Category: 102 lathes / Turning Machines (Lathes) And Turning Automatics
Latest update: 24.10.2023 add to watchlist
approved
dealer
item-No.: 134158367

used

check Seller: Catalano Werkzeugmaschinen AG
Location: 6260 Reiden, Bodenachermatte 1 Land-ch

add to watchlist

-Digital display Fagor. -Accessories available. Tip height 200 mm Top width 800 mm Turning diameter over slide/bed 240/425 mm Length of the bend of the Planscheibem with 4 JAWS 180 mm Spindle bore 51 mm Inner cone 60 metric Recording camlock D6 " Speed 45-2240 Rev/min The lead screw pitch 6 mm Tailstock spindle mount MT 4 Diameter of tailstock Quill 70 mm Quill: 200 mm stroke Feeds: Along 0.05 2.8 mm / Rev Plan 0.05 2.8 mm / Rev Rapid traverse: LW Thread pitches: Metric 0.5 14 mm English 2-56 U/1 " Module 0.125 3.5 Motor 380 Volt, 12.5 HP Machine dimensions: B x T x H 2400 x 1200 x 1800 mm Weight 2100 kg

Category: 102 lathes / Turning Machines (Lathes)
Latest update: 24.10.2023 add to watchlist
approved
dealer
item-No.: 13800489

used

check Seller: Catalano Werkzeugmaschinen AG
Location: Land-ch

add to watchlist

Tip height 300 mm Top width 2000 mm Spindle speeds 16-1120 U/min Dimensions L/W/H 3750/1100/1400 mm Weight approx. 2500 kg

Category: 102 lathes / Turning Machines (Lathes)
Latest update: 24.10.2023 add to watchlist
approved
dealer
item-No.: 25084377

used

check Seller: Catalano Werkzeugmaschinen AG
Location: Land-ch

add to watchlist

Accessories available Tip height 300 mm Top width 2000 mm Spindle speeds 16-1120 RPM Dimensions L/W/H 3750/1100/1400 mm Weight approx. 2500 kg

Category: 102 lathes / Turning Machines (Lathes)
Latest update: 24.10.2023 add to watchlist
approved
dealer
item-No.: 146466785

used

check Seller: Catalano Werkzeugmaschinen AG
Location: 6260 Reiden Land-ch

add to watchlist

Peak height 200 mm Tip width 1500 mm Turning- over slide 235 mm over bed 425 mm via kröpfung 470 mm Speed Continuous 45 - 2240 rpm Spindle bore 45 mm • the Reitstockpinole 55 mm Morse cone of the spindle and tailstock MK 4

Category: 102 lathes / Turning Machines (Lathes)
Latest update: 24.10.2023 add to watchlist
approved
dealer
item-No.: 146932774

used

check Seller: Catalano Werkzeugmaschinen AG
Location: 6260 Reiden Land-ch

add to watchlist

- Digital display - Accessories available. Peak height 200 mm Peak width 800 mm Turning- over slide 235 mm over bed 425 mm Speed 36 - 1780 rpm Recording Camlock 6 Spindle bore 45 mm Flat and longitudinal feed 0.05 - 2.8 mm/U • the Reitstockpinole 55 mm Morse cone of the spindle and tailstock MK 4 Spindle motor 8 hp

Category: 102 lathes / Bench Lathes For Precision Mechanics
Latest update: 27.02.2024 add to watchlist
approved
dealer
item-No.: 162185671

used

check Seller: ARSPT GmbH
Location: 4435 Niederdorf Land-ch

add to watchlist

Universal lathe Reiden S250 completely overhauled incl. accessories Preloved lathe in excellent condition has been completely overhauled incl. gearboxes etc. and is sold with some accessories (several bezels, three-jaw lining, etc.). Guides have been completely re-scraped, etc. Machine works and can be visited. We have to give away various accessories free of charge, as we have no use for them after the sale. Lathe has a crank to increase the turning diameter, e.g. when overtightening rims, etc. • Turning diameter above the bed up to 540 mm • Center height 250 mm • Distance between centers 2500 mm • Turning diameter above the face slide 310 mm • Turning diameter in offset 630 mm • Spindle speeds 16 - 1120 rpm • Dimensions L/W/H 3750/1100/1400 mm • Spindle bore 42 mm • Weight approx. 3500 Kg

Category: 102 lathes / Turning Machines (Lathes)
Latest update: 19.03.2024 add to watchlist
approved
dealer
item-No.: 163609590

used

check Seller: Catalano Werkzeugmaschinen AG
Location: 6260 Reiden Land-ch

add to watchlist

- Digital display Heidenhain - Accessories available Center height 200 mm Center width 1000 mm Turning diameter over carriage/bed 240/425 mm Length of crank from the plank with 4 jaws 180 mm Spindle bore 51 mm Inner cone 60 metric Recording Camlock D6" Speed 45-2240 rpm Lead screw pitch 6 mm Tailstock quill holder MK 4 Diameter of tailstock quill 70 mm Quilles: stroke 200 mm Feeds: Longitudinal 0.05-2.8 mm/rev Flat 0.05-2.8 mm/rev Rapid traverses: Longitudinal Thread pitches: Metric 0.5-14 mm English 2-56 U/1" Module 0.125-3.5 Motor 380 volts, power 12.5 hp Machine dimensions: W x D x H 2400 x 1200 x 1800 mm Weight 2100 kg

Category: 103 milling machines
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 157817210

used

check Seller: Muller Machines SA
Location: Land-ch

add to watchlist

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 900 mm Table width: 300 mm Longitudinal travel (X-axis): 700 mm Transversal travel (y axis): 250 mm Vertical travel (z axis): 370 mm Travel of the upper slide: 400 mm Spindle speeds: number (steps): 12 from: 45 rpm up to: 2000 rpm Taper in spindle: 40 ISO Feeds steps:: 12 longitudinal from: 18 mm/min up to: 800 mm/min transversal from: 18 mm/min up to: 800 mm/min vertical from: 7.2 mm/min up to: 320 mm/min Rapid traverse: longitudinal: 2.5 m/min transversal: 2.5 m/min vertical: 1.0 m/min Voltage 50 Hz 3x: 380 Volt Motor output: 6 HP Machine´s weight about: 1900 kg Overall dimensions machine: Length: 2000 mm Width: 1600 mm Height: 1700 mm Various accessories: Digital readout number of axis:: 3

Category: 103 milling machines
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 157817211

used

check Seller: Muller Machines SA
Location: Land-ch

add to watchlist

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 1100 mm Table width: 300 mm Longitudinal travel (X-axis): 700 mm Transversal travel (y axis): 250 mm Vertical travel (z axis): 470 mm Travel of the upper slide: 400 mm Spindle speeds: number (steps): 12 from: 45 rpm up to: 2000 rpm Taper in spindle: 40 ISO Feeds steps:: 12 longitudinal from: 18.0 mm/min up to: 800 mm/min transversal from: 18.0 mm/min up to: 800 mm/min vertical from: 7.2 mm/min up to: 320 mm/min Rapid traverse: longitudinal: 2.5 m/min transversal: 2.5 m/min vertical: 1.0 m/min Voltage 50 Hz 3x: 380 Volt Motor output: 6.0 HP Machine´s weight about: 1900 kg Overall dimensions machine: Length: 2000 mm Width: 1600 mm Height: 1700 mm Various accessories: Digital readout number of axis:: 3 Manufacturer: Mitutoyo Coolant system La ...

Category: 103 milling machines
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 157817557

used

check Seller: Muller Machines SA
Location: Land-ch

add to watchlist

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 1250 mm Table width: 350 mm Longitudinal travel (X-axis): 850 mm Transversal travel (y axis): 250 mm Vertical travel (z axis): 470 mm Table load max.: 400 kg Spindle speeds: number (steps): 12 from: 45 rpm up to: 2000 rpm Taper in spindle: 40 ISO Feeds steps:: 12 longitudinal from: 18 mm/min up to: 800 mm/min transversal from: 18 mm/min up to: 800 mm/min vertical from: 7.2 mm/min up to: 320 mm/min Rapid traverse: longitudinal: 2.70 m/min transversal: 2.75 m/min vertical: 1.10 m/min Voltage 50 Hz 3x: 380 Volt Motor output: 10 HP Total power required: 7 HP Machine´s weight about: 1950 kg Overall dimensions machine: Length: 2000 mm Width: 1700 mm Height: 2000 mm Various accessories: Set of toolholders Lamp

Category: 103 milling machines
Latest update: 09.10.2023 add to watchlist
approved
dealer
item-No.: 123413955
New in: 1974

used

check Seller: AUER
Location: A - Oberösterreich Land-at

add to watchlist

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Table length: 1250 mm Table width: 350 mm Longitudinal travel (X-axis): 850 mm Transversal travel (y axis): 250 mm Vertical travel (z axis): 470 mm Table load max.: 400 kg Spindle speeds: number (steps): 12 from: 45 rpm up to: 2000 rpm Taper in spindle: 40 ISO Feeds steps:: 12 longitudinal from: 18 mm/min up to: 800 mm/min transversal from: 18 mm/min up to: 800 mm/min vertical from: 7.2 mm/min up to: 320 mm/min Rapid traverse: longitudinal: 2.70 m/min transversal: 2.75 m/min vertical: 1.10 m/min Voltage 50 Hz 3x: 380 Volt Motor output: 10 HP Total power required: 7 HP Machine´s weight about: 1950 kg Overall dimensions machine: Length: 2000 mm Width: 1700 mm Height: 2000 mm Various accessories: Set of toolholders Lamp

Category: 103 milling machines
Latest update: 24.10.2023 add to watchlist
approved
dealer
item-No.: 5450155

used

check Seller: Catalano Werkzeugmaschinen AG
Location: Land-ch

add to watchlist

Description Digital display (3 axis) Technical data: 1100 X 300 mm clamping surface Longitudinal stroke 700 mm Transverse stroke 250 mm Vertical lift 470 mm Spindle speeds 45-2000 RPM. Recording ISO 40 12 Milling feed longitudinal and transverse 18 800 mm / min. vertical 7.2 320 mm / min. The milling spindle 7 HP drive motor Drive motor of 1.5 HP table Machine weight 2050 kg

Category: 103 milling machines
Latest update: 24.10.2023 add to watchlist
approved
dealer
item-No.: 5450159

used

check Seller: Catalano Werkzeugmaschinen AG
Location: Land-ch

add to watchlist

Description Digital display (3 axis) Technical data: 1100 X 300 mm clamping surface Longitudinal stroke 700 mm Transverse stroke 250 mm Vertical lift 470 mm Spindle speeds 45-2000 RPM. Recording ISO 40 12 Milling feed longitudinal and transverse 18 800 mm / min. vertical 7.2 320 mm / min. The milling spindle 7 HP drive motor Drive motor of 1.5 HP table Machine weight 2050 kg

Category: 103 milling machines
Latest update: 24.10.2023 add to watchlist
approved
dealer
item-No.: 6100384

used

check Seller: Catalano Werkzeugmaschinen AG
Location: Land-ch

add to watchlist

1100 X 300 mm clamping surface Longitudinal stroke 700 mm Transverse stroke 250 mm Vertical lift 470 mm Spindle speeds 45-2000 RPM. Recording ISO 40 12 Milling feed longitudinal and transverse 18 800 mm / min. vertical 7.2 320 mm / min. The milling spindle 7 HP drive motor Drive motor of 1.5 HP table Machine weight 2050 kg

Category: 103 milling machines
Latest update: 24.10.2023 add to watchlist
approved
dealer
item-No.: 6101362

used

check Seller: Catalano Werkzeugmaschinen AG
Location: Land-ch

add to watchlist

1100 X 300 mm clamping surface Longitudinal stroke 700 mm Transverse stroke 250 mm Vertical lift 470 mm Spindle speeds 45-2000 RPM. Recording ISO 40 12 Milling feed longitudinal and transverse 18 800 mm / min. vertical 7.2 320 mm / min. The milling spindle 7 HP drive motor Drive motor of 1.5 HP table Machine weight 2050 kg

Category: 103 milling machines / Milling Machines
Latest update: 24.10.2023 add to watchlist
approved
dealer
item-No.: 25879341

used

check Seller: Catalano Werkzeugmaschinen AG
Location: Land-ch

add to watchlist

-Digital display -Accessories available. Clamping surface 1100 x 300 mm Longitudinal stroke 700 mm Transverse stroke 250 mm Vertical lift 470 mm Spindle speeds 45-2000 RPM. Recording ISO 40 12 milling feed longitudinal and transverse 18 800 mm / min. vertical 7.2 320 mm / min. The milling spindle 7 HP drive motor Drive motor of 1.5 HP table Weight of the machine CA. 2050 kg

Category: 103 milling machines
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 158218355

used

check Seller: Mach4metal
Location: Land-nl

add to watchlist

Key data: 12550 , 350 , 850

Table length: 12550 mm Table width: 350 mm Longitudinal X: 850 mm Cross Y: 250 mm Vertical Z: 470 mm Make: Reiden Swiss Type: FU 150 YOP: 1980 3 Axis digital read out Rapid feed all 3 axis Power 5kW X-Axis:         850mm Y-Axis:         250mm Z-Axis:         470mm Table Length:   1.250mm Table Width:    350mm Table load:     400Kg Spindle speeds: 2000Rpm Feed rate X-Axis:2.700mm/min. Feed rate Y-Axis:2.750mm/min. Feed rate Z-Axis:1.100mm/min. Length:         2.000 mm  Width:          1.700 mm  Height:         2.000 mm  Weight:         2.000 kg 

Category: 103 milling machines / Milling Machines
Latest update: 17.01.2024 add to watchlist
approved
dealer
item-No.: 92398457

used

check Seller: Catalano Werkzeugmaschinen AG
Location: Land-ch

add to watchlist

Digital display Anilam Table 1250 x 350 mm Longitudinal path 850 mm Crosspath 250 mm Vertical path 470 mm Spindle speeds 45 - 2000 rpm. Recording ISO 40

Category: 103 milling machines
Latest update: 09.10.2023 add to watchlist
approved
dealer
item-No.: 123413954
New in: 1974

used

check Seller: AUER
Location: A - Oberösterreich Land-at

add to watchlist

Vertical frause reiDEN VF350-3D, table 1750 / 400 mm, 1250 / 300 / 450 mm

Category: 109 other metal working machines
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 156642444
New in: 1985

used

Location: Land-de

add to watchlist

x-travel: 1200 mm y-travel: 700 mm z-travel: 750 mm Control: Heidenhain type: TNC 151 table surface area: 1200x630 mm spindle taper ISO: 50 turning speeds: 20-2900 U/min milling-head swivable +/-: total power requirement: kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 103 milling machines / Bed Milling Machines
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 156966186
New in: 1985

used

Location: Land-de

add to watchlist

x-travel: 3000 mm y-travel: 1000 mm z-travel: 800 mm Control: Heidenhain TNC 155 table surface area: 3200x1000 mm number of T-slots: 9 0: 100 mm T-slot - width: 22 mm milling-head swivable +/-: 180 ° spindle motor: 30 kW turning speeds: 20-2500 U/min Feed: 2-6000 mm/min total power requirement: 38,5 kW weight of the machine ca.: 16,500 t dimensions of the machine ca.: 7,5x3,55x3,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 103 milling machines
Latest update: 30.08.2023 add to watchlist
approved
dealer
item-No.: 157817551

used

check Seller: Muller Machines SA
Location: Land-ch

add to watchlist

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 155P Operating hours: 3100 Technical data Table length: 1000 mm Table width: 560 mm Table load max.: 1000 kg Longitudinal travel (X-axis): 1000 mm Transversal travel (y axis): 500 mm Vertical travel (z axis): 550 mm Distance from spindle to table: 100 - 650 mm Taper in spindle: 40 ISO Spindle speeds: stepless from: 20 rpm up to: 3100 rpm Feeds: longitudinal from: 2 mm/min up to: 2000 mm/min transversal from: 2 mm/min up to: 2000 mm/min vertical from: 2 mm/min up to: 2000 mm/min Rapid traverse: longitudinal: 10 m/min transversal: 10 m/min vertical: 10 m/min Vertical quill travel: 80 mm Voltage 50 Hz 3x: 380 Volt Milling spindle motor: 11 kW Feed motor: 2.9 kW Machine´s weight about: 5500 kg Overall dimensions machine: Length: ...

Category: 101 boring mills and machining centers
Latest update: 30.08.2023 add to watchlist
approved
dealer
ankerimg
item-No.: 160723518

used

Location: Land-nl

add to watchlist

Table length: 800 mm Table width: 800 mm Longitudinal X: 1200 mm Cross Y: 600 mm Vertical Z: 700 mm Positions ATC: 72   Positions APC: 0   CNC Brand: Heidenhain CNC Model: HeidenHain iTNC 530 X - Travel:               1200mm Y - Travel:               600mm Z - Travel:               700mm A - Axis:                 - 180 to + 180° B - Axis:                 - 90 to + 90° Table load:               800 Table  Ø:                 800mm Feed rate X-Axis:         20000mm/min. Feed rate Y-Axis:         20000mm/min. Feed rate Z-Axis:  ...

Category: 102 lathes / Engine Lathes (Sliding, Surfacing And Screw Cutting Lathes)
Latest update: 29.03.2024 add to watchlist
approved
dealer
item-No.: 162179816
New in: 1978

used

check Seller: Marcels Maschinen AG Schweiz
Location: Schweiz Land-ch

add to watchlist

turning diameter over bed: 425 mm centre height: 200 mm centre distance: 1500 mm turning diameter over slide rest: 235 mm turning dia. in gap: 470 mm spindle bore: 45 mm camlock: D6 lead of leadscrew: 6 mm tailstock quill taper MT: 4 diameter of quill: 55 mm quill stroke: 160 mm weight of the machine ca.: 1.5 t number of spindle speeds: 36-2240 Digital read-out Misc accessories More details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Category: 201 saws / Belt saws
Latest update: 09.01.2024 add to watchlist
approved
dealer
item-No.: 162806185

used

check Seller: MATEC system + technik GmbH
Location: Land-ch
Price: 2.300 € add to watchlist

Band Saw Reiden heavy-duty version The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)
Banner ad information  
REIDEN 3rd category level
  • REIDEN bed milling machines (1)
  • REIDEN belt saws (1)
  • REIDEN bench lathes for precision mechanics (1)
  • REIDEN engine lathes (sliding, surfacing and screw cutting lathes) (1)
  • REIDEN milling machines (2)
  • REIDEN processing centers (1)
  • REIDEN turning machines (lathes) and turning automatics (1)
  • REIDEN universal milling machines (1)
  • REIDEN universal processing centres (2)
 
RESALE used machinery 25 years online