british flag
Resale Logo

Rolling used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information auctioneer  Maynards Europe GmbH  http://www.maynards.com 
banner logo
start page > keywords Rolling > results
584 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
 page 1  > 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
125465292 2426

ÖAF Gräf & Stift for sale


last off Indicator: m BH-79252 Year of constr.: 1978, vehicle was never logged, authorities must be assumed by the buyer elapsed. Mileage: 112.161 km : KW 235 Displacement: 12. 763ccm Test badge: no inspection stick ...
used machine
 
last off Indicator: m BH-79252
Year of constr.: 1978, vehicle was never logged, authorities must be assumed by the buyer
elapsed. Mileage: 112.161 km
: KW 235
Displacement: 12. 763ccm
Test badge: no inspection sticker must be acquired by the buyer pursuant to § 57a, authorities
Drive type: Diesel
FIN: 6970237
Equity / total weight: 11.620/22,000 kg
Number of seats: front 3
Equipment: material facilities, with rear mounted plane
Documentation: types of licence available
Key: 1
Comments to the State: engine oil loss, loss of fuel, div. rubber bearing axis and Wishbone porous, double rolling joints front game, steering knuckle have heights game, compressed air brake system heavily leaking steering knuckle heads have game, div. rust spots. Abrasions, paint damage all around vehicle, greater rust spots in front bumper and front, sticker residue.
Expressly stated, that no complete inventory and check the functionality of the auction object performed. There is still the possibility that there are significant defects. To learn about the condition and the efficiency of the auction object, the possibility of the visit and this is highly recommended. The auctioneer assumes no responsibility for the quality, condition, completeness, accessories, special properties, open or hidden defects and other damages. Please note also the general terms and conditions of auction.
System number: 2320-0-410-0008
1978
Price  
    request
125460508 205

FORMAT 4 profit H350 16.50 for sale
5-Axis Machining Centre


Weight approx.: 9000 kgDimensions (l x w x h) approx.: 8590 x 4060 x 2600 mmsoftware: Woodflash working length x-axis: 5000 mmworking width y-axis: 1500 mmworking height y-axis: 150 mmmain spindle: 12 kWtool changer: 18- ...
used machine
 
Weight approx.: 9000 kg
Dimensions (l x w x h) approx.: 8590 x 4060 x 2600 mm
software: Woodflash
working length x-axis: 5000 mm
working width y-axis: 1500 mm
working height y-axis: 150 mm
main spindle: 12 kW
tool changer: 18-fach / 18-fold + 10-fach / 10-fold
vacuum pump: 90/108 cbm/h
drilling head vertical x-axis: 7 piece
drilling head vertical y-axis: 5 piece
drilling head horizontal x-axis: 4 piece
drilling head horizontal y-axis: 2 piece
saw unit: ja / yes in X
changing unit: ja / yes
edge gluing unit: nein / no
travelling way X-axis: 6000 mm
travelling way Y-axis: 1970 mm
travelling way Z-axis: 455 mm
Description: A young gantry-style CNC machining center with double-sided digital driving portal.

5-axis gimbal electric spindle 12 kW (S6) HSK F63, 24,000 rpm
Automatic central lubrication

Drilling head DH 18 6H 1S: Vertical 12 spindles: 7 spindles in the X direction and 5 spindles in Y-direction.
Horizontal 6 spindles:
4 spindles in the X direction and 2 spindles in Y-direction.
Forward stroke = 70 mm, max. Drill length = 70 mm and shank D = 10 mm.
All spindles are individually driven and available.
1 grooving saw - in X- Direction:
Max. Saw blade diameter 120 mm, max. Blade thickness 5 mm, max. number of revolutions infinitely variable up to 7500 rpm.

8 workpiece supports:
with front and rear stop row. Vacuum dual-circuit system with Suction cup height 100 mm.

Positioning display of the workpiece supports and vacuum cups in the CNC board.
The exact position of the vacuum cups on the workpiece supports is indicated by laser.

Hand-held terminal for controlling the axle speed incl. Emergency stop switch

Safety system with photocell on the front

18-fold plate changer traveling in X:
Max. Tool diameter 250 mm
Max. Tool length 280 mm

automatic tool length measuring system
2017
used machinery auction RESALE 27,500 €  
  CH   request
125436729 106

TOMA LEN 63C for sale
Eccentric Presses


Eccentric press TOM LEN 63 C was produced in 2012. The machine allows to realize punching, cutting and punching. The press can work with different instruments. It is also possible to full automation of the work by arming ...
used machine
 
Eccentric press TOM LEN 63 C was produced in 2012. The machine allows to realize punching, cutting and punching. The press can work with different instruments. It is also possible to full automation of the work by arming its tape dispenser.

Technical parameters of the LEN 63 C press:
- pressure force: 63 tons
- table surface: 800 x 630 mm
- slider surface: 450 x 280 mm
- overhang: 315 mm
- number of jumps in the machine: 65/130 min.
- number of jumps, manual work: 45/50 min.
- slider stroke adjustment: 10-105 mm
- slider adjustment: 70 mm
- table-slider clearance: 335 mm
- clearance between columns: 355 mm
- number of gears: 2
- engine speed: 730/1440 min.
- engine power: 4 / 7.5 kW
- dimensions of the press: 1425 x 1790 x 2550 mm
- machine weight: 5850 kg

The advantages of the TOMA LEN 63 C press:
- cast bodies: gray cast iron
- possibility to adjust the stroke size of the slider
- the ability to adjust the slider
- pneumatic balancing of the slider
- accurate, extended, self-lubricating slide guidance
- rolling adaptation of the eccentric shaft of the connecting rod
- clutch friction lining: brake, meeting the requirements of occupational hygiene regulations
2012
32,500 €  
  PL   request
125443106 109

CARTACCI TUBE MACHINERY, ITALY 6V1 + 1 for sale
Technological line for the tube rolling Cartacci 6


1998
84,750 EU?  
  PL   request
125421715 604

KUSTERS 212.70-3200, 2 bowl calander, width 340 cm for sale
calander, 2 bowl, width 340 cm


1 KUSTERS 2-bowl rolling calender type 212.70-3200 3200 mm Working Width (3400 mm face roller width) Year 1988 top bowl steel Schreiner (oil heated) bottom bowl Racolan (S-roll) thermal oil heated Pressure 275 Newt ...
used machine
 
1 KUSTERS 2-bowl rolling calender type 212.70-3200
3200 mm Working Width (3400 mm face roller width)
Year 1988
top bowl steel Schreiner (oil heated)
bottom bowl Racolan (S-roll)
thermal oil heated
Pressure 275 Newton/mm = 95 tons
1988
Price  
    request
125443005 109

AJAN SHP 260A for sale
Plasma cutter AJAN


Plasma cutter AJAN SHP 260A is a numerically controlled oxygen sheet cutting device, using original cutting tools mounted on it, and can be gas and plasma tools. With these tools you can make straight cuts and linear cut ...
used machine
 
Plasma cutter AJAN SHP 260A is a numerically controlled oxygen sheet cutting device, using original cutting tools mounted on it, and can be gas and plasma tools. With these tools you can make straight cuts and linear cuts, according to programmed cutting programs or by manually controlling the cutting path. Condition of the equipment good.
2015
34,500 EU?  
  PL   request
125421711 604

KUSTERS 213.70-3200, 3 bowl calander, width 340 cm for sale
calander, 3 bowl, width 340 cm


1 KUSTERS 3-bowl rolling calender type 213.70-3200 3200 mm Working Width (3400 mm face roller width) Year 1997, commissioned 1998 top bowl steel chromed (oil heated) middle bowl Racolan (S-roll) bottom bowl steel Sc ...
used machine
 
1 KUSTERS 3-bowl rolling calender type 213.70-3200
3200 mm Working Width (3400 mm face roller width)
Year 1997, commissioned 1998
top bowl steel chromed (oil heated)
middle bowl Racolan (S-roll)
bottom bowl steel Schreiner (oil heated)
thermal oil heated
Pressure 300 Newton/mm = 100 tons
1997
Price  
    request
125443015 109

LUNA MBC8835 for sale
Metal bundling machine Luna MBC8835


The machine is a special four-roller winder, intended for folding sheets AL m. Al. reflector. It has 3 independent lower rollers shortening the time to a minimum roll. The rollers are supported by adjustable, bearings sl ...
used machine
 
The machine is a special four-roller winder, intended for folding sheets AL m. Al. reflector. It has 3 independent lower rollers shortening the time to a minimum roll. The rollers are supported by adjustable, bearings slides for easy compensation of the deflection depending on the thickness and hardness of the material. Compensation of sagging upper roller is realized by longitudinal beam. All rollers are driven. The spinning process is carried out without slip to prevent scratching of the workpiece. CNC - equipped with an interpolation, it is a simultaneous rotation bending rolls, along with their shift. All rolls are chrome-plated and polished. All axes are programmable. The machine has the possibility of rolling difficult elliptical shapes.
2010
27,000 EU?  
  PL   request
125421708 107

STANKOIMPORT IB 2222 V4 for sale
Roll Bending Machines


3-roll steel rolling mill STANKOIMPORT IB 2222 V4 16X2000 was built in the USSR in 1984. The three-roll plate mill has mechanical drive, the top roll yoke is also opened thanks to the mechanical gear. Technical data f ...
used machine
 
3-roll steel rolling mill STANKOIMPORT IB 2222 V4 16X2000 was built in the USSR in 1984. The three-roll plate mill has mechanical drive, the top roll yoke is also opened thanks to the mechanical gear.

Technical data for STANKOIMPORT IB 2222:
- sheet width: 2000 mm
- thickness of rolled sheet at bending: 16 mm
- thickness of rolled sheet at bending: 12 mm
- the smallest bending radius: 240 mm
- bending speed: 7.7 m / min.
- upper cylinder diameter: 270 mm
- Overall dimensions (L x W x H): 4040 x 2020 x 1745 mm
- weight: machine weight (without electrical cabinet): 9800 kg
- DTR - technical and movement documentation in Polish and Russian

Rollers for STANKOIMPORT IB 2222 steel sheets are designed for cold bending of rolled and conical ring segments made of sheet metal with a yield point T = 250 MPa (25 kg / mm2).
1984
22,225 €  
  PL   request
125442719 109

BOUS mit Cebeco Einhausung for sale
steam/vapour degreaser plant


1 used steam/vapour degreaser plantMake: Bouswith housing make Cebeco 2 mm stainless steel for baskets in the size of appr. 400 x 800 x 150 mmfor use of Perchloretylen, filling volume appr. 125 ltr.with safetainer for fi ...
used machine
 
1 used steam/vapour degreaser plant
Make: Bous
with housing make Cebeco 2 mm stainless steel

for baskets in the size of appr. 400 x 800 x 150 mm
for use of Perchloretylen, filling volume appr. 125 ltr.
with safetainer for filling and defilling
with air purge and rolling lid

further accessories:
- Abus electric hoist GM3, 125 kg, for handling the baskets
- documentation for plant and hoist
1996
Price  
  DE   request
125421658 307

ZGODA 550L for sale
Rolling mills


ZGODA 550L rubber mill built in 1967 by the Polish Zak?ady Urz?dze? techniczne ZGODA in ?wi?toch?owice. The machine underwent overhaul in 2016 for PLN 118000 net. The scope of the repair included gears, bearings, lubrica ...
used machine
 
ZGODA 550L rubber mill built in 1967 by the Polish Zak?ady Urz?dze? techniczne ZGODA in ?wi?toch?owice. The machine underwent overhaul in 2016 for PLN 118000 net. The scope of the repair included gears, bearings, lubrication system and electrical cabinet.

Technical data for the ZGODA 550 L rubber mill:
- length of rolls: 1500 mm
- roller diameter: 550 mm
- main engine power: 100 kW
1967
128,300 €  
  PL   request
125442556 109

wrought profile rolling machine


wrought profile rolling machine for throating rods: - with desk- with straightening rolls- with hydraulic control

 
wrought profile rolling machine for throating rods:

- with desk
- with straightening rolls
- with hydraulic control
 
Price  
  DE   request
125374569 108

KT7 KTP 300-150 for sale
Welding Machines


The KT7 KTP 300-150 plasma cutter was manufactured in 2016. The set includes: plasma source, plotter and screw compressor. Technical data: - working field: 150 x 300 cm - drives based on precision stepper motors (th ...
used machine
 
The KT7 KTP 300-150 plasma cutter was manufactured in 2016. The set includes: plasma source, plotter and screw compressor.

Technical data:
- working field: 150 x 300 cm
- drives based on precision stepper motors (the possibility of servo motors)
- structure with a rolling gate, Y axis
- double-sided gate drive mechanically coupled
- the use of a very rigid and stable frame construction
- Y-axis: 4.7 NM in the ratio
- X-axis: 3.2 NM
- Z-axis: 3.2 NM
- work speed for G0: 16000 mm / min. (40000 mm / min - with servo motors)
- water table for cleaner cut, cooling and reduction of gas emissions during processing
- corrosion protection of the construction with zinc coating and specialist polyurethane paints
- sheet metal detection system
- protection system for burner failure
- burner height control system above THC
- burner anti-collision handle
- precise setting of sheet punching (longer service life of the burner)
- modern desktop with a 19 "screen and computer
- external USB port, allowing to open files using a pen-drive
- high cutting precision requiring no further complicated machining
- Linux based software - much more stable than Windows
- total weight of the machine: approx. 800 kg

CAM software:
- firing outside the useful edge
- external and internal offsets
- import of files in DXF format
- choice of smoking parameters
- software in Polish
- SheetCam program for generating typical shapes and simple detail distribution on the sheet

Screw compressor - technical data:
- power: 5.5 kW
- pressure: 8 bar
- efficiency: 0.85 m3 / min.
- efficiency: 51 m3 / h
- weight: 340 kg
- tank: 500 L
- dimensions (length x width x height): 2030 x 650 x 1500 mm
2016
14,250 €  
  PL   request
125372563 1020

Various tools


Various tools Cutters, blades,1 metal saw , 1 denudeuse, saw blades metal, 1 waterlevel, 3 rolmeter scrolling, 1 auto linker, pencils, various pliers

 


Various tools

Cutters, blades,1 metal saw , 1 denudeuse, saw blades metal, 1 waterlevel, 3 rolmeter scrolling, 1 auto linker, pencils, various pliers


 
used machinery auction RESALE 15 €  
  BE   request
125284463 1104

BIB COCHRAN Wee Chieftain Steam Boiler for sale
Steam Boiler


Make: BIB Model: Cochran Wee Chieftain Year: 2007 Condition: Used Machine type: Other Location of machine: United Kingdom Machine Details Steam Boiler Manufacturer BIB COCHRAN,United Kingdom Model  ...
used machine
 
Make: BIB
Model: Cochran Wee Chieftain
Year: 2007
Condition: Used
Machine type: Other
Location of machine: United Kingdom

Machine Details
Steam Boiler

Manufacturer BIB COCHRAN,United Kingdom

Model Wee Chieftain

YOM 2007

Construction standard BS2790-1992 Class 1

Fuel type Oil and Gas

Maximum heat input 2820 kW

Maximum Continuous Rating 4500 kg/hr

Design Saturation Temperature 188 degC

Working pressure 6,9 Bar.

Design pressure 11 Bar.

Hydraulic test pressure 16,5 Bar.

Boiler capacity 7900 Litres

Control Circuit 220 V

Electrical Supply 380 V 3ph 50Hz

Inspection history available. This steam boiler is in very good condition, worked for 4 years only.

It is sold together with controlling equipment.
2007
Price  
  UK   request
125372925 1020

Rolling plates


Rolling plates Rigid PVC Dimensions: 101 cm x 201 cm x 1 cm Number: 10

 


Rolling plates

Rigid PVC

Dimensions: 101 cm x 201 cm x 1 cm

Number: 10


 
used machinery auction RESALE 30 €  
  BE   request
125211218 1104

BIB COCHRAN (UK) Wee Chieftain for sale
Steam Boiler


Construction standard BS2790-1992 Class 1 Fuel type Oil and Gas Maximum heat input 2820 kW Maximum Continuous Rating 4500 kg/hr D ...
used machine
 

Construction standard BS2790-1992 Class 1

Fuel type Oil and Gas

Maximum heat input 2820 kW

Maximum Continuous Rating 4500 kg/hr

Design Saturation Temperature 188 degC

Working pressure 6,9 Bar.

Design pressure 11 Bar.

Hydraulic test pressure 16,5 Bar.

Boiler capacity 7900 Litres

Control Circuit 220 V

Electrical Supply 380 V 3ph 50Hz

Inspection history available. This steam boiler is in very good condition, worked for 4 years only.

It is sold together with controlling equipment.

Price 27000 EUR FCA Lithuania
2007
27,000 €  
  LT   request
125349305 109

VEB UPW 12.5 x 70 for sale
Thread Rolling Machine


Weight approx.: 2000 kgDimensions (l x w x h) approx.: 1300 x 1200 x 1200 mmDescription: max. pressure 12.5 ton, max workpiece diameter 70 mm, minimum workpiece diameter 10 mm, with large stock of tools

 
Weight approx.: 2000 kg
Dimensions (l x w x h) approx.: 1300 x 1200 x 1200 mm
Description: max. pressure 12.5 ton, max workpiece diameter 70 mm, minimum workpiece diameter 10 mm, with large stock of tools
 
used machinery auction RESALE 2,400 €  
  NL   request
125210811 109

QUANTUM SAR 3in1 1000 for sale


Combined machine bending cutting rolls of quantum Type: SAR 3-in-1 1000 Year 2015 Description: Cutting, bending, reel incl. large sturdy fahrbahrem frame Technical data: Cutting capacity approx. 1 mm  ...

 
Combined machine bending cutting rolls of quantum
Type: SAR 3-in-1 1000
Year 2015

Description:
Cutting, bending, reel incl. large sturdy fahrbahrem frame

Technical data:

Cutting capacity approx. 1 mm
Blade width approx. 1050 mm

Bending performance of aluminium/copper 1.5 mm steel sheet 1 mm
Total width of the segments 1050 mm

Rolling power of Max 700 mm - steel 1 mm
Aluminium/copper 1.5 mm
Stainless steel 0,5 mm
Total width of the rollers 1000 mm

Weight of the machine CA 290 kg
Base weight approx. 40 kg
Dimensions (Lxwxh) incl. support 1400 x 1400 x 1700 mm
 
1,250 €  
    request
125333126 109

AEROTERM Ultraterm ATW 1300UV for sale
AEROTHERM Painting Line


Weight approx.: 10000 kgDimensions (l x w x h) approx.: 14000 x 2350 x 1600 mmDescription: Belt width: 1300mm, UV section lenght: 2500mm, loading section lenght: 800mm, unloading section lenght: 500mm, dryer lenght: 3800 ...
used machine
 
Weight approx.: 10000 kg
Dimensions (l x w x h) approx.: 14000 x 2350 x 1600 mm
Description: Belt width: 1300mm, UV section lenght: 2500mm, loading section lenght: 800mm, unloading section lenght: 500mm, dryer lenght: 3800mm, dryer width: 2350mm, dryer height: 1400mm, belt surface hight: 920mm, belt speed: continuously controlling 1,2-7,2 m/min, no. of UV lamps rows: 2, no. of UV lamps in a row: 4, side lamps left/ right: 1/1, cooling by air high pressure, total power: 52,5kW
2009
used machinery auction RESALE 15,000 €  
  PL   request
 page 1  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
More models (2 or more machines):
(17)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold

Sold machinery

Heavy Lathes POREBA TCA 160


Heavy lathe POREBA TCA 160 was produced in 1959 by the famous Polish FUM POREBA. Technical data of lathe POREBA TCA 160: Scope of work:-height of tusks: 800 mm -maximum turning diameter over bed: 1600 mm -maximum turning diameter over support: 1300 mm -eyepiece: fi 800 mm -maximum turning diameter in the pó?okularze: 250 mm -maximum turning length: 6000 mm -maximum weight of workpiece between centers in: 16000 kG -permissible cross section of the chip (turning steel Rr = 60 kG/mm2) on a single support: 30 mm2 -permissible cross section of the chip (turning steel Rr = 60 kG/mm2) on a single support: 50 mm2 -permissible force on the knife: 6000 kG -the maximum torque at the spindle: 630000 kg.cm -the maximum cross section 70 x 70 mm knife: Cap Headstock: -number of spindle speeds: 24 n -the exponent of the speed: 1.25 -spindle speed range: 1,12-224 RPM., 1,12-224 r/min, 0.85-170 RPM. -front spindle neck diameter: 260 mm -slot in the spindle of the cone metric: # 120 -reducing Bush metric cone Tip: # 120/80 -spindle bore diameter: 105 mm -diameter of the blade Cap: 1600 mm Suport, feeds the normal: -20 longitudinal feed range: 0,19-5,0 mm/Rev. -20 transverse feed range: 0,095-2.5 mm/Rev. -20 feed on the upper tray of the range: 0,095-2.5 mm/Rev. Suport, feeds 8-20 longitudinal feed range: 1.5-40 mm/Rev. -20 transverse feed range: 0.75-20.0 mm/Rev. -20 feed on the upper tray of the range: 0.75-20.0 mm/Rev. Suport, feeds minute:-20 longitudinal feed range: 12-320 mm/Rev. -20 transverse feed range: 6-160 mm/Rev. -20 feed on the upper tray with a range: 6-160 mm/Rev. Suport, feeds to thread (the main screws. train.):-35 thread jumping metrycz. about t. : 1-50 mm -jumping 35 inch threads range: 24-1/2 scroll/inch Suport, feeds for threading on the top tray:-25 thread jumping metrycz. about t. 0.25-7 mm -jumping 35 inch threads/inch scroll: the scroll 28-3/inch Feed rates associated to the rolling cones of gradients creating: 1:1.5 (d) 1:1000 -rapid traverse: 4000 mm/min. Konik: -barrel diameter: 200 mm -stroke sleeve: 600 mm -slot in the spindle sto?. meter.: # 80 -radial offset: +-30 mm Glasses: -diameter adjustment range normal: 200-600, 200-500 equipment, okular, 300-800 mm -adjustment range of diameters okular special equipment: 30-300, 50-400, 200-500 mm Pó?okular: -adjustment range pó?okulara diameter: 50-250 mm Drive:-main motor power: 40 kW -the engine speed: 750 RPM. -rapid feed motor power: 2.2 kW -the engine speed rapid feed rate: 3000 rpm. -oil pump motor power: 0.37 kW -engine oil pump: 1500 rpm. -performance oil pump: 25 l/min. Sizes and weights: -distance between centres: 3000-15000 mm -weight for length 6000 mm and 1 support: ok. 30000 kg -extra weight Prov difference length 1000 mm: 1200 kg -the weight of the additional bracket: 1500 kg

Carousel Turning Machines (Lathes) RAFAMET KCF 200


Carousel lathe RAFAMET NCC 200 built in 1963. The machine is accurate, suitable for heavy duty. Lathe was made full service. The data characteristic of lathe RAFAMET NCC 200: -turning diameter: 2400 mm (extended from 2250 mm) -height rolling: 1250 mm -slide the slider of a vertical: 1000 mm -engine: 45 kw -dimensions of the machine: 6100 x 5000 x 5500 mm -weight: 50 tons The advantages of the lathe: -New bearings -new oil, cleaned filters-new hydraulic lines -listed lead screw nut -calibration -It has DTR: full technical documentation in Polish language -made was full servicing of the machine

Roll Bending Machines STANKOIMPORT IB 2222 V4


Rolling 3-roller for sheet metal STANKOIMPORT IB 2222 V4 16X2000 was built in the Soviet Union in 1984. Trójwalcowa sheet metal rolling mill has a mechanical drive, the yoke of the upper roller is also opened with gears. Technical data winders STANKOIMPORT IB 2222: -width: 2000 mm -rolled sheet thickness in bending: 16 mm -the thickness of rolled sheet at podginaniu: 12 mm -the smallest bending radius: 240 mm -bending speed: 7.7 m/min. -the diameter of the upper cylinder: 270 mm -overall dimensions (l x w x h): 4040 x 2020 x 1745 mm -weight: weight (without Cabinet): 9800 kg -DTR-technical-functional in Polish and Russian Fight for sheet metal bending are intended 2222 IB STANKOIMPORT cold rolled and tapered ring segments of the sheet with a yield T = 250 MPa (25 kG/mm2).

Rolling mills ZGODA 550L


Rolling machines for rubber CONSENT 550L built in 1967 by the Polish Factories of technical equipment CONSENT in ?wi?toch?owice. The machine has undergone complete renovation in the year 2016 for a total of $118000 NET. The scope of the renovation include gears, bearings, lubrication and a wardrobe. Technical data of rolling mills, rubber CONSENT 550 L: -roll length: 1500 mm -diameter of the rolls: 550 mm -engine power: 100 kW

Plate And Section Shears KRASSER CENTURIO


Slitting line sheet KRASSER CENTURIO. The individual elements of the lines were built in the years 2008-2011. Thickness to 1.25 mm, the width of the circle to 1.25 m. The line KRASSER: CENTURIO 1. Automatic storage for 6 coils + 1 cargo station (producer: Krasser Centurio (formerly E-ventures) Austria 2010 r.) 2. the cutting and cutting-controlled CNC, automatic adjustment of the width and depth of the blade (manufacturer: Krasser Centurio (formerly E-ventures) Austria 2010 r.) 3. to set the Table in a stack of 3 m long with automatic lowering (useful when cutting pattern) (2011) 4. compensatory Tower with 2 pneumatic stations (2008) 5. the positioning to the scroll process coils (2008) 6. Cover 12 t with sliding guides to automate movement when scrolling through the coils (2008)

Steam Boiler BIB Cochran Wee Chieftain Steam Boiler


Make: BIB Model: Cochran Wee Chieftain Year: 2007 Condition: Used Machine type: Other Location of machine: United Kingdom Machine Details Steam Boiler Manufacturer BIB COCHRAN,United Kingdom Model Wee Chieftain YOM 2007 Construction standard BS2790-1992 Class 1 Fuel type Oil and Gas Maximum heat input 2820 kW Maximum Continuous Rating 4500 kg/hr Design Saturation Temperature 188 degC Working pressure 6,9 Bar. Design pressure 11 Bar. Hydraulic test pressure 16,5 Bar. Boiler capacity 7900 Litres Control Circuit 220 V Electrical Supply 380 V 3ph 50Hz Inspection history available. This steam boiler is in very good condition, worked for 4 years only. It is sold together with controlling equipment.

Steam Boiler BIB COCHRAN (UK) Wee Chieftain


Construction standard BS2790-1992 Class 1 Fuel type Oil and Gas Maximum heat input 2820 kW Maximum Continuous Rating 4500 kg/hr Design Saturation Temperature 188 degC Working pressure 6,9 Bar. Design pressure 11 Bar. Hydraulic test pressure 16,5 Bar. Boiler capacity 7900 Litres Control Circuit 220 V Electrical Supply 380 V 3ph 50Hz Inspection history available. This steam boiler is in very good condition, worked for 4 years only. It is sold together with controlling equipment. Price 27000 EUR FCA Lithuania

Dough Rolling Machine SEEWER RONDO ECOMAT SSO 69C


Including dough sheets.

Circular saws Martin T-72


Auction name: Machines, rolling stock and building materials in Amsterdam Online auction Start of auction: 25 April 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 08 May 2018 18:01 GMT +0200 (Western Europe (DST) The price listed is ...

Double-sided 5-axis pin bank


Auction name: Machines, rolling stock and building materials in Amsterdam Online auction Start of auction: 25 April 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 08 May 2018 18:01 GMT +0200 (Western Europe (DST) The price listed is ...

Combi-machines Brev.Celaschi


Auction name: Machines, rolling stock and building materials in Amsterdam Online auction Start of auction: 25 April 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 08 May 2018 18:01 GMT +0200 (Western Europe (DST) The price listed is ...

CNC controlled panel saws Holzma HPP23 / X / 38/22 / L


Auction name: Machines, rolling stock and building materials in Amsterdam Online auction Start of auction: 25 April 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 08 May 2018 18:01 GMT +0200 (Western Europe (DST) The price listed is ...

Rolling Mill VEB ERSTE MASCHINENFABRIK GLW 200


Roll diameter: 200mm, roll length: 450mm, weight: 5.1t.

Automatic cutting/unrolling machines Rimoldi 727 / E


Auction name: Machinery of a car mats factory in Lokeren (Belgium) Online auction Start of auction: 16 April 2018 17:00 GMT +0200 (Western Europe (DST) Closing time: 24 April 2018 15:50 GMT +0200 (Western Europe (DST) The price listed is an op ...

ALUMINIUM FOIL ROLLING MILL LINE KYONGIL MACHINERY 4-HI - 850 MM - 12 MICRONS


Qty. 1 Second-hand aluminium foil rolling mill line Mfc.: Kyongil Machinery Built: 2003 Stopped: 2015 Type: 4-Hi Strip width: 850 mm Thickness Entry: 0.3 mm Exit: 12 microns Consist of: Foil rolling mill Foil separator Doubler Annealing furnac ...

HI REV. COLD ROLLING MILL - STANLESS STEEL UNITED 500 MM - 0.2-1.5 MM


Qty. 1 Second-hand 4-Hi cold rolling mill Brand: United Built: 1998 Type: 4-Hi, Reversible Strip width: max. 500 mm Thickness: 0.2-1.5 mm Line speed: max 300 m/min. Material: Stainless steel

SKIN PASS MILL INCL. TENSION LEVELER BWG, STAMCO & OTHERS 500-1300 MM - 0.3-6.0 MM


Qty. 1 Second-hand skin pass rolling mill including leveller and embosser Mfc.: BWG, STAMCO, HORSBURGH & SCOTT Built: 1980 Overhauled and installed in new place: 1998 Material Thickness: 0.30 - 6.00 mm Material Width : 500 - 1300 mm Voltage supply ...

Ball rolling unit Koppens UM600-282


Product number: 1230 Type: UM600-282 Year of construction: 1997 Belt width: 600 mm Power: 3 x 380V, 50Hz, 0.27kW Dimensions: 1300 x 700 x 1700 mm Weight: 168 kg

Croquette rolling machine Tap Machinebouw PPR400


Product number: 1220 Type: PPR400 Serial number: 010 Year of construction: 2009 Belt width: 400 mm Dimensions: 1800 x 900 x 2000 mm With variable speed

Croquette/Bitterbal rolling machine Tap Machinebouw PLB400


Product number: 1219 Type: PLB400 Serial number: 012 Year of construction: 2007 Belt width: 300 mm Power: 230V, 50Hz Dimensions: 1150 x 830 x 1650 mm Used to roll 'bitterballen'

Croquette rolling machine Koppens CR250


Product number: 1215 Type: CR250 Belt width: 300 mm Dimensions: 1800 x 650 x 1950 mm

Thread Rolling Maschines ORT RP 30 U


TYPE: Hydraulic T: 30 ROLLERS NUMBER: 2 RACK LENGTH: 200 mm. Capacity: Ø 4 ÷ 100 x 10 mm. Weight: 2800 kg. Notes: Tilting spindles

Roll Bending Machines LISSE CB-9-25


4 rolls Rolling/Crushing machine LISSE type CB-9-25 Bending capacity: Max Length 2500 mm x max Depth 11 mm Crushing capacity: Max Length 2500 mm x max Depth 9 mm Superiors/inferiors rolls diameter: 255 mm Lateral rolls diameter: 201,5 mm Voltage: 380 ...

Rolling packaging machines Robopac Ecoplat PPS


Pallet wrapping machine: Robopac, type Ecoplat PPS, man. 2013, serial number: KN / 117439 Details on Netbid X14426-7

Horizontal Numerically Controlled Machining Centre Mazak FH 680


panning for the x 1100 mm panning for the y-axis 800 mm panning for the z axis of the 825 mm Control: Mazatrol M PLUS table size 630 x 630 mm pallet number of pallets 2 Cone SK 50 Number of tools in stock 80 speed range rolling weight ok. 10000 rp ...

Dough sheeters SEEWER RONDO RONDO DOGE SSO-62


The rolling pin to make the dough Rondo Doge with posypywaczem flour, VG condition, technically. We issue VAT invoices and EU VAT

AMUT VERTICAL CENTRIFUGE AMUT mm.400 rotor diameter


AMUT VERTICAL CENTRIFUGE mm.400 rotor diameter, length mm.1900 mm., 120 mm.long paddles on the whole length, AISI 304 steel basket diam.mm.650, height : 1.975 mm. mm.3,0 holes, self-cleaning system through water sprays. Rolling type be ...

Other Machining Centres GIMATEC ST119 CN


CNC Rolling machine, machine à rouler, GIMATEC ST119 CN, Year of construction: 2008, Serial number: N/A, Equipped with ADVANTAGE 400 controller - DELTA TAU, Total dimensions: circa 760 x 700 x H 1640 mm Locatie: Taillage

Thread Rolling Machines ORT RP18C


ORT RP18C 2-roll 18 ton swivelling heads for through feed and plunge PLC+brushless motors controlled position+controlled pressure machine under power in our warehouse

Thread Rolling Machines Profiroll Bad Dueben PRZ 80 CNC


THREAD ROLLER, CYLINDRICAL, 2 DIE Profiroll Bad Duben PRZ 80 CNC-AC CNC TWO DIE CYLINDRICAL THREAD ROLLING MACHINE Maximum Rolling Pressure: 80 Tons (800kN) Maximum Rolling Diameter Infeed : 160mm Spindel dia: 100mm Swivel Angle: max. ±10 Die m ...

Thread Rolling Machines ORT RP 90


TYPE: Hydraulic T: 90 ROLLERS NUMBER: 2 RACK LENGTH: 300 mm. Capacity: Ø 10 ÷ 160 x 16 mm. Power: 60 kW Weight: 10000 Kg. YEAR built: 1992 Notes: Spindle diameter 100 mm. -Roller diameter 190 ÷ 310 mm. -Main motor power 55 kW Accessories: Loadi ...

Thread Rolling Machines MAGNAGHI T 12


TYPE: Hydraulic T: 15 ROLLERS NUMBER: 2 RACK LENGTH: 120 mm. Capacity: Ø 3 ÷ 75 mm. Power: 4.75 Hp. Weight: 1200 Kg Notes: Step 0.5 ÷ 5 mm. -Spindle Diameter 54 mm.

Thread Rolling Machines MICHIGAN ROTO-FLO 3725


Type: Rolling rack ROLLERS NUMBER: 2 Capacity: Ø 50 mm. Power: 19 Kw YEAR built: 2000 Notes: Performs processing of rolling and threading-1650 mm total stroke. -Can mount 330 + 330 mm 610 + racks simultaneously. Accessories: Siemens Simatic S5-100 ...

Thread Rolling Machines MICHIGAN ROTO-FLO 3225


Type: Rolling rack ROLLERS NUMBER: 2 Capacity: Ø 50 mm. YEAR built: 1997 Notes: Performs processing of rolling and threading-1260 mm total stroke. -330 mm 610 + racks can be mounted. or 330 330 330 + 3 simultaneously from racks + mm. Accessories: S ...

Thread Rolling Machines ORT RP 30 U


TYPE: Hydraulic T: 31 ROLLERS NUMBER: 2 YEAR built: 1995 Notes: 69.85 mm spindle bore diameter. -Ø 80 mm rullabile min 4 max. Accessories: Charger-Inverter to change speed, spindle speed

Thread Rolling Machines MAGNAGHI 807


TYPE: Hydraulic T: 32 ROLLERS NUMBER: 2 RACK LENGTH: 200 mm Capacity: Ø 80 x 8 mm. Power: 15 Hp. Weight: 2800 Kg. Dimensions: 1650 x 1600 x 1500 mm. YEAR built: 1980 Notes: 69.85 mm spindles.

Rolling mills Diverse 2100 roll mill + stockblender


1 x Heavy duty 2 roll mill Roll dimensions: 2100mm x 665mm dia. Hydraulic nip adjustment, Safety push bars, Peripherally drilled rolls, Sleeve bearings with grease lubrication, Right angle drive gearbox, with Siemens 240kW DC variable speed motor, ...

Thread Rolling Machines MICHIGAN ROTO-FLO 3237


Type: Rolling rack ROLLERS NUMBER: 2 LENGTH: 915 mm RACKS. Capacity: Ø 50 mm. Power: 20 Hp Weight: 10500 Kg. Dimensions: 3000 x 3000 x 2200 mm. YEAR built: 1995 Notes: Total stroke 1066.80 mm. -Can mount 330 mm 610 + racks simultaneously. Access ...

Thread Rolling Machines IZPE RCS 120 H


TYPE: Hydraulic T: 20 ROLLERS NUMBER: 2 RACK LENGTH: 120 mm. Capacity: Ø 80 mm. Power: 10 Hp. Weight: 1700 Kg. Dimensions: 2000 x 1100 x 1400 mm. NOTE: spindle diameter 54 mm

HI ROLLING MILL - SENDZIMIR MILL HITACHI 20-HI - 1030 MM - 4.0-0.2 MM


Qty. 1 Second-hand cold rolling mill Mfc.: Hitachi & Shinko Type: 20-Hi Built: 1975 Modification: Coil weight from 7.5 tons to 13 tons & electrical parts in 1983 Add AGC (HTC-HIROP) in 1995 Strip width: 600 – 1030 mm Thickness Entry:4.0 mm Exit: ...

HI SENDZIMIR ROLLING MILL SENDZIMIR ZR16-18 - 12-HI


Qty. 1 Second-hand 12-Hi Sendzimir Rolling Mill Mfc.: Sendzimir Type: ZR16-18 - 12-Hi For special steel and stainless steel strip! Built: TBA! Upgrade 1993 complete revamped! Strip width: 350 – 450 mm Thickness Entry: 1.29 mm Exit: 0.05 mm Line sp ...

Inspection & Packing machine TESTA 1998


2 x Inspection & Packing machine, Make TESTA YEAR 1998 METER COUNTER WORKING WIDTH 240CM INSPECTION LENGTH MEASURING ROLLING WEIGHING PACKING AUTOMATIC LABEL GLUEING AUTOMATIC LABEL PRINTING AUTOMATIC ROLLER UNLOADING F ...

bolt screw rolling machine Dongil(Korea) 120ton


120TON THREAD ROLLING MACHINE(BOLT SCREW MACHINE) Make:Dongil(Korea) Hompage:abc://abc.dongil-mc.co.kr Manufacturing year:2012 Rolling Force capacity:120ton Model:DIL-120 The number of dices:2 Product Max. diameter: 200mm Product Max. le ...

Thread Rolling Machines DONGIL(KOREA) 120ton


120TON THREAD ROLLING MACHINE(BOLT SCREW MACHINE) Make:Dongil(Korea) Hompage:abc://abc.dongil-mc.co.kr Manufacturing year:2012 Rolling Force capacity:120ton Model:DIL-120 The number of dices:2 Product Max. diameter: 200mm Product Max. le ...

Boring Mills TOS WHN 13.8B CNC


Control system Heidenhain TNC 415 Spindle diameter 130 mm Tapered hollow spindle ISO 50 Spindle speed range 10 to 1500 rpm Table transverse (X): 3500 mm Rolling headstock stand for (Y): 2000 mm Longitudinal displacement rack (W): 1250 mm Eject work ...

Separators Baader 607


Product number: 1120 Type: 607 Serial number: 12-5405-0607 Year of construction: 1994 Filters: Ø 3 mm, 2 pcs. Power: 3 x 400V, 50Hz, 11kW Dimensions: 1680 x 1650 x 1970 mm Weight: 1950 kg With support rolling conveyor Including trolley for filte ...

Rolling mills Shaw 60in x 22in Two Roll Mill


Qty 1 x Shaw 60in x 22in two roll mill, Manual nip adjustment, Peripherally drilled rolls (front and back), Hinged guide plates, Sleeve bearings with motorised lubrication, Right angle drive gearbox with 115Kw DC variable speed motor, All mounted on ...

Roller Finishing And Deep Rolling Machines Rogi PR1000


Auction name: Metalworking machines and workshop in Mierlo and Bergeijk Online auction Start of auction: 29 November 2017 17:00 GMT +0200 (Western Europe (DST) Closing time: 12 December 2017 18:01 GMT +0200 (Western Europe (DST) The price listed ...

Bending Machines Davi MCB 3028


Controll Smart-Pro Hydraulic 4 roll Maximum sheet thickness 13 mm Bending length 3100 mm Max. Rolling capacity 2,500 13 mm Ø Max. Prebending capacity 2,500 10 mm Ø Top Roll Ø 280 mm Bottom Roll Ø 260 mm Side Rolls Ø 260 mm Power 15 kW

Slitting And Rewinding Machine WZFQ 1100


This machine is used for slitting and rewinding various large rolling materials such as paper,(20g/m2-120g/m2) cellophane paper, bill paper, double-face adhesive tape, PVC, OPP, PET, weave material, nowoven of cloth, etc. • This machine use microcomputer ...
Find used machinery dealers in your country