used REINHARD Dividing Units

Technical data: -Operating temperature adjustable from 80 ° to 300 ° -Interior dimensions approx. B H 1000 x 1200 X 900 mm -mot. Small parts conveyor for feeding with small parts -Utility room 0.88 m³ -Total steam room 1.99 m ³ -Exhaust volume 85 m³/h -maximum amount of solvent 22 Gr. / per batch -Door opening B 1000 x H 1100 mm -Opening flap in the door approx. B 750 x H 270 mm -Power heater 24 kW -Power Fan 4.45 kW -Space requirement approx. B H 2000 x 2900 m. fan x T 1800 mm -Weight approx. 2000 kg -Control settings with or without timer min / hrs / day -Timer -controlled temperature preselection -Temperature display -Emergency - of - buttons

Technical data: -Operating temperature adjustable from 80 ° to 300 ° -Interior dimensions approx. B H 1000 x 1200 X 900 mm -mot. Small parts conveyor for feeding with small parts -Utility room 0.88 m³ -Total steam room 1.99 m ³ -Exhaust volume 85 m³/h -maximum amount of solvent 22 Gr. / per batch -Door opening B 1000 x H 1100 mm -Opening flap in the door approx. B 750 x H 270 mm -Power heater 24 kW -Power Fan 4.45 kW -Space requirement approx. B H 2000 x 2900 m. fan x T 1800 mm -Weight approx. 2000 kg -Control settings with or without timer min / hrs / day -Timer -controlled temperature preselection -Temperature display -Emergency - of - buttons

Specifications: - Operating temperature adjustable from 80° to 300° - Interior dimensions approx. W 1000 x H 1200 x D 900 mm - mot. Small parts conveyor belt for loading with small parts - Usable space 0.88 m³ - Total steam room 1.99 m³ - Exhaust air volume 85 m³/h - permissible solvent quantity 22 gr./per batch - Door opening W 1000 x H 1100 mm - Opening flap in the door approx. W 750 x H 270 mm - Connected value heating 24 kW - Connection value fan 4.45 kW - Space requirement approx.B 2000 x H 2900 m. Fan x D 1800 mm - Weight approx. 2000 kg - Control settings with or without timer Min / h / day - Timer - controlled temperature preselection - Temperature display - Emergency – Off – Button

Working width: 2040mm, max. sheet thickness: 5mm, weight: 3.3t.

Working width: 2000mm, max. sheet thickness: 4mm, connected load: 7.5kW, weight: 3t.

An electric drying oven. Operating temperature: 50°C-250°C, usable space: 2.6m³, heating connection values: 18kW, motors: 0.74kW. On-site inspection is possible.

For the storage and pre-treatment of two-component materials such as polysulphides or silicones etc. There are 3 Reinhardt Technik NF1 freezer available. Years of construction: 1) 2009/2) 2000/3) 1999. min. temperature 1/2/3: -45°C/-25°C/-25°C. Capacity: 18l, container diameter/length: 175mm/1000mm, refrigerant: R 404 A / 15. Dimensions: 910mm/500mm/1150mm, weight: approx. 70kg. Documentation available.

Panel shears Sheet metal scissors used Manufacturer: RAS / REINHARDT Maschinenbau Type: 82.20 Cutting width max. 2040 mm Sheet thickness max. 2 mm 380 V Dimensions approx. 2500 x 1500 x 1100 mm Changes and errors in the technical data, information and prices as well as prior sale reserved.

Automatic saw for cutting wood and cutting out defects., Full optimization: Yes, cutting height: Max. 110 mm, saw motor: 5,5 kW

Guillotine shears Manufacturer: Reinhardt Type: RAS 83.20 Year of manufacture: not specified New control system in 2023 Cutting length: 2,040 mm Back gauge: 750 mm Thickness: Sheet steel: 3 mm Stainless steel: 2 mm Aluminum: 4 mm Weight: 2,050 kg Accessories: Incl. spare blade

Swivel bending machine Manufacturer: Reinhardt Type: RAS 67.20 Year of manufacture: not specified Sheet width: 2,040 mm Sheet thickness: 3.5 mm Weight: 2,900 kg

Round bending machine 3-roll Manufacturer: Reinhardt Type: RAS 40.10 Year of manufacture: not specified Sheet width: 1,020 mm Sheet thickness: 1.25 mm Weight: 175 kg

Guillotine shears Manufacturer: Reinhardt Type: RAS 82.12 Year of manufacture: not specified Cutting length: 1,250 mm Sheet thickness: 2.25 mm Weight: 830 kg

Cross-cut saw, optimisation saw Make: Reinhardt Model: Quickstop QS 160 P Year of construction: 1992

- chainsaw REINHARDT NC 800 H ECONOMY LINE _ suction cup JOULIN REINHARDT NC 800 H crosscut saw cutting width 800mm computer for flow optimization saw motor 6.3 kw -blade diameter 500 mm variable feed speed 120m/min max - power 3.5 kw hydraulic power unit 1.5 kw motorized infeed rollers 2x5000mm 2 cutting positions: wide 800mm - narrow 150 mm right or left ejector rollers 2x2500mm total line length 17m VENTOUSE JOULIN 500TS on heavy-duty HEB 260 gantry crane 6.30X6.30M 2 gripping stations machines available

Description: Technical data: throat 600 mm, the punching spindle nut - table 30-380 mm, table surface 820 × 820 mm, speeds of the milling spindle 9000/18,000 rpm, serial number 3008, voltage 380 V, without CE certificate Approx. Onsite Dimension. (l x w x h): 900 x 1,400 x 2,100 mm, weight approx.: 500 kg

For melting and curing powder-coated parts, as well as drying and baking painted parts, max. charge weight: 500kg, operating temperature: 100-320°C, calorific value: 10kWh/m³, heating capacity: 90kW, internal dimensions: 2500x1200x1850mm, volume: 5.55m³, connected load: 8.075kW, length: 3800mm, width: 2700mm, height: 3100mm, with instruction manual, without spare parts or accessories.

A rotational molding machine consisting of 2 rotational units and an oven in between. Rotation unit: Weight: 7500kg, weight with load: 11500kg, on 8 350mm x 350mm base plates. Rotation unit diameter: 3300mm. Compressed air nozzles: Pneumatic connection: 1inch, water connection: 0.5inch, 6bar, height: 1500mm. Oven: Dimensions X/Y/Z: approx. 5800mm/4200mm/6800mm, weight: approx. 27000kg, max. temperature: 400°C. Documentation available.

Clamping head VEB Vorrichtungsbau WeißENFELS Type G2 Direct dividing apparatus, partial head, dividing apparatus with collet holder Order No: 31202 Fixture No: TGL 30-07101 Collet holder 163E Height 140 mm Through hole 28 mm Clamping surface 265 x 165 mm - Index detent from 0 to 180 every 15 (12x)- Index detent from 180 to 360 every 45 (4x) - Collet set with 16 pieces Compression collets type 163E - 12 pieces Collets round 6 / 8 / 10 / 12 / 14 / 16 / 18 / 20 / 22 / 24 / 26 / 28 mm- 3 pieces Collet hexagon 8 / 10 / 14 mm- 1 piece collet square 12 mm- clamping surface with 20 mm guide groove Dimension dividing apparatus L x W x H 265 x 230 x 140 mm Weight: kg good condition; used

Tools of a groove drawing machine Stuhlmann With partial apparatus - residual stock tool Part apparatus of a groove drawing machine Stuhlmann, without tool cabinet! With residual stock of tools according to photos.

4. Axis incl. control for: milling, grinding, testing/measuring; Engrave IDEAL also for "machines in training" Specifications: Center height: 110 mm Spindle nose: HSK 63 taper, outer ø 70 mm 0/-0.005 mm Clamping torque: 250 Nm Concentricity and axial runout: 0.006 (optional: 0.003 mm or 0.002 mm) Transport load max.: (limited by motor) without support: 40 kg (only if turntable is screwed down) with support: 80 kg Total weight, approx.: 25 kg Execution: - Stepper motor - motor-dependent, backlash-free timing belt drive including correct preload - With automatic spindle clamping with 6bar compressed air - Fully sealed IP 67 - Sensors with light-emitting diodes, data logger and microprocessor, e.g. for status monitoring and display - Service display - Data history for root cause analysis - Remote diagnostics - Axis signals 'Limit+ / Limit -' (e.g. for swivel axis)  ...

Tip height: 180 mm Diameter: 240 mm Space requirement: approx. 1550 x 400 x 350 mm Motor: GOULD Permanent Magnet Servomotor Type: M23Y-Y60Y-900N-TH Encoder ROD 426 – 2000 Condition: very good (used) About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH, is a freelance specialist for SHW machine tools. Our main task is in the field of machine tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control modernizations. Performances: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization

Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine, finishing unit, buffing unit -Manufacturer: Homag, 3 milling units and 2 buffing units from the BRANDT KS 25 edge banding machine -Buffing units: Motor KMER 0.18 kW 1360 rpm -Polishing roller: Ø 145 mm, height and depth adjustable / swiveling -Milling units: Motor Perske / Homag, see photos on nameplates -Voltage: 220 V / 200 Hz -Price / fee: complete -Dimension total. 1200/800 / H590 mm -Total weight: 243 kg

Horiontaler Round Table, probably unused - with bearing traces Bearing traces are easy to remove, Geraet fully ready for use without restrictions! Diameter 500mm Partial installation via sub-discs, indirect division Geraet immediately available. Special price

Daub Model: DV10 bun divider / rounder Serial: 62 Daub semi automatic bun divider rounder For dividing and rounding rolls, 36 divisions at a time, 3 phase, 3 moulding plates