used ROBART GRAPHICS Rotation cutting machines

Digital silver halide polyester Exposure system Internal drum Material: 2 magazines (can be upgraded) Material definition: Up to 16 Tape definition: Up to 16 Capacity of material: Up to 61m / 200 ft per roll. Plate thickness: 4 mil / 0.1 mm - 8 mil / 0.2 mm Plate size: 454 x 525 mm 3600 dpi: 14 plates per hour 2540 dpi: 17 plates per hour 1800 dpi: 24 plates per hour 0900 dpi: 29 plates per hour With HQ-RIP workflow

ABG Omega SR 410 from 2010 with 2 flexo printing units 2 diecutters with one GapMaster from Kocher & Beck Manufacturer: AB Graphics Type: SR 410 Year of production: 2010 Flexo printing units: 2 units Rotary die cutting untis: 2 GapMaster: Yes one of the die cutters is Gapmaster Turning bar: Yes Nip rollers: Yes UV System: GEW Please contact us for more information or pricing. Machine is available immediately

Rotation cutter Built in 2006; working condition

In working condition Punch force- 15 t Work area 1000х1000 Max thickness - 4.5 mm Plus:- 2 x Extra Original Side Tables Additional Programme Memory Storage Unit Full Set of Books Safety Optical Guards

weight max.: 2,2 t workpiece diameter: 101 - 1524 mm feed speeds infinitely variable: 0 - 3600 mm/min gear diameter: 254 mm gear width: 76 mm total power requirement: 0,5 kW weight of the machine ca.: 0,245 t dimensions of the machine ca.: 1,02 x 0,82 x 0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 5,0 t workpiece diameter: 303 x 2438 mm feed speeds infinitely variable: 0 - 1745 mm/min gear diameter: 305 mm gear width: 100 mm total power requirement: 0,5 kW weight of the machine ca.: 0,37 t dimensions of the machine ca.: 1,5 x 1,05 x 0,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 1000 kg table turning speeds: 180 - 1800 mm/min. roll diameter: 200 x 50 mm workpiece diameter: 50 - 1500 mm volt: 230 V / 50 Hz range L-W-H: 950 x 220 x 344 mm Mitlauf weight: 100 kg range L-W-H: 1270 x 310 x 344 mm Antrieb Furnishing: - Consists of a drive unit and a follower unit. - Clean, fluid turning movement even in the lower speed range. - PU rollers. - The container diameter can be adjusted quickly and easily using socket pins. - Hand remote control (3 meters) to set the speed and right / Counterclockwise rotation. - foot switch. - Compact, stable structure, easy to handle. Scope of delivery: - 1 control (integrated) - 1 foot switch - 1 wired remote control - Operating instructions in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 3000 kg. table turning speeds: 120 - 1200 mm/min. roll diameter: 250 x 75 mm workpiece diameter: 150 - 2000 mm volt: 230 V / 50 Hz range L-W-H: 1210 x 300 x 480 mm Mitläufer weight: 154 kg range L-W-H: 1510 x 500 x 480 mm Antrieb Furnishing: - Consists of a drive unit and a follower unit. - Clean, fluid turning movement even in the lower speed range. - PU rollers. - The container diameter can be adjusted quickly and easily using socket pins. - Hand remote control for setting the speed and clockwise - counter clockwise rotation. - foot switch. - Compact, stable structure, easy to handle. Scope of delivery: - 1 control (integrated) - 1 foot switch - 1 wired remote control - Operating instructions in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Positioning unit PAGUS stroke: 100 mm, rotation: 330° lifting motor: KEB 57/2.200.4,2 Rotary motor: PHYTRON ZSH 57-200-4,2 Rod diameter: Ø 30 mm Flange diameter: Ø 45 mm bolt circle diameter: Ø 55 mm hole diameter: Ø 4.5 mm with guide frame, 70 mm height adjustable used, tested ! Dimensions: 530 x 250 x 230 mm

Container turning device, roller block PAGUS load capacity: approx. 10 t per trestle 3 pieces wheel diameter Ø 320 mm without drive ! Weight: 3 x 950 kg Dimensions: 3 x 2020 x 870 x 1100 mm

weight max.: 5 t workpiece diameter: 300 - 2500 mm drum diameter: 250 x 100 mm feed: 100 - 1000 mm/min total power requirement: 0,75 kW weight: 0,6 t dimensions: 1,5 x 1,0 x 0,6 m characteristics • Self-aligning for multiple diameters • Infinitely variable speed of the drive unit • Polyurethane coating of the rollers • Optimum load distribution (4 rolls/unit), particularly gentle for workpieces with low wall thickness and sensitive surfaces • High stability due to the solid construction of the machine • CE certificate • Very good value for money • Remote control on the cable • Documentation in English The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For CNC plasma and cutting cutting systems 1 stueck Sideros suction system type ECO 4 HC, max. 5000m3/h for plasma and firing cutting systems for suction firing table from 1.5 m width (at 500 mm module width) APPLICATION dust and smoke extraction systems on plasma and firing cutting systems ( plasma up to 130 amps). Cutting of steel and stainless steel sheets. suction and filter system with integrated fan, automatic, dust-duty -cleaner filter cleaning, Siemens Simatic system control and PTFE membrane filter. The system is designed for a volume flow of max. 5,000 m3/h and a maximum of 2,500 Pa. filter class M at a separation degree of > 99.9% (BIA use category U,S,G,C). dimensions: Height: 2,100 mm depth: 1,413 mm Width: 1,413 mm Weight: 620 kg Air entry: NW 200 - 250 mm Price 6,990.00 EUR (price + VAT ex works, excluding pipelines, installation and commissioning);  ...

Water-cooled plasma cutting system make MESSER GRIESHEIM type HA 95Machine -No: 4030234Technical specifications:Cutting current at 60% duty cycle: 95 AOperating Voltage: 110VOpen Circuit Voltage:260VPower consumption max.:23 kVAMains connection voltage: 220/380/415/500 VDimensions approx.: 70 x 770 x 850 mmApprox. weight: 160 kgwith- Plasma hand cutting torch PHC 95 with hose pack- without rolesusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pipe Cutting Machine Fabr. HEINRICHSGLÜCK Type RBSM 1Komm.-Nr. 4026, machine no. 207086, year of construction 1994CUTTING MACHINE:Workpiece diameter: 100 - 600 mmThree-jaw chuck outer / inner clamping: 193 - 321 mmExternal voltage: 8 - 136 mmInternal tension: 74-201 / 188-315 mmBurning amplitude: 0 - 276 mmBurning diameter: 0 - 390 mmRotary drive motor power: 0.21 kWSpeed: 5.7 rpmCutting speed: 50 - 1800 mm / minWorking height: 1140 mmTotal height: 1620 mmWidth (foot): 700 mmControl: SPS S5-9Lifting table:Load capacity: 800 kgTable height: 350 - 840 mmCentering grooves Drm.:200 - 900 mm (every 100 mm)Table size: 860 x 860 mmSwinging cycle (manual): 90 °Lifting motor: 1.1 kWLifting time approx. 47 sec.End limitation: 2 limit switchesDrive: manualWheel diameter: 80 mmGauge: 580 mmRated voltage: 380VRated operating current: 2 ACONSTRUCTION:2 roller blocks, Rollendrm.:130 mmDistance betwee ...

CNC flame cutting machine make ESAB type Numorex NXB 6500Machine -No: 89022, built in 1989Track width: 6500 mmTrack length: 12000 mmCutting table height: 700 mmNumber of burners: 6 oxy-fuelType of control: CNC 510With- Extraction systemused, from large company, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Plasma cutting machine make L-TEC type Plasmacut 30Fabr. -No: 174895Welding current: 30 AWelding voltage:: 100 VOpen circuit voltage:: 350 VSupply voltage: 380 VWith- hose package- Ground cable- mobileused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Photo-optical flame cutting machine make MESSER GRIESHEIM type CORTA AR 2000/2600Machine -No: 18201089 Fabr. -No: 182010 Bj. 1989Track width: 2600 mmWorking width = boom width: 2000 mmRail length: 9 mNumber of burners: 6Cutting speed: 50 - 3000 mm / minMax. Workpiece thickness: 3-200 mmPower consumption: 1.5 kVAWith- Photoelectric control type KS 20/07xa0xa0xa0 Property -No: 72277211 Series -No: 1451003used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Cooling Unit - Water Recooler Fabr DELTATHERM type RKV 2Sfrom a flame cutting machineFabr. -No: 3/3089, year of construction 1990Tank capacity approx: 120 lVoltage: 380 voltsElectricity: 7.5 ampsPower: 2.0 KWRefrigerant: R 22Weight approx. 165 kgOutside dimensions: 860 x 950 x 1820 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Plasma cutting machine make THERMAL-ARC type PAK 5 XRFabr. -No: 183247 / EO2016APower: 26/18 ARated power: 55A at 100VWith- Burner- hose packageusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Plasma cutting system make SPIROYear of manufacture 2002Technical specifications:Plasma extraction table: 6000 x 1500 mmPlasma source: Hypertherm 1000Feeding and straightening machine: 1500 mmMotorized decoiling system for: 3 coilsCoil weight: 1.25 twith- Hypertherm 63 series- Control Burny 2.8 plus CMW- IOWA precision PCF6016- Spare parts packageusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Mobile small flame cutting machine make MESSER-GRIESHEIM type Quicky-electronicMachine -No: 23296, built in 1965Technical specifications:Cutting range: 3 - 100 mmstepless travel speed: 100 - 1000 mm / min.Drive power: 40 WPower connection: 220 V / 50 HzExternal dimensions: 450 x 250 x 250 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Universal cutting machine with circular knife, d 250 mm

Kitchen slicer, crooked, type KSSM-V 1.4 D

Cutting mill / pipe cutting mill Special mill for shredding pipes Feeding via feeding shaft (rope pull system) Manufacturer: NEUE HERBOLD, D-74889 SINSHEIM Rotor diameter: 800 mm Working width: 600 mm Drive: 110 kW

The servoCUT 402 / 502 / 602 cutting machines is designed as a wet cutting grinding machine for cutting large / small / regularly / irregularly shaped workpieces made of metal ceramic or material compositions. Thanks to the modern joystick control, the separation process can start after just a few seconds: position the test piece clamping, the cutting disc with joystick in a hurry, press START and leave the machines (unmanned). Depending on the version available as a fully automatic version (X-Y-Z axes motorized) or manual axle delivery. The ideal equipment for all applications - enormously flexible, ergonomic operation with quick start, suitable for the smallest workpieces but also for long test pieces (driving cut) - the ideal solution for the professional (service provider in material testing, contract hardening, ...) and for difficult materials (pulse cutting, etc.) The SERV ...