We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket projection 210 mm with punching tool -Punching capacity: 3mm -Matrix: Ø 34 mm -Punching tool: Ø 10 mm -Dimensions: 320/45/H150 mm -Weight: 6.8 kg
used
Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket type 25 BL 160 -Throw: 110 mm -Punching capacity: 3mm -Matrix: Ø 43 mm -Dimensions: 225/60/H150 mm -Weight: 6.6 kg
used
Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket type 25 BL 260 with punching tool -Throat: 210 mm -Punching capacity: 3mm -Matrix: Ø 42 mm -Punching tool: Ø 18 mm -Dimensions: 330/60/H150 mm -Weight: 9.4 kg
used
RASKIN RT 64-2 punching machine manufactured in Switzerland in 1981, is designed for precise punching of holes in workpieces made of e.g. stainless steel, with a force of 30 tonnes. Technical parameters of the RASKIN RT 64-2 punching machine - maximum press force: 30 t - CNC control - number of strokes: 400/min - power supply of machine RT 64: 3x 380 V; 50 Hz
used
Punching units, punching unit, punching bracket, punching tool, non-driven notching and shearing units, forming bracket, for notching machine, sheet metal notching machine, notching shear, corner notching machine, corner shear, corner shear -Manufacturer: Raskin, punching unit type 125 NIA 111.163.0 -Punching capacity: 3mm -Dimensions: see photos -Dimensions: 270/200/H150 mm -Weight: 30.5kg
used
Key data: 3 mm
Notching unit RASKIN 125 x 125 x 3 mm Shipping within Germany possible !
used
RT 105 Manufacturer: RASKIN / RT 105 Weight approx.: 13000 kg Tool stations in magazine : 20 Traverse paths: 1050x2560 mm CNC sheet metal punching machine, year 1990, only 2135 h Control Raskin CNC 504
used
Capacity: 300 ton Passage between uprights: 720 mm Stroke: 500 mm Table: 600 x 600 mm Power: 25,8 kW Length: 2700 mm Depth: 1400 mm Height: 2200 mm Height: 2700 mm Weight: 11 ton
Raskin Master 50 ton Capacity: 50 ton Deph of throat: 240 mm Max adjustable stroke: 10 > 80 mm Distance between table -- ram: 360 mm Table area: 650 x 500 mm Electric motor (power): 5,5 HP Weight: 2350 kg
used
pressure:150 t throat:450 mm stroke:115 fix mm no. of strokes:45 /min distance table/ram, max. stroke up, adjustment up:400 mm table surface area:2250 x 1090 mm table height over floor:900 mm passage to the back:1900 mm ram surface:1900 x 900 mm ram adjustment:100 mm power requirement:16,0 kW weight:19,5 t Dimensions (WxDxH):3,0 x 2,3 x 3,9 m
used
Stanze PAGUS Stanze punching force approx. 4000 kg installation height approx. 200 mm projection: approx. 380 mm table 300 x 300 mm 380 V used, tested ! Dimensions: 1000 x 920 x 1550 mm
used
Punching tool with Linar built-in punching brackets ABS-SCHWABE type 100/160 11 punching brackets, punching unit Year of construction approx. 1990 Projection: 160 mm Punching capacity: 0.3 to 5 mm Material thickness Hole diameter: 2 to 7 mm Installation height: 203 mm (only the punching bracket individually with punching tool) Built-in is a round hole tool ø 5 mm Punching bracket spacing: 195 mm - the tool unit was mounted on a hydraulic press brakeDimensions of punching bracket base plate L x W x H: 2500 x 345 x 37.5 mm Dimensions of punching bracket pressure plate L x W x H: 2500 x 173 x 20 mm Overall dimensionsL x W x H: 2500 x 345 x 300 Weight: 400 kg good condition; used
used
Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: SUPRA, punching bracket GN4 type PA80 400 with punching tool -Throat: 400 mm -Punching capacity: mm -Matrix: Ø 75 mm -Dimensions: 570/120/H140 mm -Weight: 27.6 kg
used
unknow A9020411 (12-14)-
used
Operator Panel
used
unknow GE.570205.0002.00, part of the set-
used
Main Rack
used
BARCO HULPFUNCTIE 16 DIG OUTP
used
BARCO FLOPamp;KBRD INTF MNC95
used
Year 1996, CE norm, complete instructions, control Delem, machine in TOP condition with warranty, more details on request
used
used
used
Punching machine EDEL - Maximum power: 25to. - Extension 26 cm - Height: 170cm - Width: 65cm - Depth: 50cm Good condition fully functional can be visited and tried out on site. Shipping abroad. Visit: Basically, I would like to point out to you that in order to avoid misunderstandings, the article can be viewed before purchase and tested under electricity. Please ask questions before purchasing to avoid any ambiguity. If you have any general questions or make an appointment for a visit, I can be reached at any time, using the telephone number below or above. Errors in the description and intermediate sale reserved. The VAT is shown separately on my invoices. Shipping with forwarding.
used
Punching machine Trumpf TruMatic TC3000-1300 FMC Year of construction 2004 87500 hours (03.2021) In this case, the configuration : TruMatic TC3000-1300 FMC Year of construction 2004 Working range : 2550 x 1280 mm Standard: • Sturdy C-frame • Coordinate guidance with integrated linear magazine, 21 seats for tools and clamps • 2 clamps • Drives: Maintenance-free digital three-phase servo motors • Punching head: hydraulic system with closed control loop, hydraulic mono tool holder, 360° rotation for all Tools, automatic tool length compensation, programmable scraper movement • Programmable hold-down • Tool spray lubrication • Punch butt suction • Partial slide 500 x 500 mm • Control Bosch PNC-P, activity-oriented user interface, Online Help, Diagnostics, 3.5" Floppy Drive, RJ45 Network Connection • Graphics programming ToPs 2000 • ToP ...
used
CNC punching machine make EDEL type Microcut 211Machine -No: 30287 Year 1998Punching force: 200 kNDirect working area: 1500 x 1000 mmTool size up to: 100 mm diameter, as well as forms: within this circular areaMaterial thickness up to: 4 mmfree passage up to approx. 30 mmWiper system: sprungTool System:: Noble Quick Change ::: Tool head 30x120 / 146x40Total connection value: up to: 16 kVA (400 V, 50 Hz) Protection class: IP54, control voltage 24 V,: DCWidth x depth x height: 3350 x 3750 x 1800 mmWeight: 7500 kgIncl.:- Mechanical and control technology REVO - M Basic equipment for the use of turret tools- ram stroke programmable (instead of manual adjustment)- CNC LOGO and programming with workpiece graphics- 1 set of set-up elements with leveling device- CNC CAD programmer software in standard version- 6-fold Rev. tools- Tools for Rev. Ø 4,2 - Ø 6,5 - Ø 8,5 / right 18x6 wide side fron ...