We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Cutting thickness Steel: 6mm; Stainless steel cutting thickness: 4mm; Cutting thickness Aluminum: 8mm; Cadence Angle Min: (cps/min) 80; Programmable backgauge stroke: 1000mm; Backgauge speed: 200mm/sec; EQUIPMENT: *CNC controlling the clearance between blades and the cutting angle by programming the thickness and grade of the sheet metal *Support of thin sheets; Hybrid machine 22 liters of oil
used
Capacity 3050 x 6mm Touch screen control Electrically adjustable backgauge and cutting gap High support table at the rear with return to sender Small parts are ejected at the front
used
Capacity 3100 x 8 mm Equipped with newer touch controls Adjustable backgauge, cutting angle and cutting clearance Elevated table at the rear
used
Capacity 3100 x 6mm Elevated table at the rear Walk-in protection Return to sender Scrap bin option at the front Machine has just arrived, more photos and information on request
used
Key data: 13
Sheet thickness: 13,00 mm Sheet width: 3100 mm Depth rear gauge: 0 mm Maximum sheet thickness: 13mm Max. cutting length: 3.100mm Strokes on full length: 18mm Strokes in short 1000 length:46 Cutting angle: 0,5 - 3 ° Length backgauge: 0 - 1250 mm Number of down holders: 20 Approach speed: 125mm/sec. Control: TS 200 Power: 30 kW Length: 4.800 mm Width: 4.800 mm  ...
used
Key data: 13
Sheet thickness: 13,00 mm Sheet width: 3100 mm Depth rear gauge: 0 mm equipped with Return to Sender equipped with Sorting system Maximum sheet thickness: 13mm Max. cutting length: 3.100mm Strokes on full length: 18mm Strokes in short 1000 length:46 Cutting angle: 0,5 - 3 ° Length backgauge: 0 - 1250 mm Number of down holders: 20 Approach speed: 125mm/sec. Control: TS 200 Sheetsupport: yes Safety guides: yes Power: &n ...
used
Sheet thickness: 6,00 mm Sheet width: 2050 mm Depth rear gauge: 1000 mm Make Safan 6 mm Type VS 205 x 6 Year 1988 Safan hydraulische knipschaar Sheet thickness (mm) T = 6 mm Sheet width (mm) L = 2.050 mm Depth rear gauge (mm) D = 1.000 mm Electr. backgauge 1 set extra spare blades Sheet support arms
used
Sheet thickness: 10,00 mm Sheet width: 3100 mm Depth rear gauge: 1000 mm
used
sheet width: 3000 mm plate thickness: 3 mm distance between columns: / mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
digital readout for backgauge Cutting length: 3100 x 6 mm Backgauge: 1000 mm Adjustable cuttingedge: 0,5° - 2° Electric motor (power): 11 kW Length: 3574 mm Depth: 1550 mm Height: 1620 mm Weight: 6 ton
Safan HVS 2050 x 16 mm Cutting length: 2050 mm Max sheet thickness st 45: 16 mm Backgauge: 1250 mm Adjustable cuttingedge: 0,5 > 4° Electric motor (power): 18,5 kW Length: 3100 mm Depth: 2530 mm Height: 2000 mm Weight: 9 ton Number of sheet holders: 11x
used
Hydraulic sheet metal cutting guillotine from Safan Netherlands type VS306, 3100 mm x 6 mm (ST40). The machine has a variable inter-knife gap, and a hydraulically variable knife angle of 0,5 -2 deg. 11 kW motor. The weight of the machine is 6,3 t. The machine is fast. Departure of the bumper 1050 mm. Electrically adjustable cutting length in the range of 10-3100 mm. 2 supports for supporting sheet metal at the front of the machine, gauge of 2500 mm, for cutting at an angle of 90 degrees. Light dash for cutting along the line. Original DTR documentation and safety instructions in Polish.
used
Hydraulic guillotine for cutting sheet metal by Safan the Netherlands, type VS 255-10, 2550 mm x 10 mm (ST40). The machine has a quickly changing knife gap with thickness reading, and a hydraulically variable knife angle of 0.5 -2 degrees. 11 kW motor. Machine weight 8.2 tons. NC electric bumper with position transmitter with readout, bumper travel 1050 mm. Electrically adjustable cutting length in the range of 30-2550 mm. 2 x supports for holding sheets of metal at the front of the machine, plus a 1500 mm ruler for cutting at an angle of 90 degrees. Light line enabling line cutting. The knives are sharp, the machine cuts copier paper. Original DTR documentation
used
Hydraulic guillotine for cutting sheet metal by Safan the Netherlands, type VS 310-3, 3100 mm x 3 mm (ST40). The machine has a quickly changing knife gap with thickness reading, and a hydraulically variable knife angle of 0.5 -2 degrees. 5.5 kW motor. The weight of the machine is 4.2 tons. The machine is fast and the number of cuts is equal to that of mechanical ones. CNC electric bumpers with a position transmitter with readout, bumper travel 1050 mm. Electrically adjustable cutting length in the range of 75-3100 mm. A system for magnetically supporting large sheets of metal while cutting at the rear of the machine. Support 2000 mm angle bracket, to support sheet metal at the front of the machine. Light line enabling line cutting. Original DTR documentation.
used
Hydraulic guillotine for cutting sheet metal by Safan the Netherlands, type VS 16-310, 3100 mm x 16 mm (ST40) The machine has a quickly changing gap between the knives with thickness reading, and a hydraulically variable knife angle of 0.5 -3 degrees. 21 pieces of sheet metal holders. 18.5 kW engine. Weight 12.5 t. CNC bumpers with reading and setting device, bumper travel up to 1200 mm. 2 supports to hold sheets of metal at the front of the machine, and a ruler for cutting at a 90-degree angle. Light line on the material, lighting, central lubrication. electronic cutting length adjustment 10-3100 mm. Single or continuous cutting with adjustable intervals between strokes. Very fast guillotine. Knives 90% new, cutting material from 0.5 to 16 mm. Original OHS documentation and occupational health and safety manual in Polish.
used
Sale guillotine shears (guillotine) Safan B-Shear 310-6 2013 release in excellent condition, there are all documents on diagnostics and maintenance work performed. Running hours 12 674
used
Capacity 3100 x 8mm TS200 touch screen control Adjustable cutting angle and backgauge Pneumatic high support table
used
Hydraulic sheet metal cutting guillotine from Safan Netherlands type HVR 6-310, 3100 mm x 6 mm (ST40), rb. 1999. The machine is fully CNC controlled by Safan. The machine has a variable inter-knife gap, and a hydraulically variable knife angle of 0,5 -2 st, set after entering the thickness and hardness of the material. 11 kW motor. The weight of the machine is 6.3 t. The machine is b. fast, the number of cuts is equal to mechanical. Electric bumpers with reading, bumper departure 1050 mm. Electrically adjustable cutting length in the range of 10-3100 mm. 3 supports to support sheets at the front of the machine, plus a gauge of 2500 mm, for cutting at 90 degrees. Light dash for cutting along a line. Original DTR documentation and safety instructions in Polish. Riding table at the rear of the machine. Protection of the working space with infrared. The machine structurally adapted ...
used
Sheet thickness: 6,00 mm void: 0 Table length: 0 mm Table width: 0 mm Knife length: 3100 mm MACH-id 5481 MAKE Safan TYPE HVR 310-6 YOP 1994 SPECIFICATIONS Maximum sheet thickness 6 mm Max. cutting length 3100 mm Strokes on full length 45 mm Strokes in short 1000 length 90 Cutting angle 0.5 - 2 ° Length backgauge 1000 mm Number off down holders 17b Approach speed 125 mm/sec. Operated mechanical or hydraulic Hydraulic Power 11 kW DIMENSIONS Length   ...
used
Cutting bench cutting scissors sheet metal shears Type: Hydraulic Manufacturer: Safan Type: HVR 850-8 Year of construction: 1997 Refurbished: 2021 (also new knives) Steering: Conventional Electrical stop Cutting width: 8500mm Cutting thickness: 8mm Backgauge: 1000mm Motor power: 15 kW Incl. documentation Machine dimensions for transport: 9530x2750x2955mm + extra parts Machine goes 550mm into the floor, but it can also be mounted on beams (see drawings) Machine weight: 55000kg
used
Sheet thickness: 8,00 mm void: 0 Table length: 2100 mm Table width: 0 mm Knife length: 2100 mm Maximum sheet thickness: 8mm Max. cutting length: 2.100mm Strokes on full length: 34mm Cutting angle: 1,30 ° Length backgauge: 1.000mm Number of down holders: 13 Control: Touchscreen Operated mechanical or hydraulic:Hydraulic Power: 15kW Length: 2.680 mm Width:& ...
used
Sheet thickness: 6,00 mm void: 3100 Table length: 0 mm Table width: 0 mm Knife length: 0 mm MACH-id 3505 MAKE Safan Darley Holland TYPE B Schear YEAR 2007 SPECIFICATIONS Controll CNC Touchscreen Guillotine / Lazer / Cutting table Guillotine Cutting lenght 3100 mm Maximum sheet thickness 6 mm Backgauge stroke X in mm1000 mm DIMENSIONS Length 3800 mm Width 2200 mm Height 2100 mm
used
Description heavy automatic hydraulic plate shears / guillotine shears up to 50mm with cycle feed Working width approx. 155cm Thickness max. 50mm
used
Stop for press brake, cant bench, guillotine shears ... -Manufacturer: Safan, stop for guillotine shears type VS 255-4 -Stop length: 2500 mm -Motor: ICME 0.18kW -Clamping angle: 2 pieces -Individual components: dimensions see photos -Transport dimension: 2500/1040/H220 mm -Weight 324 kg
used
Inv. Num. : 4970 Type: VS 310-6 Producer: Safan Created: 1981 Parameters: Maximum cutting length: 3100 mm Maximum sheet thickness when cutting: 6 mm Maximum cutting angle: 2 h Oil tank capacity: 150 l Total power requirement: 11 kW Back gauge: 1000 mm Machine weight: 6200 kg