used RAMPF Concrete block moulds

Paving stone form #5302 Overall dimensions: 1550 x 1300 x 400 mm Weight: 870 kg The paving stones dimension can be seen on the photo. The height of the paving stone what can be produce: 70 mm

Paving stone form #5303 Overall dimensions: 1550 x 1300 x 400 mm Weight: 846 kg The paving stones dimension can be seen on the photo. The height of the paving stone what can be produce: 95 mm

Paving stone form #5304 Overall dimensions: 1550 x 1300 x 400 mm Weight: 781 kg The paving stones dimension can be seen on the photo. The height of the paving stone what can be produce: 90 mm

used concrete block mould for the production of 30 paving stones 8cm

Used concrete block mould for the production of drywall blocks (tongue and groove system) The mould was used on a concrete block machine type Schlosser SV40.

Kitchenette Premium cooking block MKN 370x90x86 cm, composed of: - deep roaster: frying surface 44x56x10 cm, 2 zones switchable 50°C-300 °C, 400 V, 7.2 kW, 14 A, plug 16 A, - Double fryer London II: 2×12 litres, basket size 16x30x11 cm, swivel radiator for easy cleaning, oil drain tap, 400 V, 12 kW, 18 A, plug 32 A - Hob: 2 zones separately switchable, 34×63 cm, 400 V, 6 kW, 9 A, plug 16 A - Bain Marie: 230 V, 3 kW, 12 A - Heating cabinet: 30°C to 110°C, 71x74x33cm - Gas stove 6 flames: set to liquefied petroleum gas 30 kW, with electric oven. 400 V, 5.9 kW, top and bottom heat separately switchable, 50 °C – 300 °C, for 2/1 GN - incl. railing optionally mountable on both sides or on one side for center installation or wall installation, width of the railing incl. spacer 12 cm

Four nearly new moulds for garden wall and fence.

motivated seller Edible Oil PET Preform Mould Cavities: 32 Product 1,5 liters Neck Finish 29mm Working Hours: 43.843 Hours Preform Weight: 41 Grams + Core Set for 36 Grams Husky G-line and X-line compatible

Approx. 50 pieces of press moulds for round elements Dimensions: 1000 mm x 1200 mm

250 ml bottle form set with shampoo nut

Oval Bathtub // 1860 kg; hot-runner-2 points; very good condition ; made by Italy // dimension mould - 800/595/560 mm // dimension Bathtub - 595/395/210 // weight - 540 g

Forms 9 pcs. for the production of Styrofoam Pins A package of professional injection moulds for the production of pins for polystyrene ( 9 pcs. molds from 12-36 sockets ) Name 1 St. 10 / h – 120 mm 12 Cold Channel 2 Wedks 10 / h – 160 mm 12 Cold Channel 3 St. 10 / h – 180 mm 12 Cold Channel 4 Squid 10 / h – 200 and 220 mm 12 Hot channel 5 Squid 10 / h – 240 and 260 mm 12 Hot channel 6 Wed.5 nails /70, 90,120, 140 mm 36 Cold Channel 7 Wed.5 nails /160,180, 200, 220 mm 36 Cold Channel 8 Wed.5 nails /160,180, 200, 220 mm 36 Cold Channel 9 Nail caps 36 Cold Channel

Set-out moulds for production PCV gutter diameter 130 mm for rain water – 17 pcs. Moulds ( made by IFW Austria DERASCON ) (embrace pipe trigger A and B ; jointly ; Holders ;outlet ; Knee ; Corners ; bottoms gutter )

Ties for snowbord // weight - 580 g // 6 pcs. new moulds

Oval openwork Laundry basket // 1860 kg; hot-runner-2 points; Pneumatic servo.; very good codition ; made by Italy dimension mould - 795/595/560 mm // dimension basket - 580/390/240 // weight - 410 g

molds fo caps 1. for glass jars coffe - Caps for glass jars coffe 72 mm and 65 mm - 1500 Euro 2. Saint Gabin - few moulds 6 cav. - 3.000 Euro

Box for cycle - 3 pcs. new moulds price 10.000 Euro

injection molds set for the production of house facade, a total of 4 pcs of large molds with a total weight of 12 tons

3 sets of blowing moulds for KHS SIG Blomax 8: 1 complete set for 330 ml blowing moulds (8 pieces) 1 complete set for 1000 ml blowing moulds (8 pieces) 1 complete set for 1500 ml blowing moulds (8 pieces) Type of the blowing machine Blowing machine KHS / SIG type: BLOMAX 8 III year of manufacturing: 2004 capacity: max. 13.000 bph neck finish: PCO 28 - 1881

Substructure painted Automatic machine with chain drive width: 450 mm Band height: adjustable Spray nozzles: 3 pcs. With pressure control Technically repaired

23 blow moulds for the production of bottles Bottle volume 100 ml to 2 liters German manufacturer, good condition Complete list with all dimensions available!

9 injection moulding tools for the production of rollers - along with a wide range of accessories As a result of a restructuring of our customer, we offer for sale 9 injection molds for the production of various types of castors for furniture and chair castors, including customer addresses. The pictures represent the basic nature of the different roles. These injection molds could be used to set up a complete production facility for the production of rolls. The basic body of the castors can then be supplemented with various inserts (depending on the customer's requirements) for final attachment to the end product, e.g. a chair. This offer also includes the following accessories - which are part of the production process: • 1 x punching tool (for the roller roller) • 1 x press (for pressing the pins and shafts) • 1 x automatic assembly machine for spring washers � ...

Set-out sleeve for quick montage

Aluminium ham moulds, various sizes.

Transport trestle, steel trestle, heavy-duty shelving, steel trestles, heavy-duty trestles, tubular bearing trestle, transport trestle -Steel trestles: pipe bearing trestles / transport frames 2 pieces -Execution: massive steel construction with wooden support -Usage: for storage and transport of heavy round material -Price / fee: complete -Dimensions: 1300/305 / H980 mm -Weight: approx. 206 kg / pc.