used ROSS Eccentric Presses

Automatic traysealer is sold, for preformed containers. From the manufacturer Ross Industries, model S45. Specially designed for packaging in heat sealing format with vacuum and with modified atmosphere, to achieve greater conservation, better presentation, as well as ease of storage and transport. It automatically performs the MAP cycle, heat sealing and gas injection, perfect film trimming and automatic film collection. It has 1 sealing lasts. Dimensions of the welding area Last for sealing 3 containers at once: 250 x 180 mm. Busch 250m3/h vacuum pump Used Ross Inpack S45 preformed tray sealing machine with: Medium to high speed modified atmosphere packaging Time, temperature and pressure are monitored and controlled to provide consistent seals Contoured filler plates for minimal gas use Unique film media design to minimize film waste Automatic tray loader 3 up configuration 13 ...

ROSSO sock sewing machine

ROSSI $ CATELLI DEPOSIT WITH STEAM AND AGITATION Tank reactor cooks steam creams of 250 liters of Rossi-Catelli capacity. It has 2 agitation systems, scratching and rapid agitation. Built-in steam installation. Inox 316   Model: Vascamiscelazion Capacity: 250 liters Working pressure: 2 bar Year 2003 Weight: 800 kg Width: 1850 mm High: 2450 mm Length: 950 mm

Built: 2003 Condition: new Transmission ratio: 26.3 Input speed (n1): 2000 rpm Output speed: 76.2 rpm Efficiency: 0.94 Dimensions: Length 790 mm (without shaft), 966 mm with shaft Width: 450 mm Height: 300 mm Shaft diameter: 155 mm Weight: 352 kg For further technical information, please refer to the uploaded data sheet.

We offer you a used pallet rack manufacturer Rosss. Technical data for the pallet control stand: Shelving system: Rosss Included are: 01x Pallet rack, used Material color: sendzimir galvanized Profile: 90 x 75 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( screwed truss ) 2,000 mm high 1,100 mm deep Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection carried out in accordance with DIN EN 15635 in accordance with the Requirements of the BGR 234 visual inspection for all shelving systems Delivery with our own fleet (without discharge)

CHARLES ROSS Mixer HSM-100LH2 High speed HSM-100LH-2 Control mc series AC Tech with enclosure hydraulic control HIGHSHEAR MIXER Equipment was excellently maintained. Partly with replacement knives You buy a device here

Automatic punching machine double stand Pressure 125 ton Stroke 10 - 80 mm Stroke rate 50-300 1/min Stand width 1180 mm Table area 1150 x 850 mm Continuous opening in the table 1000 x 220 mm Plunger area 1210 x 550 mm Plunger adjustment 100 mm Material width feed 350 mm Material thickness - 6 mm Punching system incl. Feed Model RS 350 SL Levelers Kohler Reel

CNC centerless grinding machine Monzesi mod Monza 510 CNC 6 axes complete with piece loading and unloading system CNC Fanuc 160i-T Under power in our warehouse in Gussago BS. Mimu machine tools Italy

CNC centerless grinding machine Monzesi mod Monza 510 CNC 6 axes complete with piece loading and unloading system CNC Fanuc 160i-T Under power in our warehouse in Gussago BS., Mimu machine tools Italy, Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: pieces, to be worked proceed uninterruptedly with axial feed through the rectification gap., Wheel width: 250, Wheel diameter: 510, C ...

Ross Industries A10 Tray sealer Serial: 406 2011, stainless tray sealer, modified atmosphere or seal only, up to 10 trays per min, seals two tray at a time, tray dims 200mm x 160mm, adjustable temp and timer controls, 3Ph

Monzesi Rossi Monza 500 centerless grinding Grinding wheel 250 * 500 auto plunge also available The machine is in our warehouse in Gussago BS, under power Mimu machine tools, Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: pieces, to be worked proceed uninterruptedly with axial feed through the rectification gap.ith axial advancement through the grinding gap.

Gear motor, electric motor, electric gear motor -Engine manufacturer: ASEA type MBT132S -Gearbox manufacturer: Rossi, type RV125U02B -Speed: 99 rpm -Power: 5.5 kW -Construction: B3 -Hollow shaft: Ø 60 x 210 mm -Protection class: IP54 -Dimensions: 470/320/H775 mm -Weight: 149 kg

Drilling and threading machining center. • MANUFACTURER: ROSSINI • MODEL: TR-3-TV • YEAR OF CONSTRUCTION: 1989.

Ross Industries mobile tenderizer, model: IC700M, serial number: 2826WAMR, 415 V, 3 Ph, 50 Hz, 14 A, dimensions: 2000 mm x 700 mm x 1600 mm.

Ross Industries mobile traysealer, model: A10, serial number: 360, year of construction: feb 2007, 400 V, 3 Ph, 50 Hz, 30/25/15 A, film width: 440 mm, dye: (2x) 210 mm x 170 mm, Busch vacuum pump, type: RC 0100, year of construction: 2005, capacity: 100 m³ per hour, total dimensions: 1400 mm x 800 mm x 1370 mm.

Capacity: 50 ton Projection: 225 mm Stroke: 320 p/min Large table: 500 x 800 mm

Force of pressure: 75 t projection: 300 mm table size: 620 x 800 mm Durchfalloch in the table: 225 x 325 mm table adjustment: 175 mm plunger surface: 180 x 475 mm slide adjustment: 80 mm stroke adjustment: 16-140 mm stroke rate: 90 / min drive motor: 380 V, 3 kW space: 1700 x 1200 x 2500 mm weight: 3300 kg

Force of pressure: 40 t projection: 250 mm table size: 440 x 530 mm Durchfalloch in the table: 170 Ø mm table adjustment: 220 mm plunger surface: 200 x 280 mm slide adjustment: 60 mm stroke adjustment: 8-80 mm stroke rate: 100 / min drive motor: 380 V, 2.5 kW space: 950 x 1450 x 2050 mm weight: 2400 kg

Eccentric press make RUHRMANN type ASR 45Ser. -No: 14326 Year 1996Press force: 45 tRam adjustment: 100 mmadjustable stroke: 20 - 200 mmPusher strokes: 40 - 160 per minuteTable size: 900 x 800 mmPlunger surface: 600 x 400 mmlargest distance table - ram: 800 mmInstallation height: 790 mmDiarrhea hole: 400 x 600 mmMax. Tool weight: 500 kgMotor power: 7.5 kWWeight approx: 7800 kgExternal dimensions approx: 1400 x 1600 x 3100 mmWith- Control Siemens Simatic OP 7- transverse shaft- swiveling control panel- Electric control cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press make WEINGARTEN type ARV 63Order number. 121101, built in 1971Technical specifications:Pressing force: 63 tgr. sheet thickness: 10 mmDischarge: 270 mmTable: 760 x 480 mmDiarrhea hole in the table: 250 x 150 mmNumber of strokes: 56 and 84 / mingr. distance table - ram: 500 mmkl. Distance table - ram: 200 mmRam stroke: 8 - 100 mmRam adjustment: 63 mmExternal dimensions L x W x H: 900 x 2000 x 2600 mmWeight approx: 4 tonsWith- UVV for inlays- EMERGENCY STOP SWITCHused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press fabr. HELMERDING type PEP 12/15 BMasch. -No: 831184, year of construction 1988Technical specifications:Nominal force: 12 tMax. Ram stroke: 60 mmThroat: 160 mmTable surface area: 315 x 400 mmAdjustment of the ram: 40 mmMax. Strokes: 180 rpm.Ram area: 100 x 125 mmDrive power: 1.1 kWWith- 2 hand release- foot switch- separate control cabinet- Ortlinghaus additional brake and hydr. Multi-plate clutch- according to UVVused in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press MABU type 12 TFprobably built in 1984Technical specifications:Pressing force: 12 tStroke adjustment: 6 - 60 mmTable size: 380 x 270 mmDiarrhea: 100 mmBear size: 120 x 100 mmInstallation height: 210 mmThroat: 145 mmDrive power: 1.1 kWExternal dimensions approx: 800 x 900 x 1750 mmWith- pneum. Friction clutch Control BA 1.1 for with / without movable protection Movable security not available!- height adjustable table- foot switch- stroke counterused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press make MÜLLER type ExP 35Machine -No: 927171 built in 1971Technical specifications:Printing capacity: 35 tProjection: 220 mmRam strokes: 110 HpM.Adjustable ram: 53 mmAdjustable stroke: 1 - 70 mmTable surface area: 580 x 495 mmMotor power: 3.0 HPDimensions approx: 1100 x 1300 x 2000 mmWeight approx: 3500 kgWith- Protective screen- foot switch- height adjustable table- Protective screenused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Table eccentric press make MÜLLER type ExPT 12Machine -No: 0331188 built in 1988Technical specifications:Max. Punching capacity: 12 tProjection: 160 mmStrokes per minute: 120Slide adjustment: 40 mmAdjustable stroke: 8 - 80 mmTable size approx: 490 x 300 mmDrive power: 1.1 kWDimensions approx .: 2100 x 1200 x 1950 mmWeight approx: 2500 kgWith- pneumatic coupling- AMT material feed deviceused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Eccentric press make HEILBRONN type EPT 6Fabr. -No: 4869, built in 1986Technical specifications:Pressure force: 6.3 tThroat: 130 mmTable size: 320 x 240 mmThrough hole in the table: 80 mmTable height: 800 mmMax. Installation height: 155 mmRam surface: 128 x 180 mmSlide adjustment: 30 mmStroke adjustment: 6 - 60 mmStroke rate: 180 H / minDrive power: 0.5 kWDimensions approx: 1000 x 1000 x 1800 mm mmWeight about: 500 kgWith- flywheel drive- Two-handed disengagement- Manual inlays 11062/11064- foot switch- Two-hand and single stroke- separate control cabinetused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools