We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
used
Ramon 40 liter cutter, 2 speeds, bowl stainless steel, function tested
new
Can make meatballs and burgers up to 130mm in diameter. and height up to 30 mm; – The height can be adjusted; – Equipped with a speed controller; – Limit switch for more tape security; – Motor: 0.3 kW – Single-phase motor – Hopper capacity 24 l. Standard shapes: Round burgers with diameter: 22 mm. 32 mm. 40 mm. 65 mm. 100 mm. 115 mm. 130 mm. Round meatballs with diameter: 22 mm. 32 mm. 40 mm. 65 mm. Depending on the chosen thickness, a different weight of the final product can be achieved with one mold. Accessories: As standard, the machine comes with one mold. As an option, you can also order: Round burgers with a diameter of: 22 mm. 32 mm. 40 mm. 65 mm. 100 mm. 115 mm. 130 mm. Round meatballs with diameter: 22 mm. 32 mm. 40 mm. 65 mm.
used
turning diameter over bed: 450 mm turning length: 1000 mm turning diameter over slide: 232 mm engine output: 10 PS turning speeds: 31 - 1600 U/min weight of the machine ca.: 1,7 t required space: 2,50 x 1,30 x 1,60 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Tailstock, counter bearing for dividing head, dividing attachment -Tailstock comes: from a Ramo a42 lathe -Quill: electrically driven -Motor: 220/380 V 0.18 kW -Spindle stroke: 300 mm -Recording: MK4 -Dimensions: 790/550/H580 mm -Weight: 98 kg
used
Tower with Ramo TPC gantry N°120 DESCRIPTION - Mechanically welded base, - Vertical cast iron bench, - Added slides in 60-62 HRC treated steel, - Fixed headstock with spindle on angular contact ball bearings, - 28 KW DC spindle motor at a reference speed of 2000 mm-1, - Double clamp for clamping parts, incorporated in the spindle, - Tightening of the part by spring, loosening of the part hydraulically, - CNC trolley controlled by SIEMENS motor and ball screw, equipped with a DUPLOMATIC SM-P16/12 indexable turret with 12 C4 stations, - Lubrication of the headstock by air/oil, - MECAFLUID centralized automatic volumetric lubrication of all moving parts of the machine, - Chip protector with closing and locking safety contact, - 220 V lighting - Watering controlled by solenoid valves, - SIEMENS 840D command director, color console on pivoting console, - Chip conveyor, disc ...
used
RAMO tower with TPC gantry No. 119 DESCRIPTION - Mechanically welded base, - Vertical cast iron bench, - Added slides in 60-62 HRC treated steel, - Fixed headstock with spindle on angular contact ball bearings, -28 KW DC spindle motor at the reference speed of 2000 mm-1, - Double clamp for clamping parts, incorporated in the spindle, - Tightening of the part by spring, loosening of the part hydraulically, - CNC trolley controlled by SIEMENS motor and ball screw, equipped with a DUPLOMATIC SM-P16/12 indexable turret with 12 C4 stations, - Lubrication of the headstock by air/oil, - MECAFLUID centralized automatic volumetric lubrication of all moving parts of the machine, - Chip protector with closing and locking safety contact, - 220 V lighting - Watering controlled by solenoid valves, - SIEMENS 840D command director, color console on pivoting console, - Chip conveyor, ...
used
Vacuum machine Manufacturer: Ramon Model: VP 1000 Totally manufacured in AISI 304 stainless steel Double sealing Digital control panel Pneumatic sealing Easy disassembly of sealing bars Equipped with polyethylene for faster packaging and easier bag placement Easy maintenance Dimensions: 110x70x105cm Electrical power: 2.2kW Voltage: 400 V/ 3ph/ 50 Hz
used
Description: Number of axles: 2 pieces Distance between centers: 750 mm Turning diameter over bed: 420 mm Spindle clearance: 42 mm Tailstock type: manual Type of tailstock attachment: CM4 Universal thread cutting gear: Yes Number of spindle speeds: 18 Supply voltage: 400 V Approx. Onsite Dimension. (l x w x h): 1,900 x 880 x 1,200 mm, weight approx.: 1,875 kg
used
Ramondin S.A. bottle sleever, machine number: 127, belt width: 80, dimensions: 2650 mm x 1000 mm x 1900 mm. Without belt
used
Description: Abrasive Belts Different types: 5 units P80 10 units 240 7 units P100 3 units P60 Approx. Onsite Dimension. (l x w x h): 1,750 x 600 x 1,600 mm, weight approx.: 40 kg
used
Tip height: 330 mm centre distance: 1500 mm circular diameter: bed 690 mm spindle bore: 82 mm spindle retainer: short taper size 8 taper tailstock: 6 MK spindle speed: 7.1-1400 rpm feeds: longitudinal/plan 0.05 112/0.025 56 mm / U thread pitches: 0.25-560 mm electrical connection: 380 V, 15 kW space: 3350 x 1800 x 1400 mm weight: 4800 kg
used
Tip height: about quilt 300 mm centre distance: 1500 mm circular diameter: upper bed 640 mm spindle bore: 67 mm spindle retainer: Gr. 8 taper tailstock: 5 MK spindle speed: 18 - 900 rpm feeds: longitudinal/plan 0.063 0.032 2.1 mm / U thread pitches: 0.5-14 mm electrical connection: 380 V, approx. 7.5 kW space: 1550 x 3100 x 1250 mm weight: approx. 3500 kg hardly used and therefore well-preserved bed lathe
used
Tip height: 107 mm top width: 350 mm circular diameter: bed 200 mm spindle bore: 25 mm taper tailstock: 2 MK spindle speed: 35 - 3500 rpm feeds: longitudinal and mm/U thread pitches plan: 0.2-3 mm electrical connection: 380 V, approx. 2.2 kW space: 600 x 1300 x 1230 mm weight: 850 kg
Heavy Duty Lathe POREBA Model: TCA 160 /12000 Condition: Excellent, ready to work Year of manufacture: 1963 Complete Offer includes a lot of equipment Technical details : Control: Manual High of centrem over the flat way: 800 mm High of centres over the floor: 1 600 mm Swing over carriage: 1 280 mm Diametre of 4-jaws chuck: 1 600 mm Distance between centres: 12 000 mm Load carrying capacity without steady: 30 000 kg Load carrying capacity with 1 steady: 35 000 kg Load carrying capacity with 2 steady: 40 000 kg Equipment: - head for grinding 2 psc. - constant's lunette 3 psc. - mobile lunette: 1 psc. - milling head 1 psc. - carriages 2 psc. - change gear set, etc
used
digital display swingdiameter over bed 800 mm swingdiameter over slide 600 mm distance between center 2000 mm spindle speed750 1 / min multifix tailstock
new
TH 3309 Control and spindle lathe Fixed bezel D = 19-70 mm Revolving bezel D = 16-50 mm LED machine lamp Reduction sleeve MK 3 / MK 5 Motor protection switch Emergency stop foot operated Engine: 400V 1, 5 kW 50 Hz Tip height 156 mm Top width 830 mm Spindle speed 60 - 2000 min-1 16 levels Spindle cone MK 5 Spindle bore D = 38 mm Weight 430 kg Dimensions Lxwxh: 1685 x 745 x 1320 mm G & PIECES 3402030
new
Made in Italy machine according to DIN 8606 Tip height: 260 mm Turning diameter over bed: 520 mm Swing over carriage: 300 mm Centre distance: 1500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (24) 9-1600 rpm (option 11-2000 U/min) Engine output: 5.5 kW (option: 7.5 kW) feed Z-axis: (93) 0.028 6.43 mm / Rev Feed x axis: (93) 0.012 2.73 mm / Rev Thread, metric: (54) 0.5-224 mm Thread, Witworth: (55) 72 - 1/8 TPI Thread, module: (54) 0.5-112 mm Thread, Diametral Pitch: (54) 64 - 1/4 D.P.. Cross slide Lxw: 650 x 230 mm Transversal carriage stroke: 340 mm Upper carriage Lxw: 350 x 150 mm Upper carriage stroke: 150 mm Tailstock Quill diameter: 85 mm Tailstock Quill stroke: 200 mm Tailstock taper: MK 5 Weight: 3,100 kg Facilities: -Movement of the tailstock pneumatically supported -Acceptance Protocol according to DIN 8605, ...
new
Made in Italy machine according to DIN 8605: lathe with increased accuracy. Tip height: 215 mm Turning diameter over bed: 430 mm Swing over carriage: 240 mm Top width: 1,000 mm Bed width: 290 mm Spindle bore: 52 mm Spindle nose: Camlock 6 " Spindle speeds variable: 6 Spindle speeds: 60-2,000 rpm S6/S1 engine power: 4 kW (option: 5.5 kW) feed Z-axis: (38) 0.05 - 1.88 mm / Rev Feed x axis: (38) 0.02 1,084 mm / Rev Thread cutting, metric: (30) 0.45-20 mm Thread cutting, Witworth: (35) 80-1 3/4 TPI Thread cutting, module: (25) 0.25-10 mm Thread cutting, Diametral Pitch: (30) 160-3 1/2 D.P.. Cross slide Lxw: 370 x 190 mm Transversal carriage stroke: 240 mm Upper carriage Lxw: 275 x 115 mm Upper carriage stroke: 120 mm Tailstock Quill diameter: 60 mm Tailstock Quill stroke: 135 mm Tailstock taper: MK 4 Weight: approx. 2,000 kg Facilities: -Infinitely variable ...
used
Working condition Complete electrics Yom: 1990 Technical details: Swing over bed: 2500 mm Turning length: 12 500 mm (The whole length of bed 15 700 mm) we can also make the extension of the needed workpiece weight: 120 tons bed width: 2 900 mm machine weight: 120 tons
used
Made in Italy Peak: 300 mm Rotary diameter over bed: 600 mm Rotary diameter via sled: 380 mm Peak: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (12) 16-1200 U/min Engine power: 9.2 kW (special equipment/standard: 7.5 kW) Reprimor Z-axis: (93) 0.028-6.43 mm/U Feed X-axis: (93) 0.012-2.73 mm/U Thread, metric: (54) 0.5-224 mm Threads, Witworth: (55) 72-1/4 x8 TPI Thread, module: (54) 0.5-112 mm Threads, Diametral Pitch: (54) 64 -1/4 D.P. Crossleigh hub: 340 mm Oberslitten hub: 150 mm Riding stock pinol diameter: 85 mm Riding stove pinol stroke: 200 mm Ridstock cone: MK 5 Weight: About 3,200 kg Facilities: -3-axis digital display -Step-by-step speed adjustment -Automatic lubrication of the management railways -LED lighting -Micrometer bed strike -9.2 kW engine instead of 7.5 kW -Quick change holder system mul ...
new
Tip width: 700 mm Tip height: 150 mm Circulation diameter over bed: 300 mm Bed width: 180 mm Spindle bore: 38 mm Mounting in the spindle bore: MK 5 Speed range, infinitely variable: 30 - 450 / 150 - 3000 rpm Range of longitudinal feeds: (14) 0.07 - 0.65 mm/U Area of plan feeds: (11) 0.03 - 0.12 mm/U Metric threads: (18) 0.2 - 3.5 mm Inch Thread: (21) 8 - 56 Gg/1" Pinole path: 85 mm Pinole holder: MK 3 Engine power S1 100%: 1.5 kW / 400 V Motor recording power S6 40%: 2.2 kW / 400 V Machine dimensions (W x D x H)*: 1380 x 640 x 500 mm Weight approx.: 235 kg * without base Delivery: - Digital display - 3-jaw chuck PO3-160 mm steel version - Feed flange 160 mm - Solid grain tips - Interchangeable wheels - Quick-release steel holder size 20-2 with 2 straight inserts - Slip clutch - Micrometer longitudinal stop - Plan sled with top support - Frequency invert ...
used
1 x L+Z lathe Colchester Mascot 1600/600 Built: c.1975 Very stable lathe. Ideal machine for locksmiths or agricultural machine mechanics. Technical data: Turning diameter over crimson: 710 mm Turning diameter over bed:432 mm Turning diameter via support:267 mm Turning length: 1,000 mm Spindle speeds:20 - 1600 rpm Spindle bore:76 mm Drive motor:5.6 kW Feeds: 0.6 - 10 mm/u Metric threads: 40 (0.4 - 14 mm incline) Machine weight approx.:2000 kg Room requirements approx.:l:2.65 x w:1.1 x h:1.6 m Accessories: 3 - Jaw lining UVA 310 mm 4 Set of change jaws Bfraed8ae0 Tripan quick-change system 4 x Interchangeable holder running counter tip in tailstock (MK 5) Countertip in spindle Alternating wheels Manual Mudguard complete documentation The machine can be inspected at our warehouse in Reichenbach under electricity.
used
No. 4620: 1 gebr. Guide and pull spindle lathe Fabr. BOLEY, Type 5 LZ, Arb.-Ber.: SpH 130 x 500 mm, Other: Spindle speeds: in 22 stages 28 - 2550 min-1 Space requirement: 1.5 x 0.9 x 1.25 m Weight ca 800 kg
used
Description Universal lathe suitable for tooling, fixture construction, training and mould making Peak height: 180mm Speed:25-2000 rpm Technical data Built in 2015 Speed 25-2000 rpm Peak height 180mm (360mm) Peak width 1000mm Spindle passage 38mm Reitstock MK 3 Total power requirement 4 KW Weight 880kg Connection 50 Hz 3x 380V
new
Stepless guide and pull spindle lathe TC 250 V Peak height: 250 mm Circulation diameter via slide: 350 mm Orbital diameter in the croation: 695 mm Tip width: 1500 mm Spindle nose: DIN 55029, Camlock, size 6 Bed width: 305 mm Cross slide path: 272 mm Upper slide path: 155 mm Spindle bore: 80 mm Speed range, infinitely variable: (3) 30 - 2200 rpm Whitworth Thread: (45) 2 - 72 TPI Metric Thread: (39) 0.2 - 14 mm Diametral Thread: (21) 8 - 44 D.P.I Module Thread: (18) 0.3 - 3.5 module Longitudinal feeds: 0.04 - 1.00 mm/U Flat feeds: 0.02 - 0.50 mm/U Engine power: 5.5 kW Dimensions LxWxH, approx.: 2900 x 1175 x 2040 mm Weight, approx.: 2,200 kg characteristics: - Toolmaker accuracy - Stepless speed control (3 pre-level steps) - Finely-balanced main spindle - Stable machine bed with hardened and ground guides - One-piece cast base - Adjustable precision cone roll ...