used SANE KUEI Spark Erosion Machines

In the case of spark-affected smoke and vapours, there is a risk of fire development in the filter material of the extraction system. For this reason, we recommend the use of the BOFA Spark Arresort 2 in such an application. This extinguishes the sparks to the required extent and switches off the extraction system at staker temperature development. Height/with signal tower: 665/870 mm Depth: 530 mm Width: 420 mm Capacity: 850m3/h (500 cfm) Weight: 40 kg (88lbs) Power supply: 115 - 230 V VAT is shown Delivery EXW

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Control: CHARMILLES Operating hours: 171812 Technical data Working table: Length: 950 mm Width: 620 mm Max. dimensions of work piece: Length: 1260 mm Width: 690 mm Height: 360 mm Table load max.: 800 kg Longitudinal traverse (X-axis): 630 mm Cross traverse (Y-axis): 400 mm Vertical travel (Z axis): 160 mm U/V axis travel: +/-48 mm Resolution: 0.05 µm Taper-cut +/-: 30 ° Diameter of electrode wire: from: 0.05 mm up to: 0.33 mm Dielectric aggregate: Contents: 240 l Voltage 50 Hz 3x: 400 Volt Total power required: 15 kVA Machine´s weight about: 4100 kg Overall dimensions machine: Length: 2660 mm Width: 2610 mm Height: 2370 mm Various accessories: CNC control Automatic wire treading

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Technical data Working table: Length: 450 mm Width: 400 mm Max. dimensions of work piece: Length: 400 mm Width: 450 mm Height: 300 mm Table load max.: 200 kg Longitudinal traverse (X-axis): 200 mm Cross traverse (Y-axis): 300 mm Vertical travel (Z axis): 300 mm W axis: 230 mm Diameter of electrode wire: from: 0.3 mm up to: 3 mm Voltage 50 Hz 3x: 440 Volt Total power required: 4 kVA Weight total installation approx.: 850 kg Overall dimensions machine: Length: 1390 mm Width: 990 mm Height: 2080 mm

PLUNGE EDM MACHINE AEG 443 B C AXIS X-AXIS STROKE: 1000 MM Y-AXIS STROKE: 600 MM Z-AXIS STROKE: 500 MM

PLUNGE EDM MACHINE AEG ELBOMAT 333 P ALEXTA DISPLAYED X-AXIS STROKE: 414 MM Y-AXIS STROKE: 292 MM Z-AXIS STROKE: 360 MM

PLUNGE EDM MACHINE AEG ELBOMAT 402 M DISPLAYED GHIBLI X-AXIS STROKE: 290 MM Y-AXIS STROKE: 160 MM Z-AXIS STROKE: 150 MM TABLE: 550 X 400 MM MAX HEIGHT PIECES: 300 MM MAX SIZE PIECES: 750-545 MM

PLUNGE EDM MACHINE AEG ELBOMAT 944 X-AXIS STROKE: 818 MM Y-AXIS STROKE: 326 MM Z-AXIS STROKE: 305 MM

PLUNGE EDM MACHINE CDM ROVELLA MODEL: BF600 STROKE X: 600 MM STROKE Y: 400 MM STROKE Z: 350 MM CONTROL: HEIDENHAIN SUPPORT SURFACE: 800 X 550 MM TUB SIZE: 1400 X 870 X 500 MM

PLUNGE EDM MACHINE CDM ROVELLA MODEL: ZENIT P1 STROKE X: 1500 MM STROKE Y: 1000 MM STROKE Z: 500 MM C AXIS 10-POSITION TOOL CHANGER MAX ELECTRODE WEIGHT: 2,500 KG MAX. WORKPIECE WEIGHT: 12,000 KG SUPPORT SURFACE: 2000 X 1200 MM TUB SIZE: 3000 X 1500 X 1075 MM CONTROL: HEIDENHAIN MOD. 406

Control Mitsubishi-32 bit CNC Generator power 70 amps, multipulse Trajectories (X, Y, Z) 550 x 850 x 450 mm Work container (B x T x H) 800 x 1100 x 480 mm (lift container) Work table (B x T) 760 x 1000 mm Carrying capacity 2,000 kg Electrode changer 20-fold pick-up plate magazine Accessories-CO2 fire extinguishing system -integr. Cartridge filtration system Status outdated Warranty- Price on request

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Operating hours: 12000 Technical data Working table: Length: 680 mm Width: 450 mm Max. dimensions of work piece: Length: 1000 mm Width: 550 mm Height: 220 mm Table load max.: 750 kg Longitudinal traverse (X-axis): 350 mm Cross traverse (Y-axis): 220 mm Vertical travel (Z axis): 220 mm Taper-cut +/-: 30 ° Diameter of electrode wire: from: 0.33 mm up to: 0.10 mm Max. cutting speed with wire 0.33 mm: 400 mm2/min Total power required: 10 kVA Dielectric aggregate: Contents: 760 l Air connect: 6 - 7 bar Voltage 50 Hz 3x: 400 Volt Total power required: 12 kVA Weight total installation approx.: 2100 kg Overall dimensions machine: Length: 2050 mm Width: 2020 mm Height: 2000 mm Various accessories: Cooling unit for fluttines

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Control: FANUC Series 16-W Technical data Max. dimensions of work piece: Length: 650 mm Width: 420 mm Height: 160 mm Table load max.: 250 kg Longitudinal traverse (X-axis): 320 mm Cross traverse (Y-axis): 110 mm Vertical travel (Z axis): 180 mm U axis: 120 mm V-axis: 120 mm Rapid traverse:: 900 / 450 mm/min Total volume of dielektric: 260 l Voltage 50 Hz 3x: 400 Volt Total power required: 11 kVA Machine´s weight about: 1500 kg Overall dimensions machine: Length: 1800 mm Width: 1600 mm Height: 2000 mm

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A Positions ATC: 0   Tank contents: 0   CNC Brand: 0 CNC Model: 0 Control: CHARMILLES Technical data Table length: 800 mm Table width: 560 mm Table load max.: 800 kg Longitudinal traverse (X-axis): 450 mm Cross traverse (Y-axis): 320 mm Max. distance from the table and sleeve: 640 mm Working vessel:length inside: 1195 mm Width: 800 mm Height: 410 mm Working head: way rapid feed (Z): 410 mm Dielectric aggregate: Contents: 560 l Height: 870 mm Width: 2110 mm depth: 750 mm net weight: 300 kp Generator: Power: 128 A Height: 2100 mm Width: 650 mm depth: 600 mm Total power required: 7.0 kVA Operating voltage: 380 Volt Machine´s weight about: 320 kg Machine´s weight about: 4100 kg Overall dimensions machine: Length: 3700 mm Width: 2110 mm Height: 2700 mm

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A Positions ATC: 0   Tank contents: 0   CNC Brand: 0 CNC Model: 0 Control: CHARMILLES Technical data Table length: 500 mm Table width: 400 mm Table load max.: 500 kg Longitudinal traverse (X-axis): 350 mm Cross traverse (Y-axis): 250 mm Max. distance from the table and sleeve: 150/450 mm Working vessel:length inside: 800 mm Width: 550 mm Height: 370 mm Working head: way rapid feed (Z): 300 mm max. electrode weight: 50 kg Dielectric aggregate: Contents: 410 l Generator: Power: 64 A Total power required: 7.5 kVA Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 2500 kg Overall dimensions machine: Length: 1900 mm Width: 1690 mm Height: 2800 mm

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A Positions ATC: 0   Tank contents: 0   CNC Brand: 0 CNC Model: 0 Control: CHARMILLES Technical data Table length: 750 mm Table width: 600 mm Dimension of the workpice: Length: 1200 mm Width: 850 mm Height: 400 mm Table load max.: 1600 kg Longitudinal traverse (X-axis): 600 mm Cross traverse (Y-axis): 400 mm Height adjustment (Z-axis): 450 mm max. electrode weight: 100 kg Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 4500 kg Overall dimensions machine: Length: 3150 mm Width: 2750 mm Height: 2960 mm

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A Positions ATC: 0   Tank contents: 0   CNC Brand: 0 CNC Model: 0 Technical data Table length: 500 mm Table width: 400 mm Number of spline: 3 T-channel width: 12 mm Distance of the T-slots: 125 mm Table load max.: 500 kg Longitudinal traverse (X-axis): 350 mm Cross traverse (Y-axis): 250 mm Height adjustment (Z-axis): 300 mm Working vessel:length inside: 800 mm Width: 550 mm Height: 370 mm Dielectric aggregate: Contents: 450 l Total power required: 5 kVA Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 2500 kg Overall dimensions machine: Length: 3300 mm Width: 2400 mm Height: 2480 mm Various accessories: Loading roboter: Type: QCRi Pallet positions: 8 Holder: 54 Fire extinguishing system (without bottle) Interface serial port RS 232 Lamp

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Technical data Max. dimensions of work piece: Length: 900 mm Width: 520 mm Height: 270 mm Table load max.: 500 kg Longitudinal traverse (X-axis): 320 mm Cross traverse (Y-axis): 220 mm Vertical travel (Z axis): 270 mm Taper-cut +/-: 30 ° Diameter of electrode wire: from: 0.25 mm up to: 0.30 mm Overall dimensions machine: Length: 3400 mm Width: 2400 mm Height: 2300 mm

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Technical data Working table: Length: 900 mm Width: 600 mm Max. dimensions of work piece: Length: 1200 mm Width: 700 mm Height: 400 mm Table load max.: 1500 kg Longitudinal traverse (X-axis): 550 mm Cross traverse (Y-axis): 350 mm Vertical travel (Z axis): 400 mm Taper-cut +/-: 30 /400mm ° Diameter of electrode wire: from: 0.33 mm up to: 0.10 mm Dielectric aggregate: Contents: 1200 l Air connect: 6 - 7 bar Voltage 50 Hz 3x: 400 Volt Total power required: 10 kVA Weight total installation approx.: 2850 kg Overall dimensions machine: Length: 2810 mm Width: 2600 mm Height: 2080 mm Various accessories: Cooling unit for fluttines: HITEMA

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Control: CHARMILLES Technical data Working table: Length: 560 mm Width: 440 mm Max. dimensions of work piece: Length: 1130 mm Width: 510 mm Height: 260 mm Table load max.: 500 kg Longitudinal traverse (X-axis): 318 mm Cross traverse (Y-axis): 218 mm Vertical travel (Z axis): 114 mm U axis: +/-48 mm V-axis: +/-48 mm U/V axis travel: 48 mm Taper-cut +/-: 30/65mm ° Diameter of electrode wire: from: 0.1 mm up to: 0.25 mm Forward feed for wire elctrode: from: 0.2 m/min up to: 15 m/min Max. coil weigth: 16 kg Dielectric aggregate: Empty weight: 4400 kg Contents: 240 l Generator: Cut capacity max. from: 300 mm2/min Voltage 50 Hz 3x: 380 Volt Total power required: 12 kVA Weight total installation approx.: 4500 kg Overall dimensions machine: Length: 3700 mm Width: 2600 mm Height: 2300 mm Variou ...

AGIE AGIETRON 100 C Tool Change 16 positions Control on axes + axis C

AGIE AGIETRON 200 C Dimension table 800 x 630 mm working tank (internal size) 1070 x 740 x H. 420 mm Max size piece 1000 x 700 x H. 320 mm Axis X 500 mm | Y 350 mm | Z 500 mm Rapid speeds 720 mm

Spark Erosion Machine AGIE AGIETRON 250C used machine in excellent condition tool change 24 positions

Key data: 350 _Unknown / Other, 250 Sodick, 220

Longitudinal X: 350 mm Cross Y: 250 mm Vertical Z: 220 mm Ampere: 0 A CNC Brand: _Unknown / Other CNC Model: Sodick Make: Sodick Type: A325 Mark25 Control: Sodick MARK 25 YOP: 1998 U Axis 80 mm V Axis 80 mm X-Axis:                 350mm Y-Axis:                 250mm Z-Axis:                 220mm Table size L x W / or ø:600 x 400 mm Table load:             450Kg Length:                 2.250 mm  Width:                  2.450 mm  Height:                 2.400 mm  Weight:                 3.000 kg 

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A MACH-id     4003 MAKE         Charmilles TYPE           ROBOFORM 200 YEAR          1990 DIMENSIONS Length    3000 mm Width     1600 mm Height    2500 mm

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A Positions ATC: 0   Tank contents: 0   MACH-id   4000 MERK    CHarmilles TYPE      Roboform 31 YEAR      1996