We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Type: Jumbo KODUKO 16-500 / DF510 / SKM103-03 Capacity: 2500 kg / h Cooking time: 120 min Type: Schroder DF510 Hopper diameter: 600 mm Hopper lenght: 520 mm Power: 0.12 kW Type: Schroder SKM103 Dimension: 2500 x 3375 x 2510
used
Capacity: 3200 x 3mm Renewed control panel from Schroder (original) New encoders and recently spindles High and sharp upper blade Hydraulic automatic top clamping
used
This Schröder Fasti 145-18/075 Bending machine was manufactured in the year 2008 in Germany.
used
Automatic injector 216 needles Type: ІМАХ 420 Product width: 420 мм. Cycles: from 15 to 60 Feed max.: 60 mm. Product height: 130÷220 mm Number of needles: 216, 3 mm. Brine pressure: 0,5-4,5 bar Machine charging height: 1150 mm Compressed air min. 6 bar Voltage: 230/400 V, 50/60 Hz Connection: 14,0 kW ; 32А Rotary brine filter: DF 510 Dimensions, mm: Machine length: approx. 2200 Machine width: approx. 1350 (approx. 2200 mm with filter) Machine height: approx. 2300 Weight: 1500 kg.
used
Type: NT 620 To work with boneless meat Loading width: 620 mm Product height: 130÷220 mm Steaker head: 700 steaker needles (2 х 350) El.connection: 400/440 V, 50/60 Hz El.connection value: 8,0 kW ; 17 А Machine dimension in mm: Length: approx. 2200 Width: approx. 1250 Height: approx. 2200
used
Automatic injector 300 needles Type: ІМАХ 620 To work with boneless meat Loading width: 620 mm Cycles: from 15 to 60 Loading max.: 60 mm Product height: 130÷220 mm Needles quantity: 300 (2 х 150) , 3,0 mm. El.connection: 400/440 V, 50/60 Hz El.connection value: 16,5 kW ; 32 А Rotating brine filter Machine dimension in mm: Length: approx. 2200 mm Width: approx. 1600 mm (approx. .2800 mm with filter) Height : approx. 2300 mm
used
Edge bending machine manufactured by Hans Schroder GmbH Germany - type MAK /IV 4040 x 2.5 mm. POS 2000 Interactiv control, Windows, touch screen, color, Polish language, 2D graphics, bending simulation. Automatic setting of the bending radius depending on the material thickness. Super simple and intuitive control operation. Jaw opening 300 mm. Very large bumper departure up to 2500 mm. Pneumatic clamping of upper tools. Ball work table dimensions: 4240 x 2500 mm 7.5 kW drives. Weight 6500 kg. Full O&M documentation, diagrams. An additional set of segment tools - high sections for bending + a strip for bending small radii. The condition of the machine is excellent. We offer a full range of adjustment and repair services.
used
This machine in operation is part of a butter making line, currently it produces 5 tons/hour. It will be available in August 2024 without its control cabinet but possibility to have the refrigeration unit (group year 2020, gas R449A). Machine in excellent condition and very well maintained.
used
Brand: APV Gaulin Type: MC 120-3TPS capacity: 20.000 l/h pressure: 205 bar Stages: 2 Dimensions: 170cm x 130cm x 175cm (LxBxH) Country of Origin: Germany YOM: 1993
used
1 unbr. Homogenizer type HG 125 Homogenizer in horizontal design with direct drive by three-phase motor with height-level base frame. Standard version suitable for maximum system pressure up to 10 bar and product temperature up to max. 150°C. Technical data: Drive power: 18.5 KW three-phase motor Operating voltage: 400 V, 50 Hz, 3 phases Protection: IP 55 Speed: 3000 rpm Material of the product-contacting parts: 316 L (1.4404/1.4435) Shaft sealing: single-acting GLRD Side seals: Viton Connections: Suction side DN 80 DIN 11851 Printing page DN 65 DIN 11851 Throughput and Conveying pressure at water similar products: approx. 25 m3/h or 3 bar with star-triangle circuit in plastic housing without pre-locking with cable and plug
used
Used homogenising Brand: APV Rannie capacity: current on 6.000 l / h Engine: 37 kW Stages: 2
used
Used homogenising Brand: APV Gaulin Type: MC45-5TPS capacity: 11,600 l / h Dimensions: 215 cm x x 130 x 165 cm (Lxwxh) Country of origin: Germany YOM: Max working pressure: 345 bar Piston diameter: 54 mm Valve: Poppet valves including control panel
used
capacity: 5.000 l / h
used
Brand: APV Type: 15M capacity: 50 l / h Stages: 2 stages Max pressure: 8000 PSI (550 bar) Power: 2.2 kW (3HP)
used
Type: MC 18 - 3TPS Capacity: 5.000 l / h Max working pressure: 200 bar Motor: 55 kW Electric: 380 V / 3 phase / 50 Hz
used
APV Homogenizer LAB 100 Ball valves Technical data see also pictures: Type: 100-6 TBS Capacity: 100 LTR. / h Engine: 2.2 KW
used
Gaulin MC7 high pressure homogenizer, single stage. Capacity 4000 l/hr, 200 bar. 30kW electric motor. Piston diameter 43.44mm. very good condition.
used
We are offering a used milk homogenising, APV Gaulin MC of 7 it is in good condition and what running in a dairy up until lately. The homogeniser can be inspected near Berlin.
used
Icecream Homogenizer YOM 1996 Only used for 1 year 160l/h, 180 bar Very good condition
used
Stock# U2310 Used stainless steel two-stage piston homogenizer manufactured by Tetra Pak (Sweden) model Tetra Alex 20. Capacity up to 5000 l/h at 160 bar pressure. Number of pistons: 3. Piston diameter: 50 mm. Piston material: stainless steel. Main drive: ABB electric motor 30 kW, 400 V, 50 Hz, 1475 rpm, IP55. Hydraulic drive: 0.25 kW, 400 V, 50 Hz, 1410 rpm, IP55. Cooling water requirements: 130 l/h. Stainless steel covers included. Weight: 1355 kg.
used
Atomo 3.0, max pressure 600 bar, Flow Rate 150 l / h, two-stage homogenizing valve Suitable for various foods Demonstration device, like new The new price is around Euro 32.000
used
Homogenizer GAULIN MC 25 - 3TPS, SN.95L34613 Flow Rate: 10,000 l/h, maximum pressure: 170 bar, poppet valves 2-stage with MICRO-GAP valve for dairy products Main motor: 75 kW incl. control cabinet with automatic control Device will be completely overhauled, engine is newly stored,
used
Manufacturer: APV Gaulin Type: MC30 Capacity: 12.000 l/h Pressure: 210 bar Condition : Fully refurbished in 2018 in very good condition includes control panel with soft starter
used
The Benhil Microfix rationalises the processing and packaging of cold store butter. The machine reduces the time it takes to defrost butter, it improves the quality of the butter by creating the finest water dispersion and improves the spreadability of the butter. Microfix 8471 butter homogeniser Capacity: up to 1.400 Kgs/Hour Rotor motor power: 20 HP Feed worms motor: 3.8 HP Manual included Length: 200 cms Width: 90 cms Height: 170 cms Weight: Approx. 900 Kg Made in : Germany
WE HAVE A NUMBER OF SPARE PARTS AND TOOL BOX FOR MC 18 AND MC 30 GAULING HOMOGENISERS