We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
X - axis: 6000 mm Y - axis: 3200 mm CNC Brand: Digisaf CNC Model: 3.5 MACH-id 338 MAKE SAF Air Liquide TYPE PLASMATOME 25 YEAR 1998 SPECIFICATIONS Controll DIGISAF 3.5 Guillotine / Lazer / Cutting table Plasma cutting table Cutting lenght Stroke torch = 200 mm Maximum sheet thickness 0 - 20 mm Working area Length x Width 6000 x 3200 m Laser / Plasma / Gas cutting plasma mm CNC Saf Plasmatome 25 cutting table
used
SAF OPTITOME 15 CNC plasma cutting machine was built in France in 2003. The machine is used to cut shapes in workpieces made of stainless steel, mild steel or aluminium. Depending on the previously choiceed nozzle, workpieces can have a thickness from 2 or 3 mm up to 18 mm. The high cutting quality is achieved thanks to the use of a lightweight and rigid transverse beam with efficient drive, mounted on an extremely rigid and robust machine frame. The installed working table with dimensions (L x W) of 3000 x 1500 mm allows the reduction of mechanical stresses arising during thermal cutting or sheet loading/unloading. The plasma cutting machine is supplied with equipment consisting of among others: a NERTAJET HP 125 plasma source with a power of 125 A and a DIGISAF 100 CNC control. Technical data of the SAF OPTITOME 15 plasma - materials to be cut: stainless steel, mild steel, alumi ...
used
SAF PLASMATOME 25 plasma cutting machine was built in 2000 in France. The machine, characterised by its rigid and robust design, is designed for precision cutting of sheet metal with a thickness of up to 45 mm. Thanks to the use of double drives on the longitudinal axis, high working speeds are obtained, which result in high quality and accuracy of machining. Workpieces are machined under a water sheet on a large work table measuring (L x W) 6000 mm x 2000 mm, using a cutting head powered by a powerful KJELLBERG PA-S45 W plasma source. The SAF AIR LIQUIDE PLASMATOME 25 plasma cutting machine is controlled by a control panel equipped with a multi-tasking CNC controller DIGISAF, allowing full control of the machine operation. Technical specifications of the SAF PLASMATOME 25 plasma cutting machine - CNC controller: DIGISAF - plasma source: KJELLBERG PA-S45 W - work table surface a ...
used
Description: plasma cutting system possible welding processes: plasma cutting with standard gases plasma cutting with oxygen (fine cutting technique) -autogen-burning cutting cutting speed: per sheet metal base up to 8m/min cutting length (x-axis):4300mm cutting width (y-axis):2100mm cutting thickness for plasma cutting: -for stainless steel=max.130mm;for normal steel (liquid steel)=max.40mm -for light metals/ Alloys=max.150mm burner adjustment distance: 250mm Plasma power source: 1. Nertajet 320-640 (2x parallel) Insulation class H; Protection class IP 23; 30Hz 2. Nertajet 120H-Autonom Road dimensions: 6400x400x550mm cutting table Ground: 4500x2600x670mm Equipment: Smoke extraction via suction table Smoke disposal by filter system Cooling of Et Scheid IK-V 18 Plasma cutting torch Autogen cutting torch roadway (rail) length 6400mm cutting table length 4500mm To ...
used
Plasma cutting system with possible welding processes: plasma cutting, firing joints; TIG (TIG) on all metals and alloys; MIG on light metals and alloys and heavy metals and arc welding Source: Nertajet HP 120 (220V,24V,380V,415V,440V,500V) Multiple frequencies 50/60Hz burner: CPM 250 (flat electrode) cutting process under water Plasma cutting cutting speed approx. 8m/min. Marking via compressed air driven drills Equipment: rails; Control cabinet; Cutting portal; Tub; Burning pads; 1x Torch Machine dimensions: cutting system: L:4,40xB:2,30xH:1,80m Cutting tables: L:8,44xB:3,31xH:0,85m 2 pcs. Plasma generator connected in parallel Nertajet HP 120: L:0,83xB:0,65xH:1.3 3m Track 1: L:10,650xB:0,25xH:0,92m Left Side Track 2: L:10,650xB:0.25xH:0.57m Right Side Factory conditions:L:3,120xB:1,36xH:0,14m (5 pcs. for cutting table) Water tank: D=1100mm H=2000mm / 1 pc. storage pl ...
used
; operational as of week 33
used
Manufacturer: SAF Type: Oxytome 30 Working range: 6000 x 3000 mm Technology: Plasma oxyfuel Built: 2001 Equipment Hardware: 1x SAF Nertajet HP 125 Only very little use 2x SAF Nertajet HP 300 connected in series 1x autogen burner Without fuel cutting tables without filter system Div. Wear parts equipment Control & Software: DIGISAF 500 Machine control Other information: System is available from week 33 cutting performance see PDF assembly and commissioning on request; ready for use from KW 33
used
; available as of week 20/2014
used
SAF Type: Multitome PMD Working area: 5000 x 2000 mm Technology: Plasma-Autogen Year : 12 / 1994 Equipment Hardware: SAF ZIP 5.0 (45A - 150A)(built year 12 / 2000) 1x autogen burner (interchangeable on same support) Without filter system Wear parts Equipment Control & Software: SAF Machine Control (NC System) system is available from KW 20 / 2014 assembly and commissioning on request; available from KW 20 / 2014
used
; ready for immediate use
used
; ready for immediate use
used
Working range : 2500mm x 6000mm 1 x Autogen 1 x Plasma 1 x Drilling unit HP Digital Process Control Plasma Source: Nertajet HP 125 Machine burner OCP 150 Without table and suction Option: suction table and filter unit assembly and commissioning on request; ready to use
used
; ready for immediate use
used
cutting range for steel to:20 mm total power requirement:3~ 220 / 380 V weight of the machine ca.:100 kg dimensions of the machine ca.:500 x 750 x 1000 mm
used
Control digisaf 2.5. Cutting range 6000x2000mm, cutting table is smaller. Including many cutting accessories. excluding filter and excluding gas bottles. Machine dismantled for transport
used
working length: 8000 mm working width: 3500 mm Power: 300 A Plasma source: Nertajet type: HP 300 CNC burner heads: 1 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Plasma cutting table Brand: SAF / Airliquide / Oerlikon Model: Plasmatome 20 Useful cutting capacity: 2000x6mm * It has rails to expand the cutting length from 6000mm to 8000mm AZURMATIC Aspiration Table of 2000x6000mm (2 modules of 2000x3000mm) CNC: BURNY 3.5 DIGISAF * Complete CNC manual available. Includes computer with the Lantek CadCam and the license backpack. Plasma generator: - Brand: Nertajet - Model: HP120 - Torch: OCP 150 - Cutting capacity: Carbon Steel: 15mm Stainless Steel: 15mm Aluminum: 20mm Equipment description: - It has height control - Double motorization in the portico - Movement speed: 10m / min
used
current intensivity: 20.5 A, weight approx.: 75 kg, Approx. Onsite Dimension. (l x w x h): 600 x 500 x 800 mm
used
Maximum turnerable diameter: 1040 mm Turning diameter above the wagon: 620 mm Maximum workable length: 5200 mm Spindle power: 40 kW CNC ECS Optical line measurement system Maximum flow between tips: 10 tons Machine complete with chip evacuator, 4-position hydraulic turret, safety shelters in compliance and spindle 3-jaw hydraulic self-centering AUTOBLOCK; Various accessories available (tool case, stretchers, lunettes...) EC 2018 remarking possibility
used
Main technical data: Center height: 560 mm Distance between centers: 5000 mm Bar passage: 105 mm The lathe is in good condition, being cleaned and visible at Ns. site.
used
1 saf - 3-roller bending machine model DS 60 HV Basic version with hydraulic infeed of the upper roller, including a set of standard rollers, TIR tie rod to connect the shafts for maximum power, RCD straightener on the right side for angle iron, new replacement shaft. This machine is workshop overhauled and ready for immediate use in top condition. You are welcome to visit and test this machine with us.
Ladies and gentlemen, Below we can offer: Manufacturer: Make: 1 piece used continuous furnace, make: Safed Type: 11Bd40/24 Built: 2005 max. working temperature: 1100C Heating capacity: 60 kW Dimensions Length: 15,000 mm Usable width: 340 mm Useful height: 150 mm Heating chamber length: 2,380 mm Muffle, cooling channel new Prices and pictures on request All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We accept no liability for used material. Warranty e ...
used
Force of pressure: 150 t working width: 4300 mm clear stand width: 3600 mm stand projection: 300 mm maximum height: approx. 500/700 mm operating speed: up / down 41 - 65/10 mm / sec back gauge: 1000 mm Electr. Supply: 400 V, approx. 15 kVA kW weight: 14 t space: 4600 x 1950 x 3100 mm
used
Metal detector without tape If you have any questions: 01718367957
used
Sheet thickness: 6,00 mm void: 0 Table length: 0 mm Table width: 0 mm Knife length: 3100 mm MACH-id 5481 MAKE Safan TYPE HVR 310-6 YOP 1994 SPECIFICATIONS Maximum sheet thickness 6 mm Max. cutting length 3100 mm Strokes on full length 45 mm Strokes in short 1000 length 90 Cutting angle 0.5 - 2 ° Length backgauge 1000 mm Number off down holders 17b Approach speed 125 mm/sec. Operated mechanical or hydraulic Hydraulic Power 11 kW DIMENSIONS Length   ...