders
Latest update: 14.11.2023 add to watchlist
approved
dealer
item-No.: 144094780
New in: 2012

used

check Seller: Mercator S.R.L.
Location: Land-it

add to watchlist

Planing width mm: 330 Planing height mm: 120 Inlet table length mm: 1800 Feed max m/min: 6-36 (inverter) Speed max: 6500 Number of spindles: 6 Spindle arrangement: 01 - Planing shaft - KW 15 01 - Spindles right - KW 15 01 - Spindles left - KW 15 01 - Spindles above - KW 15 01 - Spindles above KW 18 01 - Spindles below KW 15 Software: Control 100 PC Plus Spindle diameter mm: 50 Handling System Weight Kg: 5000

Category: 202 milling machines / Top-spindle moulders
Latest update: 14.11.2023 add to watchlist
approved
dealer
item-No.: 147275809

used

check Seller: Max Mayer Maschinenbau - Maschinenhandel - Reparatur
Location: 84347 Pfarrkirchen Land-de
Price: 3.000 € add to watchlist

With feed and vacuum pump

Category: 202 milling machines / Top-spindle moulders
Latest update: 14.11.2023 add to watchlist
approved
dealer
item-No.: 147275810

used

check Seller: Max Mayer Maschinenbau - Maschinenhandel - Reparatur
Location: 84347 Pfarrkirchen Land-de

add to watchlist

--------------------

Category: 202 milling machines / Spindel moulders
Latest update: 11.03.2024 add to watchlist
approved
dealer
item-No.: 151875400

used

check Seller: Maschinen-Kaul GmbH & Co.KG
Location: 40549 Düsseldorf Land-de

add to watchlist

Facilities: - Aigner Integral Stop - Feed apparatus (3 rolls) - manual foot brake - Height adjustment by hand wheel - Aigner table extension

Category: 202 milling machines / Tilting spindle moulders
Latest update: 11.03.2024 add to watchlist
approved
dealer
item-No.: 152854607
New in: 2008

used

check Seller: Maschinen-Kaul GmbH & Co.KG
Location: 40549 Düsseldorf Land-de

add to watchlist

equipment: - swivel. Control panel with Vanguard control (12" LCD screen with touch screen operation) with 999 program slots - controlled axes: Spindle height, spindle inclination, milling stop, table insert, speed 900-12,000 rpm, control feeder and right/left run - LL version (table extension on both sides) with extendable support specifications: Dimensions work table: 2500 x 750 mm Spindle swivel range: +/- 45.5° Tool change system: HSK B 63 Clamping length Milling spindle 140 mm Supernated spindle base from the table 54 mm max. tool diameter under table 300x75 mm "Flex" milling stop run (positioning with respect to the spindle axis) 250° (from -125° to +125°) Outer suction nozzle on the cutting guard 120 mm Outer suction nozzle s on the base 150 mm (for air-force cooling of the electric spindle) Suction. 20 m/sec Suctionvol. 2100 m3/h Engine power 7.5 kW Tech ...

Category: 202 milling machines / Spindel moulders
Latest update: 05.02.2024 add to watchlist
approved
dealer
item-No.: 161693373
New in: 1999

used

check Seller: Baldin SRL
Location: 36066 Sandrigo Land-it

add to watchlist

Spindle moulder SCM model T130N: – 1200 x 730 mm worktop – FAST sector plan, instead of rings – shaft D=35mm – Motor power kw 5,5 / HP 7,5, volt 380 – 5 shaft rotation speeds: 3000/4500/6000/7000/10000 rpm – adjustable spindle moulder cap – complete with 3-wheel driver Machine according to CE regulations

Category: 202 milling machines / Spindle moulders
Latest update: 08.01.2024 add to watchlist
approved
dealer
item-No.: 161694187

used

check Seller: Mercator S.R.L.
Location: Land-it

add to watchlist

SPECIFICATIONS: Working table: 1100 x 900 mm Spindle: Ø 40 mm Manual adjustment Engine brake Installed power 5.6 kW Additional: Various tools

Category: 202 milling machines / Spindle moulders
Latest update: 08.01.2024 add to watchlist
approved
dealer
item-No.: 161694191

used

check Seller: Mercator S.R.L.
Location: Land-it

add to watchlist

SPECIFICATIONS: Working table: 1050 x 970 mm Sliding table Spindle: Ø 35 mm Manual adjustment Engine brake Installed power 5.60 kW Inclusive: Various tools

Category: 202 milling machines / Spindle moulders
Latest update: 08.01.2024 add to watchlist
approved
dealer
item-No.: 161723421

used

check Seller: Mercator S.R.L.
Location: Land-it

add to watchlist

SPECIFICATIONS: Spindle diameter mm: 35 Installed power HP: 7.5 Spindle brake Sliding transport trolley at the front

Category: 203 planing machines / Moulders
Latest update: 22.01.2024 add to watchlist
approved
dealer
item-No.: 161906132

used

check Seller: Mercator S.R.L.
Location: Land-it

add to watchlist

SPECIFICATIONS: Working width: max. 230 mm Working height: max. 120 mm 6 spindles (1 universal) Spindles: Ø 40 mm Pre-spindle machine inlet: 2500 mm Cardan shaft drive Manual lubrication Manual spindle adjustment Installed power: 27 KW

Category: 202 milling machines / Spindel moulders
Latest update: 31.01.2024 add to watchlist
approved
dealer
item-No.: 161938385

used

check Seller: FHU Mateusz Guzik
Location: Land-pl

add to watchlist

Spindle tenoning machine SCM T130 Motor power 7,5kw Machine control from puplite Electric spindle setting Sidecar for trunnion Total spindle height 200mm Spindle diameter 40mm Variable rotation on the belt Spindle speed 3000/4500/6000/7000/10000rpm CE Certificate Extraction nozzles 2x120mm

Category: 202 milling machines / Top-spindle moulders
Latest update: 29.09.2023 add to watchlist
approved
dealer
item-No.: 162504935

used

check Seller: DH Maschinenhandel
Location: 32609 Hüllhorst Land-de

add to watchlist

Router with table widening Speed: 10,000 – 20,000 rpm. Table dimensions: 900 mm x 765 mm4. Engine 3 kW5. 380 V Dimensions: 900 mm x 1400 mm x 1600 mm Weight approx. 575 kg

Category: 202 milling machines / Tilting moulders
Latest update: 15.11.2023 add to watchlist
approved
dealer
item-No.: 162811115

used

check Seller: Mercator S.R.L.
Location: 34071 Cormons Land-it

add to watchlist

SPECIFICATIONS: Tool shank diameter: mm 35 Right - Counterclockwise SPEED: 3,000/6,000/7,000/10,000 Motorized spindle inclination from -10° to 45°.

Category: 202 milling machines / Tilting spindle moulders
Latest update: 14.01.2024 add to watchlist
item-No.: 163145317

used

Seller: Tischlereimaschinen - Kenkel
Location: Land-de
Price: 18.000 € add to watchlist

Good day! I would like to offer you the following machine: 1 used swivel spindle table milling machine T 150 Class - Spindle inclination -10° to +45° - Spindle diameter 30 mm - Spindle quick-change device with pneumatic release device - 5 interchangeable spindles 30 mm with a stand - Motorized height and swivel adjustment of the milling spindle - 5 speeds up to 10000 rpm. - 5.5 KW 380 volt motor - Operating pressure of the pneumatics 6 bar - Swivel segment for milling fence - Aluminium stop jaws with insert strips for continuous workpiece support - Infinitely adjustable table insert instead of table rings Adjustable from the outside, for the largest possible workpiece support - Extraction hood under table with nozzles 120 mm - Bow milling guard (unused) with suction nozzle 120 mm - Clockwise/counterclockwise rotation - Socket for  ...

Category: 202 milling machines / Tilting spindle moulders
Latest update: 27.02.2024 add to watchlist
approved
dealer
item-No.: 163452651

used

check Seller: Mercator S.R.L.
Location: 34071 Cormons Land-it

add to watchlist

Key data: 1000 mm, 4 kW, 35 mm

SPECIFICATIONS: Workbench mm: 1000 x 1000 with 4-roller Europa drive with variator Installed capacity KW: 4.0 Diameter of spindle mm: 35 Tilting spindle shaft Max. vertical stroke mm: 210 Tilt: 0° - 45°

Category: 202 milling machines / Spindle moulders
Latest update: 11.03.2024 add to watchlist
approved
dealer
item-No.: 163553555

used

check Seller: Walter Hirsch Maschinenhandel
Location: 94244 Geiersthal Land-de
Price: 1.090 € add to watchlist

Bench milling machine Wood milling machine Carpentry milling machine SCM Type: T120C 5 speeds adjustable 2900/4400/6600/7800/10 000 rpm Table dimensions approx. 110 x 90 cm Milling fence with fine adjustment Milling fence can be rotated on the machine table. max. tool diameter 325 mm incl. milling shaft 30 mm suitable feeders can be found in my other articles. Condition see pictures, or please refer to the item description. Parts can also be picked up by yourself. All measurements are approximate. All information to the best of our knowledge but without warranty. Subject to prior sale. The items can be picked up by yourself or shipped at the expense of the buyer. Shipping costs are a guideline, depending on the distance and unloading option, they may vary.

Category: 201 saws
Latest update: 02.02.2024 add to watchlist
approved
dealer
item-No.: 2658377

new

check Seller: WEIBERT maschinen
Location: Land-de

add to watchlist

S 400 elite S 32 professional format circular saw Trimming length 3200 mm max. cutting height 138/98 mm 90/45 with scribble max. saw blade diameter 400 mm Speed Main saw blade 4000/5000 rpm Engine power 7 kW 9.5 hp 400 V 50 Hz Prescribing 0.55 kW/0.75 hp Upper protective hood Suction nozzle diameter 120 mm Weight 715 kg G&STÜ-5504842 Option: Angular cutting device with grid division G&STÜ-5510403

Category: 207 gluespreader machines
Latest update: 05.07.2022 add to watchlist
approved
dealer
item-No.: 32008804

used

Location: Land-it

add to watchlist

AUTOMATIC EDGE BANDING machine SCM OLIMPIC K 1000 second hand machine volt. 380/50 for solid wood max. 10 mm. / PVC / veneers / melamine composed by : technical details : min. panel length mm. 120 min. panel width mm. 70 panel thickness min./max. mm.10/60 edge thickness min./max. mm.0,4/10 total installed power Hp 9 composition machine : 1. lower glue pot 2. motorized roller for automatic feeding 3. edge shear 4. end trimmer unit . motor Hp 0,3 . rpm 12.000 5. top and bottom ( rough ) edge trimmer unit . 2 motors Hp 1,1 . rpm 12.000 6. top and bottom ( fine ) bevel edge trimmer unit . 2 motors Hp 0,3 rpm 12.000 7. edge glue scraper unit integral protection enclosure

Category: 201 saws
Latest update: 02.02.2024 add to watchlist
approved
dealer
item-No.: 4960056

new

check Seller: WEIBERT maschinen
Location: Land-de

add to watchlist

Engine power: 400V 2 PS S1 Planing width 260 / 300 mm Drum: 3-Tersamesserwelle Dressing table length: 1040 mm / 1200 mm Clearance height: 3-200 mm Formatschiebetisch: 1070mm be hemline Cutting height: 80 mm Saw-45 ° 90 ° swivel Milling machine 90 ° starr Blower rpm: Speed of 4200-6300 rpm or 5000-7500 RPM G & STÜ 5500027 260mm planing width! SPECIAL PRICE NET OF 3599.- G & STÜ 5500030 300mm planing width! SPECIAL PRICE NET OF 3999,-

Category: 205 boring mills, machining centers
Latest update: 21.03.2024 add to watchlist
approved
dealer
item-No.: 5011665

used

Location: Land-it

add to watchlist

AUTOMATIC BORING machine 35 spindles SCM TOP 35 second hand machine electric movement of boring head 0° / 90° technical details : n. 35 spindles center distance between spindles mm 32 center distance between first and last spindle of the drill head mm.1088 max. stroke of boring unit mm. 140 n.02 motors Hp 3 each one operating pressure atm 6-8 weight kg.800 volt. 380/50

Category: 209 other wood working machines
Latest update: 25.04.2022 add to watchlist
approved
dealer
item-No.: 158794912

used

check Seller: WAHO Werkzeug- und Maschinenhandelsges. mbH
Location: Land-de

add to watchlist

Vertical wood milling machine (router) make SCM type T 120 CMachine -No: 1170480, built in 1980Table size: 1100 x 900 mmTable height: 850 mmvertical adjustment of the spindle: 185 mmSpindle diameter: 35 mm5 spindle speeds: 2900 - 10000 rpm.Max. Diameter of tenon cutting disc up to: 400 mmDrive power: 7.5 hpWeight approx.: 610 kgOutside dimensions approx. 1120 x 900 x 850 mmWith- mot. Roll feedused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Category: 202 milling machines / Rotating drilling millers
Latest update: 01.02.2022 add to watchlist
approved
dealer
item-No.: 118580325

used

Location: Land-it

add to watchlist

ROUTER type SCM R9

Category: 203 planing machines / Surface planing machines
Latest update: 20.09.2021 add to watchlist
approved
dealer
item-No.: 118580443

used

Location: Land-it

add to watchlist

THICKNESS PLANER type SCM S 52 SURFACE PLANER type SCM F 410 SPINDLE MOULDER type SCM T 130 NOT SEPARATE SALE second hand machines

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
SCM 3rd category level
 
RESALE used machinery 25 years online