Multi purpose edge grinding machine for very many grinding can be
The Kündig uniq is the ultimate of all edge grinding machines
Grinding width 200mm
Grinding height approx. 195 mm solid page and approximately 120 mm
both sides use solid loops and veneer sanding side
Electric belt oscillation, steady oscillation of the entire grinding
unit, no compressed air connection required
The oscillation stroke is adjustable via potentiometer drive motor
pole shift bar 380V / 3kW
Two tape speeds
for the depositing of cream, jam and other sandwich mixes\r\ncap.
adjustable max. 22 strokes/min. \r\nworking width max. 600 mm,
\r\naccessories: \r\n-1 depositing with straight device, 6
rows\r\n-chain with plastic holder 600 x 110 mm on this can be put\r\n
biscuits in 6 rows for depositing cream on\r\n
Maximum drilling diameter, mm 50
Departure of the spindle from the column, mm
- maximum 1600
- least 375
Distance from spindle nose to plate,mm
- the largest 1600
- least 450
Number of spindle speeds 21
Spindle speed limits, mm / Rev 20...Two thousand
Number of spindle feeds 12
Limits of spindle feed, mm / about 0.056...2,5
- Diameter, mm 31,5
The greatest course of a sleeve on a column, mm 750
Speed of vertical movement, m / min 1.4
Spindle stroke,mm ...
Sand blasting and injector cabin RA 40/40
The sand blasting Cabinet lacking in control, because the battery by
longer stand has unloaded Simens S5 software.
The cabin was not used almost, the cabin shows no signs of wear. The
cabin was bought by a company that wanted to make series parts, but it
used then but custom-designed cabins, and so the cabin stood still
New price: â?¬30000
Workspace Lxwxh: 1010x1010x760mm
KabinenmaÃ?e Lxwxh: 1950x1090x1820mm
Door dimens ...
The machine is designed for eco-friendly removal of paints and
contaminants using a spray of baking soda in various granulations.
Possibility to use other cleaners - glass, corundum, sand, etc. From
the smallest grain granulation (baking soda) to the thickest 2-3 mm.
Smooth regulation of cleaning power, with surface smooth and rough,
without damage. Waste throws dry and in water-free modes,
hydrodynamically and in a water mix. Round nozzles from size # 3 to #
4 and flat nozzles are possible. Construction of a carbo ...
Weight approx.: 300 kg table length: 1100 mm table width: 300 mm
Dimensions (l x w x h) approx.: 1300x800x1300 mm grinding band
dimension: 150 x 2280 mm Description: Grinding width 150 mm, table
size 1000 x 300 mm with built-in exhauster
Fiamma Forni Biscuit line
Hard & Soft Biscuit line.
- YOM 1996 but complete rebuilt in 2010 .
- 1000 mm working width.
- For all kind of biscuits, also filled and wire cut biscuits
- Part 1: Sugar mill plant
- with Cristall sugar Tank in Inox and integraded
double scew conveyor
- Double screw conveyor connected with
Sugar mill for Powder sugar
- connected with Powder sugar cyclon tank and
- connected with suction station on the plattform
over the Mixer
- with pl ...
Weight approx.: 400 kg Dimensions (l x w x h) approx.: 4500x2000x1600
mm Description: Technical description: ? for sanding of primed
windows ? Suitable for waterborne and solvent-based primers ?
Machining of 2 different wood thicknesses possible ? Processing of
double-wingend windows with attached blow bar possible Technical
Details: ? max. working length 2500 mm ? 2 x 3-phase motors a 0,37
kW ? 1 feed motor 0,37 kW ? compressed air requirements 6 bar ? air
consumption 50 l/min. ? Processing sequence on SPS c ...
Vertical belt sanding machine VBZ 250 Zimmermann with much
This vertical belt Sander is specially designed for the model-making
and mould making. For precise grinding of large areas. All settings
with clamp lever and fine adjustment.
Power 400V / 4kW
grated machine table approx. 750 x 350 mm with removable table insert
Table can be electrically to approx. 30 degrees upward and 45 degree
Position control with electric angle indicator and quick adjustment
and fine adjustment
serial number: 9004112 Weight approx.: 4300 kg working width: 1300 mm
Dimensions (l x w x h) approx.: 2470 x 2265 x 1770 mm grinding band
dimension: ca./approx. 4900 x 150 mm & 2620 x 1350 mm unit 1: Quer /
Cross unit 2: Längs / Length unit 3: Bürste / Brush hollow height: 3
- 140 mm total power approx: 48 KW Description: Heesemann cross
sanding machine with two sanding units cross- and longitudinal produce
and one brush.
Oscillating curve grinding machine OZS of Carpenter with much
This roller grinder is specifically designed for the construction of
the model. Heavy rigid machine for wood, plastic and light metal can
Power 400V / 1.4 / 1, 85kW, two speeds
Direction of rotation either left - right reversible
Two spindle speeds 1400 and 2800 RPM
Aggregate single-sided to 20 degree swivel and other side to 30
Aggregate with reciprocating engine (oscillation)
Table size approx. 500 x 500 mm
Plate grinding machine FZ Zimmermann
This Disc Grinder is specifically designed for the construction of the
Motor 400V / 0, 37kW
Direction of rotation either left - right reversible, thus optimal use
Speed approx. 1380 RPM
Disc diameter 300 mm
grated machine table approx. 400 x 160 mm
Cast iron table 45 degrees after top and bottom swivel
Table can be folded down to the slight change of grinding wheel
according to Katy
Protractor with angle Guide
additional tabl ...