We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Chuck size: Ø 330 mm -Tensioning force: max. 1500 daN -Thread: M16 -Weight: 83 kg
used
4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Chuck size: Ø 330 mm -Tensioning force: max. 1500 daN -Shot: short taper 8 -Weight: 79 kg
used
4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Clamping force: max. 90 KN -Equipment: short taper 6 (106 mm) -Chuck size: Ø 210 mm -Weight: 22 kg
used
Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic test pump -Hydraulic unit for: power chucks -Hydraulic pump type: 500/510/H670 mm -Pump max. Pressure: 30 bar -Pump max. Liter output: l/min -1x drive: 0.75 kW 1380 rpm -Hydraulic filter -Hydraulic tank -Control valve -Dimensions: 500/510/H670 mm -Weight: 88 kg
used
Wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -clamping force: max. 1800 kp -with: interchangeable jaws -Chuck size: Ø 140 mm -short taper -Transport dimensions: 200/200/H150 mm -Weight: 12.1 kg
used
Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic test pump -Hydraulic unit for: power chucks -Hydraulic pump type: B1A8E -Pump max. Pressure: 80 bar -Pump max. Liter output: 12 l/min -1x drive: 1.1 kW 1400 rpm -Hydraulic filter -Hydraulic tank -Dimensions: 500/410/H670 mm -Weight: 100 kg
new
Four-jaw lining ø 500 mm very good condition Spindle holder with base baking and top baking
used
Turning chuck RÖHM Diameter 160 mm 3- Baking max. 3600 rpm as good as new !
used
very good three-jaw chuck centrically exciting øA= 315 mm ø I= 100 mm cylindrical receptacle Chuck flange DIN 55027 on request incl. as good as new drill jaws Swivel jaws on request Forwarding or pick-up
used
As good as new reversible base jaws Insert: Three-jaw chuck of parallel toothing, Manufacturers, for example: SCHUNK; SMW Autoblock Power chuck on request? Designation of the base jaws GBK-500; GBK500 (SMW-Autoblok-SCHUNK, BERG) for the construction of commercially available reversible, interchangeable jaws Three-jaw wedge rod chuck ø 500mm: KNCS 500 manual chuck; THW500 B= width; H height; L= Length; S=N_backe; N= cross groove for interchangeable jaws; La=hole spacing; Za = tooth spacing; S= Groove (top jaw) base jaw W = 45 mm H = 57 mm L = 160 mm N = 30mm S = 18mm La= 60mm Thread M16 x 1.5 Weight approx. 9-10 Kg /set Price on request:
used
As good as new reversible base jaws Insert: Three-jaw chuck, helical toothing, Manufacturer for example: FORKARDT,RÖHM ,SCHUNK;,SMW-Autoblock Power chuck type on request? Designation of the base jaws FGB-630; FGB630 (FORKARDT) for the construction of commercially available, reversible, hard top jaws Three-jaw wedge rod chuck ø 6300mm: Hand chuck F630, Duro630; THW630 B= width; H height; L= Length; S=N_backe; N= cross groove for interchangeable jaws; La=hole spacing; Za = tooth spacing; S= Groove (top jaw) base jaw W = 65 mm H = 62 mm L = 230 mm N = xx mm S = 24mm La= 82mm Thread M20 Weight approx. 8-10 Kg /piece Price on request:
used
Turned chuck, power chuck RÖHM type KFD-HF 315/3 ident. Nr: 411193 diameter 315 mm Turning chuck holder short cone DIN 55027 size 8 with 4 mounting holes M16 Operating force max 7000 daN Speed max. 4500 rpm. Jaw holder 90 Pointed toothing 1/16 Groove width jaw holder 21 mm Total jaw width Pointed toothing with groove 49.5 mm Connection thread Tension tube M90 x 2 mm Central bore 85 mm- Turned chuck holder screwed to chuck, short cone DIN 55027 Size 8 (cone diameter approx. 139 mm) - Tension tube with connection thread M90 x 2 mm, length 815 mm, outside 81 mm, inside 70 mm Weight of lathe chuck: 65 kg Weight of drawbar: 10 kg good condition; used
used
Power chuck, 3-jaw chuck, three-jaw chuck, wedge hook chuck RÖHM KFD-200/3HS 143888 outer diameter: Ø 200 mm Height without jaws: 110 mm Passage: Ø 66 mm Speed: max. 6500 rpm Flange diameter: Ø 200 / 170 mm bolt circle diameter: Ø 134 mm 3x screw M12 x 1.75 jaws individually adjustable by toothing ! with accessories ! New ! Dimensions ( lathe chuck ): 200 x 200 x 110 mm Dimensions ( packaging ): 230 x 230 x 240 mm
used
RÖHM KFD-1000/3 3/32 Power chuck - unused/brand new Year of construction: 2019 Power chuck RÖHM KFD-1000/3 3/32 ZA520 M30 OD KH42 BH15,2 Item No.: 84662091 Country of origin: Germany H-solid chip cylinder OVS-200 SV 4,500 RPM STROKE 50 Item No.: 84662091 EAN-No.: 4019208232577 Country of origin: Germany Stroke control KP F90 OVS-200 Item No.: 84662091 EAN-No.: 4019208235059 Country of origin: Germany All other accessories shown in the photo are not included in the scope of delivery, therefore not part of this sale. The scope of delivery only includes the accessories that are expressly listed here, in the order confirmation and invoice. Instruction manual – illustration, content and information without guarantee, therefore not binding – see "PDF. At that time NEW PRICE net 20.400 € SPECIAL PRICE BRAND NEW NET 14.900 € Free loading truck - FCA D-8840 ...
used
Electric - Hydr.- Machine Vice Offer number: 50105 Make: R�HM Type: 744 - 05 Machine No: xxxx Built: approx. 1993 Technical data: - Electric - Hydr. Machine vice - with separate hydraulic unit - and E. foot buttons for opening and - close the clamping jaws. - Jaw width 200 mm - Jaw height 75 mm - Clamping range approx. 0 - 350 mm - Guide track height approx. 100 mm - Total height 185 mm - separate hydraulic unit röHM , type HA 707 - 80 - Start 400 V / 0.37 kW - Weight approx. 100 Kg - Space requirement approx. L to 850 x W 280 x H 185 mm
used
Planscheibein little used condition Manufacturer TG Diameter approx.610mm Body bearing traces (can be easily removed!) Short cone chuck flange for spindle heads DIN 55027 or ISO 702/III (same as old standard DIN 55022) with stand-up bolt and nut nuts. Short cone holder size 8 for bayonet closure Cone-d2 139.735 mm Röhm Bilsing Werner Garant Toss Forkart Schunk rotary lining röhm rotary lining baking rotary lining manufacturer camlock rotary lining baking lining rotary foe flange forda rotary lining rotary lining adapter flange Special price
used
Planscheibein little used condition Manufacturer TG Diameter approx.500mm Body bearing traces (can be easily removed!) Through hole, approx. 90 mm Short cone chuck flange for spindle heads DIN 55027 or ISO 702/III (same as old standard DIN 55022) with stand-up bolt and nut nuts. Short cone holder size 8 for bayonet closure Cone-d2 139.735 mm Röhm Bilsing Werner Garant Toss Forkart Schunk rotary lining röhm rotary lining baking rotary lining manufacturer camlock rotary lining baking lining rotary foe flange forda rotary lining rotary lining adapter flange Special price
used
Planscheibein little used condition in wooden box Manufacturer presumably Röhm Diameter approx.610mm Through hole approx. xxx mm Short cone chuck flange for spindle heads DIN 55027 or ISO 702/III (same as old standard DIN 55022) with stand-up bolt and nut nuts. Short cone holder size 8 for bayonet closure Cone-d2 139.735 mm Röhm Bilsing Werner Garant Toss Forkart Schunk rotary lining röhm rotary lining baking rotary lining manufacturer camlock rotary lining baking lining rotary foe flange forda rotary lining rotary lining adapter flange Special price
used
Machine vice mechanical / hydraulic make RÖHM type RBFabr. -No: ID158413 / PTechnical specifications:Jaw width: 160 mmJaw height: 49.6 mmTotal length: 817 mmTotal height: 133 mmTotal width: 240 mmPunching force: 50 kNWeight approx: 60 kgWith- Clamping range 310 mm- mechanical drive with hand crank- hydraulic power transmission via hydraulic unitused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Lathe driver, center turning device -Outer: Ø 220 -Cone: Ø 106 mm -Short taper: 6 -Hole circle: Ø 133 mm -Weight: 6.4 kg
used
bar: max. 75 bar piston stroke: 0 mm revolutions per minute: 0 U/min 2 pcs. available. Price is for 1 pc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
thickness of jaw: 160 mm clamping capacity: 24 kN weight of the machine ca.: 31 kg mechanical centric vice, low construction With prism jaw and standard jaw SBO size 4 including turntable with graduation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
faceplate diameter: 260 mm numer of jaw: 4 Stück thickness of jaw: 35 mm hight of jaw: 60 mm height of plate: 80 mm tool adaptor: KK 5 DIN 55027 daylight: 68 mm Weight: 30 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
thickness of jaw: 160 mm : 45 mm total power requirement: kW weight of the machine ca.: 40 kg dimensions of the machine ca.: m turn tilt plate: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
thickness of jaw: 160 mm : 45 mm total power requirement: kW weight of the machine ca.: 40 kg dimensions of the machine ca.: m turn tilt plate: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.